Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamic mode decomposition

arXiv:2605.06199 · physics.comp-ph · Submitted 2026-05-07 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamic mode decomposition".

Title and authors: Mira: So, to recap what we’ve covered, this paper introduces a data-driven framework using Koopman dynamic mode decomposition to reconstruct band structures and quantum geometry directly from spatiotemporal data, bypassing the need for an explicit Hamiltonian. We've touched on how this connects to Floquet-Bloch theory and how it can extract spectral properties.

Kai: Exactly, and the central question they are asking is whether an unknown system can be effectively described in terms of quasiparticle-like excitations like Bloch modes, localized modes, or collective oscillatory modes associated with pattern formation. The answer they give is yes.

Lev: That’s a strong claim for a data-driven method. What does that actually mean when we're dealing with real experimental noise and finite measurements? Does the reconstruction hold up under those kinds of conditions?

Mira: They demonstrate this connection numerically in prototypical one and two dimensional lattice models, specifically the SSH model, graphene, and Haldane models. Across these typical lattice models, they show that Koopman dynamic mode decomposition is computationally efficient for extracting these modes.

Kai: And beyond just the structure of the bands themselves, they show that you can infer topological invariants like winding numbers or Chern numbers through discrete gauge invariant formulas that are formally parallel to those computed in Hamiltonian Floquet-Bloch analysis.

Lev: Inferring topology from data is ambitious. If you’re building an error correction code, knowing the topological properties without solving the full Hamiltonian analytically would save us time, but what if the DMD modes are just noisy representations of something else?

Mira: They show that you can reconstruct the quantum geometric tensor by estimating the quantum metric from the fidelity between adjacent dynamic mode decomposition modes. This metric is insensitive to local phase fluctuations, which is a nice feature for robustness.

Kai: So, it’s about using data to get these topological and geometric properties, which we normally derive from a known Hamiltonian's structure. It bridges that gap between theoretical modeling and experimental observation in some way.

The paper's summary: Lev: If the authors are looking at this as an improvement over existing methods, what specific advantages are they claiming for their Koopman dynamic mode decomposition approach compared to traditional Floquet-Bloch methods?

Mira: They present a comparative formulation of Hamiltonian Floquet-Bloch decomposition and Koopman dynamics. The key difference they highlight is that the Floquet-Bloch method is equation based, while Koopman DMD is equation free but data driven.

Kai: So the improvement lies in this shift from top-down derivation to bottom-up inference, where you don't need a fully specified microscopic model to get these results. They claim that DMD can recover the band gap and group velocity, and group velocity dispersion directly from spatiotemporal data instead of an explicit Hamiltonian.

Lev: That’s appealing because it reduces the requirement for having perfect knowledge of the underlying physics at every single point in space or time. But what about systems where we only have limited measurements?

Mira: They show that you can reconstruct band dispersion and modal dynamics directly from spatiotemporal data including wavefunctions and observables, which is a key improvement over methods that rely on prior knowledge of the governing equations.

Kai: And they also claim this method is powerful enough to capture the crossover from spatially extended states to exponentially localized states in models like the Anderson model by analyzing things like the inverse participation ratio. That’s how you diagnose localization without solving for it first.

Lev: Diagnosing localization through an observable like the inverse participation ratio is helpful, but what if we're looking at something more complex than just simple localization? Like driven non-Hermitian systems where things are really messy?

Mira: They show that using the Center of Mass distribution of DMD modes can clearly distinguish between topological edge pinning, Non-Hermitian skin effect induced boundary accumulation, and random Anderson localization in these driven non-Hermitian systems.

The paper's improvements: Kai: So, to wrap up the paper "Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamic mode decomposition," the main point is that we can use data to reconstruct quasiparticle excitations and spatiotemporal coherent structures from data without needing a fully specified microscopic model.

Mira: And they show that this framework, by bridging Hamiltonian Floquet-Bloch decomposition and Koopman-DMD, allows us to infer band structure features, topological invariants like the quantum metric, and even the quantum geometric tensors directly from experimental observations.

Lev: From an error correction standpoint, it’s interesting because it offers a way to probe topological properties without requiring a full Hamiltonian diagonalization upfront. But I still have my concerns about how well this scales when we move this from the numerical demonstrations on lattices to actual hardware with limited measurement capability.

Kai: I agree, but the demonstration shows that for models like SSH and graphene, the extracted DMD modes agree closely with exact Floquet-Bloch results. It’s a strong link between data and theory in those specific settings.

Mira: So, while it's not a replacement for every theoretical tool, this paper provides a way to look at complex systems from the bottom up through observation rather than starting top down with an equation. We should definitely keep an eye on how this is applied to driven, disordered systems where we don't have perfect knowledge of the system dynamics.

Lev: Yeah, so it’s a complementary framework, where Hamiltonian methods derive structure from equations top-down and Koopman dynamic mode decomposition infers dynamics bottom-up from observation. That complementarity is really what makes this work useful for driven or disordered systems where the underlying model isn't perfectly known yet.

Kai: That's the picture we have now for this paper. It gives us a data-driven route to understanding band dispersion and quantum geometry by analyzing spatiotemporal data through Koopman dynamic mode decomposition.

Conclusion: Kai: So, we're wrapping up on "Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamic mode decomposition." The main idea is that you can figure out band structure and quantum geometry by looking at time-resolved data without needing a full equation for the system.

Mira: Exactly. They show that this Koopman dynamic mode decomposition method lets us extract things like the band gap and even the quantum metric from just observing spatiotemporal data, rather than starting with an explicit Hamiltonian model.

Lev: From an error-correction standpoint, that's a big deal because it means we can probe topological phases without having to solve for them analytically first. But I still wonder about the overhead for real hardware; how much measurement record do you actually need before this method becomes practical?

Kai: They tested it on models like the SSH and graphene systems, and those results matched what we get from standard Floquet-Bloch analysis. It shows the method is robust enough to work across different types of lattice physics.

Mira: The paper also highlights how you can reconstruct topological invariants like winding numbers or Chern numbers using formulas that are formally similar to the ones used in traditional Hamiltonian methods. That's a direct link between data and topology.

Lev: Inferring those topological properties from data is ambitious, but if the fidelity holds up under noisy measurements, it could be useful for characterizing real-world materials where we don't have perfect control over every parameter.

Kai: They also showed you can diagnose localization regimes by looking at how the DMD modes are distributed in energy versus the inverse participation ratio plane. That helps separate extended states from localized ones clearly.

Mira: And they even found a way to reconstruct the quantum metric and Berry curvature of those dynamic modes using gauge invariant formulas derived from link variables. That’s getting into genuine quantum geometry inference here.

Lev: That geometric tensor reconstruction is what I find most interesting for hardware applications; if we can map that to physical observables, it could give us new metrics to monitor the health of our qubit states.

Kai: So, in summary, this paper shows that Koopman dynamic mode decomposition provides a data-driven route to extract effective quasiparticle excitations and spatiotemporal coherent structures from data without needing a fully specified microscopic model.

Mira: It’s a powerful tool because it bridges the gap between rigorous theoretical modeling and mode-resolved inference from experimental data, especially in driven or disordered systems.

Lev: It's a good framework for checking what we think is happening in complex systems, but we still need to figure out the practical measurement limits before we can really rely on this for designing new hardware architectures.

Kai: That's right. We’ve seen how this Koopman dynamic mode decomposition approach lets us reconstruct band dispersion and quantum geometry directly from spatiotemporal data. Next up, we’re looking at how AI is changing the game in inverse design of free energy landscapes with diffusion models.

ShanghaiTech University · Newcastle University

physics.comp-ph

Submitted: 2026-05-07

Updated: 2026-11-17

Comments: 28 pages, 6 figures, 1 table

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 91/100

The gist: Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamic mode decomposition presents a framework to reconstruct band structures and topological properties directly from…

Key concepts

Hamiltonian Floquet-Bloch Decomposition (FBD)
This is a traditional method where physical properties like energy bands are calculated using an explicit mathematical model called a Hamiltonian. It relies on knowing the exact governing equations of the system, which can be complex, making it equation-based and requiring prior knowledge.
Koopman Dynamic Mode Decomposition (DMD)
This is a data-driven technique that approximates complex spatiotemporal data by decomposing it into fundamental spatial modes and their temporal dynamics. It works directly on observed data, allowing researchers to infer physical properties like band structure without needing the underlying equations.
Quantum Metric
The quantum metric is a geometric property of the system's quantum states that describes how distances and angles are measured in its state space. This paper shows it can be reconstructed from DMD modes using fidelity calculations between adjacent modes, providing insight into the system's underlying geometry.
Inverse Participation Ratio (IPR)
The IPR is a measure used to diagnose whether a state or mode is localized or extended in space. By analyzing how the IPR changes as disorder increases, researchers can distinguish between different physical regimes, such as extended states and exponentially localized states.

Terminology

Summary

Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamic mode decomposition presents a framework to reconstruct band structures and topological properties directly from spatiotemporal data without relying on an explicit Hamiltonian <ref:2605. p. 0

Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

06199#pg2> This framework establishes a correspondence between Hamiltonian Floquet-Bloch decomposition and Koopman-DMD, allowing for the extraction of spectral functions, local density of states, and quantum-geometric properties like the quantum metric <ref:2605. p. 0
Where the paper says it

This framework establishes a correspondence between Hamiltonian Floquet-Bloch decomposition and Koopman-DMD, whereby the extracted DMD modes encode frequencies, decay or growth rates, spatial profiles and projection weights. These quantities allow the reconstruction of spectral functions, local density of states, and delocalized-to-localized measures such as the inverse participation ratio.

06199#pg5>

Framework Comparison

The paper presents a comparative formulation of Hamiltonian Floquet-Bloch decomposition (FBD) and Koopman dynamical mode decomposition (DMD), highlighting their methodological difference where FBD is equation-based and Koopman DMD is equation-free but data-driven <ref:2605.06199#pg4> The primary distinction lies in how physical insight is derived, as FBD depends on the accuracy of a model Hamiltonian, whereas Koopman-DMD encodes it within the dataset itself <ref:2605. p. 2

Where the paper says it

When the data are sparse, noisy, or poorly resolved, the extracted DMD modes become unreliable. In Hamiltonian FBD, physical insight depends on the accuracy of the model Hamiltonian and governing equations, whereas in Koopman-DMD, it is encoded in the dataset itself.

06199#pg4>

Basic DMD and FBD

The basic DMD framework approximates complex spatiotemporal data by decomposing them into spatial modes, modal amplitudes, and temporal dynamics <ref:2605.06199#pg5> This decomposition allows the data to be written as a sum of extended modes and localized modes <ref:2605. p. 2

Where the paper says it

In this decomposition, the spatial modes 𝜙j represent coherent structures in space, including extended waves with characteristic momenta and localized modes with finite confinement lengths, where the complex frequencies 𝜔𝑗 determine the temporal evolution of each mode, including oscillation and decay or growth. Accordingly, 𝑋 ≈ [ | | | 𝜙1 ⋯ 𝜙𝑟 | | | ] [ 𝑤1 ⋱ 𝑤𝑟 ] [ 𝑒 −𝑖𝜔1𝑡1 ⋯ 𝑒 −𝑖𝜔1𝑡𝑚 ⋮ ⋱ ⋮ 𝑒 −𝑖𝜔𝑟𝑡1 ⋯ 𝑒 −𝑖𝜔𝑟𝑡𝑚 ], (1) so that the data can be written as

06199#pg5> The basic FBD framework provides a standard framework for systems with spatial and temporal periodicity, leading to the quasiband structure through the Floquet Hamiltonian or one-period evolution operator <ref:2605. p. 3
Where the paper says it

Basic FBD framework. The Floquet–Bloch theorem provides a standard framework for systems with spatial and temporal periodicity.

06199#pg5>

Band Physics Extraction

In the Koopman-DMD framework, band dispersion is extracted by projecting each extended DMD mode into momentum space to yield a band relation E(k) ≃ ħω(k) <ref:2605.06199#pg5> The paper demonstrates that DMD can recover the band gap, group velocity, and group-velocity dispersion from spatiotemporal data rather than an explicit Hamiltonian <ref:2605. p. 3

Where the paper says it

Once the eigenvalues and eigenstates are obtained, the Hamiltonian framework can be used to construct several classes of physical observables. Firstly, the band structure determines dynamical properties such as the energy gap, group velocity, and group-velocity dispersion, which controls pulse broadening and nonlinear propagation.

06199#pg5> Furthermore, the spectral density is reconstructed as an effective momentum-resolved spectral density using a Lorentzian sum weighted by modal projection weights <ref:2605. p. 0
Where the paper says it

This framework establishes a correspondence between Hamiltonian Floquet-Bloch decomposition and Koopman-DMD, whereby the extracted DMD modes encode frequencies, decay or growth rates, spatial profiles and projection weights. These quantities allow the reconstruction of spectral functions, local density of states, and delocalized-to-localized measures such as the inverse participation ratio.

06199#pg5>

Topological Invariants and Geometry

Topological invariants are inferred from DMD modes through discrete gauge-invariant formulas, such as the Zak phase in 1D or the Chern number in 2D, which are formally parallel to those computed in Hamiltonian FBD <ref:2605.06199#pg5> The quantum geometric tensor (QGT) can be reconstructed by estimating the quantum metric from the fidelity between adjacent DMD modes, which is insensitive to local phase fluctuations <ref:2605. p. 8

Where the paper says it

For instance, the real part of the QGT, namely the quantum metric 𝑔𝜇𝜈, measures the Fubini-Study distance between nearby quantum states. Rather than evaluating derivatives explicitly, the discrete quantum metric can be extracted from the fidelity (inner product overlap) between adjacent DMD modes: 𝑑𝑠 2 = 𝑔𝜇𝜈𝑑𝑘 𝜇𝑑𝑘 𝜈 ≈ 1 − |⟨𝑢 𝐷𝑀𝐷(𝑘𝑖 )|𝑢 𝐷𝑀𝐷(𝑘𝑗)⟩| 2 .

06199#pg5>

Benchmark Results

The study validates the Koopman-DMD approach across several tight-binding models, including disordered Su-Schrieffer-Heeger (SSH) and graphene models <ref:2605.06199#pg5> The results show that DMD can resolve the crossover from spatially extended states to exponentially localized states in the Anderson model by analyzing the Inverse Participation Ratio (IPR) <ref:2605. p. 8

Where the paper says it

Applying DMD to spatiotemporal wavefunction yields spatial modes ϕ𝑗 (𝑥) that, in the localized regime, exhibit exponential envelopes, |ϕ𝑗 (𝑥)| ∼ 𝑒 −|𝑥−𝑥j |/ξj , (13) from which the localization length ξj can be estimated by envelope fitting or, more robustly, by through inverse participation ratio (IPR) [18]. The disappearance of extended modes and the emergence of localized modes in the DMD spectrum therefore provide a direct dynamical signature of the localization-to-delocalization Anderson transition (see Fig.

06199#pg5> For topological phases, DMD successfully extracts nontrivial winding numbers and quantum metric tensors, confirming its sensitivity to higher-order topological boundary conditions <ref:2605. p. 7
Where the paper says it

This can be implemented using the Fukui–Hatsugai–Suzuki (FHS) construction [37], in which the link variable 𝑈𝛿 (k) = ⟨ 𝑢(𝑘) | 𝑢(𝑘 + 𝛿) ⟩ |⟨ 𝑢(𝑘) | 𝑢(𝑘 + 𝛿) ⟩| , (10) removes the arbitrary 𝑈(1) phase of independently extracted DMD modes. In this way, the computation of Chern numbers or winding numbers from DMD modes becomes formally parallel to that in Hamiltonian FBD, while retaining sensitivity to boundaries, defects, and finite-size structure.

06199#pg5>

Koopman Perspective on Observables

The appropriate variant of DMD is determined by the physical nature of the data, with exact DMD providing a natural approximation to the time-evolution operator for state-level data like wavefunctions <ref:2605.06199#pg5> For strongly projected observables, time-delayed (Hankel) DMD is more robust because it induces effective memory, and its extracted modes are better interpreted as effective density waves or scattering channels <ref:2605.06199#pg5>

Finale Remarks

Koopman-DMD provides a data-driven route to extracting effective quasiparticle excitations and spatiotemporal coherent structures from data without requiring a fully specified microscopic model <ref:2605.06199#pg5> Hamiltonian FBD and Koopman-DMD are complementary frameworks, where Hamiltonian methods derive structure from equations top-down, and Koopman-DMD infers dynamics bottom-up from observation <ref:2605. p. 2

Where the paper says it

Their primary difference is methodological: Hamiltonian FBD is equation-based, whereas Koopman DMD is equation-free but data-driven. Here we focus on crystalline solid-state and photonic lattice systems, for which the relevant descriptions include the Schrödinger equation, Maxwell’s equations, and reduced forms such as tight-binding models, and slow-varying-enveloped coupled-mode equations.

06199#pg5> This complementarity is particularly useful in driven, disordered, and partially unknown systems <ref:2605. p. 9
Where the paper says it

Koopman–DMD is particularly useful when disorder creates or suppresses boundary-localized modes. In this sense, DMD provides a datadriven route to detecting topological transitions in finite disordered systems.

06199#pg5>

Acknowledgments

Y. P. acknowledges the support of the NSFC (No. p. 1

Where the paper says it

The conventional equation-based Floquet–Bloch decomposition can, in principle, be complemented by a data-driven Koopman–DMD decomposition performed directly on spatiotemporal observables. Without prior knowledge of the equations of motion or the detailed system parameters, Koopman–DMD enables the direct extraction of Floquet–Bloch-like extended modes, as well as localized modes, from state data, and may further support reconstruction of an effective Hamiltonian and its associated band structure.

2023X0201-417-03) and the start-up fund from ShanghaiTech University <ref:2605. p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

06199#pg5>

Data and Code Availability

The code repository will be made publicly available on acceptance through an open-source link <ref:2605.06199#pg5>

Conflict of Interest

The authors declare no competing interests <ref:2605.06199#pg5>

References: [1] P. Coleman, Introduction to Many-Body Physics (Cambridge University Press, 2015). p. 2

Where the paper says it

3 disordered, periodically-driven, non-Hermitian, nonlinear, and many-body interacting systems from data, particularly through the identification of coherent oscillatory modes and spatial structures. In this paper, we establish a theoretical connection between Koopman–DMD analysis and band structures obtained from the Floquet–Bloch formalism, and support this connection with numerical demonstrations in prototypical one- and two-dimensional lattice models.

[2] S. H. Simon, The Oxford Solid State Basics (OUP Oxford, 2013). p. 1
Where the paper says it

By designing periodicity and material composition, one can create targeted band dispersion and bandgaps that govern electrical transport, optical absorption and emission, and light propagation. In solid-state physics, for example, bandstructure engineering modifies semiconductor bandgaps to regulate conductivity and optical response, enabling devices such as transistors, laser diodes, and high-efficiency solar cells.

[3] J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Molding the flow of light, Princet Univ Press Princeton NJ [Ua] 12, 33 (2008). p. 1
Where the paper says it

2 Introduction Band structure engineering seeks to manipulate the spatial or spatiotemporal periodicity of materials so as to tailor the energy ranges (bands) in which electrons in solids [1,2] or photons in dielectrics [3] are allowed or forbidden to propagate. By designing periodicity and material composition, one can create targeted band dispersion and bandgaps that govern electrical transport, optical absorption and emission, and light propagation.

[4] E. Yablonovitch, Inhibited spontaneous emission in solid-state physics and electronics, Phys Rev Lett. p. 1
Where the paper says it

By designing periodicity and material composition, one can create targeted band dispersion and bandgaps that govern electrical transport, optical absorption and emission, and light propagation. In solid-state physics, for example, bandstructure engineering modifies semiconductor bandgaps to regulate conductivity and optical response, enabling devices such as transistors, laser diodes, and high-efficiency solar cells.

58, 2059 (1987). [5] S. John, Strong localization of photons in certain disordered dielectric superlattices, Phys Rev Lett. 58, 2486 (1987). [6] F. Bloch, Über die quantenmechanik der elektronen in kristallgittern, Zeitschrift Für Physik 52, 555 (1929). [7] G. Floquet, Sur Les Équations Différentielles Linéaires à Coefficients Périodiques, in Annales Scientifiques de l’École Normale Supérieure, Vol. 12 (1883), pp. 47–88. [8] S.-I. Chu and D. A. Telnov, Beyond the Floquet theorem: generalized Floquet formalisms and quasienergy methods for atomic and molecular multiphoton processes in intense laser fields, Phys Rep. 390, 1 (2004). [9] M. Bukov, L. D’Alessio, and A. Polkovnikov, Universal high-frequency behavior of periodically driven systems: from dynamical stabilization to Floquet engineering, Adv Phys 64, 139 (2015). p. 1
Where the paper says it

Disorder and defects further break translational symmetry, limiting momentum-space analysis and often necessitating computationally expensive real-space supercell calculations. In addition, periodically driven (Floquet) systems require a quasienergy band description of nonequilibrium dynamics [8–10], which further increases theoretical and numerical complexity.

[10] A. Eckardt and E. Anisimovas, High-frequency approximation for periodically driven quantum systems from a Floquet-space perspective, New J Phys 17, 093039 (2015). p. 3
Where the paper says it

The Floquet–Bloch theorem provides a standard framework for systems with spatial and temporal periodicity. For a periodically driven quantum system with 𝐻(𝒓 + 𝑹,𝑡) = 𝐻(𝒓,𝑡) and 𝐻(𝒓,𝑡 + 𝑇) = 𝐻(𝒓,𝑡), where 𝑹 is a lattice vector and 𝑇 is the driving period, the wavefunction can be written in Bloch form, ψ𝑛,𝒌 (𝒓,𝑡) = 𝑒 𝑖𝒌⋅𝒓𝑢𝑛,𝒌 (𝒓,𝑡), where 𝑢𝑛,𝒌 is lattice-periodic in space.

[11] B. M. De Silva, D. M. Higdon, S. L. Brunton, and J. N. Kutz, Discovery of physics from data: Universal laws and discrepancies, Front Artif Intell 3, 25 (2020). p. 1
Where the paper says it

In addition, periodically driven (Floquet) systems require a quasienergy band description of nonequilibrium dynamics [8–10], which further increases theoretical and numerical complexity. To address these challenges, data-driven approaches have been increasingly important in modern physics.

[12] B. O. Koopman, Hamiltonian systems and transformation in Hilbert space, Proceedings of the National Academy of Sciences 17, 315 (1931). p. 9
Where the paper says it

Applied to DMD modes, the IPR provides a practical measure of real-space mode concentration and hence of localization. The same criterion can be generalized to other settings, including spin chains, and many-body Hilbert or Fock spaces [18].

[13] I. Mezić, Spectral properties of dynamical systems, model reduction and decompositions, Nonlinear Dyn 41, 309 (2005). p. 3
Where the paper says it

Firstly, the band structure determines dynamical properties such as the energy gap, group velocity, and group-velocity dispersion, which controls pulse broadening and nonlinear propagation. In systems with boundaries, defects, or disorder, the same framework also yields localized states such as edge and defect modes.

[14] C. W. Rowley, I. Mezić, S. Bagheri, P. Schlatter, and D. S. Henningson, Spectral analysis of nonlinear flows, J Fluid Mech 641, 115 (2009). p. 3
Where the paper says it

Koopman operator theory has emerged as a powerful framework in fluid dynamics, control theory, pure mathematics, and, more recently, physics [17,27,28]. Its central idea is to lift a finite-dimensional nonlinear dynamical system into a linear evolution in an infinitedimensional observable space.

[15] P. J. Schmid, Dynamic mode decomposition of numerical and experimental data, J Fluid Mech 656, 5 (2010). p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

[16] I. Mezić, Analysis of fluid flows via spectral properties of the Koopman operator, Annu Rev Fluid Mech 45, 357 (2013). p. 3
Where the paper says it

Koopman linearization. Koopman operator theory has emerged as a powerful framework in fluid dynamics, control theory, pure mathematics, and, more recently, physics [17,27,28].

[17] J. N. Kutz, S. L. Brunton, B. W. Brunton, and J. L. Proctor, Dynamic Mode Decomposition: Data-Driven Modeling of Complex Systems (SIAM, 2016). p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

[18] N. C. Murphy, R. Wortis, and W. A Atkinson, Generalized inverse participation ratio as a possible measure of localization for interacting systems, Physical Review B—Condensed Matter and Materials Physics 83, 184206 (2011). [19] https://www.emergentmind.com/topics/inverse-participation-ratio-ipr. p. 3
Where the paper says it

4 x(t) ≈ ∑𝜙𝑗𝑤𝑗𝑒 −𝑖𝜔𝑗 𝑡 𝑟 𝑗=1 = ∑𝑢𝑖(𝑘)𝑤𝑖𝑒 −𝑖𝜔𝑖 𝑡+𝑖𝒌𝒊 ⋅𝒓 ′ ⏟𝑖 Extended modes +∑𝜙𝑗𝑤𝑗𝑒 −𝑖𝜔𝑗 𝑡 ′′ ⏟𝑗 Localized modes . (2) We broadly classify the DMD modes into extended and localized branches, which will be later quantified using the inverse participation ratio (IPR) [18–20].

[20] W. F. de Oliveira and G. Q. Pellegrino, Chaos-based potentials in the one-dimensional tight-binding model probed by the inverse participation ratio, Computational and Applied Mathematics 37, 3995 (2018). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[21] R. Resta, Manifestations of Berry’s phase in molecules and condensed matter, Journal of Physics: Condensed Matter 12, R107 (2000). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[22] A. Gao, N. Nagaosa, N. Ni, and S.-Y. Xu, Quantum geometry phenomena in condensed matter systems, ArXiv Preprint ArXiv:2508. p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

00469 (2025). [23] J. Yu, B. A Bernevig, R Queiroz, E Rossi, P Törmä, and B-J Yang, Quantum geometry in quantum materials NPJ Quantum Mater 10, 101 (2025). p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

[24] Y. Jiang, T Holder, and B Yan Revealing quantum geometry in nonlinear quantum materials Reports on Progress in Physics 88, 076502 (2025). p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

[25] T Liu, X.-B. Qiang, H.-Z. Lu, and X. C Xie Quantum geometry in condensed matter Natl Sci Rev 12, nwae334 (2025). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[26] M. V Berry, Quantal phase factors accompanying adiabatic changes Proceedings of the Royal Society of London A Mathematical and Physical Sciences 392, 45 (1984). [27] M. J. Colbrook, The Multiverse of Dynamic Mode Decomposition Algorithms, in Handbook of Numerical Analysis, Vol. p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

25 (Elsevier, 2024), pp. 127–230. [28] S. Li, P. G Kevrekidis, and J Yang Characterization of elastic topological states using dynamic mode decomposition Phys Rev B 107, 184308 (2023). p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

[29] P Frame and A Towne, Space-time POD and the Hankel matrix PLoS One 18, e0289637 (2023). p. 2
Where the paper says it

Given a sequence of snapshots 𝑥(𝑡𝑘 ), we form the data matrix 𝑋 = [𝑥(𝑡1) 𝑥(𝑡2) ⋯ 𝑥(𝑡𝑚)], and seek a low rank-r approximation of the form 𝑋 ≈ Φ 𝑑𝑖𝑎𝑔(𝑤)𝑇, where Φ = [ϕ1, …, ϕr ] contains the spatial DMD modes, 𝑤 = (𝑤1, … , 𝑤𝑟 ) 𝑇 gives the projection weights and the temporal matrix 𝑇 is built from exponentials 𝑒 𝑖𝜔𝑖 𝑡 . In this decomposition, the spatial modes 𝜙j represent coherent structures in space, including extended waves with characteristic momenta and localized modes with finite confinement lengths, where the complex frequencies 𝜔𝑗 determine the temporal evolution of each mode, including oscillation and decay or growth.

[30] C. Eckart and G. Young, The approximation of one matrix by another of lower rank Psychometrika 1, 211 (1936). p. 2
Where the paper says it

DMD approximates complex spatiotemporal data by decomposing them into spatial modes, modal amplitudes, and temporal dynamics. Given a sequence of snapshots 𝑥(𝑡𝑘 ), we form the data matrix 𝑋 = [𝑥(𝑡1) 𝑥(𝑡2) ⋯ 𝑥(𝑡𝑚)], and seek a low rank-r approximation of the form 𝑋 ≈ Φ 𝑑𝑖𝑎𝑔(𝑤)𝑇, where Φ = [ϕ1, …, ϕr ] contains the spatial DMD modes, 𝑤 = (𝑤1, … , 𝑤𝑟 ) 𝑇 gives the projection weights and the temporal matrix 𝑇 is built from exponentials 𝑒 𝑖𝜔𝑖 𝑡 .

[31] J. Yin, Y. Chan, F. H da Jornada, D Y Qiu, C Yang, and S G Louie Analyzing and predicting non-equilibrium many-body dynamics via dynamic mode decomposition J Comput Phys 477, 111909 (2023). p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

[32] Y. Zhu, J. Yin, C C Reeves, C Yang, and V Vlček Predicting nonequilibrium Green’s function dynamics and photoemission spectra via nonlinear integral operator learning Mach Learn Sci Technol 6, 015027 (2025). p. 0
Where the paper says it

1 Data-driven reconstruction of band dispersion and quantum geometry via Koopman dynamical mode decomposition Yiming Pan1* , Jinze He1 , Jiapeng Yang1 , Zhiwei Fan2 1 State Key Laboratory of Quantum Functional Materials, School of Physical Science and Technology and Center for Transformative Science, ShanghaiTech University, Shanghai 200031, China 2 School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK Abstract We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables.

[33] Y. Pan and B Wang Time-crystalline phases and period-doubling oscillations in onedimensional Floquet topological insulators Phys Rev Res 2, 043239 (2020). p. 7
Where the paper says it

Another practical approach is to infer topology from dynamical observables whose long-time behavior is known to reflect topological invariants. In onedimensional chiral systems, for instance, the mean chiral displacement converges to the Zak phase and thus provides a dynamical signature of topology without direct access to Bloch-state phases.

[34] Q. Cheng, Y. Pan, H Wang, C Zhang, D Yu, A Gover, H Zhang, T Li, L Zhou, and S Zhu Observation of anomalous π modes in photonic Floquet engineering Phys Rev Lett 122, 173901 (2019). p. 1
Where the paper says it

In solid-state physics, for example, bandstructure engineering modifies semiconductor bandgaps to regulate conductivity and optical response, enabling devices such as transistors, laser diodes, and high-efficiency solar cells. In photonic crystals (PhCs), it controls light propagation and confinement through periodic dielectric structures [4,5], producing photonic bandgaps and engineered dispersion for applications such as high-reflectivity mirrors, PhC fibers and optical cavities.

[35] F. D. M. Haldane Model for a quantum Hall effect without Landau levels Condensedmatter realization of the parity anomaly Phys Rev Lett 61, 2015 (1988). p. 7
Where the paper says it

Although graphene has zero total Chern number with time-reversal symmetry breaking, each Dirac valley still carries a nontrivial Berry phase, underlying its quantum Hall effect. We will discuss the band topology of Haldane model [35] and graphene [36] in the following sections.

[36] A. H Castro Neto, F Guinea, N M R Peres, K S Novoselov, and A K Geim The electronic properties of graphene Rev Mod Phys 81, 109 (2009). p. 1
Where the paper says it

The Floquet–Bloch theorem is widely used to compute band structure and identify band modes, defect states within gaps, and group-velocity dispersion (GVD) in periodic media. Here we focus on electronic and photonic systems, for which the band structure – that is, the energy-momentum relation ε𝑛 (𝑘) – is central to understanding the properties of solids and dielectrics.

[37] T Fukui, Y Hatsugai, and H Suzuki Chern numbers in discretized Brillouin zone Efficient method of computing J Physical Soc Japan 74, 1674 (2005). p. 7
Where the paper says it

For instance, the Zak phase can be evaluated using the gauge-invariant discretized formula γ𝑍𝑎𝑘 = − Im ln∏⟨ 𝑢𝑘𝑗 𝐷𝑀𝐷 | 𝑢𝑘𝑗+1 𝐷𝑀𝐷 ⟩ 𝑁 𝑗=1 , (9) Similarly, the Berry flux through each plaquette is obtained from Wilson-loop overlap products, and summation over the discretized Brillouin zone yields the Chern number. This can be implemented using the Fukui–Hatsugai–Suzuki (FHS) construction [37], in which the link variable 𝑈𝛿 (k) = ⟨ 𝑢(𝑘) | 𝑢(𝑘 + 𝛿) ⟩ |⟨ 𝑢(𝑘) | 𝑢(𝑘 + 𝛿) ⟩| , (10) removes the arbitrary 𝑈(1) phase of independently extracted DMD modes.

[38] J. P. Provost and G Vallee Riemannian structure on manifolds of quantum states Commun Math Phys 76, 289 (1980). p. 1
Where the paper says it

Without prior knowledge of the equations of motion or the detailed system parameters, Koopman–DMD enables the direct extraction of Floquet–Bloch-like extended modes, as well as localized modes, from state data, and may further support reconstruction of an effective Hamiltonian and its associated band structure. The extracted DMD modes can also be used to infer phase transition, such as the Anderson transition, as well as band topology and quantum geometry, including Chern numbers, topological edge states, Berry curvature and the quantum metric.

[39] K v Klitzing, G Dorda, and M Pepper New method for high-accuracy determination of the fine-structure constant based on quantized Hall resistance Phys Rev Lett 45, 494 (1980). [40] D J Thouless, M Kohmoto, M P Nightingale, and M den Nijs Quantized Hall conductance in a two-dimensional periodic potential Phys Rev Lett 49, 405 (1982). p. 7
Where the paper says it

In two dimensions, the corresponding invariant is often the Chern number, 𝐶 = 1 2𝜋 ∬ Ω(𝑘𝑥, 𝑘𝑦) BZ 𝑑𝑘𝑥𝑑𝑘𝑦, (8) where Ω = ∇k × 𝒜(𝑘) is the Berry curvature. Although graphene has zero total Chern number with time-reversal symmetry breaking, each Dirac valley still carries a nontrivial Berry phase, underlying its quantum Hall effect.

[41] M Segev, Y Silberberg, and D N Christodoulides Anderson localization of light Nat Photonics 7, 197 (2013). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[42] P W Anderson, Absence of Diffusion in Certain Random Lattices Physical Review 109, 1492 (1958). [43] R Bott, An application of the Morse theory to the topology of Lie-groups Bulletin de La Société Mathématique de France 84, 251 (1956). [44] M Di Stasio and X Zotos Connection between low energy effective hamiltonians and energy level statistics Phys Rev Lett 74, 2050 (1995). p. 3
Where the paper says it

The Berry connection is 𝐴𝑛𝑚(𝑘) = 𝑖⟨𝑢𝑛,𝑘 |∇𝑘 |𝑢𝑚,𝑘 ⟩ [21], the Berry phase is obtained by integrating the diagonal Berry connection along a closed loop in momentum space, and quantum geometric tensor can be further defined accordingly [22–26]. Thirdly, for interacting or many-body systems, one often introduces Green’s functions within a mean-field or self-energy framework, 𝐺(ω, 𝑘) = (ω − 𝐻(𝑘) − Σ(ω, 𝑘)) −1 from which the spectral function, local density of states, and quasiparticle lifetime can be derived.

[45] N C Murphy, R Wortis, and W A Atkinson Generalized inverse participation ratio as a possible measure of localization for interacting systems Physical Review B—Condensed Matter and Materials Physics 83, 184206 (2011). [46] W.-P. Su, J R Schrieffer, and A J Heeger Solitons in polyacetylene Phys Rev Lett 42, 1698 (1979). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[47] S Aubry and G André Analyticity breaking and Anderson localization in incommensurate lattices Ann Israel Phys Soc 3, 18 (1980). p. 8
Where the paper says it

It enables reconstruction not only of topological invariants but also of the quantum geometric tensors of the data-driven band structure. Anderson localization and phase transition.

[48] P Harper, Pg Harper, Proc Phys Soc London Sect. a 68, 874 (1955), in Proc. Phys Soc London Sect. A, Vol. 68 (1955), p. 874. [49] B Wang, J Quan, J Han, X Shen, H Wu, and Y Pan Observation of photonic topological Floquet time crystals Laser Photon Rev 16, 2100469 (2022). p. 1
Where the paper says it

In solid-state physics, for example, bandstructure engineering modifies semiconductor bandgaps to regulate conductivity and optical response, enabling devices such as transistors, laser diodes, and high-efficiency solar cells. In photonic crystals (PhCs), it controls light propagation and confinement through periodic dielectric structures [4,5], producing photonic bandgaps and engineered dispersion for applications such as high-reflectivity mirrors, PhC fibers and optical cavities.

[50] M S Rudner, N H Lindner, E Berg, and M Levin Anomalous edge states and the bulkedge correspondence for periodically driven two-dimensional systems Phys Rev X 3, 031005 (2013). p. 2
Where the paper says it

3 disordered, periodically-driven, non-Hermitian, nonlinear, and many-body interacting systems from data, particularly through the identification of coherent oscillatory modes and spatial structures. In this paper, we establish a theoretical connection between Koopman–DMD analysis and band structures obtained from the Floquet–Bloch formalism, and support this connection with numerical demonstrations in prototypical one- and two-dimensional lattice models.

[51] X Zhang, T Zhang, M.-H. Lu, and Y.-F. Chen A review on non-Hermitian skin effect Adv Phys X 7, 2109431 (2022). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[52] N Hatano and D R Nelson Localization transitions in non-Hermitian quantum mechanics Phys Rev Lett 77, 570 (1996). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[53] C M Bender and S Boettcher Real spectra in non-Hermitian Hamiltonians having P T symmetry Phys Rev Lett 80, 5243 (1998). p. 4
Where the paper says it

In non-Hermitian or dissipative systems, nonzero γ𝑗 measures modal amplification or decay. The spatial profile 𝜙𝑗 (𝑥) gives the corresponding mode shape in real or configuration space.

[54] S Mandal and S Kar Topology and Localizations in a 2D Su-Schrieffer-Heeger Model with Domain Walls Quasi-periodic Disorder and Periodic Hopping Modulations ArXiv Preprint ArXiv:2506. p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

17786 (2025). [55] B Xie, H.-X. Wang, X Zhang, P Zhan, J.-H Jiang, M Lu, and Y Chen Higher-order band topology Nature Reviews Physics 3, 520 (2021). p. 5
Where the paper says it

As a result, observable-driven DMD often requires multiple initial conditions or repeated measurements to reconstruct the full band structure and its topology reliably. Numerically, DMD in the Schrödinger picture is conceptually cleaner and provides the most direct access to band physics when full state data are available.

[56] C-A Li Topological states in two-dimensional Su-Schrieffer-Heeger models Front Phys 10, 861242 (2022). p. 0
Where the paper says it

Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

[57] D Leykam, A Andreanov, and S Flach Artificial flat band systems: from lattice models to experiments Adv Phys X 3, 1473052 (2018). p. 2
Where the paper says it

3 disordered, periodically-driven, non-Hermitian, nonlinear, and many-body interacting systems from data, particularly through the identification of coherent oscillatory modes and spatial structures. In this paper, we establish a theoretical connection between Koopman–DMD analysis and band structures obtained from the Floquet–Bloch formalism, and support this connection with numerical demonstrations in prototypical one- and two-dimensional lattice models.

[58] D Di Sante, T Neupert, G Sangiovanni, R Thomale, R Comin J G Checkelsky I Zeljkovic and S D Wilson Kagome metals Rev Mod Phys 98, 015002 (2026). p. 7
Where the paper says it

For a sufficiently smooth family of DMD bulk modes |𝑢 𝐷𝑀𝐷(𝑘𝑗)⟩, discrete Berry phases can be computed directly from overlap products. For instance, the Zak phase can be evaluated using the gauge-invariant discretized formula γ𝑍𝑎𝑘 = − Im ln∏⟨ 𝑢𝑘𝑗 𝐷𝑀𝐷 | 𝑢𝑘𝑗+1 𝐷𝑀𝐷 ⟩ 𝑁 𝑗=1 , (9) Similarly, the Berry flux through each plaquette is obtained from Wilson-loop overlap products, and summation over the discretized Brillouin zone yields the Chern number.

[59] C.-Z. Chang, C.-X. Liu, and A H MacDonald Colloquium: quantum anomalous Hall effect Rev Mod Phys 95, 011002 (2023). p. 7
Where the paper says it

In two dimensions, the corresponding invariant is often the Chern number, 𝐶 = 1 2𝜋 ∬ Ω(𝑘𝑥, 𝑘𝑦) BZ 𝑑𝑘𝑥𝑑𝑘𝑦, (8) where Ω = ∇k × 𝒜(𝑘) is the Berry curvature. Although graphene has zero total Chern number with time-reversal symmetry breaking, each Dirac valley still carries a nontrivial Berry phase, underlying its quantum Hall effect.

[60] W Jiang, M Kang, H Huang, H Xu, T Low, and F Liu Topological band evolution between Lieb and kagome lattices Phys Rev B 99, 125131 (2019). p. 2
Where the paper says it

Given a sequence of snapshots 𝑥(𝑡𝑘 ), we form the data matrix 𝑋 = [𝑥(𝑡1) 𝑥(𝑡2) ⋯ 𝑥(𝑡𝑚)], and seek a low rank-r approximation of the form 𝑋 ≈ Φ 𝑑𝑖𝑎𝑔(𝑤)𝑇, where Φ = [ϕ1, …, ϕr ] contains the spatial DMD modes, 𝑤 = (𝑤1, … , 𝑤𝑟 ) 𝑇 gives the projection weights and the temporal matrix 𝑇 is built from exponentials 𝑒 𝑖𝜔𝑖 𝑡 . In this decomposition, the spatial modes 𝜙j represent coherent structures in space, including extended waves with characteristic momenta and localized modes with finite confinement lengths, where the complex frequencies 𝜔𝑗 determine the temporal evolution of each mode, including oscillation and decay or growth.

[61] https://en.wikipedia.org/wiki/Madelung equations. p. 1
Where the paper says it

To address these challenges, data-driven approaches have been increasingly important in modern physics. Rather than relying on prior knowledge of governing equations [11], this paradigm starts directly from spatiotemporal data generated by experiments or simulations to uncover latent physical structure.

--- Page 20 ---

Figures: Figure 1 Complementary paradigms for analyzing spatiotemporal periodic systems. A schematic comparison between the traditional equation-based framework and the data-driven approach <ref:2605. p. 1

Where the paper says it

While techniques such as physics-informed neural networks or symbolic regression excel at discovering explicit governing equations, Koopman operator theory [12–15] and dynamic mode decomposition (DMD) [15,16] provide a particularly natural, equation-free bridge between data and physics by linearly embedding the nonlinear dynamics [17]. The conventional equation-based Floquet–Bloch decomposition can, in principle, be complemented by a data-driven Koopman–DMD decomposition performed directly on spatiotemporal observables.

06199#pg5> Left: The Hamiltonian-driven paradigm relies on the Floquet–Bloch theorem to analytically derive band structures, topological invariants, and mean-field properties from an explicit time-periodic Hamiltonian. p. 6
Where the paper says it

Within Hamiltonian Floquet–Bloch decomposition (FBD), band dispersion is obtained by first specifying the Hamiltonian 𝐻, or 𝐻(𝑡) in the periodically driven case. For a static periodic lattice, Bloch’s theorem gives 𝜓𝑛𝒌 (𝒓) = 𝑒 𝑖𝒌⋅𝒓𝑢𝑛𝒌 (𝒓), where 𝒌 is the crystal momentum and 𝑛 labels the band.

Right: The data-driven paradigm utilizes Koopman operator theory and Dynamic Mode Decomposition (DMD) to extract equivalent Floquet-Bloch-like modes, topological phases, and underlying classical trajectories directly from time-resolved observables (e. p. 1
Where the paper says it

While techniques such as physics-informed neural networks or symbolic regression excel at discovering explicit governing equations, Koopman operator theory [12–15] and dynamic mode decomposition (DMD) [15,16] provide a particularly natural, equation-free bridge between data and physics by linearly embedding the nonlinear dynamics [17]. The conventional equation-based Floquet–Bloch decomposition can, in principle, be complemented by a data-driven Koopman–DMD decomposition performed directly on spatiotemporal observables.

g., wavefunctions, densities, and correlations) without requiring prior knowledge of the governing equations. p. 4
Where the paper says it

For localized modes, by contrast, a sharp momentum is generally ill-defined, and localization is better characterized by a localization length or inverse participation ratio (IPR). In this way, DMD extracts the frequency spectrum, decay (or growth) rate, spatial mode profile, and projection weight directly from data, without prior knowledge of the underlying governing equations.

Together, these two paradigms provide a mutually reinforcing framework that bridges rigorous theoretical modeling and mode-resolved inference from experimental data <ref:2605.06199#pg5>

Figure 2 DMD analysis of the Anderson model and the crossover to localization. (a) Spatiotemporal evolution data seeded from the random. p. 4

Where the paper says it

Dynamic mode decomposition (DMD) provides a practical finite-data realization of Koopman spectral analysis. Given a sequence of spatiotemporal snapshots, such as wavefunctions 𝜓(𝑥,𝑡𝑛 ), DMD seeks a best-fit linear evolution operator 𝐴 satisfying 𝜓(𝑡𝑛+1 ) ≈ 𝐴 𝜓(𝑡𝑛 ).

(b) Band structure and spectral weights extracted by DMD. p. 0
Where the paper says it

This framework establishes a correspondence between Hamiltonian Floquet-Bloch decomposition and Koopman-DMD, whereby the extracted DMD modes encode frequencies, decay or growth rates, spatial profiles and projection weights. These quantities allow the reconstruction of spectral functions, local density of states, and delocalized-to-localized measures such as the inverse participation ratio.

The dashed curves denote the exact dispersion. p. 1
Where the paper says it

In practice, however, this strategy faces several limitations. In many systems, including strongly-correlated electron systems and nonlinear photonic crystals, the exact Hamiltonian may be unknown or only partially constrained.

(c, d) Representative spatial profiles of the DMD modes in the weak- and strong-disorder regimes, showing extended and localized characteristics, respectively. p. 7
Where the paper says it

More generally, zero-energy localized edge states or systematic sublattice polarization in the extracted spatial modes can provide strong evidence for nontrivial bulk topology through bulk– boundary correspondence. For a sufficiently smooth family of DMD bulk modes |𝑢 𝐷𝑀𝐷(𝑘𝑗)⟩, discrete Berry phases can be computed directly from overlap products.

(e) Distribution of the extracted modes in the energy–IPR plane under varying disorder strengths. p. 9
Where the paper says it

However, exact diagonalization rapidly becomes computationally expensive as system size grows. For Koopman–DMD, one may instead examine the frequency distribution and spatial support of localized DMD modes extracted from experimentally or numerically accessible observables.

(f) The DMD-extracted localization length decreases monotonically as the disorder strengthens. p. 4
Where the paper says it

For localized modes, by contrast, a sharp momentum is generally ill-defined, and localization is better characterized by a localization length or inverse participation ratio (IPR). In this way, DMD extracts the frequency spectrum, decay (or growth) rate, spatial mode profile, and projection weight directly from data, without prior knowledge of the underlying governing equations.

(g, h) Level-spacing statistics obtained from the DMD spectrum in the weak- and strong-disorder regimes, showing a transition from Wigner–Dyson to Poisson distributions <ref:2605. p. 9
Where the paper says it

Its main strength is the direct extraction of edge or defect spectral modes from individual samples, whereas global topological invariants are generally less directly accessible. Notably, for disordered many-body systems, exact diagonalization is often used to distinguish localized and thermal phases through level-spacing statistics, such as Poisson versus Wigner– Dyson distributions [44].

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can reconstruct band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables, rather than deriving spectra from an explicit Hamiltonian. This allows for a data-driven reconstruction of band dispersion and modal dynamics that are independent of prior knowledge of governing equations.

  2. Improved AI can infer quantum-geometric properties such as the quantum metric, Berry curvature, and geometric phases directly from the extracted DMD modes. This capability enables the inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases.

  3. Improved AI can perform a unified route for analyzing wave propagation, localization, and topological phases in condensed matter systems across disordered, periodically driven, non-Hermitian models. The system can directly capture from data, the breakdown of Floquet driven topological phases into Anderson localization by tracking modal quantities like Center of Mass and Inverse Participation Ratio.

  4. Improved AI can diagnose the type of physical regime (topological vs. Anderson localization) by analyzing the distribution of DMD modes in the energy inverse participation ratio plane, which sharply distinguishes extended and localized regimes.

  5. Improved AI can distinguish between different physical regimes in driven non-Hermitian systems by analyzing the Center of Mass (COM) distribution of DMD modes, which clearly distinguishes topological edge pinning, NHSE-induced boundary accumulation, and random Anderson localization.

  6. Improved AI can reconstruct effective band structures from finite-size measurements to infer bulk dispersion relations. This allows for the inference of effective dispersion relation from measured data in 2D systems like graphene without requiring exact Hamiltonian diagonalization.

  7. Improved AI can distinguish between gapless Dirac semimetals and topological Chern insulators by analyzing reconstructed band structures and Berry curvature, as DMD can directly distinguish a gapless Dirac semimetal from a topological Chern insulator.

  8. Improved AI can reconstruct the quantum metric and Berry curvature of extracted DMD modes using gauge-invariant discretized formulas derived from link variables, providing access to the quantum geometric tensors of the data-driven band structure.

Abstract

We present a data-driven framework for reconstructing band structures using Koopman operator analysis and dynamic mode decomposition (Koopman-DMD). Instead of deriving spectra from an explicit Hamiltonian, the approach reconstructs band dispersion and modal dynamics directly from spatiotemporal data, including wavefunctions and observables. This framework establishes a correspondence between Hamiltonian Floquet-Bloch decomposition and Koopman-DMD, whereby the extracted DMD modes encode frequencies, decay or growth rates, spatial profiles and projection weights. These quantities allow the reconstruction of spectral functions, local density of states, and delocalized-to-localized measures such as the inverse participation ratio. Also, these extended DMD modes enable inference of quantum-geometric and topological properties, including the quantum metric, Berry curvature and geometric phases. Applications to prototypical one- and two-dimensional tight-binding models, including disordered Su-Schrieffer-Heeger model and its Floquet and non-Hermitian variants, graphene and Haldane models, demonstrate that Koopman-DMD provides a unified route for the data-driven analysis of wave propagation, localization, and topological phases in condensed matter, photonics, and related fields.

Sources

Related papers