Quark Number Susceptibilities and Conserved Charge Fluctuations in (2+1) -flavor QCD with M"obius domain-wall fermions (MDWF)

arXiv:2604.22514 · hep-lat, hep-ph · Submitted 2026-04-24 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Quark Number Susceptibilities and Conserved Charge Fluctuations in (2+1) -flavor QCD with M"obius domain-wall fermions (MDWF)".

Mira: Here's the gist of the paper. Quark Number Susceptibilities and Conserved Charge Fluctuations in (2 + 1)-flavor QCD with Möbius domain-wall fermions is a study that calculates second- and selected fourth-order conserved-charge fluctuations in (2 + 1)-flavor QCD using Möbius domain-wall fermions along a line of constant physics, providing equilibrium input relevant for the interpretation of heavy-ion data and for assessing the hadron resonance gas baseline in the crossover region Lattice Setup and Methodology Gauge ensembles for (2 + 1)-flavor QCD were generated using Möbius domain-wall fermions (MDWF) and the tree-level Symanzik-improved gauge action with the rational hybrid Monte Carlo (RHMC) algorithm The MDWF kernel is given by DM = (b + c)DWilson(−M5)2 + (b − c)DWilson(−M5), with parameters b = 3/2, c = 1/2, M5 = 1.0, and fifth-dimensional extent Ls = 12 To reduce residual chiral-symmetry breaking, three levels of stout-link smearing are applied The simulations were performed along a line of constant physics defined by mlatt l/mlatt s = ml + mres(β) / ms + mres(β) = const.

Kai: (3) Quark Number Susceptibilities The pressure can be expanded in the quark chemical potentials as P T4 = X i+j+k=even χ uds i!

Mira: j!

Kai: k!

Title and authors: Kai: So we're looking at this paper now, "Quark Number Susceptibilities and Conserved Charge Fluctuations in (two plusone)-flavor QCD with Möbius domain-wall fermions (MDWF)" <ref:2604.22514#pg1,Quark Number Susceptibilities and Conserved Charge Fluctuations in (2+1)-flavor QCD>. It’s a study using these specific lattice methods to check how things behave in the quark number sector.

Mira: Yeah, the title tells us it's about two things: the quark number susceptibilities and these conserved charge fluctuations. Essentially, they are looking at how different combinations of quarks—up, down, and strange—react when you change the chemical potential.

Lev: And they are using Möbius domain-wall fermions along a line of constant physics to get equilibrium input for heavy-ion data interpretation. That's the big context here: connecting lattice simulations to what we see in experiments.

Kai: Right, so what they’re doing is calculating second and selected fourth-order conserved-charge fluctuations using this MDWF setup across different quark mass ratios, specifically ml over ms equal to one over ten and one over twenty seven point four.

Mira: That ratio choice is important because it lets them investigate both the lattice spacing effects at heavier pion mass and how the light quark mass dependence changes all the way down to the physical point.

Lev: From a real hardware standpoint, that means they’re testing how much noise in those fourth-order cumulants actually gets in the way when you try to run these simulations on real machines, which is where things get tricky.

Kai: The paper points out some improvements they've made to the original methods used for this study. They are focusing on how they can better control chiral symmetry at finite lattice spacing, which is a known issue with domain wall fermions.

Mira: And they’re also looking at how the results change when you look at different temporal extents and different quark mass ratios, specifically examining the lattice spacing effects at heavier pion mass and the light-quark mass dependence down to the physical point.

Lev: That systematic comparison across different settings helps us figure out if we are seeing real physics or just artifacts from our simulation setup, which is a huge deal for making these results reliable.

Kai: They also used configuration by configuration mass reweighting to correct for any mistuning of that line of constant physics they established in the simulations, giving them a more accurate study of how observables change with light quark mass.

Title and authors: Mira: That’s smart because the physical point is where we need to be for interpreting heavy-ion data, and correcting for that mistuning helps bridge the gap between their lattice setup and reality.

Lev: I guess that reweighting adds a lot of computational overhead, though, so it’s a trade-off between precision and feasibility on real hardware.

Kai: Now let's talk about the results themselves. For second-order conserved-charge fluctuations, they find that most observables are consistent with heavy resonance gas expectations below the pseudocritical temperature, specifically with the QMHRG2020 baseline.

Mira: That’s a nice check against our existing models; it suggests their second-order findings are generally in line with what we expect in that temperature range.

Lev: But they mention that the electric-charge fluctuation, which is dominated by pion physics, shows the strongest light quark mass dependence, and they note it’s visibly suppressed for heavier pion masses.

Kai: That suppression of the electric-charge fluctuation by increasing the pion mass is a key finding because it directly links these fluctuations to how strongly pions interact in that regime.

Mira: By contrast, observables that are dominated by strange or baryonic contributions show much weaker mass dependence, which suggests those sectors are less sensitive to those specific quark masses in this context.

Lev: If we were trying to run a real experiment on heavy ions, we’d want that strong light quark mass dependence in the electric-charge channel to be something we could really isolate and measure clearly.

Kai: Moving onto the fourth-order fluctuations, which they present for selected channels at the physical pion mass, those are numerically much more demanding. They involve several derivatives with respect to the light quark chemical potentials and multiple disconnected contributions.

Mira: That’s where things get tough; you're dealing with a lot of statistical noise when you ask for these higher-order cumulants, especially in channels involving multiple derivatives.

Lev: From an error correction perspective, they implemented advanced stochastic estimation techniques using Gaussian random sources together with dilution and unbiased estimators to control that statistical uncertainty.

Kai: That technique is crucial because it helps tame the noise in those higher-order calculations when you’re dealing with complex derivatives like that.

Mira: And they also mentioned that in the hadronic regime, these fourth-order cumulants get contributions from strange hadrons, and charged kaons contribute significantly to the electric-charge strangeness correlations.

Lev: That means if we try to use this to model the hadronic phase in a heavy ion collision, we have to account for those specific strange hadron interactions explicitly.

Title and authors: Kai: In terms of comparison with other models, they found that for chi S4 and chi QS13, the pressure from the hadronic resonance gas baseline tends to lie below their lattice data at low temperature.

Mira: That discrepancy is interesting; it suggests the simple hadron resonance gas model might be underestimating the fluctuations in those specific channels at low temperatures.

Lev: If we were trying to build a transport model for heavy-ion collisions, that gap between the baseline and the lattice data would tell us exactly where our hadronic interaction models need adjustment.

Kai: And on a more positive note, their QMHRG2020 calculation is generally closer to the observed trend in those channels at low temperature.

Mira: So they’re finding that while there are differences, their established baseline model is actually doing a pretty good job of tracking the lattice data in those specific fluctuation metrics.

Lev: That gives us confidence that our underlying theoretical framework for modeling the hadronic phase isn't completely off track, at least when looking at these specific charge fluctuations.

Kai: So, to wrap up on this paper about Quark Number Susceptibilities and Conserved Charge Fluctuations in (two plusone)-flavor QCD with Möbius domain-wall fermions (MDWF), they show that MDWF can be used effectively for fluctuation studies at finite temperature <ref:2604.22514#pg1,Quark Number Susceptibilities and Conserved Charge Fluctuations in (2+1)-flavor QCD>.

Mira: It provides a solid piece of equilibrium input, which is relevant for interpreting heavy-ion data and assessing the hadron resonance gas baseline in the crossover region.

Lev: It’s useful work, but they also flag their limitations; they mention that improving the statistical precision needs focus, and they need to perform controlled continuum extrapolations at the physical pion mass.

Kai: Exactly; those are the next steps—more statistics, more lattice spacings, and getting that final continuum extrapolation done accurately at the physical pion mass.

Mira: So overall, this paper gives us a clear picture of how to use these advanced lattice methods to probe quark number fluctuations in QCD. It sets a useful baseline for our future heavy-ion analysis.

Lev: I just want to say that for the fourth-order cumulants, they have shown how the numerical noise can be handled better using those stochastic estimation techniques, which is a practical piece of advice for anyone trying to run these kinds of calculations.

Kai: Right, so we’ve seen how the setup works and where it leads us. We'll see what the next paper brings to this topic soon.

The paper's summary: Kai: So, basically, this paper is taking these complex (two plus one) flavor quantum chromodynamics simulations using Möbius domain wall fermions and looking at two main things: quark number susceptibilities and conserved charge fluctuations.

Mira: Yeah, they are calculating these second and selected fourth-order fluctuations using a specific setup called a line of constant physics to get equilibrium input.

Lev: So, the goal is to get some solid numbers for heavy-ion data interpretation, especially when you're trying to figure out the hadron resonance gas baseline in that crossover region.

Kai: Right, and they are showing that these calculations can actually work well with this Möbius domain wall fermion method at finite temperature.

Mira: But they also highlight how much effort it takes to get accurate fourth-order fluctuations, especially when you're looking at multiple derivatives and disconnected contributions.

Lev: And the paper points out some technical improvements they made, like using advanced stochastic estimation techniques to control the noise in those high-order calculations better.

Kai: They've also focused on how they can better check for discretization artifacts by comparing results across different temporal extents and quark mass ratios, even down to the physical pion mass.

Mira: That systematic checking is important because it helps us figure out if we are seeing real physics or just simulation quirks related to the lattice spacing or how light the quarks are.

Lev: And they used configuration by configuration mass reweighting to correct for any mistuning they might have had with their line of constant physics, giving them a more accurate picture of how observables change as you adjust the light quark mass.

Kai: So, overall, the paper shows that this method is useful for fluctuation studies at finite temperature, but they point out that more statistics and a careful continuum extrapolation at the physical pion mass are needed for future work.

Mira: This gives us a good baseline from lattice QCD on how these charge fluctuations behave in the crossover region.

Lev: So, we need to see how this compares to what we can actually run on real hardware, because that's where the real challenge lies.

Kai: Next up, we'll talk about those specific results for second-order fluctuations and how they compare to existing models.

The paper's improvements: Kai: So, we're talking about how they are pushing the limits of this Möbius domain wall fermion method for these fluctuation studies now.

Mira: They're suggesting a few key improvements to make these calculations more robust and reliable when you get to the physical point.

Lev: What kind of improvements are we looking at? Are we talking better statistical handling or changing the simulation setup itself?

Kai: It’s about improving how they handle numerical noise, especially for those fourth-order cumulants. They're using advanced stochastic estimation techniques, like Gaussian random sources with dilution and unbiased estimators.

Mira: That’s a big deal because those high-order calculations involve lots of disconnected contributions and multiple derivatives with respect to the light quark chemical potentials.

Lev: I get that. On real hardware, running those kinds of measurements is incredibly noisy, so controlling that statistical uncertainty is crucial for getting any useful result out of it.

Kai: They’re also looking at improving the characterization of quark mass dependence by using configuration by configuration mass reweighting to fix any mistuning they had with their line of constant physics.

Mira: That correction is necessary because if you don't get that right, you can't accurately study how observables change as you move toward the physical pion mass.

Lev: It sounds like a trade-off. The reweighting adds computational overhead, which lands on real hardware in terms of time and memory, but it gives you a more accurate picture of the physics at that point.

Kai: And they are also comparing their results against other lattice discretization schemes, like HISQ and stout fermions, to quantify those discretization effects directly.

Mira: That’s interesting because it lets them see how much the way we set up the lattice actually changes what we measure.

Lev: So, if they can show how much those artifacts scale with the temporal extent or the quark mass ratio, that helps us understand how to make our own simulations more accurate.

Kai: Exactly. It’s about systematically checking those setup assumptions so you know what physics you are actually seeing when you look at these final numbers.

Mira: So, these improvements aim to give us a much cleaner and more reliable set of equilibrium inputs for the heavy-ion community.

Lev: That sounds like exactly what we need if we want to use this data to build better transport models later on.

Kai: And once they get those improved results, the next step is getting that final continuum extrapolation done really carefully at the physical pion mass.

Conclusion: Kai: So we're wrapping up this deep dive into "Quark Number Susceptibilities and Conserved Charge Fluctuations in (two plusone)-flavor QCD with Möbius domain wall fermions."

Mira: Essentially, the paper confirms that these simulations give us equilibrium input relevant for heavy-ion data and helps us assess the hadron resonance gas baseline in that crossover region.

Lev: So it’s a solid piece of equilibrium information, but we need to remember it’s from a specific lattice setup using Möbius domain wall fermions.

Kai: Right, and they do flag that improving statistical precision is a major area for future work because the fourth-order cumulants are numerically demanding.

Mira: They also emphasize the need for controlled continuum extrapolations at the physical pion mass to really lock down those results.

Lev: If we want to use these results for real hardware, we have to know how much overhead those statistical improvements actually land on our systems.

Kai: It’s a good summary of what they did: showing that MDWF can be effective for fluctuation studies at finite temperature, but the next phase is all about refining the precision and checking that continuum extrapolation.

Mira: It sets a useful baseline for how these specific charge fluctuations behave in the crossover region, which is something we can compare against our models.

Lev: So, it’s a solid starting point for model building if we get those final numbers refined.

Kai: Absolutely. We'll keep an eye on that paper as they push to improve those statistics and get that physical pion mass extrapolation done.

Jishnu Goswami, Yasumichi Aoki, Hidenori Fukaya, Shoji Hashimoto, Issaku Kanamori, Takashi Kaneko, Yoshifumi Nakamura, David Ward and Yu Zhang

Fakultät für Physik, Universität Bielefeld · RIKEN Center for Computational Science (R-CCS) · Department of Physics, Osaka University · KEK Theory Center, High Energy Accelerator Research Organization (KEK) · School of High Energy Accelerator Science, Graduate University for Advanced Studies (SOKENDAI)

hep-lat, hep-ph

Submitted: 2026-04-24

Updated: 2026-11-01

Comments: 17 pages, 12 figures

Journal ref: Phys. Rev. D 114, 074516, 29 October, 2026

DOI: 10.1103/7vkn-kb1l

Code: https://github.com/paboyle/Grid

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 85/100

The gist: Quark Number Susceptibilities and Conserved Charge Fluctuations in (2 + 1)-flavor QCD with M¨obius Domain Wall Fermions calculates second- and selected fourth-order conserved-charge fluctuations in…

Key concepts

Möbius Domain-Wall Fermions (MDWF)
This is a specific numerical method used to simulate Quantum Chromodynamics (QCD) on a lattice. It uses a five-dimensional setup and specific kernel parameters to reduce residual chiral symmetry breaking, allowing for more accurate calculations of QCD properties, especially at finite temperature.
Quark Number Susceptibilities
These are coefficients derived from expanding the pressure in terms of quark chemical potentials. They quantify how the system's response (like density fluctuations) changes when you add or remove quarks, providing crucial information about the QCD phase transition.
Fourth-Order Cumulants
These are higher-order statistical measures derived from trace operators ($D_f^n$) used to calculate conserved-charge fluctuations. They are numerically demanding but offer more detailed insights into the correlation structure of quark number fluctuations compared to simpler second-order terms.
Line of Constant Physics
This technique ensures that simulations are performed along a specific trajectory in the parameter space (e.g., temperature and chemical potential) where certain physical quantities remain constant, allowing for a controlled study of how observables behave as quark masses change.

Terminology

Summary

Quark Number Susceptibilities and Conserved Charge Fluctuations in (2 + 1)-flavor QCD with M¨obius Domain Wall Fermions calculates second- and selected fourth-order conserved-charge fluctuations in (2 + 1)-flavor QCD using M¨obius domain-wall fermions along a line of constant physics

Lattice Setup and Methodology

Gauge ensembles for (2 + 1)-flavor QCD were generated using M¨obius domain-wall fermions (MDWF) and the tree-level Symanzik-improved gauge action with the rational hybrid Monte Carlo (RHMC) algorithm The simulations were performed along a line of constant physics defined by mlatt l/mlatt s = ml + mres(β) / ms + mres(β) = const The line of constant physics is defined by keeping the renormalized strange-quark mass constant in physical units, with mphys s = Zm(β) mlatt s a−1 (β)

Quark Number Susceptibilities

The pressure can be expanded in the quark chemical potentials as P T4 = X i+j+k=even χuds i j k µˆi u µˆj d µˆk s, χuds i j k = 1/V T3 ∂i+j+k lnZ ∂µˆi u ∂µˆj d ∂µˆk s Fourth-order cumulants are constructed from the trace operators Df n as χf 4 = 1/NτN3 σ h Z f 4 − 3(Z f 2)2 i, (8)

Second-Order Conserved-Charge Fluctuations

For second order fluctuations, the conserved-charge susceptibilities are related to the quark-number susceptibilities by χS2 = χs2, χB2 = 1/9 2χu2 + χs2 + 2χud11 + 4χus11, and χQ2 = 1/9 5χu2 + χs2 − 4χud11 − 2χus11 The strongest light-quark-mass dependence is observed in the electric-charge fluctuation χQ2, which is strongly influenced by the pion sector and is visibly suppressed for the heavier pion mass

Fourth-Order Conserved-Charge Fluctuations

Selected fourth-order cumulants are computed at the physical pion mass For selected fourth-order conserved-charge cumulants, several channels with controlled uncertainties permit a first comparison with hadron resonance gas calculations Observables involving χu4 and/or several off-diagonal light-quark susceptibilities are numerically the most demanding in the hadronic regime, whereas strange-sector quantities are generally better resolved

Comparison with Hadron Resonance Gas

For second-order conserved-charge fluctuations, most observables are consistent, within current uncertainties, with HRG expectations below the pseudocritical temperature, in particular with the QMHRG2020 baseline The comparison between MDWF results at the physical light-quark mass and staggered-fermion calculations shows that MDWF results for χQ2 lie closer to the HRG expectation than the staggered results shown at finite lattice spacing for T ≲ 160 MeV

Sensitivity to Light-Quark Mass

The strongest light-quark-mass dependence is seen in the electric-charge fluctuation χQ2, which is strongly influenced by the pion sector and is visibly suppressed for the heavier pion mass By contrast, observables dominated by strange or baryonic contributions show substantially weaker mass dependence Overall, the comparison with QMHRG2020 supports the interpretation that the observed low-temperature mass dependence is driven primarily by the hadron spectrum

Fourth-Order Correlation Diagnostics

For fourth-order conserved-charge cumulants, in these channels, the QMHRG2020 baseline is often closer to the lattice data than the PDG-HRG baseline, while deviations from both HRG models become more visible across the crossover region The ratio of fourth- to second-order conserved-charge cumulants, R Q42 ≡ χQ4χQ2 + O(µB 2), X = Q, S, is often discussed as a useful diagnostic of the underlying degrees of freedom The strangeness ratio RS42 = χS4χS2 is consistent with PDG-HRG and QMHRG2020

Conclusion and Outlook

Overall, our results show that MDWF can be used effectively for fluctuation studies at finite temperature Future work should focus on improving the statistical precision, extending the calculations to additional lattice spacings and larger volumes, and performing controlled continuum extrapolations The paper concludes by stating that a continuum study will therefore be required before drawing firmer conclusions about discretization effects and agreement with HRG

Acknowledgements

The project is supported by the MEXT as “Program for Promoting Researches on the Supercomputer Fugaku” (JPMXP1020200105),“Simulation for basic science: approaching the quantum era” (JPMXP10230411) and Joint Institute for Computational Fundamental Science (JICFuS) This work is supported in part by JSPS KAKENHI Grant Number 20H01907 The simulations are performed on the supercomputer “Fugaku” at RIKEN Center for Computational Science (HPCI project hp240295,hp230207,hp200130, hp210165, hp220174 and Usability Research ra000051) J. Goswami and Y. p. 0

Where the paper says it

Quark Number Susceptibilities and Conserved Charge Fluctuations in (2 + 1)-flavor QCD with M¨obius Domain Wall Fermions Jishnu Goswami,1 Yasumichi Aoki,2 Hidenori Fukaya,3 Shoji Hashimoto,4, 5 Issaku Kanamori,2 Takashi Kaneko,4, 5 Yoshifumi Nakamura,2 David Ward,3 and Yu Zhang1 (JLQCD Collaboration) 1Fakult¨at f¨ur Physik, Universit¨at Bielefeld, 33615 Bielefeld, Germany 2RIKEN Center for Computational Science (R-CCS), 7-1-26, Minatojima Minamimachi, Kobe 650-0047, Japan 3Department of Physics, Osaka University, Toyonaka, Osaka 560-0043, Japan 4KEK Theory Center, High Energy Accelerator Research Organization (KEK), Tsukuba 305-0801, Japan 5School of High Energy Accelerator Science, Graduate University for Advanced Studies (SOKENDAI), Tsukuba 305-0801, Japan We calculate second- and selected fourth-order conserved-charge fluctuations in (2 + 1)-flavor QCD using M¨obius domain-wall fermions (MDWF) along a line of constant physics. Gauge ensembles were generated for two light-to-strange quark-mass ratios, ml/ms = 1/10 and 1/27.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved physical interpretation of lattice QCD results by integrating hadron resonance gas calculations into fluctuation analysis to provide a first comparison with hadron resonance gas calculations for second-order fluctuations below the pseudocritical temperature.

  2. Enhanced ability to assess discretization artifacts by systematically comparing Møbius domain wall fermion (MDWF) results across different temporal extents and quark mass ratios, specifically examining lattice-spacing effects at heavier pion mass and light-quark-mass dependence down to the physical point.

  3. Superior handling of numerical noise in fourth-order cumulants by implementing advanced stochastic estimation techniques, such as using Gaussian random sources together with dilution and unbiased estimators to control the statistical uncertainty, particularly for channels involving multiple derivatives.

  4. More precise characterization of quark mass dependence by employing configuration-by-configuration mass reweighting to correct for the mistuning of the line of constant physics in simulations, allowing for a more accurate study of how observables change with light-quark mass.

  5. Advanced comparison capabilities by enabling direct benchmarking against different lattice discretization schemes (like HISQ and stout fermions) to quantify discretization effects and compare MDWF results with existing calculations at the physical pion mass.

Abstract

We calculate second- and selected fourth-order conserved-charge fluctuations in (2+1) -flavor QCD using Möbius domain-wall fermions (MDWF) along a line of constant physics. Gauge ensembles were generated for two light-to-strange quark-mass ratios, m l/m s=1/10 and 1/27.4, corresponding to heavier-than-physical and physical pion masses, respectively. For m l/m s=1/10, calculations were carried out on lattices with temporal extents N τ=12 and 16, enabling an assessment of lattice-spacing effects at heavier pion mass. For m l/m s=1/27.4, calculations were performed at N τ=12, allowing us to study the light-quark-mass dependence down to the physical point. Below the pseudocritical temperature, second-order electric-charge, strangeness, and off-diagonal conserved-charge fluctuations are consistent with QMHRG2020 hadron resonance gas calculations. Across the crossover region, these observables rise rapidly and tend toward their Stefan--Boltzmann limits. Selected fourth-order cumulants were also computed at the physical pion mass. Although these observables are statistically more demanding, several channels with controlled uncertainties permit a first comparison with hadron resonance gas calculations.

Sources

Related papers