Characterizing the Scale Height and Filamentary Structure of Radiatively Cooled MADs

arXiv:2605.09326 · astro-ph.HE · Submitted 2026-05-10 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.

Vera: We're looking at the paper: "Characterizing the Scale Height and Filamentary Structure of Radiatively Cooled MADs".

Jocelyn: Here's the gist of the paper. Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks Here, we perform general relativistic magnetohydrodynamic (GR-MHD) simulations of magnetically arrested disks (MADs) around a non-spinning black hole We identify, both analytically and numerically, a transition mass accretion rate above which radiative cooling becomes faster than the heating, which is assumed to occur via local coupling to the magnetic field Above this mass accretion rate, cooling substantially reduces the gas thermal pressure, leading to considerably thinner and denser accretion filaments, and a substantial increase in radiative efficiency, relative to lower accretion rates We introduce an alternative definition based on the polar position of the density maximum, which more robustly characterizes the filamentary structure of the disks in the presence of strong magnetic fields and cooling.

Vera: Simulation Setup and Cooling Physics The numerical simulations are carried out using GPU-accelerated code cuHARM The cooling rate is calculated by considering the synchrotron and bremsstrahlung emission processes for sub-Eddington mass accretion rates up to M˙ ≲ 10−4M˙Edd.

Jocelyn: The cooling rate is defined as Λ = q−br + q−s, where q−br and q−s are the cooling rates due to bremsstrahlung and synchrotron, respectively.

Vera: Synchrotron cooling clearly dominates the radiative losses throughout the domain.

Title and authors: Vera: So, focusing on this paper, "Characterizing the Scale Height and Filamentary Structure of Radiatively Cooled MADs," what are the core ideas they are pushing forward?

Jocelyn: Well, they’re trying to figure out how radiative cooling affects the disk structure and dynamics by looking at how magnetic field accumulation regulates gas accretion in these inner regions.

Subrahmanyan: They identify a transition mass accretion rate above which the radiative cooling becomes faster than the heating that drives the gas flow, which they assume happens through local coupling to the magnetic field.

Vera: So, if you look at this paper's summary, it’s identifying both analytically and numerically this critical mass accretion rate where cooling gets fast enough to change everything about how the gas flows.

Jocelyn: Above that mass, cooling substantially reduces the gas thermal pressure, which leads to considerably thinner and denser accretion filaments and a substantial increase in radiative efficiency compared to lower accretion rates.

Subrahmanyan: That shift in energy balance modifies the internal disk structure and causes a significant decline in the disk thickness as gas loses its pressure support.

Vera: The paper also introduces an alternative definition for the disk height based on where the density maximum is located, which they say more robustly characterizes filamentary structures in disks with strong magnetic fields and cooling.

Jocelyn: That means their new method identifies contiguous regions of significant density throughout the domain and computes a local thickness in the theta direction instead of relying on a fixed equatorial plane assumption.

Subrahmanyan: This new method is better because it captures the actual mass concentration rather than averaging over non-symmetric voids, which is a problem with the traditional density-weighted angular scale height definition.

The paper's summary: Vera: So, to summarize what this paper says, it’s that at lower accretion rates, cooling isn't efficient enough to significantly reduce the gas temperature, so filaments can maintain their vertical pressure support.

Jocelyn: But as the mass accretion rate gets higher—above that critical point—the disk becomes radiatively efficient, and the disk height sharply decreases up to a radius of approximately thirty to forty gravitational radii.

Subrahmanyan: This behavior is attributed to enhanced radiative cooling up to those radii causing strong filamentation at smaller radii, which is what drives the structural change we see.

Vera: It’s worth noting that synchrotron cooling dominates the radiative losses across all mass accretion rates they considered in this work, even compared to bremsstrahlung.

Jocelyn: That means if you're looking at cooled MADs, you should expect synchrotron emission to be the main driver of those radiative losses throughout the whole disk structure.

Subrahmanyan: The paper also shows that at lower rates, cooling isn't efficient enough to significantly reduce gas temperature, which is why the filaments sustain their vertical support in those regimes.

Vera: So we see a clear distinction between low and high accretion rates: one regime where pressure support holds up and one where radiative cooling dominates the structure.

The paper's improvements: Jocelyn: They suggest that the traditional definition of disk height, which assumes density peaks at the midplane, doesn't actually represent the disk thickness accurately anymore.

Vera: That’s a key improvement; their new definition captures the actual mass concentration rather than a fixed geometric plane, allowing it to follow the local path of filaments instead of averaging over non-symmetric voids.

Subrahmanyan: This new diagnostic is supposed to be more accurate because it follows the local path of those filaments when cooling is involved, whereas the old one just gives you an average thickness.

Jocelyn: They also analytically derive conditions under which radiative cooling significantly affects disk structure, finding a critical mass accretion rate above which cooling becomes substantial enough to have a notable effect beyond some prescribed radius.

Vera: So they are providing a concrete threshold for when you should expect this structural change in the disk height based on the accretion rate you’re seeing.

Subrahmanyan: And they show that the disk height decreases monotonically with radius towards the black hole for high mass accretion rates, while at lower rates, disks maintain a relatively constant and puffed-up disk height.

Jocelyn: It’s telling us that the environment—the accretion rate—determines whether we see these thin filaments or thicker structures near the center.

Conclusion: Vera: So wrapping up this paper, the main implication is that traditional measurements of disk height can be misleading because they don't account for how cooling fundamentally alters the density distribution in these systems.

Jocelyn: The new method based on the polar position of density maximum gives us a better way to characterize the actual mass concentration and follow those filament paths more accurately.

Subrahmanyan: This work suggests that localized synchrotron hotspots within these filaments might produce different variability patterns depending on whether you are looking at lower or higher accretion rates.

Vera: And because synchrotron cooling is dominant across the entire range studied, this could have major implications for how we model the appearance of cooled MADs in real observations.

Jocelyn: So we’re leaving this paper thinking about how to better measure the structure of these disks by focusing on where the mass actually concentrates rather than a simple geometric height.

Subrahmanyan: For me, it’s important that we keep pushing for observational constraints that can tell us whether these theoretical models accurately predict those sharp transitions in structure based on accretion rates.

Vera: It’s a solid piece of work by Singh, Bégué, and Pe’er characterizing the scale height and filamentary structure of radiatively cooled MADs.

Akshay Singh, Damien Bégué, Asaf Pe’er

Bar-Ilan University

astro-ph.HE

Submitted: 2026-05-10

Updated: 2026-10-28

Comments: Accepted for publication in Astrophysical Journal after minor corrections

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 92/100

The gist: Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks Here…

Key concepts

Magnetically Arrested Disks (MADs)
These are black hole accretion disks where strong magnetic fields are threaded through the disk, effectively arresting the inflow of matter. The magnetic pressure balances the gravitational pull, leading to a specific, highly magnetized structure around the black hole that is central to this research.
Radiative Cooling ($\Lambda$)
This refers to how quickly gas loses energy by emitting radiation (synchrotron and bremsstrahlung). In this study, cooling is modeled as coupling locally to the magnetic field. Synchrotron cooling is found to be the dominant loss mechanism across all tested accretion rates.
Density-Weighted Angular Scale Height
This is a standard way to measure how thick an accretion disk appears vertically by weighting density measurements across different radii. The paper argues this method can be misleading in MAD flows because it assumes the densest part of the disk is always at the equatorial plane.
Maximum-Density Based Disk Height
This alternative diagnostic measures thickness by locating the highest point of gas density in a given region, rather than assuming a fixed midplane. This method is proposed as more robust for characterizing filamentary structures influenced by strong magnetic fields and cooling.

Terminology

Summary

Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks Here, we perform general relativistic magnetohydrodynamic (GR-MHD) simulations of magnetically arrested disks (MADs) around a non-spinning black hole We identify, both analytically and numerically, a transition mass accretion rate above which radiative cooling becomes faster than the heating, which is assumed to occur via local coupling to the magnetic field Above this mass accretion rate, cooling substantially reduces the gas thermal pressure, leading to considerably thinner and denser accretion filaments, and a substantial increase in radiative efficiency, relative to lower accretion rates We introduce an alternative definition based on the polar position of the density maximum, which more robustly characterizes the filamentary structure of the disks in the presence of strong magnetic fields and cooling. p. 0

Where the paper says it

We identify, both analytically and numerically, a transition mass accretion rate above which radiative cooling becomes faster than the heating, which is assumed to occur via local coupling to the magnetic field. Above this mass accretion rate, cooling substantially reduces the gas thermal pressure, leading to considerably thinner and denser accretion filaments, and a substantial increase in radiative efficiency, relative to lower accretion rates.

Simulation Setup and Cooling Physics

The numerical simulations are carried out using GPU-accelerated code cuHARM The cooling rate is calculated by considering the synchrotron and bremsstrahlung emission processes for sub-Eddington mass accretion rates up to M˙ ≲ 10−4M˙Edd. The cooling rate is defined as Λ = q−br + q−s, where q−br and q−s are the cooling rates due to bremsstrahlung and synchrotron, respectively. p. 2

Where the paper says it

In this subsection we use real physical units. We define Λ = q − br + q − s , (6) where q − br and q − s are the cooling rates due to bremsstrahlung and synchrotron, respectively.

Synchrotron cooling clearly dominates the radiative losses throughout the domain. p. 4
Where the paper says it

The top-right and bottom-left panels in Figure 1 compare the synchrotron and bremsstrahlung power. Synchrotron cooling clearly dominates the radiative losses throughout the domain (note the different color scales).

The electron temperature is set as a constant fraction of the proton temperature, defined by τ = Tp/Te = 3. p. 3
Where the paper says it

Rybicki & Lightman 1986) q − s = 4 3 cσT γ 2 eβ 2 eUBne erg cm−3 s −1 , (10) Here, σT is the Thomson cross-section, γe is the electron Lorentz factor (corresponding to the normalized velocity βe), and UB = b 2/2 (note that in the units used here, Ub = pb). Both the synchrotron and bremsstrahlung cooling rates depend on the electron temperature (Te), which we set as a constant fraction of the proton temperature; this assumption corresponds to a strong coupling between electrons and protons.

Structural Diagnostics and Scale Height

A commonly adopted diagnostic for the vertical thickness of accretion disks is the density-weighted angular scale height (Equation 14). This definition implicitly assumes that the equatorial plane coincides with the physical midplane of the disk. p. 6

Where the paper says it

This definition is well motivated and widely used in simulations of weakly magnetized (SANE) disks, where the density distribution is approximately symmetric about the equator. However, this diagnostic implicitly assumes that the equatorial plane coincides with the physical midplane of the disk.

The authors propose an alternative diagnostic based on the position of the density maximum, which more accurately captures the disk behavior under radiative cooling. p. 1
Where the paper says it

We demonstrate that the traditional definition of disk height can be misleading for MADs. We propose an alternative definition based on the position of the density maximum, which more accurately captures the disk behavior under the influence of radiative cooling.

This new method identifies contiguous regions of significant density throughout the domain and computes a local thickness in the θ-direction. p. 8
Where the paper says it

The cells with densities below a fraction ffloor = 10 of this maximum, ρ < ρmax,global/ffloor, are excluded from further analysis. This threshold is used to identify contiguous regions of significant density throughout the domain.

Critical Accretion Rate Analysis

The results show that the disk height decreases as the rate of radiative cooling increases. The authors analytically derive conditions under which radiative cooling significantly affects the disk structure, finding a critical mass accretion rate above which cooling becomes substantial enough to have a notable effect on the structure and scale height of the accretion disk beyond some prescribed radius. p. 9

Where the paper says it

This occurs, as at high accretion rate, substantial radiative cooling causes considerable loss of gas pressure, enforcing strong filamentation at small radii, as seen in Figure 2 above. Here, we analytically derive the conditions under which radiative cooling significantly affects the disk structure.

This shift in the energy balance modifies the internal disk structure and leads to a significant decline in the disk thickness as gas loses its pressure support. p. 9
Where the paper says it

In this region, there is a considerable difference in disk height between disks with a very high accretion rate (10−4M˙ Edd) compared to those with lower accretion rates. This behavior is attributed to enhanced radiative cooling up to these radii: the disk loses internal energy through radiation, which reduces thermal pressure support and leads to a substantial decrease in the scale height in the inner regions.

Physical Interpretation of Results

The analysis reveals that at lower accretion rates, cooling is not efficient enough to significantly reduce the gas temperature, allowing filaments to sustain their vertical pressure support. In contrast, at higher mass accretion rates, the disk becomes radiatively efficient, and the disk height sharply decreases due to enhanced radiative cooling up to a radius of approximately 30–40 rg. p. 5

Where the paper says it

The radiative efficiency increases with the increase in the mass accretion rate due to enhanced cooling. Conversely, it decreases with increasing radius, where the disk becomes less efficient at radiating energy.

This behavior is attributed to enhanced radiative cooling up to these radii causing strong filamentation at small radii. p. 9
Where the paper says it

In this region, there is a considerable difference in disk height between disks with a very high accretion rate (10−4M˙ Edd) compared to those with lower accretion rates. This behavior is attributed to enhanced radiative cooling up to these radii: the disk loses internal energy through radiation, which reduces thermal pressure support and leads to a substantial decrease in the scale height in the inner regions.

The dominance of synchrotron cooling over bremsstrahlung is observed across all mass accretion rates considered in this work. p. 4
Where the paper says it

In contrast, bremsstrahlung cooling is much weaker everywhere and exhibits a more spatially extended distribution, with relatively higher values toward the dense midplane due to its sole density and temperature dependence. Across all accretion rates considered in this work,

Conclusions and Future Directions

The traditional definition of disk height does not accurately represent the disk thickness because it inherently assumes that the density peaks at the disk midplane. The new definition captures the actual mass concentration rather than a fixed geometric plane, allowing the diagnostic to follow the local path of filaments rather than averaging over non-symmetric voids. The work suggests that localized synchrotron hotspots within these filaments may produce different variability patterns depending on the mass accretion rate. p. 1

Where the paper says it

We showed that at higher accretion rates, the cooling rate due to synchrotron emission is sufficient to counterbalance the energy input from gravitational infall, leading to a notable change in the disk structure, a modulation of the MAD parameter, ϕB (ratio of magnetic flux to the mass accretion rate), and the jet efficiency, ηjet (ratio of energy flux to mass accretion rate). These results underscored the role of radiative losses in reshaping the force balance within the disk: as cooling becomes more effective, the thermal pressure support diminishes, and the magnetic stresses and the dynamical force become increasingly dominant in sustaining the disk equilibrium.

The dominance of synchrotron cooling could have major implications for the appearance of cooled MADs. p. 0
Where the paper says it

Draft version May 12, 2026 Typeset using LATEX default style in AASTeX631 Characterizing the Scale Height and Filamentary Structure of Radiatively Cooled MADs Akshay Singh , 1 Damien Bégué , 1 and Asaf Pe’er 1 1Bar-Ilan University, Ramat-Gan 5290002, Israel. ABSTRACT Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks.

References

Abramowicz, M. A., & Fragile, P. p. 0

Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

C. 2013, Living Reviews in Relativity, 16, 1

Asahina, Y., Takahashi, H. R., & Ohsuga, K. 2020, ApJ, 901, 96

Balbus, S. A., & Hawley, J. p. 3

Where the paper says it

In this work, we consider large disks with rin = 20rg and rp,max = 41rg. The basic disk model is rendered unstable in order to initiate accretion through the development of magneto-rotational instability (Balbus & Hawley 1998) by introducing minor random perturbation

F. 1998, Reviews of Modern Physics, 70, 1

Bégué, D., Pe’er, A., Zhang, G. p. 1

Where the paper says it

2021; Dihingia et al. 2023; Zhang et al.

Q., Zhang, B. p. 1
Where the paper says it

2021; Dihingia et al. 2023; Zhang et al.

B., & Pevzner, B. 2023, ApJS, 264, 32

Bisnovatyi-Kogan, G. S., & Ruzmaikin, A. p. 0

Where the paper says it

Within the framework of magnetohydrodynamics (MHD), two primary regimes of accretion have emerged based on the configuration and strength of the magnetic field: the Standard and Normal Evolution (SANE) state (Narayan et al. 2012) and the Magnetically Arrested Disk (MAD) state (Bisnovatyi-Kogan & Ruzmaikin 1976; Narayan et al.

A. 1976, Ap&SS, 42, 401

Bronzwaer, T., Davelaar, J., Younsi, Z., et al. 2018, A&A, 613, A2

Chael, A. 2025, MNRAS, 537, 2496

Chan, H.-S., Dexter, J., & Begelman, M. C. 2026, arXiv e-prints

Dibi, S., Drappeau, S. p. 3

Where the paper says it

Previous works (Dibi et al. 2012; Drappeau et al.

, Fragile, P. p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

C., Markoff, S., & Dexter, J. 2012, Monthly Notices of the Royal Astronomical Society, 426, 1928

Dihingia, I. K., Mizuno, Y., Fromm, C. M., & Rezzolla, L. p. 2

Where the paper says it

2006), cuHARM uses the finite volume method to numerically evolve the GRMHD equations (for reviews, see e. Martí & Müller 2003; Rezzolla & Zanotti 2013; Martí & Müller 2015).

2023, MNRAS, 518, 405

Drappeau, S., Dibi, S., Dexter, J., Markoff, S., & Fragile, P. C. 2013, MNRAS, 431, 2872

Esin, A. A., Narayan, R. p. 0

Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

, Ostriker, E., & Yi, I. 1996, ApJ, 465, 312

Event Horizon Telescope Collaboration, Akiyama, K., & Alberdi, e. a. 2022, The Astrophysical Journal Letters, 930, L12

Fishbone, L. G., & Moncrief, V. p. 3

Where the paper says it

In the definitions above, the subscript "ph" refers to a quantity with physical units (in cgs). Initial conditions We begin our simulations by initializing an un-magnetized axisymmetric torus in hydrostatic equilibrium around a non-rotating BH following Fishbone & Moncrief (1976).

1976, ApJ, 207, 962

Fragile, P. C., & Meier, D. p. 2

Where the paper says it

We use the cooling prescription provided by Esin et al. (1996) and Fragile & Meier (2009).

L. 2009, ApJ, 693, 771

Fragile, P. C., Middleton, M. J., Bollimpalli, D. A., & Smith, Z. 2025, MNRAS, 540, 2820

Gammie, C. F., McKinney, J. p. 0

Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

p. 0
Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

C., & Tóth, G. p. 2
Where the paper says it

Note that a factor of √ 4π is implicitly included in the electromagnetic field. The no-monopole constraint on the magnetic field ∇ · ⃗ B⃗ = 0 is written in the form ∂i( √ −gBi ) = 0, (5) and is numerically satisfied with the flux-CT method (Tóth 2000; Gammie et al.

2003, The Astrophysical Journal, 589, 444

Igumenshchev, I. V. 2008, ApJ, 677, 317

Kawazura, Y., Barnes, M., & Schekochihin, A. A. 2019, Proceedings of the National Academy of Science, 116, 771

Liska, M., Tchekhovskoy, A. p. 0

Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

p. 0
Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

p. 0
Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

p. 0
Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

, & Quataert, E. 2020, MNRAS, 494, 3656

Liska, M. T. P., Kaaz, N., Chatterjee, K., Emami, R., & Musoke, G. 2024, ApJ, 966, 47

Liska, M. T. P., Kaaz, N., Musoke, G., Tchekhovskoy, A., & Porth, O. p. 1

Where the paper says it

2012; Tchekhovskoy & McKinney 2012; Liska et al. 2020; Porth et al.

2023, ApJL, 944, L48

Liska, M. T. P., Musoke, G., Tchekhovskoy, A., Porth, O. p. 1

Where the paper says it

2012; Tchekhovskoy & McKinney 2012; Liska et al. 2020; Porth et al.

, & Beloborodov, A. M. 2022, The Astrophysical Journal Letters, 935, L1

Lubow, S. H., Papaloizou, J. C. B., & Pringle, J. E. 1994, MNRAS, 267, 235

Martí, J. M., & Müller, E. p. 2

Where the paper says it

2006), cuHARM uses the finite volume method to numerically evolve the GRMHD equations (for reviews, see e. Martí & Müller 2003; Rezzolla & Zanotti 2013; Martí & Müller 2015).

2003, Living Reviews in Relativity, 6, 7

McKinney, J. C., & Gammie, C. p. 2

Where the paper says it

3 The numerical simulations presented in this work are carried out using the GPU-accelerated code cuHARM (Bégué et al. Similarly to HARM (Gammie et al.

p. 2
Where the paper says it

3 The numerical simulations presented in this work are carried out using the GPU-accelerated code cuHARM (Bégué et al. Similarly to HARM (Gammie et al.

F. 2004, ApJ, 611, 977

McKinney, J. C., Tchekhovskoy, A., Sadowski, A., & Narayan, R. p. 0

Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

2014, Monthly Notices of the Royal Astronomical Society, 441, 3177

Narayan, R., Chael, A. p. 1

Where the paper says it

2017; Liska et al. 2022; Chael 2025; Wallace et al.

, Chatterjee, K., Ricarte, A., & Curd, B. 2022, MNRAS, 511, 3795

Narayan, R., Igumenshchev, I. p. 0

Where the paper says it

2012) and the Magnetically Arrested Disk (MAD) state (Bisnovatyi-Kogan & Ruzmaikin 1976; Narayan et al. 2003; Igumenshchev 2008).

V., & Abramowicz, M. p. 0
Where the paper says it

The characteristics and configuration of these disks are determined by factors such as the rate at which mass is accreted onto the BH and the nature of the magnetic fields, either generated within the disk itself or carried along with the accreting material from far distances (for reviews see, e. , Abramowicz & Fragile 2013; Yuan & Narayan 2014).

A. 2003, PASJ, 55, L69

Narayan, R., Sadowski, A., Penna, R. F., & Kulkarni, A. K. 2012, Monthly Notices of the Royal Astronomical Society, 426, 3241

Noble, S. C., Gammie, C. p. 2

Where the paper says it

3 The numerical simulations presented in this work are carried out using the GPU-accelerated code cuHARM (Bégué et al. Similarly to HARM (Gammie et al.

F., McKinney, J. C., & Del Zanna, L. 2006, ApJ, 641, 626

Porth, O., Mizuno, Y., Younsi, Z., & Fromm, C. M. 2021, MNRAS, 502, 2023

Porth, O., Chatterjee, K., Narayan, R., et al. 2019, ApJS, 243, 26

Rezzolla, L., & Zanotti, O. p. 2

Where the paper says it

2006), cuHARM uses the finite volume method to numerically evolve the GRMHD equations (for reviews, see e. Martí & Müller 2003; Rezzolla & Zanotti 2013; Martí & Müller 2015).

2013, Relativistic Hydrodynamics (Cambridge University Press)

Ripperda, B., Liska, M. p. 1

Where the paper says it

, Igumenshchev 2008; Narayan et al. 2012; Tchekhovskoy & McKinney 2012; Liska et al.

p. 1
Where the paper says it

, Igumenshchev 2008; Narayan et al. 2012; Tchekhovskoy & McKinney 2012; Liska et al.

, Chatterjee, K., et al. 2022, ApJL, 924, L32

Rowan, M. E., Sironi, L., & Narayan, R. 2019, ApJ, 873, 2

Rybicki, G. B., & Lightman, A. p. 3

Where the paper says it

The cooling rate by synchrotron radiation (per unit volume) is given by (e. Rybicki & Lightman 1986) q − s = 4 3 cσT γ 2 eβ 2 eUBne erg cm−3 s −1 , (10) Here, σT is the Thomson cross-section, γe is the electron Lorentz factor (corresponding to the normalized velocity βe), and UB = b 2/2 (note that in the units used here, Ub = pb).

P. 1986, Radiative Processes in Astrophysics (John Wiley & Sons, Ltd)

Salas, L., Liska, M., Markoff, S., et al. 2024, arXiv e-prints

Singh, A., Bégué, D. p. 0

Where the paper says it

Draft version May 12, 2026 Typeset using LATEX default style in AASTeX631 Characterizing the Scale Height and Filamentary Structure of Radiatively Cooled MADs Akshay Singh , 1 Damien Bégué , 1 and Asaf Pe’er 1 1Bar-Ilan University, Ramat-Gan 5290002, Israel. ABSTRACT Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks.

p. 0
Where the paper says it

Draft version May 12, 2026 Typeset using LATEX default style in AASTeX631 Characterizing the Scale Height and Filamentary Structure of Radiatively Cooled MADs Akshay Singh , 1 Damien Bégué , 1 and Asaf Pe’er 1 1Bar-Ilan University, Ramat-Gan 5290002, Israel. ABSTRACT Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks.

p. 0
Where the paper says it

Draft version May 12, 2026 Typeset using LATEX default style in AASTeX631 Characterizing the Scale Height and Filamentary Structure of Radiatively Cooled MADs Akshay Singh , 1 Damien Bégué , 1 and Asaf Pe’er 1 1Bar-Ilan University, Ramat-Gan 5290002, Israel. ABSTRACT Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks.

, & Pe’er, A. 2025, ApJL, 981, L11

Sądowski, A., Wielgus, M., Narayan, R., et al. 2017, Monthly Notices of the Royal Astronomical Society, 466, 705

Stepney, S., & Guilbert, P. p. 3

Where the paper says it

(9) In these equations, Θe = kBTe/mec 2 is the dimensionless electron temperature where Te is the electron temperature, kB is the Boltzmann constant, me is the mass of the electron, and the c is the speed of light. In the calculations of the cooling rate, the protons thermal motion is neglected (Stepney & Guilbert 1983).

W. 1983, MNRAS, 204, 1269

Tchekhovskoy, A., & McKinney, J. p. 0

Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

p. 0
Where the paper says it

2012), MADs accumulate enough magnetic flux in the vicinity of the BH to dynamically influence the inward flow. In this state, the magnetic pressure becomes comparable to the ram pressure of the infalling gas (Tchekhovskoy & McKinney 2012; Narayan et al.

C. 2012, MNRAS, 423, L55

Tchekhovskoy, A., Narayan, R., & McKinney, J. C. 2011, Monthly Notices of the Royal Astronomical Society: Letters, 418, L79

Tóth, G. 2000, Journal of Computational Physics, 161, 605

Wallace, J., Bégué, D., & Pe’er, A. 2025, arXiv e-prints

White, C. J., Mullen, P. D., Jiang, Y.-F., et al. 2023, ApJ, 949, 103

Wong, G. N., Du, Y., Prather, B. S., & Gammie, C. F. 2021, ApJ, 914, 55

Yoon, D., Chatterjee, K., Markoff, S. B., et al. 2020, Monthly Notices of the Royal Astronomical Society, 499, 3178

You, B., Cao, X., Yan, Z., et al. 2023, Science, 381, 961

Yuan, F., & Narayan, R. 2014, ARA&A, 52, 529

Zhang, G. Q., Bégué, D., Pe’er, A., & Zhang, B. p. 1

Where the paper says it

2021; Dihingia et al. 2023; Zhang et al.

B. 2024, ApJ, 962, 135

Zhang, L., Stone, J. M., Mullen, P. D., et al. 2025, ApJ, 995, 26

Acknowledgement

The Research required numerical calculations that were carried out on the NVIDIA Israel-1 supercomputer, using time generously allocated to us by NVIDIA.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can accurately predict disk scale height using an alternative definition based on polar position of density maximum, which more robustly characterizes the filamentary structure of the disks in the presence of strong magnetic fields and cooling.

  2. Improved AI can determine a critical mass accretion rate above which radiative cooling becomes faster than heating, leading to considerably thinner and denser accretion filaments by identifying where cooling is sufficient to counterbalance gravitational infall.

  3. Improved AI can distinguish between the traditional density-weighted angular scale height (Equation 14) and the new maximum-density-based disk height (Equation 15), allowing it to identify when the standard definition becomes misleading in MAD flows.

  4. Improved AI can predict the radius where cooling substantially affects disk structure, finding that the disk height decreases monotonically with radius towards the BH for high mass accretion rates, whereas lower rate disks show a relatively constant and puffed up disk height.

  5. Improved AI can calculate the physical impact of synchrotron cooling versus bremsstrahlung cooling across different mass accretion rates, confirming that synchrotron emission remains the dominant cooling mechanism throughout the studied range.

Abstract

Radiative cooling can strongly influence the structure and dynamics of black hole accretion disks. Here, we perform general relativistic magnetohydrodynamic (GR-MHD) simulations of magnetically arrested disks (MADs) around a non-spinning black hole. Radiative cooling is consistently included in the simulations and its intensity is scaled by the mass accretion rate ranging from 10-7 to 10-4 M dot Edd. Considering synchrotron and bremsstrahlung emission, we quantify how radiative losses modify the disk structure and the accretion dynamics. In the inner MAD disk regions, accumulation of magnetic field regulates gas accretion, enforcing the gas into a discrete interchange-driven filamentary structure. We identify, both analytically and numerically, a transition mass accretion rate above which radiative cooling becomes faster than the heating, which is assumed to occur via local coupling to the magnetic field. Above this mass accretion rate, cooling substantially reduces the gas thermal pressure, leading to considerably thinner and denser accretion filaments, and a substantial increase in radiative efficiency, relative to lower accretion rates. We show that under these conditions, conventional measures of the disk scale height become misleading in MAD flows. We therefore introduce an alternative definition based on the polar position of the density maximum, which more robustly characterizes the filamentary structure of the disks in the presence of strong magnetic fields and cooling.

Sources

Related papers