Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models

arXiv:2604.24646 · eess.SY, cs.SY · Submitted 2026-04-27 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models".

Dev: Here's the gist of the paper. Orbit prediction and space situational awareness require accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude <ref:2604.24646#pg2> The method described here pairs a simplified, physics-informed atmospheric model with satellite measurements to produce observationcalibrated density estimates <ref:2604.24646#pg6> Incorporating satellite data reduces density errors relative to running the model open-loop, most clearly during disturbed conditions <ref:2604.24646#pg2> The approach remains stable when observations are sparse and runs at a small fraction of the cost of full general-circulation propagation, supporting the update cadence used in operational drag prediction <ref:2604.24646#pg6> A record of upper-atmosphere density from August 2000 to December 2025 is released alongside this work <ref:2604.24646#pg2>.

Rosa: Model Architecture and Dynamics The core of the method involves a SINDyc-AR reduced-order model that propagates thermospheric density in a PCA latent space driven by solar and geomagnetic indices <ref:2604.24646#pg2> An Extended Kalman Filter assimilates in situ LEO density measurements, correcting the reduced-order latent state in real time <ref:2604.24646#pg2>.

Dev: The model is built using PCA to compress the high-dimensional thermospheric state into a low-dimensional latent representation that retains the dominant modes of global density variability <ref:2604.24646#pg2> The dynamics are modeled as z˙(t) = f(z(t), u(t)) <ref:2604.24646#pg2>.

Rosa: This framework uses both SINDyc-AR as the nonlinear reduced-order model and DMDc as a linear reference it is compared against <ref:2604.24646#pg2>.

Paper summary: Rosa: This paper, "Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models," is tackling the problem that orbit prediction and space situational awareness need accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude >

Dev: They introduce a SINDyc-AR reduced-order model that propagates this thermospheric density in a PCA latent space driven by solar and geomagnetic indices >

Taro: Then they use an Extended Kalman Filter to assimilate in situ LEO density measurements, correcting that reduced-order latent state in real time >

Rosa: The core idea is using Principal Component Analysis, or PCA, to compress the high-dimensional thermospheric state into a low-dimensional latent representation that keeps the dominant modes of global density variability >

Dev: The dynamics are modeled as z dot t equals f of z t and u t, where SINDyc-AR is used for the nonlinear reduced-order model and DMDc is compared against it as a linear reference >

Taro: The assimilation framework uses an augmented companion state zeta k defined in Eq. (thirteen), which correctly propagates the cross-covariances between the current and lagged latent states that show up in any AR process >

Rosa: When they get a log10 density measurement yk, the innovation is calculated as nu k equals yk minus Haug hat zeta kk-one minus mu, where Haug is augmented as H plus zero >

Dev: This formulation correctly handles those cross-covariances that arise in an AR process, and the observation operator is augmented to include that log10 density measurement >

Conclusion: Rosa: So we've been looking at how this paper uses SINDyc models and data assimilation to get better estimates of thermospheric density, and now we’re heading into the conclusion to see what it actually means for us out here on the ground or in space.

Dev: Yeah, so the title itself, "Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models," it tells you a lot about how they tackled this problem—it’s about taking a complex physics model and making it fast enough to actually use with real satellite data >

Rosa: Right. It means they took these high-dimensional atmospheric states, right? And instead of running a super slow general circulation model every time, they used this reduced-order model to get the main stuff quickly >

Dev: Exactly. And then the data assimilation part—the Extended Kalman Filter—that’s where you take those actual measurements from satellites and feed them back into the system to correct the model in real time >

Rosa: So, what does that correction actually do? It means we can get a much more accurate picture of how dense the atmosphere is right where a satellite is, especially when things are getting rough with solar activity or geomagnetic storms >

Dev: That’s the core idea. The results show that this approach consistently lowers the errors in density estimation compared to just running the model on its own, particularly when you look at those tracks where they actually have good data >

Rosa: And they released a big dataset, a record from two thousand to two thousand twenty-five spanning August through December, which is pretty substantial for anyone trying to study long-term atmospheric trends >

Dev: It’s a good dataset, but we gotta remember what the paper flags as limitations. They admit that using just ten PCA basis functions for the model might miss some of the smaller, more localized density structures during really extreme storm conditions >

Rosa: So it’s not perfect everywhere—it's good where they have data, but they know it might struggle in those super chaotic moments or at very high latitudes >

Dev: That points toward future work, right? They suggest extending this to incorporate other density fields directly into the filter and even using TLE-based estimates for energy dissipation rates when we look ahead >

Rosa: Right. So, while this framework gives us a powerful way to get good density estimates now, it’s also showing us where the next big steps in refining these models need to happen for really tough conditions >

Department of Mechanical, Materials and Aerospace Engineering, West Virginia University

eess.SY, cs.SY

Submitted: 2026-04-27

Updated: 2026-10-29

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 80/100

The gist: Orbit prediction and space situational awareness require accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude…

Key concepts

SINDyc-AR
This is a reduced-order model that uses Sparse Identification of Nonlinear Dynamics (SINDy) combined with an Autoregressive (AR) structure. It simplifies the complex thermospheric density dynamics by finding a sparse set of coefficients that describe how the density changes based on solar and geomagnetic forcing.
Extended Kalman Filter (EKF)
The EKF is used to assimilate real-time satellite measurements into the reduced-order model. It corrects the model's predicted state in real time by comparing predictions with actual measurements, effectively reducing errors in the density estimate.
PCA Latent Space
Principal Component Analysis (PCA) is used to compress a high-dimensional thermospheric state into a much lower-dimensional space. This latent representation captures the most important modes of global density variability, making the model easier to manage and propagate.

Terminology

Summary

Orbit prediction and space situational awareness require accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude <ref:2604. p. 1

Where the paper says it

manuscript submitted to Space Weather Abstract Orbit prediction and space situational awareness require accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude. Physics-based general circulation models resolve that response but are computationally expensive, while empirical models run cheaply and carry no timeevolving atmospheric state.

24646#pg2> The method described here pairs a simplified, physics-informed atmospheric model with satellite measurements to produce observationcalibrated density estimates <ref:2604. p. 1
Where the paper says it

Physics-based models describe these processes in detail but are too slow for routine use, while simpler empirical models run quickly but track changing space-weather conditions less faithfully. The method described here pairs a simplified, physics-informed atmospheric model with satellite measurements to produce observationcalibrated density estimates.

24646#pg6> Incorporating satellite data reduces density errors relative to running the model open-loop, most clearly during disturbed conditions <ref:2604. p. 1
Where the paper says it

The simplified model represents the main patterns of thermospheric behavior and how they change in response to space weather; a data assimilation technique updates the model using density observations from satellites such as CHAMP, GRACE, GRACE-FO, GOCE, and Swarm. Incorporating satellite data reduces density errors relative to running the model open-loop, most clearly during disturbed conditions.

24646#pg2> The approach remains stable when observations are sparse and runs at a small fraction of the cost of full general-circulation propagation, supporting the update cadence used in operational drag prediction <ref:2604. p. 1
Where the paper says it

Incorporating satellite data reduces density errors relative to running the model open-loop, most clearly during disturbed conditions. The approach remains stable when observations are sparse and runs at a small fraction of the cost of full general-circulation propagation, supporting the update cadence used in operational drag prediction.

24646#pg6> A record of upper-atmosphere density from August 2000 to December 2025 is released alongside this work <ref:2604. p. 1
Where the paper says it

An observation-calibrated global density record spanning August 2000 to December 2025 is released alongside this work. 1 Plain Language Summary Predicting the density of the thermosphere, the upper layer of Earth’s atmosphere, is important for tracking satellites and managing space operations.

24646#pg2>.

Model Architecture and Dynamics

The core of the method involves a SINDyc-AR reduced-order model that propagates thermospheric density in a PCA latent space driven by solar and geomagnetic indices <ref:2604.24646#pg2> An Extended Kalman Filter assimilates in situ LEO density measurements, correcting the reduced-order latent state in real time <ref:2604. p. 0

Where the paper says it

Key Points: • A SINDyc-AR reduced-order model propagates thermospheric density in a PCA latent space driven by solar and geomagnetic indices. • An Extended Kalman Filter assimilates in situ LEO density measurements, correcting the reduced-order latent state in real time.

24646#pg2>. The model is built using PCA to compress the high-dimensional thermospheric state into a low-dimensional latent representation that retains the dominant modes of global density variability <ref:2604. p. 4
Where the paper says it

The framework developed below combines three components. PCA compresses the high-dimensional thermospheric state into a low-dimensional latent representation that retains the dominant modes of global density variability.

24646#pg2> The dynamics are modeled as z˙(t) = f(z(t), u(t)) <ref:2604. p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

p. 6
Where the paper says it

The fullstate estimate is recovered via the inverse projection xˆfull,k = Wzˆk + µ0. 3 Library Construction and SINDyc-AR With the thermospheric state represented in latent coordinates, the dynamics are modeled as z˙(t) = f(z(t), u(t)), (8) where z(t) ∈ R r is the latent state and u(t) ∈ R ndrivers is the vector of external drivers.

24646#pg2>. This framework uses both SINDyc-AR as the nonlinear reduced-order model and DMDc as a linear reference it is compared against <ref:2604. p. 3
Where the paper says it

, 2026); the same computational economy that makes ROM attractive also makes an ensemble of dynamics models tractable at an emulator’s compute budget rather than a general circulation model’s, with the spread across those models providing uncertainty quantification and evolving ROM into a reduced order probabilistic emulator (ROPE) (Licata & Mehta, 2023, 2024; Tapedia & Mehta, 2026). This work uses both: SINDyc-AR as the nonlinear reduced-order model, and DMDc as the linear reference it is compared against.

24646#pg2>.

Data Assimilation Framework

The Extended Kalman Filter (EKF) operates on the augmented companion state ζk defined in Eq. (13) <ref:2604. p. 0

Where the paper says it

mehta@mail. edu –1– arXiv:2604.

24646#pg2>. This formulation correctly propagates the cross-covariances between the current and lagged latent states that arise in any AR process <ref:2604. p. 9
Where the paper says it

(13), with the associated augmented covariance P aug k|k ∈ R naug×naug . This formulation correctly propagates the cross-covariances between the current and lagged latent states that arise in any AR process.

24646#pg2>. The observation operator is augmented as Haug = [H 0] ∈ R1×naug, where H ∈ R1×r is the log-density observation operator defined in Eq. p. 8
Where the paper says it

Log-density is easier to treat statistically and expresses relative variations directly, which is how density behavior is best characterized (Emmert & Picone, 2010). Observation operator For a satellite at position (l, τ, a) (latitude, local time, altitude), let ϕ ∈ R d denote the vector of tri-linear interpolation weights at that location.

(18) <ref:2604. p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

24646#pg2>. When a log10-density measurement yk is available, the innovation is νk = yk − Haug ˆζkk−1 − µ = yk − H zˆkk−1 − µ <ref:2604. p. 8
Where the paper says it

5 Log-Density Measurement Model Onboard satellite accelerometers and neutral mass spectrometers provide measurements of thermospheric density that span several orders of magnitude. Rather than assimilating these observations in linear density units, which would produce poorly scaled filter gains, measurements are expressed in log10 density.

24646#pg2>.

Model Identification and Extension

The SINDyc-AR model identifies a sparse set of coefficients Ξ so the dynamics are a linear combination of nonlinear basis functions drawn from a candidate library <ref:2604.24646#pg2>. The autoregressive extension adds lagged state and driver values, so that temporal lags act as lifting coordinates in the Koopman sense <ref:2604. p. 3

Where the paper says it

The SINDy with control extension (SINDyc) (Brunton et al. , 2016b) adds driverdependent and cross terms to capture state–driver interactions, and the autoregressive extension adopted here, SINDyc-AR, adds lagged state and driver values, so that temporal lags act as lifting coordinates in the Koopman sense (Arbabi & Mezi´c, 2017; Pan & Duraisamy, 2020).

24646#pg2>. The library matrix is constructed by evaluating a set of candidate functions over the available data <ref:2604. p. 6
Where the paper says it

With this convention the single-snapshot and matrix forms of the dynamics carry the coefficient matrix on the same side, z˙ = Ξ θ(z, u) and Z˙ = Ξ Θ(Z, U), so the ordering of the matrix product is fixed by the shapes and no transposition is implied between them. The library matrix is constructed by evaluating a set of candidate functions over the available data: Θ(Z, U) =            1 zi zizj ua uaub ziua .

24646#pg2>.

Performance and Output

The framework was evaluated across three assimilation scenarios during both geomagnetically active and quiet periods <ref:2604.24646#pg2>. Assimilation consistently reduces density estimation errors along assimilated orbit tracks relative to the open-loop SINDyc-AR forecast <ref:2604. p. 1

Where the paper says it

The simplified model represents the main patterns of thermospheric behavior and how they change in response to space weather; a data assimilation technique updates the model using density observations from satellites such as CHAMP, GRACE, GRACE-FO, GOCE, and Swarm. Incorporating satellite data reduces density errors relative to running the model open-loop, most clearly during disturbed conditions.

24646#pg2>. A long-term assimilated thermospheric density dataset spanning 2000–2025 is released alongside this work <ref:2604. p. 4
Where the paper says it

manuscript submitted to Space Weather This paper contributes: (i) an EKF that operates on the companion-form lifting of the SINDyc-AR emulator, so the filter propagates the cross-lag covariances the autoregressive structure implies; (ii) an analytical Jacobian propagation for the nonlinear library, keeping the error covariance consistent with the first-order expansion of the AR process so the process noise need not absorb linearization error; (iii) a log-density observation model whose measurement Jacobian is state-independent, giving a well-conditioned update across the full dynamic range of density; (iv) a multi-satellite extension that assimilates geometrically distinct tracks simultaneously in the shared latent space; and (v) an assimilated thermospheric density dataset spanning 2000–2025, released with this work. The reduced state is what makes this affordable: a 60-state EKF update costs on the order of a 60 × 60 covariance propagation rather than a computing allocation, so the covariance that carries the uncertainty on the density is propagated exactly rather than sampled from an ensemble (Section 4.

24646#pg2>.

Limitations and Future Directions

The framework has several limitations, including the choice of a fixed r = 10 PCA basis being heuristic and may underrepresent mesoscale and high-latitude density structures during extreme storm conditions <ref:2604.24646#pg2>. Cross-orbit generalization to withheld orbits remains partial, as the correction is biased toward the altitude and local-time regions that the assimilated tracks sample <ref:2604.24646#pg2>. Future work includes extending this framework to assimilate HASDMderived density fields directly within the filter <ref:2604. p. 4

Where the paper says it

The SINDycAR model operates within this latent space to identify a compact representation of the latent-state evolution under external solar and geomagnetic forcing. An EKF operates in the same latent space to assimilate onboard satellite density measurements, correcting forecast errors and propagating uncertainty estimates alongside the state.

24646#pg2> and incorporating TLE-based energy dissipation rate (EDR) density estimates <ref:2604. p. 1
Where the paper says it

Physics-based models describe these processes in detail but are too slow for routine use, while simpler empirical models run quickly but track changing space-weather conditions less faithfully. The method described here pairs a simplified, physics-informed atmospheric model with satellite measurements to produce observationcalibrated density estimates.

24646#pg2>. The authors also suggest adaptive covariance tuning using innovation-based estimation methods like expectation-maximization to provide principled online tuning of Q <ref:2604. p. 3
Where the paper says it

, 2018) gives efficient state estimation without adjusting the external drivers directly, though it does not resolve how well model error is characterized: process noise still needs tuning, and the reduced model inherits whatever biases its parent carries. What it changes is the size of the problem: a covariance of order 101–102 states can be propagated exactly, with no need to approximate it by an ensemble.

24646#pg2>.

Supporting Information

The Supporting Information provides detailed diagnostics, including the normalized permode change in the latent state due to assimilation and the 400 km global density panels with the assimilated-minus-open-loop difference field <ref:2604.24646#pg2>. The authors also archive their model code and analysis scripts on Zenodo under a CC BY 4. p. 2

Where the paper says it

ROM trades a bounded amount of physical fidelity for several orders of magnitude of compute reduction (Qian et al. , 2014; Mehta & Linares, 2017), compressing that output into a low-dimensional latent space, usually by proper orthogonal decomposition (POD) or principal component analysis (PCA) (Golub & Reinsch, 1970; Rowley et al.

0 licence <ref:2604. p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

24646#pg2>. The in situ neutral mass density measurements assimilated and withheld in this work are the CHAMP, GRACE, GRACE-FO, GOCE, and Swarm datasets of Siemes et al. p. 3
Where the paper says it

This work couples the two: a quasi-physical ROM built with both DMDc and an autoregressive SINDyc formulation, trained on TIE-GCM simulations, with an Extended Kalman Filter (EKF) assimilating in situ mass density from CHAMP, GRACE, GRACE-FO, GOCE and Swarm. It is evaluated on withheld orbits across geomagnetic conditions and single-, dual- and multi-satellite configurations, against open-loop reduced-order predictions, NRLMSIS 2.

(2023) <ref:2604. p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

24646#pg2>. The solar 10. p. 0
Where the paper says it

manuscript submitted to Space Weather Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models Sriram Narayanan1∗ , Daniele Sicoli1 , and Piyush Mehta1 1Department of Mechanical, Materials and Aerospace Engineering, West Virginia University, Morgantown, WV, USA. Key Points: • A SINDyc-AR reduced-order model propagates thermospheric density in a PCA latent space driven by solar and geomagnetic indices.

p. 0
Where the paper says it

manuscript submitted to Space Weather Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models Sriram Narayanan1∗ , Daniele Sicoli1 , and Piyush Mehta1 1Department of Mechanical, Materials and Aerospace Engineering, West Virginia University, Morgantown, WV, USA. Key Points: • A SINDyc-AR reduced-order model propagates thermospheric density in a PCA latent space driven by solar and geomagnetic indices.

7 cm flux F10. p. 5
Where the paper says it

(3) The thermosphere is primarily forced by two external drivers: the solar 10. 7 cm flux F10.

p. 5
Where the paper says it

(3) The thermosphere is primarily forced by two external drivers: the solar 10. 7 cm flux F10.

7 and its 41-day historical average are obtained from LISIRD (Laboratory for Atmospheric and Space Physics Interactive Solar Irradiance Data Center (LISIRD), n.d.) <ref:2604.24646#pg2>. The planetary geomagnetic index Kp is obtained from the GFZ German Research Centre for Geosciences (Matzka et al. p. 5
Where the paper says it

7 cm flux F10. 7 (in solar flux units, sfu), a proxy for solar extreme-ultraviolet radiation, and the planetary geomagnetic index Kp, which characterizes the level of geomagnetic activity.

p. 5
Where the paper says it

7 cm flux F10. 7 (in solar flux units, sfu), a proxy for solar extreme-ultraviolet radiation, and the planetary geomagnetic index Kp, which characterizes the level of geomagnetic activity.

, 2021) <ref:2604. p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

24646#pg2>. The NRLMSIS 2. p. 3
Where the paper says it

This work couples the two: a quasi-physical ROM built with both DMDc and an autoregressive SINDyc formulation, trained on TIE-GCM simulations, with an Extended Kalman Filter (EKF) assimilating in situ mass density from CHAMP, GRACE, GRACE-FO, GOCE and Swarm. It is evaluated on withheld orbits across geomagnetic conditions and single-, dual- and multi-satellite configurations, against open-loop reduced-order predictions, NRLMSIS 2.

p. 3
Where the paper says it

This work couples the two: a quasi-physical ROM built with both DMDc and an autoregressive SINDyc formulation, trained on TIE-GCM simulations, with an Extended Kalman Filter (EKF) assimilating in situ mass density from CHAMP, GRACE, GRACE-FO, GOCE and Swarm. It is evaluated on withheld orbits across geomagnetic conditions and single-, dual- and multi-satellite configurations, against open-loop reduced-order predictions, NRLMSIS 2.

1 densities used as a benchmark are computed with the models of Emmert et al. p. 3
Where the paper says it

For completeness, neural networks are also used to model the dynamics of the reduced state (Tapedia et al. , 2026); the same computational economy that makes ROM attractive also makes an ensemble of dynamics models tractable at an emulator’s compute budget rather than a general circulation model’s, with the spread across those models providing uncertainty quantification and evolving ROM into a reduced order probabilistic emulator (ROPE) (Licata & Mehta, 2023, 2024; Tapedia & Mehta, 2026).

p. 3
Where the paper says it

For completeness, neural networks are also used to model the dynamics of the reduced state (Tapedia et al. , 2026); the same computational economy that makes ROM attractive also makes an ensemble of dynamics models tractable at an emulator’s compute budget rather than a general circulation model’s, with the spread across those models providing uncertainty quantification and evolving ROM into a reduced order probabilistic emulator (ROPE) (Licata & Mehta, 2023, 2024; Tapedia & Mehta, 2026).

(2021) and Emmert et al. p. 3
Where the paper says it

1 (Emmert et al. , 2021, 2022) and the High Accuracy Satellite Drag Model (HASDM) (Storz et al.

p. 3
Where the paper says it

1 (Emmert et al. , 2021, 2022) and the High Accuracy Satellite Drag Model (HASDM) (Storz et al.

(2022) <ref:2604. p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

24646#pg2>. The TIE-GCM thermospheric density fields used to identify the reduced-order model, and used as the reference surface in the global density diagnostics, are available from the NOAA Space Weather Prediction Center on request <ref:2604. p. 4
Where the paper says it

The dataset released with this work, described fully in Section 6, is a continuous observation-calibrated global density record covering August 2000 to December 2025, built by running the filter forward across the period and ingesting whatever subset of CHAMP, GRACE, GRACE-FO, GOCE and Swarm measurements is available at each epoch. It ships in HDF5 format as the assimilated and open-loop reduced-order states on a 60- second time base, with a per-step log of contributing satellites, filter-consistency diagnostics and a notebook that reconstructs the density field on the full grid.

p. 4
Where the paper says it

The dataset released with this work, described fully in Section 6, is a continuous observation-calibrated global density record covering August 2000 to December 2025, built by running the filter forward across the period and ingesting whatever subset of CHAMP, GRACE, GRACE-FO, GOCE and Swarm measurements is available at each epoch. It ships in HDF5 format as the assimilated and open-loop reduced-order states on a 60- second time base, with a per-step log of contributing satellites, filter-consistency diagnostics and a notebook that reconstructs the density field on the full grid.

24646#pg2>. The HASDM densities used as a higherfidelity benchmark are proprietary to Space Environment Technologies and are available directly from SET under their access terms <ref:2604.24646#pg2>. The authors have no conflicts of interest to disclose <ref:2604. p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

p. 0
Where the paper says it

mehta@mail. edu –1– arXiv:2604.

24646#pg2>. The work was supported in part by the Office of the Director of National Intelligence (ODNI), Intelligence Advanced Research Projects Activity (IARPA), under contract 2023-23060200005 <ref:2604.24646#pg2>. The authors also thank the members of the Astrodynamics, Space Science & Space Technology (ASSIST) lab at WVU for their support <ref:2604.24646#pg2>. The references section lists numerous foundational works on dynamic mode decomposition and model reduction <ref:2604. p. 2
Where the paper says it

, 2022; Mezi´c, 2005). Dynamic Mode Decomposition (DMD) computes a best-fit linear operator in the original state space, a finite-rank Koopman approximation on a linear observable subspace (Schmid, 2010; Rowley et al.

24646#pg2>. The paper concludes by releasing the assimilated and open-loop reduced-order states in HDF5 format for reproducibility <ref:2604. p. 4
Where the paper says it

It ships in HDF5 format as the assimilated and open-loop reduced-order states on a 60- second time base, with a per-step log of contributing satellites, filter-consistency diagnostics and a notebook that reconstructs the density field on the full grid. The remainder of this paper is organized as follows.

24646#pg2>. The data used as input includes the CHAMP, GRACE, GRACE-FO, GOCE, and Swarm datasets of Siemes et al. p. 1
Where the paper says it

The method described here pairs a simplified, physics-informed atmospheric model with satellite measurements to produce observationcalibrated density estimates. The simplified model represents the main patterns of thermospheric behavior and how they change in response to space weather; a data assimilation technique updates the model using density observations from satellites such as CHAMP, GRACE, GRACE-FO, GOCE, and Swarm.

(2023) <ref:2604.24646#pg2>. The solar 10.7 cm flux F10.7 and its 41-day historical average are obtained from LISIRD (Laboratory for Atmospheric and Space Physics Interactive Solar Irradiance Data Center (LISIRD), n.d.) <ref:2604.24646#pg2>. The planetary geomagnetic index Kp is obtained from the GFZ German Research Centre for Geosciences (Matzka et al., 2021) <ref:2604.24646#pg2>. The NRLMSIS 2.1 densities used as a benchmark are computed with the models of Emmert et al. (2021) and Emmert et al. (2023) <ref:2604.24646#pg2>. The TIE-GCM thermospheric density fields used to identify the reduced-order model, and used as the reference surface in the global density diagnostics, are available from the NOAA Space Weather Prediction Center on request <ref:2604.24646#pg2>. The HASDM densities used as a higherfidelity benchmark are proprietary to Space Environment Technologies and are available directly from SET under their access terms <ref:2604.24646#pg2>. The authors have no conflicts of interest to disclose <ref:2604.24646#pg2>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Robust density estimation during geomagnetic storms through observation-calibrated state correction. The system can correct density errors relative to open-loop prediction, most visibly during geomagnetic storms and under singlesatellite coverage.

  2. Efficient real-time thermospheric state tracking using a reduced-order model. By propagating the state in a low-dimensional latent space, the system achieves the same computational economy that makes ROM attractive also makes an ensemble of dynamics models tractable at an emulator’s compute budget rather than a general circulation model’s.

  3. Improved accuracy across diverse observational geometries via multi-satellite assimilation. The system can assimilate geometrically distinct tracks simultaneously in the shared latent space, leading to improved estimates along every assimilated track while providing a cross-orbit generalization benefit when validating withheld orbits.

  4. Scale-invariant measurement processing using log-density observations. The observation model allows for assimilation of measurements expressed in log10 density, which is easier to treat statistically and expresses relative variations directly.

  5. Long-term, continuous thermospheric density product generation. The framework can provide a continuous observation-calibrated global density record covering August 2000 to December 2025, which includes per-step diagnostics for assessing filter behavior over the entire observational period.

Abstract

Orbit prediction and space situational awareness require accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude. Physics-based general circulation models resolve that response but are computationally expensive, while empirical models run cheaply and carry no time-evolving atmospheric state. An autoregressive Sparse Identification of Nonlinear Dynamics with control (SINDyc-AR) model, derived from the Thermosphere-Ionosphere-Electrodynamics General Circulation Model (TIE-GCM), captures the dominant modes of variability and their dependence on the drivers at a fraction of the parent model's cost. An extended Kalman filter assimilates in situ observations from CHAMP, GRACE, GRACE-FO, GOCE, and Swarm into that model across several orbital configurations and geomagnetic conditions, with a linear DMDc model as reference. Assimilation reduces density error relative to open-loop prediction, most visibly during geomagnetic storms and under single-satellite coverage. The two reduced-order models perform comparably throughout. NRLMSIS 2.1 and HASDM can outperform the assimilated model far from the assimilated track, so results are framed as improvements over the open-loop forecast. An observation-calibrated global density record spanning August 2000 to December 2025 is released alongside this work.

Sources

Related papers