Few-Shot Physics-Informed Neural Network for Shape Reconstruction of Concentric-Tube Robots

arXiv:2605.12790 · cs.RO · Submitted 2026-05-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Few-Shot Physics-Informed Neural Network for Shape Reconstruction of Concentric-Tube Robots".

Dev: Here's the gist of the paper. Modeling concentric tube robots (CTRs) involves complex nonlinear continuum mechanics, and despite recent progress, physics-based models often lack an accurate representation of the experimental setups <ref:2605.12790#pg2> Deep neural network-based models have been explored as alternatives with superior accuracy; however, they often overlook known mechanics, require large training datasets, and typically discard shape estimation of the robot <ref:2605.12790#pg4> We present a physicsinformed neural network (PINN) for kinematic modeling of a 6-DoF CTR with three pre-curved tubes that embeds the Cosserat rod differential equations and learns from few-shot observational data, balancing physics priors with data-driven fitting <ref:2605.12790#pg2> PINN enables full-state estimation of shape, twist angle, torsional strain, bending moment, and orientation <ref:2605.12790#pg2> Benchmark tests show a mean shape error below 1% of the robot length and accurately recovered other kinematic states, outperforming a purely physics-based Cosserat rod model baseline while using a minimal training set <ref:2605.12790#pg5> The resulting model is also computationally efficient and robust, making it well-suited for real-time control applications <ref:2605.12790#pg2>.

Rosa: Kinematic Modeling Foundation The paper establishes the physical foundation of the CTR using Cosserat rod theory to describe its kinematics <ref:2605.12790#pg4> The shape of a rod (tube) of length l is represented by a continuous homogeneous transformation g(s) ∈ SE(3) along the centerline of the rod, where g(s) consists of a position vector p(s) ∈ R 3 and a rotation matrix R(s) ∈ SO(3), where s ∈

0, l: denotes the arc-length <ref:2605.12790#pg4> The spatial derivatives of R and p are given by R˙ = R ub, p˙ = R v (1) <ref:2605.12790#pg4>.

Dev: The static equilibrium equations for an n-tube CTR involve summing the contributions from all tubes <ref:2605.12790#pg4> The internal force and moment at a cross-section are given by the sum of the contributions from each tube <ref:2605.12790#pg4>.

Rosa: PINN Framework and Training Strategy The proposed PINN approximates the mapping φ: R 7 → R 15, where inputs are arc-length and joint actuation

s, τ: ∈

0, l1: × R 6 <ref:2605.12790#pg4> The PINN architecture is an MLP with six hidden layers and 100 nodes per layer <ref:2605.12790#pg4> The training loss function (15) balances the ODE loss, boundary loss, and observation loss <ref:2605.12790#pg4> The ODE loss enforces that the derivative of the PINN output follows the system dynamics x˙, while the boundary and observation loss terms anchor the solution to specified regions of state space <ref:2605.12790#pg4>.

Paper summary: Dev: So wrapping up this discussion on the paper "Few-Shot Physics-Informed Neural Network for Shape Reconstruction of Concentric-Tube Robots", the core idea is using a PINN to model these three tube robots.

Rosa: The main claim is that by embedding the Cosserat rod differential equations and learning from just a few experimental observations, they can get full state estimation.

Dev: They found that this method achieves an average shape error under one percent of the robot's length, which beats the purely physics based Cosserat rod model baseline.

Taro: It’s a strong result for using minimal data to achieve high accuracy in complex kinematic modeling where you need to know the shape, twist angle, and bending moment.

Rosa: It suggests that for some complex physical systems like these tubes, combining physics constraints with neural network fitting is a way forward when large datasets are scarce.

Dev: This approach could help us get better predictive models for robot kinematics that are more robust than purely data driven methods alone.

Conclusion: Rosa: So we’re wrapping up this look at the paper called "Few-Shot Physics-Informed Neural Network for Shape Reconstruction of Concentric-Tube Robots."

Dev: Basically, they built a system that uses physics rules—specifically Cosserat rod math—to train an AI to figure out the exact shape of these three tube robots with just a tiny bit of experimental data.

Taro: They’re not training this on millions of hours of footage; they're using only a few hundred observations from the very end tip to get the whole structure right.

Rosa: The main implication here is that we can get high accuracy for complex robot shapes without needing massive amounts of data.

Dev: And they found that this physics-informed network actually beats a standard, purely physics-based model baseline in terms of shape error—we're talking under one percent of the tube's length.

Taro: It’s interesting because it shows the AI isn't just memorizing data; it’s learning from the physical constraints, which helps when things go wrong in real life.

Rosa: Right, so they managed to balance what we know about physics with what we see in reality using a small dataset.

Dev: But there are still limits, though the paper flags that this approach only works well for robot designs that have unique solutions; it doesn't handle configurations where things snap.

Taro: Exactly. If the world throws something at you and it snaps instead of deforming smoothly, this specific method won't catch that failure mode gracefully yet.

Rosa: It’s a good start, though, proving that we can use physics to guide these kinds of deep learning models effectively.

Dev: And while they said the training process is time-consuming for each new robot design, the resulting model itself is pretty efficient for running in real-time control loops.

Taro: That efficiency in real-time is key; if you can use this model on a fast loop, it’s more useful than a super accurate simulation that takes hours to run.

Rosa: So the conclusion is that this PINN gives us a tool for kinematic modeling that is both more accurate and practical for actual robot control.

Dev: And they are pointing toward using multi-agent PINNs next, which might help them handle those snapping situations we talked about earlier.

Navid Feizi, Filipe C. Pedrosa, Rajni V. Patel, Jagadeesan Jayender

Brigham and Women’s Hospital · Harvard Medical School · Canadian Surgical Technologies and Advanced Robotics (CSTAR) · Western University

cs.RO

Submitted: 2026-05-12

Updated: 2026-05-12

Comments: to be published in 2026 IEEE International Conference on Robotics & Automation proceedings

DOI: 10.1109/ICRA57385.2026.11695877

License: http://creativecommons.org/licenses/by-nc-nd/4.0/

Importance score: 90/100

The gist: Modeling concentric tube robots (CTRs) involves complex nonlinear continuum mechanics, and despite recent progress…

Key concepts

Cosserat Rod Theory
This is a mathematical framework used to describe the kinematics of flexible rods or tubes, like the CTR. It uses continuous transformations (g(s)) along the tube's length to define its shape and orientation at every point. This theory provides the underlying physics equations that guide how the robot moves and deforms.
Physics-Informed Neural Network (PINN)
A PINN is a type of deep learning model that incorporates physical laws directly into its training process. Instead of just learning from data, it is trained to satisfy differential equations, such as the Cosserat rod equations. This allows the model to generate physically plausible shapes while simultaneously fitting experimental observations.
Kinematic Modeling
This involves creating a mathematical representation of how a robot moves and changes shape based on its inputs (like joint actuation). The paper uses this to map control inputs (arc-length and joint angles) to the full state of the robot, including its 3D shape, twist angle, and orientation.
Few-Shot Learning
This refers to training a model effectively when only a very small amount of data is available. The PINN is designed to learn from only about 500 experimental observations. This demonstrates the network's ability to generalize complex physical behaviors from limited real-world examples, balancing physics knowledge with minimal data.

Terminology

Summary

Modeling concentric tube robots (CTRs) involves complex nonlinear continuum mechanics, and despite recent progress, physics-based models often lack an accurate representation of the experimental setups <ref:2605. p. 0

Where the paper says it

Pedrosa*, Rajni V. Patel**, and Jagadeesan Jayender** Abstract— Modeling concentric tube robots (CTRs) involves complex nonlinear continuum mechanics, and despite recent progress, physics-based models often lack an accurate representation of the experimental setups.

12790#pg2> Deep neural network-based models have been explored as alternatives with superior accuracy; however, they often overlook known mechanics, require large training datasets, and typically discard shape estimation of the robot <ref:2605. p. 0
Where the paper says it

Patel**, and Jagadeesan Jayender** Abstract— Modeling concentric tube robots (CTRs) involves complex nonlinear continuum mechanics, and despite recent progress, physics-based models often lack an accurate representation of the experimental setups. To overcome these limitations, deep neural network-based models have been explored as alternatives with superior accuracy; however, they often overlook known mechanics, require large training datasets, and typically discard shape estimation of the robot.

12790#pg4> We present a physicsinformed neural network (PINN) for kinematic modeling of a 6-DoF CTR with three pre-curved tubes that embeds the Cosserat rod differential equations and learns from few-shot observational data, balancing physics priors with data-driven fitting <ref:2605. p. 0
Where the paper says it

To overcome these limitations, deep neural network-based models have been explored as alternatives with superior accuracy; however, they often overlook known mechanics, require large training datasets, and typically discard shape estimation of the robot. We present a physicsinformed neural network (PINN) for kinematic modeling of a 6-DoF CTR with three pre-curved tubes that embeds the Cosserat rod differential equations and learns from few-shot observational data, balancing physics priors with data-driven fitting.

12790#pg2> PINN enables full-state estimation of shape, twist angle, torsional strain, bending moment, and orientation <ref:2605. p. 0
Where the paper says it

We present a physicsinformed neural network (PINN) for kinematic modeling of a 6-DoF CTR with three pre-curved tubes that embeds the Cosserat rod differential equations and learns from few-shot observational data, balancing physics priors with data-driven fitting. PINN enables full-state estimation of shape, twist angle, torsional strain, bending moment, and orientation.

12790#pg2> Benchmark tests show a mean shape error below 1% of the robot length and accurately recovered other kinematic states, outperforming a purely physics-based Cosserat rod model baseline while using a minimal training set <ref:2605. p. 0
Where the paper says it

PINN enables full-state estimation of shape, twist angle, torsional strain, bending moment, and orientation. Benchmark tests show a mean shape error below 1% of the robot length and accurately recovered other kinematic states, outperforming a purely physics-based Cosserat rod model baseline while using a minimal training set.

12790#pg5> The resulting model is also computationally efficient and robust, making it well-suited for real-time control applications <ref:2605. p. 0
Where the paper says it

Benchmark tests show a mean shape error below 1% of the robot length and accurately recovered other kinematic states, outperforming a purely physics-based Cosserat rod model baseline while using a minimal training set. The resulting model is also computationally efficient and robust, making it well-suited for real-time control applications.

12790#pg2>.

Kinematic Modeling Foundation

The paper establishes the physical foundation of the CTR using Cosserat rod theory to describe its kinematics <ref:2605.12790#pg4> The shape of a rod (tube) of length l is represented by a continuous homogeneous transformation g(s) ∈ SE(3) along the centerline of the rod, where g(s) consists of a position vector p(s) ∈ R 3 and a rotation matrix R(s) ∈ SO(3), where s ∈ [0, l] denotes the arc-length <ref:2605. p. 1

Where the paper says it

PRELIMINARIES A. Cosserat Rod Theory a) Kinematics: Using Cosserat rod theory [10], [13], [14], the shape of a rod (tube) of length ℓ is represented by a continuous homogeneous transformation g(s) ∈ SE(3) along the centerline of the rod, where g(s) consists of a position vector p(s) ∈ R 3 and a rotation matrix R(s) ∈ SO(3), where s ∈ [0, ℓ] denotes the arc-length (for notational simplicity, we omit the explicit dependence on s in the following equations).

12790#pg4> The spatial derivatives of R and p are given by R˙ = R ub, p˙ = R v (1) <ref:2605. p. 1
Where the paper says it

Cosserat Rod Theory a) Kinematics: Using Cosserat rod theory [10], [13], [14], the shape of a rod (tube) of length ℓ is represented by a continuous homogeneous transformation g(s) ∈ SE(3) along the centerline of the rod, where g(s) consists of a position vector p(s) ∈ R 3 and a rotation matrix R(s) ∈ SO(3), where s ∈ [0, ℓ] denotes the arc-length (for notational simplicity, we omit the explicit dependence on s in the following equations). Accordingly, the spatial derivatives of R and p are given by R˙ = R ub, p˙ = R v (1) where v and u are the linear and angular strains, respectively.

12790#pg4>. The static equilibrium equations for an n-tube CTR involve summing the contributions from all tubes <ref:2605. p. 2
Where the paper says it

Equation (4) along with (1) forms a system of differential equations with boundary conditions at s = 0 and s = ℓ that can be solved to reconstruct the shape of a rod under external loads. d) Static Model of a Collection of Tubes: Considering a CTR composed of n tubes, the static equilibrium condition is obtained by summing the contributions from all tubes.

12790#pg4> The internal force and moment at a cross-section are given by the sum of the contributions from each tube <ref:2605. p. 2
Where the paper says it

d) Static Model of a Collection of Tubes: Considering a CTR composed of n tubes, the static equilibrium condition is obtained by summing the contributions from all tubes. Accordingly, the internal force and moment at a cross-section at arc-length s are given by the sum of the contributions from each tube as follows: Xn i=1 n˙ i + fi = 0 (5a) Xn i=1 m˙ i + p nb˙ i + li = 0 (5b) Assuming that the tubes are concentric, they share the same centerline curve p and tangent p˙ , while remaining free to twist independently.

12790#pg4>.

PINN Framework and Training Strategy

The proposed PINN approximates the mapping φ: R 7 → R 15, where inputs are arc-length and joint actuation [s, τ] ∈ [0, l1] × R 6 <ref:2605.12790#pg4> The PINN architecture is an MLP with six hidden layers and 100 nodes per layer <ref:2605. p. 3

Where the paper says it

Implementation The PINN approximates the mapping φ : R 7 → R 15 , where the inputs are arc-length and joints actuation [s, τ ] ∈ [0, ℓ1] × R 6 , and the output is the state xˆ(s) ⊆ R 15 . The PINN architecture is an MLP with six hidden layers and 100 nodes per layer, and the tanh activation function was used for all layers except the output layer.

12790#pg4> The training loss function (15) balances the ODE loss, boundary loss, and observation loss <ref:2605. p. 3
Where the paper says it

Assume a differential equation defined by x˙ = N (x, s) with boundary function g(x, sbound) = 0, PINN approximates x for s ∈ [0, ℓ]. The parameters of the neural network are trained by minimizing the following loss function: L = λodeLode + λbcLbc = 1 Node N Xode i=1 ∥∇s(xi) − N (xi, si)∥2 + 1 Nbc X Nbc i=1 ∥g(xi, si)∥2 (15) where xi is the PINN output at si and ∇s is the derivative operator with respect to s that can be computed by applying the chain rule using automatic differentiation, and Node and Nbc are the number of collocation points for the ODE and boundary conditions, respectively.

12790#pg4> The ODE loss enforces that the derivative of the PINN output follows the system dynamics x˙, while the boundary and observation loss terms anchor the solution to specified regions of state space <ref:2605. p. 3
Where the paper says it

also from the experimental observation dataset. The physics loss enforces the PINN to learns the evolution/dynamics of the system (7), such that ∇sxˆ, the derivative of PINNs with respect to s, follows the system dynamics x˙ , while the boundary and observation loss terms anchor the solution to the specified region of the state space.

12790#pg4>.

Data Utilization and Training Regimes

The training is performed in two stages, starting with simulation-based training where synthetic observations are generated using a Cosserat rod model <ref:2605.12790#pg4> The second stage incorporates experimental data by adding the observation loss Lobs to learn from the dataset published in [20] <ref:2605. p. 4

Where the paper says it

Samples are drawn over the actuation space τ ∈ B and at s = {ℓ1, ℓ2, ℓ3}. (b): Experiment-based training: We continue training by incorporating experimental tip-position measurements for tubes 1–3 from the dataset published in [20] into the observation loss Lobs.

12790#pg4>. For training, the arc-length was set to boundary points of the three tubes s = l3, i, l2, i, l1, i <ref:2605. p. 4
Where the paper says it

The boundary points were also sampled similarly for τ . However, the arc-length was set to the boundary points of the three tubes s = {0, ℓ3, ℓ2, ℓ1}.

12790#pg5> Actuation inputs were constrained to avoid snapping behavior by limiting proximal translation of tube 3 and restricting rotational inputs <ref:2605. p. 4
Where the paper says it

Since PINNs are not designed to handle such multi-modal behaviors [26], we restrict the actuation domain to avoid these scenarios. Specifically, the proximal translation of tube 3 was limited to TABLE II TRAINING DATA POINTS collocation boundary obs (model) obs ( [20] ) # samples 20,000 1,000 1,000 500 −10.

12790#pg5>.

Performance and Efficiency Gains

The PINN approach demonstrates superior performance in terms of both accuracy and runtime when compared to the Cosserat rod model <ref:2605.12790#pg5> Simulation results showed an average shape error of less than 1% along the backbone, and experimental results using the dataset in [20] showed that the mean position error is below 1% at the terminal points of the three tubes <ref:2605. p. 7

Where the paper says it

the backbone shape. Simulation results showed an average shape error of less than 1% along the backbone, and the experimental results using the dataset in [20] showed that the mean position error is below 1% at the terminal points of the three tubes.

12790#pg5> The PINN runtime is almost insensitive to actuation and arc-length, providing more consistent runtime essential for real-time applications <ref:2605. p. 6
Where the paper says it

, low torsion or small actuations). Consequently, PINN provides more consistent runtime, which is essential for real-time applications.

12790#pg5>.

Limitations and Future Directions

The proposed approach is limited to configurations that yield unique solutions, making it unsuitable for capturing snapping behavior <ref:2605.12790#pg5> Future work will aim to address this limitation by implementing a multi-agent PINN architecture <ref:2605. p. 6

Where the paper says it

However, it is limited to configurations that yield unique solutions, making it unsuitable for capturing snapping behavior. Future work will aim to address this limitation by implementing a multi-agent PINN architecture.

12790#pg5>. Also, although a very limited dataset is sufficient for training, this training process is time-consuming and must be conducted for each specific CTR parameter design <ref:2605. p. 6
Where the paper says it

Future work will aim to address this limitation by implementing a multi-agent PINN architecture. Also, although a very limited dataset is sufficient for training, this training process is time-consuming and must be conducted for each specific CTR parameter design.

12790#pg5> Future work will address this limitation by developing a foundational model that can adapt to a variety of CTR designs rather than just one <ref:2605. p. 6
Where the paper says it

Also, although a very limited dataset is sufficient for training, this training process is time-consuming and must be conducted for each specific CTR parameter design. Future work will address this limitation by developing a foundational model that can adapt to a variety of CTR designs rather than just one.

12790#pg5>.

Conclusion

In this work, we propose a PINN to model the kinematic of a three-tube CTR in free space <ref:2605.12790#pg5> The PINN integrates the Cosserat rod differential equations and boundary conditions, together with a very small dataset of only 500 experimental observations of the distal tip of the CTR, to learn the mapping from actuation to the full latent state, including <ref:2605. p. 6

Where the paper says it

CONCLUSIONS In this work, we propose a PINN to model the kinematic of a three-tube CTR in free space. The PINN integrates the Cosserat rod differential equations and boundary conditions, together with a very small dataset of only 500 experimental observations of the distal tip of the CTR, to learn the mapping from actuation to the full latent state, including

12790#pg5> Simulation results showed an average shape error of less than 1% along the backbone, and the experimental results using the dataset in [20] showed that the mean position error is below 1% at the terminal points of the three tubes <ref:2605. p. 7
Where the paper says it

the backbone shape. Simulation results showed an average shape error of less than 1% along the backbone, and the experimental results using the dataset in [20] showed that the mean position error is below 1% at the terminal points of the three tubes.

12790#pg5> Furthermore, the proposed approach could enhance runtime efficiency compared to the traditional Cosserat rod model, making it more suitable for real-time control and planning <ref:2605. p. 7
Where the paper says it

Simulation results showed an average shape error of less than 1% along the backbone, and the experimental results using the dataset in [20] showed that the mean position error is below 1% at the terminal points of the three tubes. Furthermore, the proposed approach could enhance runtime efficiency compared to the traditional Cosserat rod model, making it more suitable for real-time control and planning.

12790#pg5>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. PINN for real-time forward kinematics of 6-DoF CTRs in free space can be implemented to balance physics priors with data-driven fitting, enabling full-state estimation of shape, twist angle, torsional strain, bending moment, and orientation while being computationally efficient for real-time control applications.

  2. The proposed PINN formulation reduces the number of required experimental measurements from tens of thousands to a few hundred by incorporating the Cosserat rod equations into the training loss function.

  3. The system can recover the entire 3D backbone shape of the CTR without using any shape-sensing modality, addressing a limitation in conventional DNN-based approaches that often disregard shape estimation.

  4. The PINN can estimate latent states such as twist angle, torsional strain, and orientation by embedding the governing physics into the training process alongside observational data.

  5. The model offers improved runtime efficiency compared to the traditional Cosserat rod model because it relies on a forward pass of an MLP rather than an iterative optimization based solver to solve the Cosserat rod BVP.

  6. The system can achieve shape estimation with a mean error below 1% of the robot length in simulation and accurately recover other kinematic states when trained using a minimal training set.

Abstract

Modeling concentric tube robots (CTRs) involves complex nonlinear continuum mechanics, and despite recent progress, physics-based models often lack an accurate representation of the experimental setups. To overcome these limitations, deep neural network-based models have been explored as alternatives with superior accuracy; however, they often overlook known mechanics, require large training datasets, and typically discard shape estimation of the robot. We present a physics-informed neural network (PINN) for kinematic modeling of a 6-DoF CTR with three pre-curved tubes that embeds the Cosserat rod differential equations and learns from few-shot observational data, balancing physics priors with data-driven fitting. PINN enables full-state estimation of shape, twist angle, torsional strain, bending moment, and orientation. Benchmark tests show a mean shape error below 1% of the robot length and accurately recovered other kinematic states, outperforming a purely physics-based Cosserat rod model baseline while using a minimal training set. The resulting model is also computationally efficient and robust, making it well-suited for real-time control applications.

Related papers