Particle seismology: mechanical and gravitational properties from parton-hadron duality

arXiv:2604.26537 · hep-ph, hep-lat, nucl-th · Submitted 2026-04-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "Particle seismology: mechanical and gravitational properties from parton-hadron duality".

Paper summary: Kai: So this paper, "Particle seismology: mechanical and gravitational properties from parton-hadron duality", is trying to use parton-hadron duality to get insights into the matter distribution inside hadrons by looking at the stress energy momentum tensor matrix elements.

Mira: The main thesis is that these stress energy momentum tensor matrix elements provide a way to gain insight into matter distribution through gravitational form factors, which are accessible experimentally through low momentum transfers.

Lev: They use this connection because classical particles are point like things, and their density at a point x zero is just a simple delta function.

Kai: The paper sets up the stress energy momentum tensor as a universally conserved quantity that provides the gravitational form factors from which mechanical properties may be derived via the response to space time fluctuations.

Mira: They build on this by defining how this tensor relates to the canonical stress energy momentum tensor in field theory, and they focus on how only symmetric components of that symmetric stress energy momentum tensor become observable in both curved space time and flat space.

Lev: This framework is crucial because it allows them to move from the abstract idea of mechanical properties without explicitly using gravitons.

Kai: Then they define the gravitational form factors for scalars via the decomposition of that tensor, where D of q squared is the Druck term.

Lev: This leads into dispersion relations and sum rules which impose important mathematical constraints on these form factors based on analyticity in the momentum transfer variable extended to the complex plane.

Kai: They show that for D of t, there are unsubtracted dispersion relations that relate D of t to an integral over the spectral function Im D s.

Mira: And this spectral function itself corresponds to a virtual gravitational hadronantihadron production in the scalar zero plus and tensor two plus quantum number channels.

Lev: The paper connects these concepts by showing how transverse energy density is defined, which involves a factor of q over b squared times the Druck term D of q squared.

Kai: They then decompose the pressure using this transverse energy density to reflect a hierarchy of masses where the contribution from theta is attractive and long range, reflecting the smallness of sigma mass.

Mira: So it's basically saying that these gravitational form factors give us information about the matter distribution inside hadrons, specifically their mass and forces.

Lev: And they use lattice QCD data for pion and nucleon to provide high accuracy gravitational form factors in the intermediate space like region up to Q two squared equal two GeV squared.

Conclusion: Kai: So looking at the paper, "Particle seismology: mechanical and gravitational properties from parton-hadron duality", it seems like the authors are trying to show that mechanical and gravitational properties are deeply connected through this duality.

Mira: They're arguing that this connection is mediated by these stress energy momentum tensor matrix elements which link to gravitational form factors, which we can measure with low momentum transfers.

Lev: What this means in simpler terms is that instead of searching for explicit gravitons, we use the properties of the matter itself to infer how matter is distributed gravitationally.

Kai: It suggests that these internal structure—like mass and forces—is characterized by these form factors, and those form factors are what truly characterize the hadron.

Mira: And they point out that their findings on things like transverse distributions give us a hierarchy between different mass scales in the system, which is tied to the meson mass pattern.

Lev: From an experimental standpoint, this means we have concrete predictions based on these constraints that match what lattice QCD has measured for pions and nucleons up to Q two squared equal two GeV squared.

Kai: So it connects the abstract theory directly to some of the most precise calculations we have in nuclear physics and particle physics.

Mira: It really frames how we understand the structure of these objects, suggesting that this framework is a useful tool for understanding how matter behaves under gravity at small scales.

Departamento de Fósica Atłmica, Molecular y Nuclear and Instituto Carlos I de Fósica Teoricca y Computacional · The H. Niewodniczałnski Institute of Nuclear Physics, Polish Academy of Sciences

hep-ph, hep-lat, nucl-th

Submitted: 2026-04-29

Updated: 2026-11-17

Importance score: 79/100

The gist: Particle seismology: mechanical and gravitational properties from parton-hadron duality shows that stress-energy-momentum tensor matrix elements provide insight into the matter distribution inside…

Key concepts

Stress-Energy-Momentum Tensor
This is a conserved quantity in physics that describes how energy and momentum are distributed in spacetime. In this context, it provides the mathematical framework to derive mechanical properties like pressure densities by responding to fluctuations in space-time.
Gravitational Form Factors (GFFs)
These factors describe how the stress-energy tensor decomposes, revealing gravitational properties of hadrons. The value D(0) is a fundamental gravitational property that cannot be found through standard hadronic symmetry alone, offering unique insight into the internal matter distribution.
Parton-Hadron Duality
This concept links the description of quarks and gluons (partons) to the observable properties of hadrons. It allows physicists to use calculations based on fundamental QCD principles to predict measurable characteristics of composite particles like protons and pions.

Terminology

Summary

Particle seismology: mechanical and gravitational properties from parton-hadron duality shows that stress-energy-momentum tensor matrix elements provide insight into the matter distribution inside hadrons through gravitational form factors, which are accessible experimentally via low momentum transfers. p. 0

Introduction to Hadronic Properties

Hadrons are extended quantum objects which feel the strong interaction and have a variety of properties such as mass, spin, charge, radii, magnetic moments, etc., which ultimately characterize them. p. 2 The finite extension suggests that these properties correspond to integrated extended distributions which are not homogeneous or isotropic. p. 2 Determining the mechanical and gravitational properties of hadrons, such as mass, momentum, or pressure densities, without explicitly using gravitons is a central question. p. 3

Stress-Energy-Momentum Tensor Primer

The stress-energy-momentum tensor is a universally conserved quantity providing the gravitational form factors from which mechanical properties may be derived via the response to space-time fluctuations. Classical particles are characterized as being point like, meaning the density or concentration of a particle located at point x0 is just a simple Dirac delta function. p. 7 The energy density is naturally defined as H(x, t) = X i 1/2 m d 2xi dt squared + V(x)n(x, t). p. 8

Relativistic Field Theory Framework

In field theory, the canonical SEM amounts to the conserved Noether current corresponding to the symmetry under space-time translations. The symmetric SEM is defined as a functional variation of the action and only the symmetric components become observable in both curved spacetime and flat space.

Gravitational Form Factors in QCD

The gravitational form factors for scalars are defined via the decomposition of the SEM tensor, where D(q 2) is the Druck term. The value D(0) is a gravitational property of the hadron that cannot be deduced from hadronic symmetry and it is finite and unambiguous. p. 6

Dispersion Relations and Sum Rules

Form factors obey important mathematical constraints based on analyticity in the momentum transfer variable extended to the complex plane. The unsubtracted dispersion relation for D(t) is D(t) = 1/π Z ∞ s0 ds ImD(s) s - t =⇒ D(0) = 1/π Z ∞ s0 ds ImD(s) s. p. 6 The spectral function Im D(s) corresponds to a virtual gravitational hadronantihadron production g∗ → HH¯ in the scalar 0++ and tensor 2++ quantum number channels. p. 6

Transverse Distributions and Mechanical Properties

The transverse energy density is defined as Θ+−(b) = Z d 2q⊥ squared e(-iq⊥·b) 1/2 h q i⊥q j⊥ − δ i j q 2⊥ i D(q 2⊥). The decomposition of the pressure as p(b) = mN 6 A(b) + 1/24mN∇2 bB(b) − 1/6 Θ(b) reflects a hierarchy of masses where the contribution of Θ is attractive and long range, reflecting the smallness of the σ mass. p. 2

Summary of Findings

The gravitational form factors provide insight into the matter distribution inside hadrons, in particular the mass and forces. The MIT lattice benchmark data provide high accuracy gravitational form factors for the pion and nucleon directly in the “intermediate” space-like region up to Q2 = 2 GeV squared, which are fully compatible with the meson dominance approach. p. 3 It is important to carry out the form factor analysis in good spin channels. p. 6 The matter extension (radius) is large due to the small value of the σ meson mass, mσ = 0.64(4) GeV. The form factor D(t) (the Druck term) is a combination of the good spin form factors, 0++ and 2++, with the meson dominance applied. p. 6

Conclusion on Incompleteness

The incompleteness problem for GFFs revisited suggests that while rigorous approaches like Roy equations are appealing, the superconvergence sum rules are broken to a large extent. The analysis of the BaBar data shows a mismatch in the charge sum rule, and pQCD extrapolation down to smax yields only about a fifth of the needed magnitude in the superconvergence sum rule. p. 4

Transverse Distributions Interpretation

The light-front 2D transverse viewpoint is by definition Lorentz invariant and can be regarded as a genuinely intrinsic hadron property. The transverse charge density is invariant under longitudinal boosts, and the transverse energy density does not possess definite positivity. p. 7

Wave Packets on the Light Front

The coordinate and momentum representations are related via the Fourier transform, which allows one to define the transverse wave packet distribution in the transverse coordinate. The expectation value of the electromagnetic current J+ is given by ⟨ψ Z dx- J+(b, x-)ψ⟩ → F(b). p. 4

Final Summary of GFF Behavior

The signs of the low- and high values of the arguments for Im A(s) + 2π changes sign − pQCD, Im D(s) − changes sign + and Im Θ(s) + changes sign −. The main general features of GFFs of the pion and nucleon are collected in Tables 2 and 3. p. 2 The low limit for Im A(s) + 2π is sym. p. 6, while the high limit for Im Θ(b) is +. p. 1 The low limit for Im D(s) - changes sign, and the high limit for Im Θ(s) + changes sign. p. 5 The low limit for A(-Q2) is 1 sym. p. 1, while the high limit for D(-Q2) is −1 + O(m 2 π). p. 1 The transverse radii hierarchy reflects the meson mass pattern: ⟨b 2⟩ A < ⟨b 2⟩ mech < ⟨b 2⟩ Θ. p. 2

References

[1] E.E. Chambers and R. Hofstadter, Phys. p. 2 Rev. 103 (1956) 1454.

[2] E.B. Hughes et al., Phys. Rev. 139 (1965) B458.

[3] R.P. Feynman, Acta Phys. Polon. 24 (1963) 697.

[4] B.S. DeWitt, Phys. Rev. 162 (1967) 1239.

[5] J.F. Donoghue, Phys. Rev. D 50 (1994) 3874.

[6] L. Buoninfante et al., (2024), 2412.08696.

[7] I.Y. Kobzarev and L.B. Okun, Zh. Eksp. Teor. Fiz. 43 (1962) 1904.

[8] D.H. Sharp and W.G. Wagner, Physical Review 131 (1963) 2226. p. 4

[9] H. Pagels, Phys. Rev. 144 (1966) 1250.

[10] K. Raman, Phys. Rev. D 4 (1971) 476.

[11] M.G. Hare and G. Papini, Can. J. Phys. 50 (1972) 1163.

[12] T.N. Truong and R.S. Willey, Phys. Rev. D40 (1989) 3635.

[13] J. Gasser and U.G. Meissner, Nucl. Phys. B 357 (1991) 90.

[14] J.F. Donoghue and H. Leutwyler, Z. Phys. C 52 (1991) 343.

[15] X.D. Ji, Phys. Rev. Lett. 74 (1995) 1071.

[16] X.D. Ji, Phys. Rev. D 55 (1997) 7114.

[17] M.V. Polyakov and C. Weiss, Phys. Rev. D 60 (1999) 114017.

[18] M.V. Polyakov, Phys. Lett. B 555 (2003) 57.

[19] M.V. Polyakov and P. Schweitzer, Int. J. Mod. Phys. A 33 (2018) 1830025, 1805.

[20] D.C. Hackett, D.A. Pefkou and P.E Shanahan, (2023), 2310.08484.

[21] D.C Hackett et al., Phys. Rev. D 108 (2023) 114504, 2307.11707.

[22] D. Brommel, Pion Structure from the Lattice, PhD thesis, Regensburg U. p. 0, 2007.

[23] QCDSF, UKQCD, D. Br¨ommel et al., Phys. Rev. Lett. 101 (2008) 122001, 0708.

[24] J. Delmar et al., 40th International Symposium on Lattice Field Theory, 24, 2401. p. 10408.

[25] P.E Shanahan and W. Detmold, Phys. Rev. D 99 (2019) 014511, 1810.

[26] χQCD, B. Wang et al., Phys. Rev. D 109 (2024) 094504, 2401.

[27] Belle, M. Masuda et al., Phys. Rev. D 93 (2016) 032003, 1508.

[28] S. Kumano, Q.T Song and O.V Teryaev, Phys. Rev. D 97 (2018) 014020, 1711.

[29] CLAS, H. p. 3S Jo et al., Phys. Rev. Lett. 115 (2015) 212003, 1504.

[30] V.D Burkert, L. Elouadrhiri and F.X Girod, Nature 557 (2018) 396.

[31] GlueX, A. p. 3 Ali et al., Phys. Rev. Lett. 123 (2019) 072001, 1905.

[32] X.Y Wang, F Zeng and Q Wang, Phys. Rev. D 105 (2022) 096033, 2204.

[33] Y. Guo, F Yuan and W Zhao, (2025), 191. p. 0 p. 0

[34] D.E Kharzeev, Phys. Rev. D 104 (2021) 054015, 2102.

[35] MMGPDs, M Goharipour et al., (2025), 191.

[36] Q.T Song, O.V Teryaev and S. Yoshida, Phys. Lett. B 868 (2025) 139797, 2503. p. 0

[37] J. Han, B. Pire and Q.T Song, Phys. Rev. D 112 (2025) 014048, 2506. p. 0

[38] J. Han, B. Pire and Q.T Song, Phys. Rev. D 113 (2026) 014027, 2511. p. 0

[39] H. Alharazin and J.Y Panteleeva, (2026), 2602. p. 019.

[40] Y. Hatta and J. Schoenleber, Phys. Rev. Lett. 134 (2025) 251901, 2502. p. 0

[41] W Broniowski, E Ruiz Arriola and K Golec-Biernat, Phys. p. 0 Rev. D 77 (2008) 034023, 0712.

[42] W Broniowski and E Ruiz Arriola, Phys. p. 0 Rev. D 78 (2008) 094011, 0809.

[43] T. Frederico et al., Phys. Rev. D 80 (2019) 054.

[44] P Masjuan, E Ruiz Arriola and W Broniowski, Phys. p. 0 Rev. D 87 (2013) 014.

[45] C Fanelli et al., Eur. Phys. J. C 76 (2016) 253, 1603.

[46] A Freese and I.C Clo¨et, Phys. Rev. C 100 (2019) 0152. p. 7

[47] AF Krutov and V.E Troitsky, Phys. Rev. D 103 (2021) 014.

[48] Z Xing, M Ding and L Chang, Phys. Rev. D 107 (2023) L0315.

[49] YZ Xu et al., Eur. Phys. J. C 84 (2024) 191, 2311.

[50] Y Li and J.P Vary, Phys. Rev. D 109 (2024) L051.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI systems can perform gravitational form factor analysis by directly relating them to generalized parton distributions as low momentum transfers, which makes them accessible experimentally. This allows for a more direct connection between theoretical predictions and experimental observables.

  2. The system can accurately model hadronic structure using lattice QCD benchmark data, which are stated to provide high accuracy gravitational form factors for the pion and nucleon directly in the intermediate space-like region up to Q2 = 2 GeV2.

  3. The AI can utilize the meson dominance approach to efficiently describe transverse distributions at not too small transverse radii, such as "b >= 0.1 fm, providing a simple picture where the attractive part comes from Theta, while the repulsive part from A."

  4. The system can implement an energy-weighted theorems by showing that unitarity follows from energy conservation in cases like the Schrödinger and neutral scalar fields, which is described as SEM being ubiquitous and central quantity.

  5. The AI can analyze the spectral properties of form factors using dispersion relations to constrain their behavior, noting that for the pion vector form factor, "ImF(s) = F(s)sin delta11(s) > 0, 4m2π < s < 4m2K."

Sources

Related papers