Theory of Melting Lines with Variable Enthalpy of Fusion: Independent Verification of Phonon Theory of Liquids - Predicted Parabolic Behavior

arXiv:2605.17631 · cond-mat.stat-mech · Submitted 2026-05-17 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Theory of melting lines with a variable enthalpy of fusion".

Mira: Here's the gist of the paper. The paper develops a two-phase analytical model by modifying the Clausius-Clapeyron equation to account for a variable enthalpy of fusion along the melting line, which is important because it provides an analytically solvable model for low-pressure melting curves based on anharmonic effects in solid heat capacity Theoretical Foundation of the Model The authors modify the CC equation to account for a variable enthalpy of fusion along the melting line, addressing the limitations of constant latent heat approximations.

Kai: They base their derivation on recent theoretical and experimental progress demonstrating that the ratio of isobaric heat capacity to thermal volume expansion coefficient in solid state correlates to the fusion enthalpy and specific volumes during melting processes The derivation is rooted in solid-state anharmonicity, yielding approximate parabolic scaling laws that corroborate a universal model from Phonon Theory of Liquids.

Mira: Derivation of the Governing Differential Equation The first-order phase transitions are governed by the CC equation, and differentiating it with respect to pressure yields a second-order differential equation dictating the melting curve in the low-pressure regime.

Kai: By substituting Eq.

Paper summary: Kai: So, looking at the paper "Theory of melting lines with a variable enthalpy of fusion," the authors basically say they successfully bypassed the historical assumption about a constant latent heat by incorporating how anharmonic and volume-dependent solid heat capacity is >

Mira: They show that this new framework relies only on fundamental, measurable quantities like bulk moduli and specific volumes to define its parameters, which is pretty powerful because it removes the need for empirical fitting >

Lev: For us building error correction hardware, the fact that they get a universal parabolic description of the melting curves across the phase diagram means we have a strong theoretical anchor to test our material models against >

Kai: The paper’s main claim is that their predictions regarding both the parabolic nature of these melting curves and their initial slopes falling around beta L B L match up well with Trachenko’s theory based on Phonon Theory of Liquids >

Mira: It suggests that the universal, parabolic nature of low-pressure melting curves isn't just a fluke; it seems to be governed by these fundamental thermophysical quantities that are measurable in the lab >

Lev: If this holds up when we move to real hardware, it simplifies our modeling because we don't have to deal with arbitrary latent heat values anymore >

Conclusion: Kai: So, we're wrapping up this look at "Theory of melting lines with a variable enthalpy of fusion." Basically, they took something old—the constant latent heat idea—and replaced it with something new based on how the solid material actually behaves when you change pressure.

Mira: Right. The authors are looking at how the heat capacity changes when you melt things along that melting line, and they found that this variable enthalpy thing makes the whole thing analytically solvable, which is a big deal for getting a clean equation.

Lev: From my side, if the model is truly analytical and not just some curve fitting, then it means we can build better error correction codes because we have a more fundamental way to predict how these materials will behave under stress.

Kai: It’s interesting because they didn't just invent a new formula out of thin air; they linked it back to solid-state anharmonicity and phonon theory, which is the physics of how atoms really vibrate in a crystal.

Mira: Exactly. The real strength here is that the parameters they use are all these measurable things—like specific volumes and heat capacities—so they aren't relying on some arbitrary constants you just plug in for a simulation.

Lev: If it relies only on those fundamental quantities, then running this model on real hardware becomes much more feasible because we have concrete, testable inputs instead of guesswork.

Kai: So what does this mean for us? It suggests that the universal parabolic shape of melting curves might be a consequence of these underlying vibrational rules rather than some complicated material-specific quirks.

Mira: It implies that if we can accurately measure those fundamental solid properties, we might predict the melting behavior of new materials with much more confidence than before.

National and Kapodistrian University of Athens

cond-mat.stat-mech

Submitted: 2026-05-17

Updated: 2026-11-17

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: The paper develops a two-phase analytical model by modifying the Clausius-Clapeyron equation to account for a variable enthalpy of fusion along the melting line…

Key concepts

Clausius-Clapeyron Equation Modification
The authors adapted the standard Clausius-Clapeyron equation by introducing a variable enthalpy of fusion ($\delta H$) instead of assuming it is constant. This modification addresses limitations in previous models that used fixed latent heat values, allowing the model to better reflect real physical changes during melting.
Anharmonic Effects in Solid Heat Capacity
The derivation is based on the idea that the solid's heat capacity isn't simple; it has a vibrational component and a volume component. These anharmonic effects are crucial because they link the ratio of isobaric heat capacity to thermal volume expansion to the fusion enthalpy and specific volumes during melting.
Parabolic Melting Curve
The resulting mathematical solution describes the melting line (ML) as an approximate parabola across the entire P-T phase diagram. This universal parabolic nature is determined by fundamental thermophysical quantities, such as bulk moduli and thermal expansion coefficients, rather than empirical fitting.

Terminology

Summary

The paper develops a two-phase analytical model by modifying the Clausius-Clapeyron equation to account for a variable enthalpy of fusion along the melting line, which is important because it provides an analytically solvable model for low-pressure melting curves based on anharmonic effects in solid heat capacity

Theoretical Foundation of the Model

The authors modify the CC equation to account for a variable enthalpy of fusion along the melting line, addressing the limitations of constant latent heat approximations. They base their derivation on recent theoretical and experimental progress demonstrating that the ratio of isobaric heat capacity to thermal volume expansion coefficient in solid state correlates to the fusion enthalpy and specific volumes during melting processes The derivation is rooted in solid-state anharmonicity, yielding approximate parabolic scaling laws that corroborate a universal model from Phonon Theory of Liquids. p. 0

Where the paper says it

The parameters of these analytic functions are defined exclusively by fundamental thermophysical properties, including the bulk moduli, thermal expansion coefficients, and specific volumes of the coexisting phases, as well as the isobaric heat capacity of the solid state. Our derivation, rooted in solid-state anharmonicity, yields approximate parabolic scaling laws that corroborate with a recent universal model derived from the Phonon Theory of Liquids [K.

Derivation of the Governing Differential Equation

The first-order phase transitions are governed by the CC equation, and differentiating it with respect to pressure yields a second-order differential equation dictating the melting curve in the low-pressure regime. By substituting Eq. p. 5

Where the paper says it

(4) and validated for the melting transition. 19 Substituting Eq.

(4) into Eq. (5), they obtain a relationship where the slope of the ML is expressed as a function of specific volumes. p. 2
Where the paper says it

(1), regarding a variable latent heat (𝛿𝐻) utilizing recent theoretical progress, according to which the heat capacity of a crystalline solid is the sum of two components: a vibrational component and a volume component. 17,18 The anharmonic component dominates at high temperatures, particularly near the melting point, and is expressed exclusively as a function of the liquid and solid specific volumes at the melting point.

The final differential equation, simplified under the assumption that d >> b, reduces to a simple form that allows for an approximate parabolic solution. p. 2
Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

Physical Constraints and Solution

To render the function describing a ML physically sound in the low-pressure region, precise constraints must be imposed on the constants of integration to guarantee that the curve maintains a strictly monotonically increasing and convex profile. The resulting general solution is given by Eq. p. 6

Where the paper says it

Given these assumptions and constraints, 𝑑𝜀 𝑑𝑇𝑚 = ( 𝜕𝜀 𝜕𝑇) 𝑃 + ( 𝜕𝜀 𝜕𝑃) 𝑇 𝑑𝑃 𝑑𝑇 ≈ 0. This simplification facilitates the solution to Eq.

(13), which represents a mathematical solution to Eq. p. 8
Where the paper says it

(10) is: 𝑃(𝑇𝑚) ≅ 𝑑 𝑏 𝑇𝑚 − 𝑐1 𝑏 𝑒 −𝑏𝑇𝑚 + 𝑐2 (13) where 𝑐1 and 𝑐2 are integration constants. Eq, (13) represents a mathematical solution to Eq.

(10). The integration constants are determined by requiring the ML to pass through the points of zero-pressure melting point and the triple point. p. 8
Where the paper says it

(13) yields: 𝑑𝑃 𝑑𝑇𝑚 = 𝑑 𝑏 + 𝑒 −𝑏𝑇𝑚. Investigation of the monotonicity of the function 𝑃(𝑇𝑚) requires determination of the integration constant 𝑐1, which was found to be negative above: The melting curve is constrained by passing through two characteristic boundary points for each system: zero-pressure melting point (𝑇0, 0) and the triple point (𝑇𝑐 ,𝑃𝑐).

Universal Predictions and Agreement with Existing Theories

The analysis yields an approximate parabolic description of the ML across the entire (P − T) phase diagram, which is a universal function determined by fundamental thermophysical quantities. The predicted slope of a ML is approximately equal to betaLBL, which aligns with predictions from Trachenko’s theory based on the Phonon Theory of Liquids (PTL). p. 9

Where the paper says it

Therefore, the slope of a ML is approximately: 𝑑𝑃 𝑑𝑇𝑚 ≈ 𝛽𝐿𝐵𝐿 . Notably, a slope equal to approximately 𝛽𝐿𝐵𝐿 was also predicted by Trachenko, whose model of MLs is derived from the Phonon Theory of Liquids (PTL).

This striking agreement establishes the universal parabolic nature of low-pressure melting curves. p. 0
Where the paper says it

Trachenko, Phys. E 109, 034122 (2024)], supporting the universal parabolic nature of melting curves from a completely distinct theoretical foundation.

Conclusion

The proposed framework successfully bypasses historical assumptions about a constant latent heat by accounting for the anharmonic, volume-dependent nature of solid heat capacity and fusion enthalpy. The model relies entirely on fundamental, measurable quantities to define its parameters. p. 0

Where the paper says it

The parameters of these analytic functions are defined exclusively by fundamental thermophysical properties, including the bulk moduli, thermal expansion coefficients, and specific volumes of the coexisting phases, as well as the isobaric heat capacity of the solid state. Our derivation, rooted in solid-state anharmonicity, yields approximate parabolic scaling laws that corroborate with a recent universal model derived from the Phonon Theory of Liquids [K.

The predictions regarding the parabolic nature of melting curves and their initial slopes are in striking agreement with established theories. p. 9
Where the paper says it

Notably, a slope equal to approximately 𝛽𝐿𝐵𝐿 was also predicted by Trachenko, whose model of MLs is derived from the Phonon Theory of Liquids (PTL). 5 The experimental justification of the common prediction of the two independent theories that the slopes of the melting curves are approximately equal 𝛽𝐿𝐵𝐿 for various materials (such as Ar , He, H2, H20, In, Fe) has was discussed by Trachenko.

--- Page 1 ---

The solid-liquid transition represents one of the most fundamental and universally recognized phase changes in condensed matter physics.;

--- Page 2 ---

In a pressure-temperature (P − T) phase diagram, the boundary separating these two states is defined as the melting line (ML).;

--- Page 3 ---

A novel theory yielding a universal analytical equation for MLs was proposed recently by Trachenko.;

--- Page 4 ---

The aim of the present work is the search of universal functions describing the melting curves of simple materials by modifying the CC Eq. (1), regarding a variable latent heat (deltaH) utilizing recent theoretical progress, according to which the heat capacity of a crystalline solid is the sum of two components: a vibrational component and a volume component. p. 2

Where the paper says it

The aim of the present work is the search of universal functions describing the melting curves of simple materials by modifying the CC Eq. (1), regarding a variable latent heat (𝛿𝐻) utilizing recent theoretical progress, according to which the heat capacity of a crystalline solid is the sum of two components: a vibrational component and a volume component.

;

--- Page 5 ---

The ratio of the isobaric heat capacity to the thermal volume expansion coefficient (epsilon =CP,S/betaS) in solid state is a material’s constant that scales the fusion enthalpy (deltaH) to the specific volume change (deltalnv) during a transition from the solid to liquid state.;

--- Page 6 ---

Substituting Eq. (4) into Eq. (5), we obtain: dP/dTm = κln(vL/vS) dv (6). p. 5

Where the paper says it

(4) into Eq. (5), we obtain: 𝑑𝑃 𝑑𝑇𝑚 = 𝜀𝑙𝑛( 𝑣𝐿 𝑣𝑆 ) 𝛿𝑣 (6) Evaluation of the temperature and pressure dependence of 𝛆: By rearranging the CC equation (Eq.

;

--- Page 7 ---

d2P/dTm2 + b dP/dTm = d (10).;

--- Page 8 ---

A general solution of the second-order linear non-homogeneous ordinary differential Eq. (10) is: P(Tm) ≈ d/b Tm2 + c1/b e-bTm + c2 (13).;

--- Page 9 ---

Eq, (21) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

--- Page 10 ---

Thus, dP/dTm ≈ d/b > 0.;

--- Page 12 ---

Eq. (21) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram.;

--- Page 13 ---

The predictions of this anharmonicity-based study regarding (i) the parabolic nature of the melting curves and (ii) the magnitude of their initial slopes dP/dTm ≈ βLBL are in striking agreement with those of Trachenko’s theory based on the Phonon Theory of Liquids (PTL).

--- Page 14 ---

--- Page 15 ---

This model relies on no empirical fitting; its parameters are entirely governed by fundamental, measurable quantities, such as the bulk moduli, thermal expansion coefficients, and specific volumes of the coexisting phases, as well as the isobaricheat capacity of the solid state.;

--- Page 20 ---

--- Page 21 ---

--- Page 22 ---

--- Page 23 ---

--- Page 24 ---

--- Page 25 ---

--- Page 2605.17631>

Eq. (2605.17631) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(2)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(3)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(4)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(5)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(6)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(7)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(8)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(9) is written in a simple form: d2P/dTm2 + b dP/dTm = d (10). p. 7

Where the paper says it

(9) is written in a simple form: 𝑑 2𝑃 𝑑𝑇𝑚 2 + 𝑏 𝑑𝑃 𝑑𝑇𝑚 = 𝑑 (10) where: 𝑏 ≡ 𝑑𝑙𝑛(𝑣𝐿−𝑣𝑆 ) 𝑑𝑇𝑚 + 𝜀 (𝑣𝐿−𝑣𝑆 ) ( 1 𝐵𝐿 − 1 𝐵𝑆 ) (11) 𝑑 ≡ (𝛽𝐿−𝛽𝑆 ) (𝑣𝐿−𝑣𝑆 ) 𝜀 (12) Solving the final differential equation requires knowing the signs and typical values of parameters b and d: a. The signs of parameters b and d: The melting transition usually results in a swelling of the molar volume, thus: 𝛿𝑣 ≡ 𝑣𝐿 − 𝑣𝑆 > 0.

p. 7
Where the paper says it

(9) is written in a simple form: 𝑑 2𝑃 𝑑𝑇𝑚 2 + 𝑏 𝑑𝑃 𝑑𝑇𝑚 = 𝑑 (10) where: 𝑏 ≡ 𝑑𝑙𝑛(𝑣𝐿−𝑣𝑆 ) 𝑑𝑇𝑚 + 𝜀 (𝑣𝐿−𝑣𝑆 ) ( 1 𝐵𝐿 − 1 𝐵𝑆 ) (11) 𝑑 ≡ (𝛽𝐿−𝛽𝑆 ) (𝑣𝐿−𝑣𝑆 ) 𝜀 (12) Solving the final differential equation requires knowing the signs and typical values of parameters b and d: a. The signs of parameters b and d: The melting transition usually results in a swelling of the molar volume, thus: 𝛿𝑣 ≡ 𝑣𝐿 − 𝑣𝑆 > 0.

;

Eq. (2(1)) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(4) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(5) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(8) provides an approximate parabolic description of the ML across the entire (P − T) phase diagram. p. 2

Where the paper says it

19,20 Differentiating the CC equation with respect to pressure for the low-pressure regime across the ML, a simple second order differential is obtained, an approximate solution of which is a parabolic function 𝑃(𝑇𝑚). The present work, together with that published recently by Trachenko5 , introduces a class of thermodynamic models for phase boundary (𝑃 − 𝑇) curves that bypass the historical assumption of an arbitrarily constant latent heat (𝛿𝐻).

;

Eq. (2(9) is written in a simple form: d2P/dTm2 + b dP/dTm = d (10).

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can model melting lines by accounting for a variable enthalpy of fusion along these lines, moving beyond constant latent heat approximations in standard Clausius-Clapeyron derivations. This allows the system to predict pressure dependence based on fundamental thermophysical properties like bulk moduli and thermal expansion coefficients.

  2. The improved system can derive a second-order differential equation dictating the melting curve in the low-pressure regime by differentiating the modified CC relation with respect to pressure. It can then solve this equation using physically acceptable approximate parabolic solutions derived from imposing appropriate boundary conditions.

  3. The system can utilize the relationship enthalpy of fusion delta H equals kappa times ln (volume liquid volume over volume solid volume) to calculate the latent heat for melting transitions. This incorporates a two-phase term involving both liquid and solid specific volumes, as described in equation 4: delta H equals kappa times ln (vL over vS).

  4. The AI can determine that the ratio of isobaric heat capacity to thermal volume expansion coefficient in the solid state is a material’s constant that scales the fusion enthalpy to the specific volume change during a transition from solid to liquid state, as defined by equation 3: kappa equals Cps over betaS.

  5. The system can approximate the melting line P(Tm) across low pressure values using an analytical expression derived from solving the final differential equation, which is approximately a parabolic function described by equation 21: P(Tm) equals one half of d times Tm squared plus c3 times Tm plus c4.

Abstract

Conventional derivations of phase boundaries from the Clausius-Clapeyron (CC) relation often employ the constant latent heat approximation to maintain analytical functions for sublimation and boiling curves. To address the complex thermodynamics of the solid-liquid transition, we develop a two-phase analytical model by modifying the CC equation to account for a variable enthalpy of fusion along the melting line. Our framework incorporates recent theoretical and experimental progress showing that the ratio of the isobaric heat capacity to the thermal volume expansion coefficient in the solid state is a material constant correlating with the fusion enthalpy and the specific volumes of coexisting phases during melting. Differentiation of this modified CC relation in the low-pressure regime yields a second-order differential equation dictating the melting curve. By imposing appropriate boundary conditions, physically acceptable approximate parabolic solutions are derived. The parameters of these analytic functions are defined exclusively by fundamental thermophysical properties, including the bulk moduli, thermal expansion coefficients, specific volumes of the coexisting phases, and the isobaric heat capacity of the solid state. Rooted in solid-state anharmonicity, our derivation yields approximate parabolic scaling laws that corroborate a recent universal model derived from the Phonon Theory of Liquids [K. Trachenko, Phys. Rev. E 109, 034122 (2024)], supporting the universal parabolic nature of melting curves from a completely distinct theoretical foundation.

Related papers