Energy Efficiency Maximization for Discrete Activation based NOMA-assisted Pinching-Antenna Systems
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.
Rosa: I'm Rosa.
Dev: And I'm Dev, here with Taro.
Rosa: We're looking at the paper: "Energy Efficiency Maximization for Discrete Activation based NOMA-assisted Pinching-Antenna Systems".
Dev: Here's the gist of the paper. Pinching-antenna systems are a promising architecture for flexible wireless communications, but energy efficiency (EE) maximization remains largely unexplored.
Rosa: This paper investigates EE maximization in a downlink nonorthogonal multiple access (NOMA)-assisted PASS by explicitly modeling the pinching antenna (PA) activation power and jointly optimizing discrete PA activation and power allocation under both quality-of-service and transmit power constraints.
Dev: System Modeling and Power Consumption The system model considers a rectangular region of width D1 along the y-axis and length D2 along the x-axis, with users located at (xk, yk, 0).
Rosa: The received channel for user k is a composite channel formed by the superposition of multiple links via N activated PAs.
Title and authors: Rosa: So we're looking at this paper, "Energy Efficiency Maximization for Discrete Activation based NOMA-assisted Pinching-Antenna Systems." It’s about how to use those flexible pinching antennas better when you have multiple users and you're doing Nonorthogonal Multiple Access.
Dev: Yeah, the authors are trying to figure out how to balance making sure everyone gets a decent connection with actually not wasting too much power. It’s tackling this mixed-integer nonlinear programming problem by looking at both which antennas to turn on and how much power to give each user.
Taro: I wonder if optimizing for energy efficiency might mean we activate way fewer antennas than just activating whatever is necessary for the best signal quality, right?
Rosa: Exactly, that’s the core idea here. They propose a two-layer iterative algorithm. The outer layer figures out which pinching antennas to activate based on an energy utility function, and the inner layer handles how you allocate the transmit power among all users once those antennas are picked.
Dev: That matching-based approach for activation sounds interesting because it tries to match users to specific antennas in a way that maximizes that utility function, which is defined by the data rate divided by the total power consumption.
Taro: So it’s not just about picking the strongest link, but picking a set of antennas and then distributing power optimally among those selected ones. What are the actual results showing?
Rosa: The numerical results show that this proposed solution gets substantial energy efficiency gains compared to other benchmark schemes they tested, and it converges really fast. The paper notes that they found that a one-to-one mapping between users and pinching antennas isn't even required for the optimal configuration.
Dev: That's significant because it suggests you can serve multiple users with a smaller set of activated antennas using less power overall, which is exactly what we want for energy efficiency. And they characterize how the activation power itself affects the optimal configuration and how much power is allocated to each user.
Title and authors: Taro: Characterizing that effect analytically sounds crucial for designing actual low activation mechanisms in the real world, not just getting a good number in a simulation. So, when you look at their analysis of the impact of that activation power, what does it tell us about what makes an antenna configuration efficient?
Rosa: They show something pretty clear: the energy efficiency goes up as long as the transmit power per antenna is below ten decibels, and then it starts to level off or saturate. It means there’s a sweet spot for how much power you put into activating those antennas.
Dev: A saturation point is good news for real-time systems because it suggests that adding more activation power beyond that point doesn't give you better energy efficiency, just more noise and consumption without a meaningful gain in efficiency. So, what about the power allocation part?
Taro: I want to know how fast this inner layer solves the power allocation subproblem. Since they are dealing with a mixed-integer nonlinear programming problem, I’m concerned about stability and speed when running these real-time loops.
Dev: They use a Dinkelbach-based algorithm for the inner layer, and they show that it has closed-form updates which means you can solve it pretty quickly in each iteration. They also showed that the SINR for user k can be represented by this quantity gamma k equals two times the minimum required rate divided by the bandwidth minus one.
Rosa: That formula for gamma k is a neat way to look at it because it simplifies how they determine those optimal power coefficients alpha K, which are related to how much power goes to each user based on their channel gain and interference from other users.
Taro: So, when you look at the results, what do you see that makes this solution better than just minimizing transmit power in a standard system? What’s the real-world impact for someone just listening?
Dev: The paper shows that this joint optimization of discrete antenna activation and power allocation leads to a much higher energy efficiency than schemes where you only focus on minimizing total transmit power. It means we can achieve better data rates for the same amount of energy spent.
Title and authors: Rosa: And the implication is that for flexible systems like pinching antennas, you need to think about how to dynamically select which parts of the antenna structure are active and how to distribute power intelligently across those active elements.
Taro: It makes sense that we need a mechanism where the AI can decide which specific pinch points to engage based on the current channel conditions and what data rate targets we have for each user.
Dev: The paper concludes by summarizing that their two-layer optimization algorithm converges quickly and achieves energy efficiency performance very close to what you would get from an exhaustive search, while also outperforming other baseline methods. This suggests a robust way to handle the complexity of this type of system design.
Rosa: So, this whole study on "Energy Efficiency Maximization for Discrete Activation based NOMA-assisted Pinching-Antenna Systems" points toward needing low activation power mechanisms for efficient pinching antenna systems in practice. It’s about being smart about turning things on and off.
Dev: Yeah, it’s a solid framework because the Dinkelbach algorithm keeps the inner loop snappy, and the matching layer handles the discrete part systematically. The overall implication is that we can design these systems with much tighter energy constraints in mind from the start.
Taro: For future work, I think it would be interesting to see how this works when you introduce more complex channel dynamics or when users have very different quality-of-service requirements that are hard to satisfy simultaneously.
Rosa: Definitely, those are the next steps. We need to test how this handles more challenging real-world scenarios where the world isn't perfectly cooperative in terms of channel conditions and user demands.
Dev: Yeah, once you get that robust enough for complex scenarios, then we could look at integrating this with other things we're working on, like those feedback delay networks or maybe even combining it with image semantic error correction to see if it helps overall system performance.
Taro: That’s a big leap from just focusing on the antenna activation and power allocation within this NOMA framework. It moves into a much wider area of integrated AI for wireless communication design, which is where things get really interesting.
The paper's summary: Rosa: So, to wrap up what we just looked at, this paper is about taking those flexible pinching antennas and making them actually efficient when you have multiple users sharing the same connection through NOMA.
Dev: Right, it’s not just about getting a strong signal for everyone; it’s about figuring out which antenna parts to turn on and how much power to send to each user so we don't waste energy.
Taro: I think the big idea they are pushing is that you can be smarter than just turning everything on because the world misbehaves and the channel conditions change.
Rosa: Exactly, they’re using this two-layer algorithm to find those optimal settings for antenna activation and power allocation simultaneously, all while keeping an eye on those quality of service requirements and total transmit power limits.
Dev: The core methodology is a matching-based approach for deciding which antennas to activate based on an energy utility function, and then a Dinkelbach-based method to figure out the exact power coefficients for each user.
Taro: That matching part sounds like it’s trying to be smart about how the users map onto the physical antenna structure itself, not just picking whatever is strongest at a given moment.
Rosa: That's right, they show that you don't even need a perfect one-to-one match between every user and antenna; you can use a smaller set of activated antennas to serve more people with less power consumption overall.
Dev: And the results are pretty compelling because they show substantial energy efficiency gains compared to the standard benchmark schemes we usually look at.
Taro: So, what they’re really showing us here is that optimizing for energy doesn't mean sacrificing the quality of connection for any single user; it’s about finding a balanced configuration.
Rosa: That's the point, and they did a cool analytical characterization of how much activation power actually impacts the whole system—it shows that there’s a specific limit where more power doesn't help efficiency anymore.
Dev: The fact that they found this sweet spot for activation power, and it affects both the antenna setup and how the power is distributed, gives us a solid handle on designing low activation mechanisms without sacrificing performance.
Taro: It also implies that if we design these systems with very low activation requirements in mind, we can build much more efficient wireless communication hardware.
Rosa: And that’s what this work points toward—it suggests that for practical flexible systems like these pinching antennas, you need a mechanism where the AI can dynamically decide which specific pinch points to engage based on what the channel is doing right now.
Dev: It moves us past just maximizing raw speed or signal strength and into designing systems that are inherently energy-aware from the start.
Taro: So, if we could implement this kind of joint optimization, it changes how we think about deploying these flexible antenna arrays in real communication scenarios.
The paper's improvements: Rosa: So, moving beyond just solving the optimization problem, what are the actual suggestions in this paper for how we can make these systems better?
Dev: Well, they emphasize that because of that energy utility function we talked about earlier, it helps us understand exactly how much power is needed to get a certain level of efficiency before it starts leveling off.
Taro: I think the real improvement they suggest is in designing the actual hardware control system so that it can handle those discrete decisions—turning things on and off—in real-time without breaking the loop rate.
Rosa: Exactly, they want to show that this two-layer structure isn't just a theory; it’s something you can actually implement, and they focused on making sure the inner power allocation update is super fast with those closed-form updates.
Dev: That speed is crucial for a real-time system; if the loop takes too long, you lose the ability to adapt quickly when things change in the wireless environment or when user demands shift.
Taro: From my side, I’m interested in what they say about graceful recovery; if the world misbehaves and one antenna fails or gets damaged, how does this framework handle that without crashing the whole system?
Rosa: They discuss that by modeling activation power explicitly, we can better predict how much overhead we'll have to manage when things go wrong, which helps in designing more resilient systems.
Dev: It also suggests a way to tune the entire system based on those analytical characterizations of the activation power, meaning you don't have to guess the optimal setting; you can use that math to guide your design choices.
Taro: That means we stop guessing and start designing with a clear understanding of where the system stops being efficient.
Rosa: So, what this suggests for future work is focusing on how this framework scales up when you add more complex constraints, like incorporating those feedback delay networks we saw in other papers.
Dev: I think the next big step is testing these ideas outside of a clean simulation environment to see how they hold up when the channel conditions are really messy and unpredictable.
Conclusion: Rosa: So we’re wrapping up this talk on "Energy Efficiency Maximization for Discrete Activation based NOMA-assisted Pinching-Antenna Systems." Basically, we looked at how to jointly optimize which antenna parts to turn on and how much power to use among users.
Dev: Right, the main implication is that if you design these systems with explicit energy constraints from the beginning, you can avoid wasting a lot of battery life without hurting the service quality for anyone.
Taro: I just think it’s interesting because it shows that efficiency isn't just about finding a high signal; it’s about being smart enough to turn things off when they don't contribute much to the overall energy goal.
Rosa: It really is, and the analytical characterization of activation power tells us exactly how much overhead we should expect to manage in these flexible antenna systems.
Dev: The paper confirms that this two-layer algorithm converges quickly, which is important because it means a real-time AI system can actually make these decisions fast enough for live communication.
Taro: I just want to follow up on the limitation they mentioned; they pointed out that the method relies on some assumptions about the channel behavior being relatively stable during those optimization steps.
Rosa: True, and that’s a big part of what we need to watch—testing this outside of a perfect simulation environment is going to be key for seeing how it handles real-world chaos.
Dev: I agree, the safety case for deploying this kind of dynamic power allocation depends heavily on how robust the inner loop is when you hit those unexpected channel dips.
Taro: So, what we’re looking at here is a framework that moves us toward designing these flexible systems with much tighter energy budgets built right into the core of their operation.
Yishi Zhang, Aditya Powari, Kaidi Wang, Yaru Fu, Daniel K. C. So
University of Manchester · Hong Kong Metropolitan University
eess.SP
Submitted: 2026-04-27
Updated: 2026-11-01
Comments: 5 pages, 4 figures. Submitted to ICC 2027 - IEEE International Conference on Communications: Green Communication Systems & Networks
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 82/100
The gist: Pinching-antenna systems are a promising architecture for flexible wireless communications, but energy efficiency (EE) maximization remains largely unexplored.
Key concepts
- Pinching Antenna (PA) Activation
- This refers to the process of selectively turning on or off specific pinching antennas in a system. The paper models this as a discrete decision: choosing which PAs to activate (Nact) and how much power to use for each activated PA, aiming to balance performance with energy consumption.
- Energy Efficiency (EE)
- EE measures how effectively the system uses its power. It is calculated by dividing the achievable data rate of all users by the total power consumed, including static power and the power used for activating and transmitting through active PAs.
- Two-Layer Iterative Algorithm
- This is a sophisticated optimization approach used to solve a very complex problem involving both discrete choices (which PA to turn on) and continuous variables (power allocation). The algorithm uses an outer layer for PA selection and an inner layer for power distribution, repeating until the optimal configuration is found.
- Dinkelbach-Based Power Allocation
- This is a mathematical technique used in the inner optimization step to efficiently solve the power allocation subproblem. It allows researchers to find the optimal power coefficients ($\alpha_k$) quickly by transforming a complex maximization problem into an iterative process based on a specific ratio.
Terminology
Summary
Pinching-antenna systems are a promising architecture for flexible wireless communications, but energy efficiency (EE) maximization remains largely unexplored. p. 0 This paper investigates EE maximization in a downlink nonorthogonal multiple access (NOMA)-assisted PASS by explicitly modeling the pinching antenna (PA) activation power and jointly optimizing discrete PA activation and power allocation under both quality-of-service and transmit power constraints. p. 0
System Modeling and Power Consumption
The system model considers a rectangular region of width D1 along the y-axis and length D2 along the x-axis, with users located at (xk, yk, 0). The received channel for user k is a composite channel formed by the superposition of multiple links via N activated PAs. p. 1 The achievable rate of user k is given by Rk(Nact) = B log2 (1 + Pt / N gk2αk / Pt / N gk2 PK j=k+1 αj + σ2). p. 1 The total power consumption is defined as Ptot = Pstatic + Pt η XK k=1 αk + NPact. p. 1
Optimization Framework
The EE maximization problem is formulated as max Nact,π,α PK k=1 Rk(Nact) / Ptot (5a) s.t. Rk(Nact) ≥ Rmin k, ∀k, XK k=1 αk ≤ 1, αk ≥ 0, ∀k, Nact ⊆ L. p. 1 This mixed-integer nonlinear programming problem is tackled using a two-layer iterative algorithm with an EE-oriented matching-based PA activation and a Dinkelbach-based power allocation. p. 0
PA Activation Strategy
The outer layer employs a one-sided one-to-one matching model to determine the optimal PA activation. The EE utility function is defined as U(Φ), PK k=1 Rk Φ / (Pstatic + Pt η PK k=1 α⋆ k + ΦPact). p. 1 Algorithm 1 iterates to find a matching Φ⋆ that satisfies the condition ∄ Φ's.t. U(Φ') > U(Φ⋆). The activated PA label set is then obtained as Nact = n ∈ N Φ⋆(n) ≠ 0. p. 2
Power Allocation Procedure
The inner layer solves the power allocation subproblem using a Dinkelbach-based algorithm with a closed-form update. Proposition 1 shows that the SINR for user k can be represented by γk = 2 Rmin k / B - 1. p. 2 The optimal power coefficients for users k ≠ K are given by αk = γk / XK j>k αj + Ck. p. 2 This leads to the objective function being transformed into a function of αK, which is then maximized iteratively. p. 2
Performance Analysis and Results
Numerical results demonstrate that the proposed solution achieves substantial EE gains over the considered benchmark schemes, while exhibiting fast convergence. The impact of activation power has been analytically characterized, revealing its effects on the behavior of the optimal configuration, EE performance, and power allocation. p. 0 Fig. 3(a) shows that the EE monotonically increases when Pt ≤ 10 dBm, and then saturates. p. 3 The results further indicate that a one-to-one mapping between users and PAs is not required, since a smaller PA set can optimally serve multiple users with lower power consumption. p. 4
Conclusions
In this paper, the authors propose a two-layer optimization algorithm for joint PA selection and power allocation in NOMA-assisted downlink PASS. The proposed algorithm converges rapidly and achieves EE performance close to the exhaustive-search optimal results and consistently outperforms other baselines. p. 4 The paper further illustrates the importance of including PA activation power in EE maximization, and the need for low PA activation mechanism for an efficient PASS. p. 4
References
[1] Y. Liu et al., “Pinching-antenna systems (PASS): A tutorial,” IEEE Trans. p. 4 Commun., vol. 74, pp. 4881–4918, 2026. p. 4
[2] Z. Ding, R. Schober and H. p. 4 Vincent Poor, “Flexible-antenna systems: A pinching-antenna perspective,” IEEE Transactions on Communications, vol. p. 4 73, no. 10, pp. 9236-9253, Oct. p. 4 2025.
[3] Z. Zhou, Z. Yang, G. Chen, and Z. p. 4 Ding, “Sum-rate maximization for noma-assisted pinching-antenna systems,” IEEE Wireless Commun Lett. p. 4, vol. 14, no. 9, pp. 2728–2732, Sep. p. 4 2025.
[4] K. Wang, Z. Ding, and R. p. 4 p. 4 Schober, “Antenna activation for NOMAassisted pinching-antenna systems,” IEEE Wireless Commun Lett. p. 4, vol. 14, no. 5, pp. 1526–1530, May 2025. p. 4
[5] P. Wang, X. He, H. Wang, and R. p. 0 Song, “Sum rate maximization for pinching antennas assisted RSMA system with multiple waveguides,” IEEE Trans. p. 4 Veh. Technol., Early Access, Dec. p. 4 2025.
[6] M. Zeng, J. Wang, G. Zhou, F. Fang, and X. p. 4 Wang, “Energy-efficient design for downlink pinching-antenna systems with QoS guarantee,” IEEE Trans. p. 4 Veh. Technol., Early Access, Aug. p. 4 13, 2025.
[7] M. Zeng, X. Li, J. Wang, G. Huang, O. A. Dobre, and Z. p. 4 Ding, “Energyefficient resource allocation for NOMA-assisted uplink pinching-antenna systems,” IEEE Wireless Commun Lett. p. 4, vol. 14, no. 11, pp. 3695–3699, Nov. p. 4 2025.
[8] S. Mohammadzadeh, K. p. 4 Cumanan, C. p. 4 Li, and Z. Ding, “Efficient downlink power allocation for NOMA-based pinching-antenna systems,” IEEE Wireless Commun Lett. p. 4, vol. 14, no. 12, pp. 4187–4191, Dec. p. 4 2025.
[9] Z. Wang, C. Ouyang, X. Mu, Y. Liu, and Z. p. 4 Ding, “Modeling and beamforming optimization for pinching-antenna systems,” IEEE Trans Commun. p. 4, vol. 73, no. 12, pp. 13904–13919, Dec. p. 4 2025.
[10] D. Gan, X. Xu, J. Zuo, X. Ge, and Y. Liu, “Joint beamforming for NOMA assisted pinching antenna systems (PASS),” IEEE Trans Commun. p. 4, vol. 74, pp. 2450–2465, 2026. p. 4
[11] Y. Xu, D. Xu, X. Yu, S. Song, Z. Ding, and R. Schober, “Joint radiation power, antenna position, and beamforming optimization for pinchingantenna systems with motion power consumption,” IEEE Trans Wireless Commun. p. 4, vol. 25, pp. 7825–7841, 2026. p. 4
[12] Y. Fu, F. He, Z. Shi, and H. p. 4 Zhang, “Power minimization for NOMAassisted pinching antenna systems with multiple waveguides,” in Proc. p. 4 IEEE Global Commun. p. 4 Conf., Taipei, Taiwan, 2025. p. 4
[13] Z. Zhou, Z. Wang, and Y. p. 0 p. 0 Liu, “Spectral and energy efficiency tradeoff for pinching-antenna systems,” arXiv preprint arXiv:2510. p. 425192, 2025. p. 4
[14] G. Zhu, X. Mu, L. Guo, et al. p. 4, “SE–EE tradeoff in pinching-antenna systems: Waveguide multiplexing or waveguide switching? p. 4,” arXiv preprint arXiv:2601. p. 404844, 2026. p. 4
[15] X. Gan, Z. Wang, and Y. Liu, “Dual-scale antenna deployment for pinching antenna systems,” arXiv preprint arXiv:2510. p. 427185, 2025. p. 4
[16] S. Rezvani, E. p. 4 A. Jorswieck, R. p. 4 Joda, and H. p. 4 Yanikomeroglu, “Optimal power allocation in downlink multicarrier NOMA systems: Theory and fast algorithms,” IEEE J Sel Areas Commun. p. 4, vol. 40, no. 4, pp. 1162–1189, Apr. p. 4 2022.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improve resource allocation in flexible wireless communication systems by using a two-layer iterative algorithm that jointly optimizes discrete antenna activation and power allocation under quality-of-service and transmit power constraints. This allows AI systems to dynamically select which pinching antennas to activate and how to distribute power among users for maximum energy efficiency.
-
Implement an EE-oriented matching based PA activation procedure where the utility function is defined as U(Phi) = PK k=1 Rk(Phi) / (Pstatic + Pt η PK k=1 α⋆ k + PhiPact). This enables the AI to select antenna configurations that maximize energy efficiency by considering both data rate and activation power.
-
Develop a Dinkelbach based power allocation procedure with closed-form updates to solve the complex mixed-integer nonlinear programming problem of EE maximization. This allows for fast and efficient determination of optimal power coefficients alpha K, leading to faster convergence in resource management decisions.
-
Characterize the impact of PA activation power analytically by analyzing how it affects
the behavior of the optimal configuration, EE performance, and power allocation.
This provides a theoretical understanding for designing low PA activation mechanisms that minimize energy consumption without sacrificing performance.
Sources
- Spectral and Energy Efficiency Tradeoff for Pinching-Antenna Systems
- SE-EE Tradeoff in Pinching-Antenna Systems: Waveguide Multiplexing or Waveguide Switching?
- Dual-Scale Antenna Deployment for Pinching Antenna Systems
Related papers
- Open-H-RF: A Large-Scale Ultrasound Raw Channel Dataset Initiative
- Scalable Attention for 5G NR Channel Estimation
- Low-Altitude Wireless Networks: A Comprehensive Survey
- Sensing-Assisted OFDM with Index Modulation: A Waveform for Optical Wireless Integrated Communication and Localisation
- Iteration-Free Candidate Pruning and an Index-Domain VLSI Architecture for Sort-Free MIMO Box Decoding up to 1024-QAM
- A Foundation Model for Large-Scale Wireless Network Planning, Operation and Optimization