Freeze-in SU(2) vector dark matter at low reheating temperature

arXiv:2605.24473 · hep-ph · Submitted 2026-05-23 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "Freeze-in SU(2) vector dark matter at low reheating temperature".

Mira: Here's the gist of the paper. The freeze-in mechanism for dark matter (DM) requires extremely feeble interactions with the Standard Model (SM), preventing thermal equilibrium in the early Universe and typically evading experimental detection.

Kai: In this work, we investigate freeze-in production of SU(2)HS vector dark matter (VDM) in a low-TRH cosmology.

Mira: Model Description The paper considers an extension of the Standard Model (SM) by a non-Abelian gauge symmetry SU(2)HS, where SM particles are singlets under this new gauge group.

Kai: The model includes a BSM scalar doublet ϕ whose vacuum expectation value (VEV) spontaneously breaks the SU(2)HS, generating the mass of the DM candidate X.

Paper summary: Kai: So, wrapping up "Freeze-in SU(two) vector dark matter at low reheating temperature", the paper lays out a minimal BSM scenario based on the hidden SU(two)HS gauge symmetry <ref:2605.24473#pg1,Freeze-in SU(2) vector dark matter at low reheating temperature>. They show that this setup naturally generates three spin one vector gauge bosons, Xi.

Mira: And the stability of these Xi particles is guaranteed by an accidental custodial SO(three) symmetry arising from the SU(two)HS breaking without needing extra discrete symmetries <ref:2605.24473#pg3>. This framework allows for a freeze-in dark matter production mechanism where the couplings are stronger than in vanilla freeze-in models, but still within testable bounds.

Lev: From an engineering view, this means we're looking at a model where the DM is produced via these vector interactions rather than just simple scalar decays or annihilations. The key hurdle they identify is that you need to be careful about how the coupling g phi changes with the reheating temperature TRH because of that exponential suppression <ref:2605.24473#pg1, #pg2>.

Kai: Exactly. The paper shows that for a fixed dark matter mass, a larger gauge coupling g phi is needed to get the right relic density as the reheating temperature drops. This behavior comes directly from that Boltzmann suppression effect <ref:2605.24473#pg1>.

Mira: So in simple terms, this means if you're designing a dark matter model, you don't have to stick strictly to the usual freeze-out thermal production picture. You can explore scenarios where strong couplings are needed at lower temperatures and still get the right answer.

Lev: It suggests that the phenomenology of VDM in this SU(two)HS setup might be testable in future experiments like DARWIN, given these new coupling requirements <ref:2605.24473#pg1>.

Kai: That's it for this piece on "Freeze-in SU(two) vector dark matter at low reheating temperature" <ref:2605.24473#pg1,Freeze-in SU(2) vector dark matter at low reheating temperature>. It opens up a new way to think about how weak interactions can still produce dark matter candidates.

Conclusion: Kai: So, to wrap up this piece on "Freeze-in SU(two) vector dark matter at low reheating temperature," we looked at how these specific interactions work and what it actually means for finding this kind of dark matter in the universe.

Mira: The authors are looking at a minimal beyond the standard model scenario involving a hidden non-Abelian gauge symmetry, specifically SU(two)HS, which gives us three spin one vector dark matter candidates called Xi.

Lev: And they found that the stability of these Xi particles comes from an accidental custodial SO(three) symmetry that appears just from how they break the SU(two)HS group. That’s a neat feature because usually you need to add those extra discrete symmetries yourself.

Kai: It means we're dealing with vector dark matter that can be stable without needing those extra ad hoc rules, which is important for building consistent models.

Mira: The core finding is about the production rate: they show that if the reheating temperature of the early universe gets really low, you actually need stronger interactions between the dark matter and Standard Model particles to still get enough dark matter relic density.

Lev: That strong coupling requirement is what makes this setup interesting because it pushes us away from simpler freeze-in scenarios we usually think about.

Kai: The authors suggest that for a fixed mass of the dark matter, you need a larger gauge coupling, g phi, to get the right final abundance when the reheating temperature drops. That’s a big shift in parameter space compared to standard models.

Mira: So what this implies is that for vector dark matter in this SU(two)HS setup, we might be looking at couplings that are stronger than what we usually expect from minimal models.

Lev: It also means that future experiments trying to detect these particles, like DARWIN or even indirect searches looking for W plus W minus annihilation, will have to account for these potentially larger coupling strengths.

Kai: This work sets up a framework where the dynamics of the early universe, specifically its cooling rate or TRH, directly dictates what we need in terms of model couplings to get a viable dark matter density.

Mira: It really shows how subtle shifts in cosmology, like low reheating temperatures, can drastically change the parameter space for dark matter model building.

Lev: We've shown that this framework is viable within current experimental constraints, but it definitely points toward new regions of coupling space that future experiments need to explore.

School of Physical Sciences, Indian Association for the Cultivation of Science · Department of Physics, Indian Institute of Technology Kharagpur · State Key Laboratory of Dark Matter Physics, Tsung-Dao Lee Institute & School of Physics and Astronomy, Shanghai Jiao Tong University · Key Laboratory for Particle Astrophysics and Cosmology (MOE) & Shanghai Key Laboratory for Particle Physics and Cosmology

hep-ph

Submitted: 2026-05-23

Updated: 2026-11-05

Comments: 22 pages, 7 figures; published in PRD

DOI: 10.1103/3n3s-8t46

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 85/100

The gist: The freeze-in mechanism for dark matter (DM) requires extremely feeble interactions with the Standard Model (SM)…

Key concepts

Freeze-in Mechanism
This process describes how dark matter is produced not from thermal equilibrium but through rare interactions with Standard Model particles in the early universe. It's a way to generate dark matter when its interactions are too weak for traditional thermal production methods.
SU(2)HS Gauge Symmetry
This is a new, non-Abelian gauge symmetry added to the Standard Model. SM particles are treated as singlets under this group. Spontaneous breaking of this symmetry generates the mass for the dark matter candidate X.
Low Reheating Temperature Effects
When the reheating temperature (TRH) is very low, DM production experiences an exponential suppression because its interaction rate becomes much slower than the expansion of the universe. To overcome this suppression and match observed DM density, stronger couplings are necessary.

Terminology

Summary

The freeze-in mechanism for dark matter (DM) requires extremely feeble interactions with the Standard Model (SM), preventing thermal equilibrium in the early Universe and typically evading experimental detection. p. 0

Where the paper says it

cn Abstract. The freeze-in mechanism for dark matter (DM) requires extremely feeble interactions with the Standard Model (SM), preventing thermal equilibrium in the early Universe and typically evading experimental detection.

In this work, we investigate freeze-in production of SU(2)HS vector dark matter (VDM) in a low-TRH cosmology. p. 0
Where the paper says it

However, for sufficiently low reheating temperatures (TRH), the observed relic abundance can be realized with larger couplings, opening prospects for experimental searches. In this work, we investigate freeze-in production of SU(2)HS vector dark matter (VDM) in a low-TRH cosmology.

Model Description

The paper considers an extension of the Standard Model (SM) by a non-Abelian gauge symmetry SU(2)HS, where SM particles are singlets under this new gauge group. The model includes a BSM scalar doublet ϕ whose vacuum expectation value (VEV) spontaneously breaks the SU(2)HS, generating the mass of the DM candidate X. p. 2

Where the paper says it

Note that all the SM particles are singlets under this new gauge group. The scalar sector of this BSM model includes a BSM scalar doublet ϕ whose vacuum expectation value (VEV) spontaneously breaks the SU(2)HS, generating the mass of the DM candidate X.

A striking feature is that the three DM candidates Xi become stable due to an accidental custodial SO(3) symmetry emerged from the SU(2)HS breaking without needing additional discrete symmetry. p. 2
Where the paper says it

The scalar sector of this BSM model includes a BSM scalar doublet ϕ whose vacuum expectation value (VEV) spontaneously breaks the SU(2)HS, generating the mass of the DM candidate X. The striking feature of such a model is that the 3 DM candidates Xi become stable due to the custodial SO(3) symmetry emerged from the SU(2)HS breaking without any imposition of additional discrete symmetry that is commonly found in other DM models.

This stability arises dynamically from the residual custodial symmetry and does not require an additional ad hoc Z2 symmetry, unlike many Abelian vector dark matter constructions. p. 3
Where the paper says it

Thus, the three components X 1,2,3 µ collectively constitute a triply degenerate vector dark matter sector, with identical masses and portal interactions. This stability arises dynamically from the residual custodial symmetry and does not require the imposition of an additional ad hoc Z2 symmetry, unlike many Abelian vector dark matter constructions.

DM Production Mechanism

The DM X gets produced from the BSM interactions of SM particles as well as the BSM scalar η. The evolution of X density is obtained by solving the Boltzmann equation as a function of temperature T. p. 5

Where the paper says it

The DM X gets produced from the BSM interactions of SM particles as well as the BSM scalar η. The evolution of X density can be obtained by solving the Boltzmann equation as a function of temperature T, dYX dT = − Sent HT X i=f,h,η,V (Y eq i ) 2 ⟨σv⟩ii→XX − (YX) 2 ⟨σv⟩XX→ii − 1 HT X j=h,η h (Y eq j ⟨Γ⟩j→XX − YX⟨Γ⟩XX→j ) i , (3.

The initial condition is set by setting YX = 0 at T = TRH. p. 5
Where the paper says it

Moreover, Sent stands for the comoving entropy density, whereas H = p 8πρrad/3/Mpl is the Hubble expansion rate with Mpl and ρrad being the Planck mass and the total energy density, respectively. The initial condition is imposed by setting YX = 0 at T = TRH.

The production cross sections for pair annihilation of SM fermions and gauge bosons are given by equation (3. p. 5
Where the paper says it

The thermal averages of the respective annihilation cross section (σ) and decay width (Γ) are denoted by ⟨σv⟩ and ⟨Γ⟩, respectively. The production cross sections for pair annihilation of SM fermions and gauge bosons are given as, σff¯→XX = 1 Nc m2 f sin2 2β 256πsv2v 2 ϕ 1 s − m2 h + imhΓh − 1 s − m2 η + imηΓη 2 (s 2 − 4m2 Xs + 12m4 X) q (s − 4m2 f )(s − 4m2 X) (3.

2).

Low Reheating Temperature Effects

The production rate suffers from a Boltzmann suppression when the DM mass is larger than the reheating temperature (TRH). Specifically, in the limit T << mX, the interaction rate and consequently YDM become exponentially suppressed as TRH decreases. p. 6

Where the paper says it

In this limit, the Bessel function also behaves as K1 ( √ s/T) ∝ p T /s1/2e − √ s/T . Thus, with an increase in the ratio mX/TRH, the interaction rate and consequently YDM become exponentially suppressed as observed in Fig.

To satisfy the observed DM density under these conditions, one needs to assume stronger DM–1 couplings compared to vanilla freeze-in DM. p. 1
Where the paper says it

In such a scenario, when the reheating temperature is smaller than the DM mass (m), only a sub-fraction of the particles annihilating to DM can potentially generate DM that lies in the tail of the Boltzmann distribution function with energy ≫ TRH and the overall DM production rate becomes suppressed by exp (−m/T) [17]. Consequently, to satisfy the observed DM density, one needs to assume stronger DM – 1 –

This crucial feature serves as the primary focus of this work. p. 7
Where the paper says it

words, it can be stated that to satisfy the same DM abundance, the associated DM couplings should be higher for a lower value of TRH. This crucial feature serves as the primary focus of this work.

Phenomenological Constraints and Results

Exhaustive numerical scans over various model parameters reveal that with higher gauge coupling (gϕ) and the mixing angle (sin β), the DM abundances increase as these parameters directly control the production cross-section. The paper finds that for mDM ∼ 100 GeV and TRH = 5 GeV one requires gϕ = O(10−1) to satisfy the observed relic density while fixing mη = 60 GeV and sin β = 0. p. 9

Where the paper says it

1 TRH=120 GeV TRH=90 GeV TRH=60 GeV TRH=30 GeV gφ 10 −6 10 −5 10 −4 10 −3 10 −2 10 −1 10 0 10 1 MDM (GeV) 500 1000 2000 (b) Figure 4. Contours satisfying the observed relic density are shown in the gϕ–MDM plane.

1. The DM masses with the ratio MDM /TRH ∼ 15 − 20 are excluded from existing direct searches. p. 0
Where the paper says it

We perform a systematic study of the dark matter phenomenology and identify the parameter space consistent with the observed relic abundance. In contrast to conventional freeze-in scenarios, the required DM couplings can be sizable, rendering part of the parameter space already constrained by existing direct searches like PandaX-4T and LZ, while a significant region remains within the reach of future experiments such as DARWIN.

Experimental Constraints and Future Prospects

The study incorporates theoretical constraints such as perturbative unitarity and collider bounds, including constraints on the invisible decay width of the SM Higgs boson. Direct detection experiments like LZ [33] and PandaX-4T [34] impose stringent constraints on the spin-independent (SI) scattering cross section. p. 9

Where the paper says it

The DM candidate X interacts with nucleons via scalar mediation through the Higgs boson h and the scalar η. The resulting spin-independent (SI) scattering cross section is given by σSI = 1 64π f 2m2 N v 2 ϕ v 2 g 4 ϕ sin2 (2β) (m2 η − m2 h ) 2 m4 ηm4 h µ 2 r m2 X , (4.

Despite these stringent constraints, a viable parameter space remains that can be tested in future experiments like DARWIN. p. 0
Where the paper says it

In contrast to conventional freeze-in scenarios, the required DM couplings can be sizable, rendering part of the parameter space already constrained by existing direct searches like PandaX-4T and LZ, while a significant region remains within the reach of future experiments such as DARWIN. Though one can realize the freeze-in mechanism for an abelian U(1)X vector DM models as well, we find that the non-abelian structure of the SU(2)HS scenario leads to a distinct feature due to a larger number of dark matter particles, resulting in an enlarged viable parameter arXiv:2605.

The most stringent indirect detection bounds apply on the DM annihilation channel to W+W−. p. 4
Where the paper says it

The channels are (a) fermion annihilation via scalar mediator, (b) gauge boson annihilation via scalar mediator, (c) scalar annihilation via scalar mediator, (d) scalar annihilation w/o mediator, (e) scalar annihilation via VDM mediator. For the last one, there also exists a u-channel diagram, which is not shown explicitly.

Conclusion

In this work, we consider a minimal beyond-the-Standard-Model (BSM) scenario where the SM particle spectrum is augmented by a hidden non-Abelian gauge symmetry SU(2)HS, giving rise to three spin-1 gauge bosons Xi(i = 1, 2, 3). The spontaneous breaking of SU(2)HS via the vacuum expectation value of ϕ generates a common mass for the three vector bosons, while the resulting SO(3) custodial symmetry ensures their stability. p. 2

Where the paper says it

The scalar sector of this BSM model includes a BSM scalar doublet ϕ whose vacuum expectation value (VEV) spontaneously breaks the SU(2)HS, generating the mass of the DM candidate X. The striking feature of such a model is that the 3 DM candidates Xi become stable due to the custodial SO(3) symmetry emerged from the SU(2)HS breaking without any imposition of additional discrete symmetry that is commonly found in other DM models.

This framework allows for a freeze-in DM with comparatively stronger coupling that can be testable in current and future generation DM search experiments. The freeze in VDM at low reheating temperatures in such SU(2)HS setup may lead to significant insights into the experimental and phenomenological possibilities of DM model building. p. 0
Where the paper says it

However, for sufficiently low reheating temperatures (TRH), the observed relic abundance can be realized with larger couplings, opening prospects for experimental searches. In this work, we investigate freeze-in production of SU(2)HS vector dark matter (VDM) in a low-TRH cosmology.

A Parametrization

Here we present the parametrization of the quartic couplings in terms of the masses of the physical scalars. If mη > mh, then m2h,η = λHυ2 + λϕυ2ϕ∓ (λϕυ2ϕ − λHυ2)/cos 2β. p. 4

Where the paper says it

Conversely, for mh > mη, corresponding masses are obtained by interchanging the ± signs in the same equation. h, η is related to the unphysical basis by, h η = cos β − sin β sin β cos β S ϕ0 , with, tan 2β = λϕHvvϕ λϕv 2 ϕ − λHv 2 (2.

The quartic couplings can be expressed as λH = m2h 2υ squared cos squared β + m2η 2υ squared sin squared β, λϕ = m2h 2υ squared ϕ sin squared β + m2η 2υ 4 ϕ cos 3β. p. 4
Where the paper says it

9) Thus, the main interaction channel of X is through the Higgs portal (h, η) with SM fermions and the SM gauge bosons governed by sin 2β × (gϕvϕ), which is important from both production and detection aspects. Also there can be quartic vertex with h, η governed by sin β(cos β) × gϕ and scalar portal interactions of hh(ηη) → XX governed by same sin β and (gϕvϕ).

If mη < mh, then m2h,η = λHυ2 + λϕυ2ϕ± (λϕυ2ϕ − λHυ2)/cos 2β. p. 4
Where the paper says it

Conversely, for mh > mη, corresponding masses are obtained by interchanging the ± signs in the same equation. h, η is related to the unphysical basis by, h η = cos β − sin β sin β cos β S ϕ0 , with, tan 2β = λϕHvvϕ λϕv 2 ϕ − λHv 2 (2.

Cross-sections for hihj → XX

The amplitude for the process hihj → XX receives contributions from contact interaction, s-channel scalar exchange and, when allowed by the cubic hiXX vertices, t- and u-channel vector exchange. The required vector X–scalar couplings are ghXX = −g 2ϕvϕ/4 sin β, gηXX = g 2ϕvϕ/4 cos β. p. 0

Where the paper says it

In contrast to conventional freeze-in scenarios, the required DM couplings can be sizable, rendering part of the parameter space already constrained by existing direct searches like PandaX-4T and LZ, while a significant region remains within the reach of future experiments such as DARWIN. Though one can realize the freeze-in mechanism for an abelian U(1)X vector DM models as well, we find that the non-abelian structure of the SU(2)HS scenario leads to a distinct feature due to a larger number of dark matter particles, resulting in an enlarged viable parameter arXiv:2605.

Interaction Lagrangian of scalar sector

In the mass eigenstate basis, the interaction terms in the Lagrangian is L ⊃ −1/6ρhh3 − 1/6ρηη3 − 1/2ρ1η2h − 1/2ρ2h2η. The scalar trilinear couplings are given by ρ1 = −6λϕvϕ cos squared β sin β + 6λHv sin squared β cos β + λϕH v cos cubed β − vϕ sin cubed β − 2v cos β sin squared β + 2vϕ cos squared β sin β. p. 4

Where the paper says it

9) Thus, the main interaction channel of X is through the Higgs portal (h, η) with SM fermions and the SM gauge bosons governed by sin 2β × (gϕvϕ), which is important from both production and detection aspects. Also there can be quartic vertex with h, η governed by sin β(cos β) × gϕ and scalar portal interactions of hh(ηη) → XX governed by same sin β and (gϕvϕ).

DARWIN

The paper shows that for a fixed DM mass, a larger gauge coupling gϕ is required to reproduce the correct relic density as the reheating temperature TRH decreases. This behaviour follows from the exponential suppression of the DM production rate at lower TRH. p. 1

Where the paper says it

Hence, in principle, one can assume TRH as low as O(10) MeV. In such a scenario, when the reheating temperature is smaller than the DM mass (m), only a sub-fraction of the particles annihilating to DM can potentially generate DM that lies in the tail of the Boltzmann distribution function with energy ≫ TRH and the overall DM production rate becomes suppressed by exp (−m/T) [17].

With an increase in coupling gϕ, the relevant collision terms increase as ∼ g 2ϕ, leading to an enhanced density of DM. p. 6
Where the paper says it

2(b) we showcase the variation YDM with different values of gϕ for a fixed TRH = 100 GeV, the cyan, red, and blue lines correspond to gϕ = 5 × 10−8 , 5 × 10−7 and 5 × 10−6 . Needless to say, with an increase in the coupling gϕ, the relevant collision terms increase as ∼ g 2 ϕ , leading to an enhanced density of DM.

Results

The results show that for a fixed DM mass, a larger gauge coupling gϕ is required to reproduce the correct relic density as the reheating temperature TRH decreases. We find that with higher gauge coupling (gϕ) and the mixing angle (sin β), the DM abundances increase as these parameters directly control the production cross-section. p. 9

Where the paper says it

8) These conditions impose constraints on gϕ and sin β for a benchmark mX and mη. Apart from the invisible decay, Higgs signal strength measurements impose a weaker constraint on mixing angle, which restricts sin β < 0.

More importantly, we notice that with an increase by a few factors in the ratio mDM/TRH, the DM abundances decrease by a few orders of magnitude due to the previously mentioned Boltzmann suppression. p. 7
Where the paper says it

Indeed the scalar-annihilation channels, such as ηη → XiXi and hη → XiXi , increasing mη can increase the typical √ s and hence leads to a Boltzmann suppression through K1( √ s/T). However, the growth of YDM with mη is not a purely kinematic phase-space effect, but rather a benchmark-dependent result due to the interplay among scalar amplitudes and thermal suppression factors.

To compensate for this suppression, the correct relic density is obtained with a comparatively larger coupling than that used in the usual freeze-in scenario. p. 2
Where the paper says it

As mentioned earlier, we are interested in the paradigm where DM mass is larger than TRH, which leads to a Boltzmann-suppressed freeze-in production rate. As a result, such a scenario requires a comparatively larger coupling, allowing us to explore a new parameter regime with rich phenomenological insights.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced parameter space exploration for freeze-in dark matter systems by systematically mapping DM mass versus gauge coupling against reheating temperature and mediator masses using numerical solutions to the Boltzmann equation (eq 3.1).

  2. Improved constraint evaluation for direct detection experiments by providing specific limits on the spin independent scattering cross section sigma SI based on the SU(2)HS model and comparing it against existing bounds from LZ and PandaX-4T experiments.

  3. Refined indirect detection capability by calculating thermal average annihilation cross sections specifically for the XiXi to W+W- channel as a function of DM mass and reheating temperature, allowing for more precise comparison with Fermi-LAT and AMS constraints.

  4. Development of a predictive model for required DM couplings in low reheating temperature regimes, identifying how the need to overcome Boltzmann suppression (exp (-mDM/TRH)) dictates larger coupling strengths.

  5. Automated constraint checking against theoretical consistency conditions, such as perturbativity and vacuum stability bounds derived from scalar potential parameters like lambda H and lambda phi.

Abstract

The freeze-in mechanism for dark matter (DM) requires extremely feeble interactions with the Standard Model (SM), preventing thermal equilibrium in the early Universe and typically evading experimental detection. However, for sufficiently low reheating temperatures (T RH), the observed relic abundance can be realized with larger couplings, opening prospects for experimental searches. In this work, we investigate freeze-in production of SU(2) HS vector dark matter (VDM) in a low- T RH cosmology. The framework naturally contains three mass-degenerate stable VDM candidates without the need for any additional discrete symmetry. We perform a systematic study of the dark matter phenomenology and identify the parameter space consistent with the observed relic abundance. We work with the approximation of instantaneous reheating and consider the DM abundance to be negligible at T RH. In contrast to conventional freeze-in scenarios, the required DM couplings can be sizable, rendering part of the parameter space already constrained by existing direct searches like PandaX-4T and LZ, while a significant region remains within the reach of future experiments such as DARWIN. Though one can realize the freeze-in mechanism for an abelian U(1) X vector DM models as well, we find that the non-abelian structure of the SU(2) HS scenario leads to a distinct feature due to a larger number of dark matter particles, resulting in an enlarged viable parameter space due to the multiplicity of dark matter states.

Sources

Related papers