Location-Aware Performance Analysis of HAPS-RIS-Assisted Multiple-Antenna Systems with Practical RIS Impairments
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.
Rosa: We're looking at the paper: "Location-Aware Performance Analysis of HAPS-RIS-Assisted Multiple-Antenna Systems with Practical RIS Impairments".
Dev: Here's the gist of the paper. The paper develops a tractable analytical framework for characterizing the received Signal-to-Noise Ratio (SNR) statistics of HAPS-RIS-MIMO systems under LoS-aligned precoding to provide practical design insights.
Rosa: Problem Motivation The received signal-to-noise ratio (SNR) statistics in a HAPS-RIS-MIMO system become difficult to characterize due to the cascaded Rician small-scale fading and log-normal large-scale shadowing effects.
Dev: To address this challenge, the paper develops a tractable analytical framework for the SNR characterization of HAPSRIS-MIMO systems under LoS-aligned precoding.
Rosa: The resulting cumulative distribution function (CDF) expression is then used to derive the outage probability (OP) and to extract practical design insights for HAPSRIS-assisted MIMO deployments.
Paper summary: Rosa: So, to recap what we just talked about, we've seen that this paper is focused on making sense of the received signal statistics for HAPS RIS MIMO systems when things get complicated due to cascaded fading and shadowing.
Dev: It’s about taking that complexity and building a mathematical tool—a tractable framework—specifically under LoS aligned precoding. They claim they can characterize the distribution of the received signal-to noise ratio effectively using saddlepoint approximation for the small-scale power and Gauss–Hermite quadrature for the large-scale log-normal effect.
Taro: The main point they are pushing is that this framework allows them to derive an outage probability expression, which is how often a connection fails, and then use that to extract real design insights.
Rosa: It’s important because it tackles the difficulty of characterizing these systems without giving you just some abstract noise measurements; it gives you a way to predict performance. They are analyzing multiple transmit antennas at the HAPS and single antennas for users, which is a specific realization of RIS-assisted MIMO communications.
Dev: And they focus on the fact that aerial-to-ground links usually follow Rician fading because of LoS dominant propagation, so studying this under cascaded Rician channels is particularly relevant to HAPS RIS performance.
Taro: They also look at the analysis considering not just the ideal case, but also incorporating mum RIS amplitude response and practical parameters like minimum amplitude response and finite phase resolution into their model.
Rosa: That’s a big deal because they aren't just looking at a perfect theoretical channel; they are modeling what you’d actually find when you put hardware in the system.
Dev: They show that this detailed modeling leads to results where LoS aware RIS phase optimization provides substantial transmit power savings, and even with practical hardware limitations, we see additional gains.
Taro: So essentially, the paper claims that this framework is a way to move from abstract fading models to concrete design guidance for HAPS RIS MIMO systems by providing a way to calculate outage probability.
Rosa: And they conclude that LoS-aligned precoding can achieve performance very close to eigenmode precoding when the RIS phases are properly optimized, which points toward simpler control schemes.
Conclusion: Dev: So, looking at this Location-Aware Performance Analysis of HAPS-RIS-Assisted Multiple-Antenna Systems with Practical RIS Impairments, the authors have put forward a detailed analytical framework to handle the tricky SNR statistics.
Rosa: They’ve done that by combining saddlepoint approximation and Gauss–Hermite quadrature to model both the small and large scale fading effects effectively.
Taro: And they showed that this framework yields an outage probability expression, which is how often you have a bad connection, and then they use it to find practical design insights for HAPS RIS deployments.
Dev: The main implication is that we can now design systems with better transmit power efficiency by optimizing the RIS phases to enhance the LoS power contribution.
Rosa: And they also found that because of practical hardware constraints, we get extra gains when you combine optimized phase designs with those minimum amplitude responses and finite phase resolutions.
Taro: They also demonstrated that LoS-aligned precoding can perform nearly as well as eigenmode precoding when the RIS phases are properly tuned.
Dev: So, in the end, this paper offers a way to quantify the trade-offs involving system parameters like transmit power, HAPS altitude, and antenna numbers in these complex systems.
Tayfun Yilmaz, Haci Ilhan, Ali Gorcin, Halim Yanikomeroglu
Kocaeli University · Yildiz Technical University · Istanbul Technical University · Carleton University
eess.SP
Submitted: 2026-04-28
Updated: 2026-11-07
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 60/100
The gist: The paper develops a tractable analytical framework for characterizing the received Signal-to-Noise Ratio (SNR) statistics of HAPS-RIS-MIMO systems under LoS-aligned precoding to provide practical…
Key concepts
- Signal-to-Noise Ratio (SNR) Statistics
- This refers to how the quality of the received signal changes over time. In this paper, it's complicated by fading effects from the HAPS, the RIS, and shadowing. Characterizing these statistics is crucial because it tells designers how reliable the communication link will be.
- Saddlepoint Approximation (SPA)
- This is a mathematical technique used to simplify complex calculations involving distributions of channel power. It helps researchers find an approximate form for the distribution of small-scale effective channel power, making the analysis more manageable.
- Outage Probability (OP)
- The outage probability is the chance that the received signal quality falls below a certain required threshold. Calculating this probability allows engineers to determine how often performance will be poor in a given system configuration.
Terminology
Summary
The paper develops a tractable analytical framework for characterizing the received Signal-to-Noise Ratio (SNR) statistics of HAPS-RIS-MIMO systems under LoS-aligned precoding to provide practical design insights. p. 0 However,
in a HAPS-mounted RIS-assisted MIMO (HAPS-RIS-MIMO)
system, the received signal-to-noise ratio (SNR) statistics
become difficult to characterize due to the cascaded Rician
small-scale fading and log-normal large-scale shadowing effects. To address this challenge, this paper develops a tractable
analytical framework for the SNR characterization of HAPSRIS-MIMO systems under LoS-aligned precoding.Where the paper says it
Problem Motivation
The received signal-to-noise ratio (SNR) statistics in a HAPS-RIS-MIMO system become difficult to characterize due to the cascaded Rician small-scale fading and log-normal large-scale shadowing effects. To address this challenge, the paper develops a tractable analytical framework for the SNR characterization of HAPSRIS-MIMO systems under LoS-aligned precoding. p. 0 However,
in a HAPS-mounted RIS-assisted MIMO (HAPS-RIS-MIMO)
system, the received signal-to-noise ratio (SNR) statistics
become difficult to characterize due to the cascaded Rician
small-scale fading and log-normal large-scale shadowing effects. To address this challenge, this paper develops a tractable
analytical framework for the SNR characterization of HAPSRIS-MIMO systems under LoS-aligned precoding. To characterize the received
SNR statistics, saddlepoint approximation is employed for
the small-scale effective channel power distribution, while
Gauss–Hermite quadrature is used to capture the composite log-normal large-scale fading effect. The resulting CDF
expression is then used to derive the outage probability
(OP) and to extract practical design insights for HAPSRIS-assisted MIMO deployments.Where the paper says it
Where the paper says it
Analytical Framework Development
The paper employs saddlepoint approximation (SPA) to characterize the distribution of the small-scale effective channel power, while Gauss–Hermite quadrature is used to incorporate the composite log-normal large-scale fading effect. The resulting framework jointly accounts for Rician–Rician cascaded fading, log-normal shadowing, LoSaligned precoding, and practical phase-dependent RIS amplitude responses. p. 1 • We derive tractable analytical expressions for the
received SNR distribution and the corresponding OP
by combining SPA with Gauss–Hermite quadrature. The resulting framework jointly accounts for Rician–
Rician cascaded fading, log-normal shadowing, LoSaligned precoding, and practical phase-dependent RIS
amplitude responses, and its accuracy is verified
through Monte Carlo simulations. Let xi
, wi ∥
NGH
i=1 denote the
abscissas and weights of the NGH-point Gauss–Hermite
quadrature rule. Then, the outage probability is approximated as
Pout(ρth) ≈
1
√
π
N
XGH
i=1
wiFQ
ρthσ
2
PT exp µtot +
√
2σtotxi
!Where the paper says it
Where the paper says it
Performance Insights and Validation
The numerical results provide both theoretical validation and practical design insights by analyzing the effects of transmit power, HAPS altitude, transmit antenna number, RIS size, RIS amplitude response, and RIS phase resolution. It is shown that optimizing the RIS phases to enhance the LoS power contribution provides substantial transmit-power savings compared with random RIS phase configurations. p. 0 The numerical results provide both
theoretical validation and practical design insights by analyzing the effects of transmit power, HAPS altitude, transmit
antenna number, RIS size, RIS amplitude response, and RIS
phase resolution. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments.Where the paper says it
Where the paper says it
Hardware Impairment Impact
Practical RIS hardware characteristics, such as minimum amplitude response and finite phase resolution, were shown to provide additional transmit-power gains of approximately 3–5 dB when combined with optimized RIS phase configurations. For instance, under the optimized RIS configuration, increasing βmin from 0. p. 9 The results show that improving the
RIS amplitude response can reduce the required transmit
power when the RIS phases are optimized. For example,
under the optimized RIS configuration, increasing βmin
from 0. For example,
under the optimized RIS configuration, increasing βmin
from 0. 9 provides more than 4 dB transmitpower reduction at the same HAPS altitude.Where the paper says it
Where the paper says it
Conclusion
The obtained results provided both theoretical validation and practical design insights for HAPS-RIS-assisted MIMO deployments. The effects of key system parameters, including transmit power, HAPS altitude, number of transmit antennas, RIS size, RIS amplitude response, and RIS phase resolution were analyzed in detail. p. 8 These contour plots
are obtained by numerically solving the inverse of the
OP expression in (70) with respect to the corresponding
design variable, such as transmit power or RIS size. In
particular, the effects of the number of MIMO antennas,
RIS size, HAPS altitude, transmit power, minimum RIS
amplitude response, and RIS phase resolution are jointly
examined. These contour plots
are obtained by numerically solving the inverse of the
OP expression in (70) with respect to the corresponding
design variable, such as transmit power or RIS size. In
particular, the effects of the number of MIMO antennas,
RIS size, HAPS altitude, transmit power, minimum RIS
amplitude response, and RIS phase resolution are jointly
examined. These contour plots
are obtained by numerically solving the inverse of the
OP expression in (70) with respect to the corresponding
design variable, such as transmit power or RIS size. In
particular, the effects of the number of MIMO antennas,
RIS size, HAPS altitude, transmit power, minimum RIS
amplitude response, and RIS phase resolution are jointly
examined. The numerical results provide both
theoretical validation and practical design insights by analyzing the effects of transmit power, HAPS altitude, transmit
antenna number, RIS size, RIS amplitude response, and RIS
phase resolution. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. The numerical results provide both
theoretical validation and practical design insights by analyzing the effects of transmit power, HAPS altitude, transmit
antenna number, RIS size, RIS amplitude response, and RIS
phase resolution. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. The numerical results provide both
theoretical validation and practical design insights by analyzing the effects of transmit power, HAPS altitude, transmit
antenna number, RIS size, RIS amplitude response, and RIS
phase resolution. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. The numerical results provide both
theoretical validation and practical design insights by analyzing the effects of transmit power, HAPS altitude, transmit
antenna number, RIS size, RIS amplitude response, and RIS
phase resolution. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments. It is shown that optimizing the RIS phases
to enhance the LoS power contribution provides substantial
transmit-power savings compared with random RIS phase
configurations. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Appendix A
The derivation of the structured covariance matrix is completed by combining the three covariance contributions yielding Reff = aINr + bmrmH r, where a = ξβ σ2g KH∥mt∥2 + σ2h (KG + 1)(KH + 1), b = ξβ σ2hKG (KH + 1)(KG + 1).
Appendix B
The derivation of the Gauss–Hermite Outage Approximation is completed by applying the Gauss–Hermite quadrature rule to (105), which yields (70). The expression in (70) characterizes the CDF of the small-scale effective channel power Q. p. 5 (60)
Then, the CDF of Q is approximated by [26]
FQ(q) ≈ Ψ(w) + ψ(w)
1
w
−
1
u
, (61)
where Ψ(·) and ψ(·) denote the standard normal CDF and
PDF, respectively. The expression in (61) characterizes the CDF of the
small-scale effective channel power Q.Where the paper says it
Appendix C
Notation defines upper-case and lower-case boldface letters denoting matrices and vectors, respectively. The functions log(·) and log10(·) denote natural and base10 logarithms, respectively. p. 2 Moreover, CN (µ, Σ) denotes a circularly
symmetric complex Gaussian random vector with mean µ
and covariance Σ, N (µ, σ2
) denotes a real Gaussian random variable, and IN denotes the N × N identity matrix. The functions log(·) and log10(·) denote natural and base10 logarithms, respectively, while arg max, arg min, and ≜
denote maximization argument, minimization argument,
and equality by definition, respectively. The notations E[·], Var(·), ∥ · ∥, tr(·), diag(·),
and ∠(·) denote expectation, variance, Euclidean norm,
trace, diagonal matrix construction, and complex phase,
respectively. Moreover, CN (µ, Σ) denotes a circularly
symmetric complex Gaussian random vector with mean µ
and covariance Σ, N (µ, σ2
) denotes a real Gaussian random variable, and IN denotes the N × N identity matrix. Finally, Section V concludes the
paper. Notation
Notation: Upper-case and lower-case boldface letters
denote matrices and vectors, respectively. Finally, Section V concludes the
paper. Notation
Notation: Upper-case and lower-case boldface letters
denote matrices and vectors, respectively. Notation
Notation: Upper-case and lower-case boldface letters
denote matrices and vectors, respectively. The operators (·)
T
, (·)
H, (·)
∗
, and ⊗ denote transpose, Hermitian
transpose, complex conjugate, and Kronecker product,
respectively. The notations E[·], Var(·), ∥ · ∥, tr(·), diag(·),
and ∠(·) denote expectation, variance, Euclidean norm,
trace, diagonal matrix construction, and complex phase,
respectively. Moreover, CN (µ, Σ) denotes a circularly
symmetric complex Gaussian random vector with mean µ
and covariance Σ, N (µ, σ2
) denotes a real Gaussian random variable, and IN denotes the N × N identity matrix. The notations E[·], Var(·), ∥ · ∥, tr(·), diag(·),
and ∠(·) denote expectation, variance, Euclidean norm,
trace, diagonal matrix construction, and complex phase,
respectively. Moreover, CN (µ, Σ) denotes a circularly
symmetric complex Gaussian random vector with mean µ
and covariance Σ, N (µ, σ2
) denotes a real Gaussian random variable, and IN denotes the N × N identity matrix. Moreover, CN (µ, Σ) denotes a circularly
symmetric complex Gaussian random vector with mean µ
and covariance Σ, N (µ, σ2
) denotes a real Gaussian random variable, and IN denotes the N × N identity matrix. The functions log(·) and log10(·) denote natural and base10 logarithms, respectively, while arg max, arg min, and ≜
denote maximization argument, minimization argument,
and equality by definition, respectively. The functions log(·) and log10(·) denote natural and base10 logarithms, respectively, while arg max, arg min, and ≜
denote maximization argument, minimization argument,
and equality by definition, respectively. Finally, Ψ(·)
and ψ(·) denote the standard normal CDF and PDF,
respectively. Notation
Notation: Upper-case and lower-case boldface letters
denote matrices and vectors, respectively. The operators (·)
T
, (·)
H, (·)
∗
, and ⊗ denote transpose, Hermitian
transpose, complex conjugate, and Kronecker product,
respectively. The functions log(·) and log10(·) denote natural and base10 logarithms, respectively, while arg max, arg min, and ≜
denote maximization argument, minimization argument,
and equality by definition, respectively. Finally, Ψ(·)
and ψ(·) denote the standard normal CDF and PDF,
respectively.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Appendix D
The optimal phase of the n-th RIS element is chosen as φopt,c,n = −∠ aRIS(ϕG, θG)∗ n aRIS(ϕH, θH). For the discrete-phase case it is obtained by nearest-point quantization as φopt,d,n = arg min φ∈Qφ φ − φopt,c,n. p. 6 6
performance. Accordingly, for the continuous-phase case,
the optimal phase of the n-th RIS element is chosen as
φopt,c,n = −∠
aRIS(ϕG, θG)
∗
n
aRIS(ϕH, θH)
n
, (71)
whereas for the discrete-phase case it is obtained by
nearest-point quantization as
φopt,d,n = arg min
φ∈Qφ
|φ − φopt,c,n| .Where the paper says it
Appendix E
The derivation of (70) from (69) is provided in Appendix B. The expression in (70) constitutes the final outage characterization of the proposed HAPS-RISassisted MIMO link. p. 6 It is important to note that (70) constitutes the final outage characterization of the proposed HAPS-RISassisted MIMO link. The expression jointly accounts for
the antenna configuration, RIS size, RIS phase quantization, phase-dependent amplitude response, Rician smallscale fading, and HAPS-induced large-scale log-normal
shadowing. It is important to note that (70) constitutes the final outage characterization of the proposed HAPS-RISassisted MIMO link. The expression jointly accounts for
the antenna configuration, RIS size, RIS phase quantization, phase-dependent amplitude response, Rician smallscale fading, and HAPS-induced large-scale log-normal
shadowing. The expression jointly accounts for
the antenna configuration, RIS size, RIS phase quantization, phase-dependent amplitude response, Rician smallscale fading, and HAPS-induced large-scale log-normal
shadowing. The effect of the MIMO and RIS geometry
is embedded in the noncentrality terms µ˜i and the
eigenvalues λi of Reff, whereas the practical RIS hardware
response is reflected through ηRIS and ξβ =
PNRIS
n=1 β
2
n
. These contour plots
are obtained by numerically solving the inverse of the
OP expression in (70) with respect to the corresponding
design variable, such as transmit power or RIS size. In
particular, the effects of the number of MIMO antennas,
RIS size, HAPS altitude, transmit power, minimum RIS
amplitude response, and RIS phase resolution are jointly
examined. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments. Furthermore, sufficiently large RIS deployments with LoS-aware
phase optimization can mitigate the degradation caused by
increased HAPS altitude and limited transmit-power budgets,
while practical RIS hardware improvements in amplitude response and phase resolution provide additional transmit-power
gains of approximately 3–5 dB. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments. Furthermore, sufficiently large RIS deployments with LoS-aware
phase optimization can mitigate the degradation caused by
increased HAPS altitude and limited transmit-power budgets,
while practical RIS hardware improvements in amplitude response and phase resolution provide additional transmit-power
gains of approximately 3–5 dB. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments. Furthermore, sufficiently large RIS deployments with LoS-aware
phase optimization can mitigate the degradation caused by
increased HAPS altitude and limited transmit-power budgets,
while practical RIS hardware improvements in amplitude response and phase resolution provide additional transmit-power
gains of approximately 3–5 dB. Moreover, LoS-aligned precoding achieves a
performance close to eigenmode precoding when the RIS phases
are properly optimized, indicating a promising low-complexity
alternative for practical HAPS-RIS-MIMO deployments. Furthermore, sufficiently large RIS deployments with LoS-aware
phase optimization can mitigate the degradation caused by
increased HAPS altitude and limited transmit-power budgets,
while practical RIS hardware improvements in amplitude response and phase resolution provide additional transmit-power
gains of approximately 3–5 dB.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The derivation of (70) from (69) is provided in Appendix B. The expression in (70) constitutes the final outage characterization of the proposed HAPS-RISassisted MIMO link.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved SNR characterization for HAPS-RIS-MIMO systems can be achieved by developing a tractable analytical framework that employs saddlepoint approximation to characterize small-scale effective channel power and Gauss–Hermite quadrature to incorporate composite log-normal large-scale fading effects.
-
The improved AI system can perform outage probability analysis for HAPS-RIS assisted MIMO links by deriving the outage probability expression from the resulting cumulative distribution function based on the characterization of received SNR statistics.
-
The system can extract practical design insights by analyzing how transmit power, HAPS altitude, transmit antenna number, RIS size, RIS amplitude response, and RIS phase resolution affect performance.
-
The AI can determine optimal RIS phase selection for both continuous and discrete cases by choosing the optimal phase as phiopt c n or the nearest-point quantization phiopt d n to enhance LoS power contribution.
-
The system can achieve performance close to eigenmode precoding using a LoS-aligned transmit beamforming strategy, offering a low-complexity alternative to eigenmode precoding for practical HAPS-RIS systems.
-
The AI can compensate for performance degradation caused by increased HAPS altitude and limited transmit power budgets by utilizing sufficiently large RIS deployments in conjunction with LoS aware phase optimization.
-
The system can achieve significant transmit power savings, approximately 3 to 5 dB, through practical RIS hardware improvements in amplitude response and phase resolution when supported by proper phase design.
Abstract
High-altitude platform station (HAPS)-mounted reconfigurable intelligent surfaces (RISs) offer a promising means of extending the coverage and reliability of future 6G and beyond wireless networks, but their performance is strongly affected by cascaded line-of-sight (LoS)-dominant fading, practical RIS hardware impairments, and location-dependent atmospheric attenuation. This paper develops a tractable performance-analysis framework for HAPS-RIS-assisted multiple-antenna systems over cascaded Rician--Rician channels. The small-scale effective channel power is statistically characterized by exploiting the structured covariance of the cascaded channel and applying saddlepoint approximation (SPA), while the composite log-normal large-scale fading and atmosphere-dependent attenuation are incorporated through Gauss-Hermite quadrature to obtain tractable approximations for the received-SNR distribution and outage probability. The framework further accounts for finite-resolution RIS phase shifts and phase-dependent reflection amplitudes. To connect the analysis with a realistic deployment, the transmitter, receiver, and HAPS locations are mapped through Earth-centered Earth-fixed east-north-up (ECEF-ENU) coordinate transformations to obtain the propagation directions and array steering vectors, enabling geometry-aided transmit precoding and LoS-aligned RIS phase configuration without requiring full instantaneous channel state information (CSI). Monte Carlo simulations show excellent agreement with the proposed analytical probability density function (PDF) and outage expressions. Moreover, the geometry-aided LoS-aligned precoder achieves outage performance nearly indistinguishable from instantaneous dominant-eigenmode precoding.
Related papers
- Open-H-RF: A Large-Scale Ultrasound Raw Channel Dataset Initiative
- Scalable Attention for 5G NR Channel Estimation
- Low-Altitude Wireless Networks: A Comprehensive Survey
- Sensing-Assisted OFDM with Index Modulation: A Waveform for Optical Wireless Integrated Communication and Localisation
- Iteration-Free Candidate Pruning and an Index-Domain VLSI Architecture for Sort-Free MIMO Box Decoding up to 1024-QAM
- A Foundation Model for Large-Scale Wireless Network Planning, Operation and Optimization