Simulation-Informed Diffusion for Decentralized Multi-robot Motion Planning

arXiv:2605.27697 · cs.RO, cs.AI, cs.LG · Submitted 2026-05-26 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Simulation-Informed Diffusion for Decentralized Multi-robot Motion Planning".

Dev: Here's the gist of the paper. Decentralized multi-robot motion planning requires each robot to generate collision-free trajectories from local observations, without global sensing or reliable communication <ref:2605.27697#pg2> This paper introduces Simulation-Informed Diffusion (SID), a decentralized framework built on constraint-aware diffusion models (CADM) <ref:2605.27697#pg2> SID first uses CADM to simulate the future trajectories of neighboring robots from their currently observed states, and then uses the same CADM to plan each robot’s own trajectory under safety constraints informed by these simulations <ref:2605.27697#pg3> Crucially, the accurate simulation of neighbors enables a minimal communication scheme that triggers coordination only when necessary in highly congested scenarios <ref:2605.27697#pg2> Pruning redundant reasoning tokens Multi-Robot Motion Planning (MRMP) seeks collision-free trajectories for multiple robots operating in a shared environment, and underpins applications ranging from automated warehouses to drone fleets and autonomous driving systems <ref:2605.27697#pg2> Many MRMP methods assume a centralized planner with full access to all robot states <ref:2605.27697#pg2> The key challenge in such settings is to generate collision-free trajectories from local observations with minimal communication <ref:2605.27697#pg2> A common way to address this decentralized planning problem is to compute feasible actions or trajectories based on the current local observation <ref:2605.27697#pg2> Reactive methods, such as ORCA

Van Den Berg et al., 2011: , select an immediate feasible action by reasoning over the current positions and velocities of nearby robots and obstacles <ref:2605.27697#pg2> These methods are efficient and decentralized, but they are inherently myopic: a feasible action computed from a single snapshot ignores future interactions and may fail in dense environments <ref:2605.27697#pg2> Finally, prediction-based planning methods predict future trajectories of neighboring robots and use them as planning references <ref:2605.27697#pg2> This mismatch ultimately undermines the reliability of these references for decentralized planning <ref:2605.27697#pg2> How the training signal is built The paper introduces a constraint-aware diffusion model (CADM) which generates trajectories that satisfy collision-avoidance and kinematic constraints <ref:2605.27697#pg5> CADM augments standard diffusion sampling with a proximal term and uses a Lagrangian dual method to solve the resulting constrained optimization problem <ref:2605.27697#pg5> As a simulator, CADM generates accurate future trajectories for neighboring robots from their current observed states <ref:2605.27697#pg5> As a planner, it combines these simulated trajectories with the current local observation to generate a collision-free trajectory by projecting diffusion samples onto the planning constraint set <ref:2605.27697#pg5> The projection step modifies the SGLD update in Eq.

Rosa: 4 to include a projection step: xt =PC(xt+1 + ϵ squared sθ(xt+1, t+1)+√ϵz, (5) <ref:2605.27697#pg5> This projection enforces feasibility at every sampling step and guides the diffusion model toward constraint-satisfying trajectories <ref:2605.27697#pg5> The projection sub-problem is solved by leveraging the classical primal-dual optimization method <ref:2605.27697#pg5> Where the gains come from The accuracy of this constraint-aware diffusion-based simulator enables each robot to greatly minimize communication <ref:2605.27697#pg2> The proposed communication scheme triggers messages only when local planning cannot resolve a conflict <ref:2605.27697#pg2> In particular, SID develops a communication mechanism driven by simulation-informed conflict detection <ref:2605.27697#pg2> When this trigger fires, robot i first identifies the robots involved in the unresolved local interaction <ref:2605.27697#pg2> The fallback planner replans robots in Bi according to this priority order, as shown in Algorithm 2 <ref:2605.27697#pg2> Thus, communication is restricted to the bottleneck set, and each robot transmits at most one trajectory during a fallback episode <ref:2605.27697#pg2> Pruning redundant reasoning tokens The paper evaluates SID across diverse environments showing that SID consistently outperforms baseline methods in terms of planning effectiveness and constraint satisfaction <ref:2605.27697#pg2> Experiments across diverse environments show that SID consistently outperforms baseline methods in terms of planning effectiveness and constraint satisfaction, and scales to scenarios with 108 robots and 160 obstacles <ref:2605.27697#pg2> SID outperforms representative reactive, learningbased, and prediction-based planning methods (ORCA

Van Den Berg et al., 2011: , IA-MPC

Zhu et al., 2021: , and MIMIC-D

Dong et al., 2025: ) in trajectory quality and constraint satisfaction <ref:2605.27697#pg2> SID maintains high success across 18 robots: 100%, 92%, and 80% on Basic maps, and 92%, 96%, and 88% on Dense maps <ref:2605.27697#pg2> SID communicates sparsely, with frequency at most 0.41 compared with the fixed value of eight for IA-MPC <ref:2605.27697#pg2> Where the gains come from SID achieves perfect success on Basic and Dense maps with up to nine robots, and reaches 84% and 96% success on Room and Shelf maps with nine robots <ref:2605.27697#pg2> These results improve over the strongest baseline by 4.2× and 8.0× on the two structured maps <ref:2605.27697#pg2> SID also requires much less communication than IA-MPC <ref:2605.27697#pg2> Pruning redundant reasoning tokens SID maintains high success across 18 robots: 100%, 92%, and 80% on Basic maps, and 92%, 96%, and 88% on Dense maps <ref:2605.27697#pg2> SID is the only successful method on Basic maps at the team size of eighteen <ref:2605.27697#pg2> The complete procedure is summarized in Algorithm 1 <ref:2605.27697#pg2> Where the gains come from SID can coordinate many robots through cluttered regions and narrow passages while preserving decentralized execution, illustrating the scalability of the proposed simulation-guided planning and communication mechanism beyond the standard benchmark sizes <ref:2605.27697#pg2> SID preserves decentralization by keeping both simulation and planning local to each robot <ref:2605.

Title and authors: Rosa: So we started with the title Simulation-Informed Diffusion for Decentralized Multi-robot Motion Planning by Liang, Koenig, and Fioretto. It sounds pretty technical, but it points directly at solving that core issue of decentralized motion planning without global knowledge.

Dev: Yeah, the authors are experts in diffusion models and constraint optimization. They’re essentially building a system where the AI model does two jobs: simulating the future movement of others and then planning its own move based on that simulation.

Taro: What I find interesting is that they are using generative models for motion planning instead of just searching for a single path under some cost function. That means they learn distributions over feasible trajectories, which is important when the solution space is really complex, like in cluttered environments.

Rosa: That’s right. Instead of just finding one good path, you get a spread of possible paths that fit the constraints and look physically plausible.

Dev: And to make sure those generated trajectories actually follow the rules—like avoiding collisions or respecting kinematic limits—they augment standard diffusion sampling with a proximal term and use a Lagrangian dual method to solve the constrained optimization problem.

Taro: I wonder about how robust this constraint aware diffusion model is when it’s generating these future paths for neighbors, especially if their own movements are unpredictable.

Rosa: That’s what they are testing. The goal is to make sure the simulator doesn't just spit out random movement, but trajectories that actually satisfy collision avoidance and kinematic constraints.

Dev: And they show that this setup allows the model to generate accurate future trajectories for neighboring robots based on their current observations.

Taro: So, if we look at it from a real-world perspective, what does this mean for how a robot decides what to do when it’s operating in an unknown or changing environment?

The paper's summary: Rosa: What the paper summarizes is that SID uses the constraint aware diffusion model, CADM, as both the simulator and the planner simultaneously. It takes local observations, simulates future neighbor trajectories with CADM to check for safety issues, and then plans its own trajectory using those simulated constraints.

Dev: So it moves beyond just reacting to what’s right now; it looks ahead by using the AI model to predict what others will do over a planning horizon.

Taro: The paper mentions that this approach is particularly attractive because generative models handle multimodal solution spaces better than traditional planners, which can be really helpful in complex scenarios where there are multiple ways to move around.

Rosa: It means instead of getting stuck on one local optimum, the robot gets a set of options informed by those simulated interactions, which should lead to better overall planning.

Dev: They also show that this architecture is much better than previous decentralized methods because it addresses the limitation where planners only condition each robot on local observations without anticipating future neighbor behavior.

Taro: And they address the communication problem directly by showing how the simulation-informed conflict detection triggers messages only when local planning cannot resolve a conflict under those simulated constraints.

Rosa: So to summarize, SID uses a generative model to look ahead, plan safely based on that look-ahead, and only talks to others when it truly can't figure out what to do by itself.

The paper's improvements: Dev: The main improvement they highlight is the capability of CADM to generate trajectories that satisfy collision avoidance and kinematic constraints. It does this by augmenting standard diffusion sampling with a proximal term and using a Lagrangian dual method for the optimization problem.

Rosa: And they showed how this constraint aware diffusion model actually acts as both the simulator and the planner, which streamlines things compared to having separate components for those roles.

Taro: They also show that this projection step in the planning process is key; it modifies a standard update, like an SGLD update, to include a projection step that enforces feasibility at every sampling step.

Dev: That projection subproblem is solved using the classical primal dual optimization method, which helps guide the diffusion model toward those constraint-satisfying trajectories throughout the generation process.

Rosa: From my field robotics side, what this means for me is that I can rely on this system to generate paths that are kinematically sound and don't just look good on paper; they actually respect the physical limits of the robot.

Taro: And when we look at the results, it’s pretty impressive. They show that SID consistently outperforms various baseline methods in terms of both planning effectiveness and constraint satisfaction across different environments.

Dev: Specifically, they test this on scenarios with eighteen robots and one hundred sixty obstacles, showing success rates up to one hundred percent on basic maps and high percentages like ninety-two percent or eighty-eight percent on dense maps.

Rosa: And they noted that SID communicates much more sparsely than some other methods; for instance, its frequency is at most zero point four one compared to a fixed value of eight in IA-MPC.

Conclusion: Dev: So to wrap up the Simulation-Informed Diffusion for Decentralized Multi-robot Motion Planning paper, the main implication is that by using CADM as both simulator and planner, we can achieve decentralized motion planning that anticipates future neighbor behavior while keeping communication minimal.

Rosa: It means robots can coordinate effectively through cluttered regions and narrow passages while still executing their plan locally, which is crucial for scaling up to larger teams of robots.

Taro: What I add is that the system maintains decentralization because both the simulation and the planning happen right there on each robot, which keeps it resilient when communication drops out.

Dev: And they show this works across a lot of different setups, achieving high success rates even with eighteen robots on basic maps.

Rosa: So we’ve seen how simulation-informed conflict detection allows for very sparse communication, only triggering messages when local planning hits a wall under the simulated constraints. It’s a solid piece of work for making decentralized systems more practical.

Taro: For me, it shows that this simulation-guided planning and communication mechanism is scalable beyond just benchmark sizes, proving it can handle complex coordination while keeping execution decentralized.

Dev: So the Simulation-Informed Diffusion for Decentralized Multi-robot Motion Planning paper is a significant step toward building robust, scalable motion planning systems that don't need constant global awareness.

Jinhao Liang, Sven Koenig, Ferdinando Fioretto

University of Virginia · University of California, Irvine

cs.RO, cs.AI, cs.LG

Submitted: 2026-05-26

Updated: 2026-11-14

Comments: Published at the Fortieth Annual Conference on Neural Information Processing Systems (NeurIPS 2026)

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 91/100

The gist: Decentralized multi-robot motion planning requires each robot to generate collision-free trajectories from local observations…

Key concepts

Constraint-Aware Diffusion Model (CADM)
CADM is a specialized diffusion model that generates robot trajectories which inherently satisfy physical constraints like collision avoidance and kinematic limits. It achieves this by augmenting standard diffusion sampling with a proximal term and using a Lagrangian dual method to solve complex optimization problems, ensuring the simulated paths are always feasible.
Simulation-Informed Conflict Detection
This mechanism is the core of SID's communication strategy. Instead of constant messaging, robots only communicate when their local planning cannot resolve an imminent conflict based on simulations. This simulation-informed trigger ensures that communication is sparse and only occurs when necessary to avoid collisions.
Decentralized Planning with Local Simulation
The framework allows each robot to plan its own trajectory entirely based on its local observations and the simulated future states of nearby robots. This approach eliminates the need for a central planner or global sensing, enabling true decentralization where planning decisions are made locally by each agent.
Projection Step in Diffusion Sampling
During planning, SID incorporates a projection step into the diffusion sampling process. This step modifies how samples are generated to enforce feasibility at every single time step. It guides the diffusion model to produce trajectories that strictly adhere to predefined safety and kinematic constraints.

Terminology

Summary

Decentralized multi-robot motion planning requires each robot to generate collision-free trajectories from local observations, without global sensing or reliable communication <ref:2605. p. 0

Where the paper says it

edu Ferdinando Fioretto University of Virginia fioretto@virginia. edu ABSTRACT Decentralized multi-robot motion planning requires each robot to generate collision-free trajectories from local observations, without global sensing or reliable communication.

27697#pg2> This paper introduces Simulation-Informed Diffusion (SID), a decentralized framework built on constraint-aware diffusion models (CADM) <ref:2605. p. 0
Where the paper says it

This limitation is critical as the number of robots increases and the environment becomes more cluttered. To overcome this challenge, this paper introduces Simulation-Informed Diffusion (SID), a decentralized framework built on constraint-aware diffusion models (CADM).

27697#pg2> SID first uses CADM to simulate the future trajectories of neighboring robots from their currently observed states, and then uses the same CADM to plan each robot’s own trajectory under safety constraints informed by these simulations <ref:2605. p. 0
Where the paper says it

To overcome this challenge, this paper introduces Simulation-Informed Diffusion (SID), a decentralized framework built on constraint-aware diffusion models (CADM). SID first uses CADM to simulate the future trajectories of neighboring robots from their currently observed states, and then uses the same CADM to plan each robot’s own trajectory under safety constraints informed by these simulations.

27697#pg3> Crucially, the accurate simulation of neighbors enables a minimal communication scheme that triggers coordination only when necessary in highly congested scenarios <ref:2605. p. 0
Where the paper says it

SID first uses CADM to simulate the future trajectories of neighboring robots from their currently observed states, and then uses the same CADM to plan each robot’s own trajectory under safety constraints informed by these simulations. Crucially, the accurate simulation of neighbors enables a minimal communication scheme that triggers coordination only when necessary in highly congested scenarios.

27697#pg2>

Pruning redundant reasoning tokens

Multi-Robot Motion Planning (MRMP) seeks collision-free trajectories for multiple robots operating in a shared environment, and underpins applications ranging from automated warehouses to drone fleets and autonomous driving systems <ref:2605.27697#pg2> Many MRMP methods assume a centralized planner with full access to all robot states <ref:2605. p. 0

Where the paper says it

Keywords Diffusion models · Decentralized multi-robot motion planning 1 Introduction Multi-Robot Motion Planning (MRMP) seeks collision-free trajectories for multiple robots operating in a shared environment, and underpins applications ranging from automated warehouses to drone fleets and autonomous driving systems [Antonyshyn et al. Many MRMP methods assume a centralized planner with full access to all robot states [Liang et al.

27697#pg2> The key challenge in such settings is to generate collision-free trajectories from local observations with minimal communication <ref:2605. p. 0
Where the paper says it

However, this assumption is often violated in practical systems, where communication may be limited or unreliable, and each robot may operate under partial observability of the environment [Chen et al. The key challenge in such settings is to generate collision-free trajectories from local observations with minimal communication.

27697#pg2> A common way to address this decentralized planning problem is to compute feasible actions or trajectories based on the current local observation <ref:2605. p. 0
Where the paper says it

The key challenge in such settings is to generate collision-free trajectories from local observations with minimal communication. A common way to address this decentralized planning problem is to compute feasible actions or trajectories based on the current local observation.

27697#pg2> Reactive methods, such as ORCA [Van Den Berg et al. p. 0
Where the paper says it

A common way to address this decentralized planning problem is to compute feasible actions or trajectories based on the current local observation. In particular, reactive methods, such as ORCA [Van Den Berg et al.

, 2011], select an immediate feasible action by reasoning over the current positions and velocities of nearby robots and obstacles <ref:2605. p. 0
Where the paper says it

In particular, reactive methods, such as ORCA [Van Den Berg et al. , 2011], select an immediate feasible action by reasoning over the current positions and velocities of nearby robots and obstacles.

27697#pg2> These methods are efficient and decentralized, but they are inherently myopic: a feasible action computed from a single snapshot ignores future interactions and may fail in dense environments <ref:2605. p. 0
Where the paper says it

, 2011], select an immediate feasible action by reasoning over the current positions and velocities of nearby robots and obstacles. These methods are efficient and decentralized, but they are inherently myopic: a feasible action computed from a single snapshot ignores future interactions and may fail in dense environments.

27697#pg2> Finally, prediction-based planning methods predict future trajectories of neighboring robots and use them as planning references <ref:2605. p. 0
Where the paper says it

These methods can capture more complex relationships between observations and actions, extending the reactive paradigm but inherit its myopia, since plans still derive from the current observation alone. Finally, prediction-based planning methods predict future trajectories of neighboring robots and use these as planning references [Zhu et al.

27697#pg2> This mismatch ultimately undermines the reliability of these references for decentralized planning <ref:2605. p. 0
Where the paper says it

This mismatch ultimately undermines the reliability of these references for decentralized planning. arXiv:2605.

27697#pg2>

How the training signal is built

The paper introduces a constraint-aware diffusion model (CADM) which generates trajectories that satisfy collision-avoidance and kinematic constraints <ref:2605.27697#pg5> CADM augments standard diffusion sampling with a proximal term and uses a Lagrangian dual method to solve the resulting constrained optimization problem <ref:2605. p. 1

Where the paper says it

To overcome these challenges, this paper introduces Simulation-Informed Diffusion (SID), a decentralized framework in which each robot uses a single constraint-aware diffusion model (CADM) as both simulator and planner. The proposed constraint-aware diffusion model generates trajectories that satisfy collision-avoidance and kinematic constraints; it augments standard diffusion sampling with a proximal term and uses a Lagrangian dual method to solve the resulting constrained optimization problem.

27697#pg5> As a simulator, CADM generates accurate future trajectories for neighboring robots from their current observed states <ref:2605. p. 1
Where the paper says it

The proposed constraint-aware diffusion model generates trajectories that satisfy collision-avoidance and kinematic constraints; it augments standard diffusion sampling with a proximal term and uses a Lagrangian dual method to solve the resulting constrained optimization problem. As a simulator, CADM generates accurate future trajectories for neighboring robots from their current observed states.

27697#pg5> As a planner, it combines these simulated trajectories with the current local observation to generate a collision-free trajectory by projecting diffusion samples onto the planning constraint set <ref:2605. p. 1
Where the paper says it

As a simulator, CADM generates accurate future trajectories for neighboring robots from their current observed states. As a planner, it combines these simulated trajectories with the current local observation to generate a collision-free trajectory by projecting diffusion samples onto the planning constraint set.

27697#pg5> The projection step modifies the SGLD update in Eq. p. 3
Where the paper says it

Operationally, CADM modifies the SGLD update in Eq. 4 to include a projection step: xt =PC xt+1 + ϵ 2 sθ(xt+1, t+1)+√ ϵz , (5) where PC(xt) = arg miny∈C ∥y − xt∥ 2 2 is the Euclidean projection operator onto the constraint set C.

4 to include a projection step: xt =PC(xt+1 + ϵ squared sθ(xt+1, t+1)+√ϵz, (5) <ref:2605. p. 3
Where the paper says it

Operationally, CADM modifies the SGLD update in Eq. 4 to include a projection step: xt =PC xt+1 + ϵ 2 sθ(xt+1, t+1)+√ ϵz , (5) where PC(xt) = arg miny∈C ∥y − xt∥ 2 2 is the Euclidean projection operator onto the constraint set C.

27697#pg5> This projection enforces feasibility at every sampling step and guides the diffusion model toward constraint-satisfying trajectories <ref:2605. p. 3
Where the paper says it

4 to include a projection step: xt =PC xt+1 + ϵ 2 sθ(xt+1, t+1)+√ ϵz , (5) where PC(xt) = arg miny∈C ∥y − xt∥ 2 2 is the Euclidean projection operator onto the constraint set C. This projection enforces feasibility at every sampling step and guides the diffusion model toward constraint-satisfying trajectories.

27697#pg5> The projection sub-problem is solved by leveraging the classical primal-dual optimization method <ref:2605. p. 3
Where the paper says it

We write C = {y | h(y) ≤ 0}, where h(y) stacks the collision-avoidance and kinematic inequality constraints, and solve the resulting projection problem using the augmented Lagrangian: Lρ(y, ν) = ∥y − xt∥ 2 2 + ν ⊤h(y) + ρ 2 ∥ max(0, h(y))∥ 2 2 , (6) where ν ≥ 0 are the Lagrange multipliers and ρ > 0 is the penalty parameter. The projection sub-problem is solved by leveraging the classical primal-dual optimization method: we alternate gradient descent on the primal variable y and dual ascent on ν, with update ν ← max(0, ν + ρ h(y)) [Neal et al.

27697#pg5>

Where the gains come from

The accuracy of this constraint-aware diffusion-based simulator enables each robot to greatly minimize communication <ref:2605.27697#pg2> The proposed communication scheme triggers messages only when local planning cannot resolve a conflict <ref:2605. p. 1

Where the paper says it

Crucially, the accuracy of this constraint-aware diffusion-based simulator enables each robot to greatly minimize communication. The proposed communication scheme triggers messages only when local planning cannot resolve a conflict, eliminating unnecessary exchange in sparse conditions.

27697#pg2> In particular, SID develops a communication mechanism driven by simulation-informed conflict detection <ref:2605. p. 1
Where the paper says it

The proposed communication scheme triggers messages only when local planning cannot resolve a conflict, eliminating unnecessary exchange in sparse conditions. In particular, SID develops a communication mechanism driven by simulation-informed conflict detection.

27697#pg2> When this trigger fires, robot i first identifies the robots involved in the unresolved local interaction <ref:2605. p. 5
Where the paper says it

The mechanism therefore remains inactive during routine planning and activates only when local planning becomes infeasible. Algorithm 2 Minimal Communication Mechanism 1: Input: Robot i, planning constraint Cplan(i), neighbors Ni 2: Identify bottleneck set Bi ⊆ Ni ∪ {i} 3: Compute dj = ∥pj − gj∥2 for all j ∈ Bi 4: Rank robots in Bi by ascending dj 5: Remove inter-robot constraints involving Bi \ {i} from Cplan(i) 6: if i is not first in this order then 7: Receive one trajectory τj from each earlier robot j 8: Add τj to Cplan(i) for each earlier robot j 9: end if 10: Generate τi under the updated Cplan(i) 11: Broadcast τi once to later robots in Bi 12: return τi When this trigger fires, robot i first identifies the robots involved in the unresolved local interaction.

27697#pg2> The fallback planner replans robots in Bi according to this priority order, as shown in Algorithm 2 <ref:2605. p. 5
Where the paper says it

Robots with smaller dj receive higher priority, which yields a deterministic passing order, as illustrated in Figure 2, panels (c) and (d). The fallback planner replans robots in Bi according to this priority order, as shown in Algorithm 2.

27697#pg2> Thus, communication is restricted to the bottleneck set, and each robot transmits at most one trajectory during a fallback episode <ref:2605. p. 5
Where the paper says it

After replanning, it broadcasts its own trajectory to later robots in Bi . Thus, communication is restricted to the bottleneck set, and each robot transmits at most one trajectory during a fallback episode.

27697#pg2>

The paper evaluates SID across diverse environments showing that SID consistently outperforms baseline methods in terms of planning effectiveness and constraint satisfaction <ref:2605.27697#pg2> Experiments across diverse environments show that SID consistently outperforms baseline methods in terms of planning effectiveness and constraint satisfaction, and scales to scenarios with 108 robots and 160 obstacles <ref:2605. p. 0

Where the paper says it

Crucially, the accurate simulation of neighbors enables a minimal communication scheme that triggers coordination only when necessary in highly congested scenarios. Experiments across diverse environments show that SID consistently outperforms baseline methods in terms of planning effectiveness and constraint satisfaction, and scales to scenarios with 108 robots and 160 obstacles.

27697#pg2> SID outperforms representative reactive, learningbased, and prediction-based planning methods (ORCA [Van Den Berg et al. p. 1
Where the paper says it

Robots exchange messages only when local simulation and planning cannot resolve predicted conflicts, reducing communication while maintaining planning performance. In an extensive MRMP benchmark of increasing size and complexity, SID outperforms representative reactive, learningbased, and prediction-based planning methods (ORCA [Van Den Berg et al.

, 2011], IA-MPC [Zhu et al. p. 1
Where the paper says it

In an extensive MRMP benchmark of increasing size and complexity, SID outperforms representative reactive, learningbased, and prediction-based planning methods (ORCA [Van Den Berg et al. , 2011], IA-MPC [Zhu et al.

, 2021], and MIMIC-D [Dong et al. p. 1
Where the paper says it

, 2011], IA-MPC [Zhu et al. , 2021], and MIMIC-D [Dong et al.

, 2025]) in trajectory quality and constraint satisfaction <ref:2605. p. 1
Where the paper says it

, 2021], and MIMIC-D [Dong et al. , 2025]) in trajectory quality and constraint satisfaction, and in large-scale congested scenarios it remains effective using up to 108 robots and 160 obstacles.

27697#pg2> SID maintains high success across 18 robots: 100%, 92%, and 80% on Basic maps, and 92%, 96%, and 88% on Dense maps <ref:2605. p. 7
Where the paper says it

As the team grows from 12 to 18 robots, ORCA drops from 28% to 0% on Basic maps and from 8% to 4% on Dense maps. SID maintains high success across 12, 15, and 18 robots: 100%, 92%, and 80% on Basic maps, and 92%, 96%, and 88% on Dense maps.

27697#pg2> SID communicates sparsely, with frequency at most 0. p. 7
Where the paper says it

At 18 robots, SID is the only successful method on Basic maps and exceeds ORCA by 84 percentage points on Dense maps. SID communicates sparsely, with frequency at most 0.

41 compared with the fixed value of eight for IA-MPC <ref:2605. p. 7
Where the paper says it

SID communicates sparsely, with frequency at most 0. 41 compared with the fixed value of eight for IA-MPC.

27697#pg2>

SID achieves perfect success on Basic and Dense maps with up to nine robots, and reaches 84% and 96% success on Room and Shelf maps with nine robots <ref:2605.27697#pg2> These results improve over the strongest baseline by 4. p. 7

Where the paper says it

In contrast, SID achieves perfect success on Basic and Dense maps with up to nine robots, and reaches 84% and 96% success on Room and Shelf maps with nine robots. These results improve over the strongest baseline by 4.

2× and 8.0× on the two structured maps <ref:2605. p. 7
Where the paper says it

These results improve over the strongest baseline by 4. 0× on the two structured maps.

27697#pg2> SID also requires much less communication than IA-MPC <ref:2605. p. 7
Where the paper says it

0× on the two structured maps. SID also requires much less communication than IA-MPC.

27697#pg2>

SID maintains high success across 18 robots: 100%, 92%, and 80% on Basic maps, and 92%, 96%, and 88% on Dense maps <ref:2605.27697#pg2> SID is the only successful method on Basic maps at the team size of eighteen <ref:2605. p. 7

Where the paper says it

SID maintains high success across 12, 15, and 18 robots: 100%, 92%, and 80% on Basic maps, and 92%, 96%, and 88% on Dense maps. At 18 robots, SID is the only successful method on Basic maps and exceeds ORCA by 84 percentage points on Dense maps.

27697#pg2> The complete procedure is summarized in Algorithm 1 <ref:2605. p. 4
Where the paper says it

This combined constraint keeps the trajectory safe with respect to obstacles and simulated neighbors while ensuring that it reaches the goal by the conservative target step and remains there afterward. The complete procedure is summarized in Algorithm 1.

27697#pg2>

SID can coordinate many robots through cluttered regions and narrow passages while preserving decentralized execution, illustrating the scalability of the proposed simulation-guided planning and communication mechanism beyond the standard benchmark sizes <ref:2605.27697#pg2> SID preserves decentralization by keeping both simulation and planning local to each robot <ref:2605. p. 8

Where the paper says it

We also highlight eight robots with longer travel paths, showing that SID remains effective for both short-range and long-horizon agents within the same dense environment. This finding is important because the method is not simply scaling a centralized diffusion planner to more robots; instead, it preserves decentralization by keeping both simulation and planning local to each robot.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can generate collision-free trajectories from local observations by simulating future trajectories of neighboring robots using a constraint aware diffusion model (CADM). This allows for planning that accounts for spatial and temporal interactions over the planning horizon.

  2. The system can minimize communication by using a simulation-informed conflict detection mechanism, where robots only exchange messages when local simulation and planning cannot resolve predicted conflicts, thus reducing unnecessary exchange in sparse conditions.

  3. The decentralized planner can adapt to evolving interactions using a receding-horizon control scheme, where it acquires a new local observation, re-simulates neighbor trajectories, and replans over the next horizon after execution.

  4. The system can ensure goal reaching efficiency by estimating an adaptive arrival time for each robot at each planning round and imposing it as a goal-holding constraint, allowing the planner to reduce travel time while preserving safe goal reaching.

  5. In highly congested scenarios, the system can resolve symmetry in simultaneous interactions by activating a minimal communication mechanism that ranks robots in a bottleneck set based on their remaining distance to goal, yielding a deterministic passing order.

Abstract

Decentralized multi-robot motion planning requires each robot to generate collision-free trajectories from local observations, without global sensing or reliable communication. However, most existing planners, whether classical or learning-based, generate trajectories from a static snapshot of the local observation, which limits their ability to anticipate the future behavior of neighboring robots. This limitation is critical as the number of robots increases and the environment becomes more cluttered. Motivated by world models that use future state estimation to improve planning decisions, this paper introduces Simulation-Informed Diffusion (SID), a decentralized framework built on constraint-aware diffusion models (CADM) that simulate neighboring robots' future trajectories to guide each robot's own planning. SID first uses CADM to simulate the future trajectories of neighboring robots from their currently observed states, and then uses the same CADM to plan each robot's own trajectory under safety constraints informed by these simulations. Crucially, the accurate simulation of neighbors enables a minimal communication scheme that triggers coordination only when necessary in highly congested scenarios. Experiments across diverse environments show that SID consistently outperforms baseline methods in terms of planning effectiveness and constraint satisfaction, and scales to scenarios with 108 robots and 160 obstacles.

Sources

Related papers