Shapiro steps of superfluid Fermi gases in a ring trap across the BCS--BEC crossover

arXiv:2605.17940 · cond-mat.quant-gas, cond-mat.supr-con · Submitted 2026-05-18 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "Shapiro steps of superfluid Fermi gases in a ring trap across the BCS--BEC crossover".

Mira: Here's the gist of the paper. Shapiro steps of superfluid Fermi gases in a ring trap across the BCS–BEC crossover investigate transport properties using time-dependent Bogoliubov–de Gennes (BdG) equations and reveal low-order plateau structures consistent with Shapiro steps, which originate from synchronized phase slips mediated by periodic soliton generation at the barrier Modeling the System Dynamics The study employs a model of a superfluid Fermi gas in a ring trap with a moving Gaussian potential barrier that incorporates both DC and AC components to simulate a Josephson junction biased by combined currents The dynamics are computed by solving the time-dependent BdG (tdBdG) equations starting from a self-consistent stationary state obtained from the BdG equations, the gap equation and the particle number equation The barrier position is defined by xedge(t) = mod

Lx/2 + xb(t), Lx: , where Lx is the system size along the ring direction x The chemical potential difference between the two reservoirs is quantified as ∆µ(t) = NEC 2 z(t), where z(t) = NR(t) − NL(t)/N Microscopic Origin of Shapiro Steps The fundamental steps in the chemical potential difference exhibit low-order plateau structures whose fitted levels lie close to integer multiples of ħω/2 within the phase-coherent regime These steps are microscopically identified as originating from synchronized phase slips mediated by periodic soliton generation near the barrier The analysis confirms that this microscopic mechanism is consistent with previous studies on atomic Josephson junctions

52, 53: and bosonic theoretical study

47: Interaction Dependence Across the Crossover The results are explored across a wide range of interaction strengths by tuning the dimensionless parameter (kFa)−1, covering the BCS–BEC crossover The analysis shows that while plateau levels are relatively insensitive to the interaction strength, their onset positions and widths vary across the crossover, reflecting the interaction dependence of junction properties Specifically, the critical driving velocity vc exhibits a nonmonotonic dependence on interaction strength, peaking in the UFG regime and decreasing toward both limits Transport Regime Characterization The transport behavior is characterized by fitting the numerical data of vDC − ∆µ characteristics with an overdamped solution to extract the junction-dependent critical driving velocity vc and the conductance G The Stewart-McCumber parameter βc remains well above unity across the entire crossover, suggesting that the junction operates deep in the underdamped regime throughout The critical velocity vc is not identified with the Landau critical velocity vbulk L of a homogeneous superfluid AC Driving Effects and Synchronization When both DC and AC driving are present, the numerical curves exhibit low-order plateau-like structures near integer multiples of ħω/2, although these plateaus are broadened The plateau levels are approximately independent of the AC modulation amplitude xAC, and their proportionality to ħω supports the relation ∆µ = nħω/2 Furthermore, the winding-number increment per drive cycle νW exhibits step-like behavior correlated with the low-order Shapiro-step regions This indicates that the global phase-slip events are synchronized with the external modulation The fundamental mechanism of the Shapiro steps in a ring-trapped superfluid is understood as a macroscopic phase-locking process governed by transitions of topological winding numbers The synchronized dynamics are mediated by the periodic generation of solitons at the barrier Future research should extend numerical analysis to two- or three-dimensional ring geometries to examine the snake instability and explore dynamics beyond the mean-field BdG framework in the strongly interacting BEC regime The study provides microscopic insights relevant to future studies of atomtronic systems with nontrivial topology Appendix Details The self-consistent calculation loop for solving the BdG equations and related equations uses a modified Broyden’s method The effective charging energy EC is calculated by evaluating the thermodynamic derivative, which requires dynamically scaling system parameters to maintain a constant physical volume and scattering length The split-step Fourier method is used to solve the tdBdG equations efficiently by switching between real and momentum spaces The calculation of the initial stationary states involves solving the BdG equations self-consistently using this modified Broyden’s method Appendix B Details The calculation of the effective charging energy EC is defined as EC = 4 ∂µ / ∂N V,a To properly evaluate this thermodynamic derivative, it is crucial to keep the physical volume V and the s-wave scattering length a strictly constant The correct derivative at the target particle number N0 is analytically derived as 1/EF0 ∂µ / ∂N = ∂µ˜(N) / ∂N + 2/3 N0 µ˜(N0), where the second term precisely corrects for the apparent variation caused by the continuous rescaling of the energy unit EF(N) Appendix C Details The split-step Fourier method is used to solve the tdBdG equations and time-dependent gap equation The time evolution from t to t + ∆t is obtained by applying the time-ordered exponential splitting method to Eq.

Kai: (C5) The calculation of the order parameter ∆(x, t) self-consistently at each time step using Eq.

Paper summary: Kai: So, to recap this paper on "Shapiro steps of superfluid Fermi gases in a ring trap across the BCS--BEC crossover," the main idea is to study transport in a superfluid Fermi gas inside a ring trap when you introduce a moving potential barrier that has both DC and AC components >

Mira: They are investigating how the chemical potential difference changes as you vary this barrier velocity, and they claim they find low-order plateau structures that match the Shapiro steps we see in other systems >

Lev: The significance for us is that these steps aren't just noise; they stem from synchronized phase slips caused by periodic soliton generation right at the barrier >

Kai: The paper sets up this simulation using time-dependent Bogoliubov–de Gennes equations starting from a stationary state, and they show these plateau levels are close to integer multiples of h omega over two within the phase-coherent regime >

Mira: It matters because they explored this across the entire BCS to BEC crossover, showing that while the step levels are stable, their onset positions vary depending on how strongly the atoms interact >

Lev: The core claim is that this microscopic mechanism—the soliton generation—is what underpins these steps, which connects it back to previous studies in atomic Josephson junctions and bosonic systems >

Kai: They also found that when you add AC driving on top of the DC driving, you get these plateau-like structures again, though they are a bit broadened >

Mira: And those plateau levels stay about the same regardless of how big the AC modulation amplitude is, which links back to the idea that they are proportional to h omega over two >

Lev: Essentially, this work provides a microscopic theoretical study of these steps in a ring trap geometry with nontrivial topology, which is what they need for understanding nonequilibrium dynamics >

Conclusion: Kai: So, looking at this whole study on "Shapiro steps of superfluid Fermi gases in a ring trap across the BCS--BEC crossover," we see that the authors connected macroscopic transport features to microscopic soliton dynamics >

Mira: They showed that these steps are fundamentally about a macroscopic phase-locking process driven by transitions in the topological winding number, which is what governs their synchronized dynamics >

Lev: What this means for us is that understanding how these topological numbers increment under external modulation gives us a way to control the dynamics of these complex quantum systems >

Kai: It gives us a clear picture of how the interaction strength across the BCS to BEC crossover affects the junction properties, showing where you have to look for specific behavior >

Mira: So, in simple terms, this paper tells us that those steps aren't just random fluctuations; they are predictable consequences of how solitons move and get synchronized at a barrier >

Lev: For anyone building hardware based on these concepts, the implication is that the AC driving doesn't just add noise; it locks the system into specific states dictated by this soliton physics >

Hikaru Kuriki, Masaya Kunimi, Tetsuro Nikuni

Department of Physics, Tokyo University of Science

cond-mat.quant-gas, cond-mat.supr-con

Submitted: 2026-05-18

Updated: 2026-11-04

Comments: 16 pages, 12 figures

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 85/100

The gist: Shapiro steps of superfluid Fermi gases in a ring trap across the BCS–BEC crossover investigate transport properties using time-dependent Bogoliubov–de Gennes (BdG) equations and reveal low-order…

Key concepts

Shapiro Steps
These are characteristic plateaus in a system's chemical potential difference that occur at specific values related to external driving frequencies. In this study, they were found to be caused by synchronized phase slips happening near a barrier, which is essentially a macroscopic locking process.
BCS–BEC Crossover
This describes the transition of interacting fermions from a state where they behave like weakly bound Cooper pairs (BCS regime) to a state where they form tightly bound molecules (BEC regime). The study explored how the transport features change as the interaction strength is tuned across this entire range.
Solitons
Solitons are localized, stable wave packets in a system that maintain their shape while traveling. In this context, periodic soliton generation near a barrier acts as the physical mechanism that mediates and synchronizes the phase slips responsible for creating the Shapiro steps.
BdG Equations
The time-dependent Bogoliubov–de Gennes (tdBdG) equations are the fundamental mathematical tools used to describe how a superfluid's quantum state evolves over time. They allow researchers to simulate the dynamics of the Fermi gas, including how it responds to external forces and barriers.

Terminology

Summary

Shapiro steps of superfluid Fermi gases in a ring trap across the BCS–BEC crossover investigate transport properties using time-dependent Bogoliubov–de Gennes (BdG) equations and reveal low-order plateau structures consistent with Shapiro steps, which originate from synchronized phase slips mediated by periodic soliton generation at the barrier

Modeling the System Dynamics

The study employs a model of a superfluid Fermi gas in a ring trap with a moving Gaussian potential barrier that incorporates both DC and AC components to simulate a Josephson junction biased by combined currents The dynamics are computed by solving the time-dependent BdG (tdBdG) equations starting from a self-consistent stationary state obtained from the BdG equations, the gap equation and the particle number equation The barrier position is defined by xedge(t) = mod [Lx/2 + xb(t), Lx], where Lx is the system size along the ring direction x The chemical potential difference between the two reservoirs is quantified as ∆µ(t) = NEC 2 z(t), where z(t) = NR(t) − NL(t)/N

Microscopic Origin of Shapiro Steps

The fundamental steps in the chemical potential difference exhibit low-order plateau structures whose fitted levels lie close to integer multiples of ħω/2 within the phase-coherent regime These steps are microscopically identified as originating from synchronized phase slips mediated by periodic soliton generation near the barrier The analysis confirms that this microscopic mechanism is consistent with previous studies on atomic Josephson junctions [52, 53] and bosonic theoretical study [47]

Interaction Dependence Across the Crossover

The results are explored across a wide range of interaction strengths by tuning the dimensionless parameter (kFa)−1, covering the BCS–BEC crossover The analysis shows that while plateau levels are relatively insensitive to the interaction strength, their onset positions and widths vary across the crossover, reflecting the interaction dependence of junction properties Specifically, the critical driving velocity vc exhibits a nonmonotonic dependence on interaction strength, peaking in the UFG regime and decreasing toward both limits

Transport Regime Characterization

The transport behavior is characterized by fitting the numerical data of vDC − ∆µ characteristics with an overdamped solution to extract the junction-dependent critical driving velocity vc and the conductance G The Stewart-McCumber parameter βc remains well above unity across the entire crossover, suggesting that the junction operates deep in the underdamped regime throughout The critical velocity vc is not identified with the Landau critical velocity vbulk L of a homogeneous superfluid

AC Driving Effects and Synchronization

When both DC and AC driving are present, the numerical curves exhibit low-order plateau-like structures near integer multiples of ħω/2, although these plateaus are broadened The plateau levels are approximately independent of the AC modulation amplitude xAC, and their proportionality to ħω supports the relation ∆µ = nħω/2 Furthermore, the winding-number increment per drive cycle νW exhibits step-like behavior correlated with the low-order Shapiro-step regions This indicates that the global phase-slip events are synchronized with the external modulation

Conclusion and Future Directions

The fundamental mechanism of the Shapiro steps in a ring-trapped superfluid is understood as a macroscopic phase-locking process governed by transitions of topological winding numbers The synchronized dynamics are mediated by the periodic generation of solitons at the barrier Future research should extend numerical analysis to two- or three-dimensional ring geometries to examine the snake instability and explore dynamics beyond the mean-field BdG framework in the strongly interacting BEC regime The study provides microscopic insights relevant to future studies of atomtronic systems with nontrivial topology

Appendix Details

The self-consistent calculation loop for solving the BdG equations and related equations uses a modified Broyden’s method The effective charging energy EC is calculated by evaluating the thermodynamic derivative, which requires dynamically scaling system parameters to maintain a constant physical volume and scattering length The split-step Fourier method is used to solve the tdBdG equations efficiently by switching between real and momentum spaces The calculation of the initial stationary states involves solving the BdG equations self-consistently using this modified Broyden’s method

Appendix B Details

The calculation of the effective charging energy EC is defined as EC = 4 ∂µ / ∂N V,a To properly evaluate this thermodynamic derivative, it is crucial to keep the physical volume V and the s-wave scattering length a strictly constant The correct derivative at the target particle number N0 is analytically derived as 1/EF0 ∂µ / ∂N = ∂µ˜(N) / ∂N + 2/3 N0 µ˜(N0), where the second term precisely corrects for the apparent variation caused by the continuous rescaling of the energy unit EF(N)

Appendix C Details

The split-step Fourier method is used to solve the tdBdG equations and time-dependent gap equation The time evolution from t to t + ∆t is obtained by applying the time-ordered exponential splitting method to Eq. (C5) The calculation of the order parameter ∆(x, t) self-consistently at each time step using Eq. p. 3

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Precise modeling of nonequilibrium phase dynamics can be achieved by employing time-dependent Bogoliubov–de Gennes equations (tdBdG) to simulate Josephson junctions biased by both DC and AC currents. This allows the system to capture complex transport behavior across the BCS to BEC crossover, where the complex interplay between the AC driving and the internal degrees of freedom—such as pairbreaking excitations in the BCS regime—cannot be fully captured by simple phenomenological models.

  2. Calculation of chemical potential difference can be performed using a specific extraction protocol: we fit the time evolution of ∆µ(t) with a linear function, ∆µfit(t) = afitt, and evaluate this fitted function at the final simulation time tf. This method emulates experimental measurement procedures to extract the finite-time effective DC chemicalpotential difference.

  3. Microscopic origin identification can be made by linking macroscopic observations to microscopic events: these fundamental steps originate from synchronized phase slips mediated by periodic soliton generation at the barrier. This connects the observed Shapiro steps directly to topological winding number transitions, which are quantified by W(t).

  4. Understanding interaction regime dependence in transport can be enhanced by analyzing derived junction parameters: The conductance G exhibits a minimum around (kFa) − 0.5 and increases toward both the BCS and BEC limits, providing a quantitative measure of how dissipative processes are suppressed near unitarity, consistent with the enhanced robustness of superfluid transport near unitarity.

  5. Detection of synchronization can be quantified using a cycle-averaged winding number increment: we define the net winding-number increment per drive cycle as νW ≡ W(5T /2) − W(T /2) / 2, which exhibits step-like behavior correlated with the low-order Shapiro-step regions, confirming that the global phase-slip events are synchronized with the external modulation.

Sources

Related papers