The physics of ELM-free regimes in EUROfusion tokamaks
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: We're looking at the paper: "The physics of ELM-free regimes in EUROfusion tokamaks".
Mira: Here's the gist of the paper. The development of operational scenarios without large Type-I ELMs is of utmost importance for the stable operation and longevity of future tokamaks.
Kai: The contribution focuses on the development and understanding of the NT and QCE regimes on ASDEX Upgrade, JET, and TCV.
Mira: Pruning redundant reasoning tokens The overarching aim of the research topic is directed at the physics understanding of large-ELM-free regimes rather than the development of an integrated high performance, detached ELM free scenario.
Kai: A wide range of scenarios are being investigated across the different machines, covering the enhanced D-alpha (EDA), magnetic perturbation (MP), negative triangularity (NT), quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs (SE), I-mode, and X-point radiator (XPR) regimes.
Paper summary: Kai: The paper "The physics of ELM-free regimes in EUROfusion tokamaks" is really focused on establishing robust operational scenarios for fusion devices that avoid those big Type-I ELMs, which is a major hurdle for making future tokamaks stable and long-lasting.
Mira: It claims that understanding these ELM-free regimes requires looking at the physics of transport within the pedestal determining the average pedestal gradient and identifying when a global peeling ballooning mode begins, as shown in their schematic on page three of The physics of ELM-free regimes in EUROfusion tokamaks <ref:2604.20484#pg1,The physics of ELM-free regimes in EUROfusion tokamaks>.
Lev: So, it sets up this framework by linking transport effects directly to the onset of instability modes across different plasma regimes.
Kai: They break down the avoidance strategies into two main types: one where you raise stability limits for things like QCE or quiescent H-mode by creating more transport, and another that drastically reduces stability so you can't even access standard H-mode, like in negative triangularity plasmas.
Mira: This categorization matters because it suggests that the physical reasons for ELM avoidance are quite different depending on whether you're dealing with a QCE or an NT plasma.
Lev: From an engineering standpoint, this helps us know what kind of physical control mechanisms we need to design into the tokamak systems for these different operational spaces.
Kai: They use experiments on ASDEX Upgrade, JET, and TCV to compare these scenarios against standard ELMy H-modes and also validate their modeling-driven stepladder approach across these devices.
Mira: The key contribution is using this stepping approach to shorten the time needed to develop scenarios for both QCE and NT demonstrations in JET.
Lev: That validation step is vital because it means we don't have to spend years building models only to find out they don't work on real hardware like TCV or JET.
Kai: They also use these comparisons, like the density profiles shown on page twelve to highlight the relative strengths of the QCE and NT approaches to ELM avoidance.
Mira: And ultimately, it uses ideal MHD predictions for the QCE regime to suggest that it's a relevant operational scenario for ITER based on predicted minimum separatrix density and pedestal top density values.
Conclusion: Kai: So, to wrap up "The physics of ELM-free regimes in EUROfusion tokamaks," the core idea is that we can use a step-by-step approach across different devices to build a reliable understanding of how to operate fusion machines without those big Type-I ELMs.
Mira: The authors are showing that this approach works well for both quasi-continuous exhaust and negative triangularity regimes, and it provides concrete predictions for what ITER needs in terms of plasma density requirements.
Lev: It means the modeling is proving useful in a real way because they successfully validated the concepts on smaller machines before projecting them onto larger ones.
Kai: The implication for us is that we have a much clearer picture of how to design tokamak operations to be more stable over longer timescales, which is essential for any reactor aiming for long-term operation.
Mira: It's about moving from just observing ELMs to actively designing plasma conditions where they don't happen, whether you're looking at ITER or a future reactor.
Lev: The work suggests that the physics we understand now, especially regarding QCE access in ITER, is directly applicable to the design phase of future fusion devices.
Max-Planck-Institute for Plasma Physics · Ecole Polytechnique Federale de Lausanne Swiss Plasma Center · Dept. of Atomic, Molecular and Nuclear Physics University of Seville Spain · United Kingdom Atomic Energy Authority Culham Science Centre United Kingdom of Great Britain and Northern Ireland · Plasma Science and Fusion Center Massachusetts Institute of Technology United States of America · Laboratory for Plasma Physics LPP-ERM/KMS Brussels Belgium · Institute of Applied Physics TU Wien Fusion@ÖAW Vienna Austria · Laboratorio Nacional de Fusión CIEMAT Spain
physics.plasm-ph
Submitted: 2026-04-22
Updated: 2026-04-22
Journal ref: M.G. Dunne et al 2026 Nucl. Fusion 66 106024
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 88/100
The gist: The development of operational scenarios without large Type-I ELMs is of utmost importance for the stable operation and longevity of future tokamaks.
Key concepts
- Type-I ELM Avoidance
- This refers to two main ways to prevent large Edge-Localized Modes (ELMs). One method raises the stability limit for QCE/QH modes by creating additional transport via an MHD mode. The other significantly reduces stability limits, preventing H-mode access entirely, as seen in NT plasmas.
- Quasi-Continuous Exhaust (QCE)
- QCE is a plasma regime where ELMs are avoided through strong pedestal gradients. It requires high shaping and high separatrix density to be accessed. Its performance metrics, when normalized, are comparable to ELMy H-mode plasmas, making it a viable scenario for ITER.
- Negative Triangularity (NT)
- NT is a plasma regime where ELM avoidance is achieved by blocking access to ballooning second stability. This was demonstrated on JET using shaping requirements that proved sufficient for ELM suppression.
Terminology
Summary
The development of operational scenarios without large Type-I ELMs is of utmost importance for the stable operation and longevity of future tokamaks. p. 0 1088/1741-4326/ad3e16
Abstract. The development of operational scenarios without large Type-I ELMs is
of utmost importance for the stable operation and longevity of future tokamaks. An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes. This contribution focuses on the
development and understanding of the NT and QCE regimes on ASDEX Upgrade,
JET, and TCV.Where the paper says it
Where the paper says it
Pruning redundant reasoning tokens
The overarching aim of the research topic is directed at the physics understanding of large-ELM-free regimes rather than the development of an integrated high performance, detached ELM free scenario. A wide range of scenarios are being investigated across the different machines, covering the enhanced D-alpha (EDA), magnetic perturbation (MP), negative triangularity (NT), quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs (SE), I-mode, and X-point radiator (XPR) regimes. p. 1 Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26]. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26]. The focus of this contribution is on the well-developed understanding of NT and QCE
plasmas.Where the paper says it
Where the paper says it
How the training signal is built
The physics picture of Type-I ELM avoidance can be understood as an intersection of transport in the pedestal determining the average pedestal gradient and the onset of a global peeling-ballooning mode. There are two main categories of large-ELM avoidance: one applies to e. p. 2 A large ELM crash can be avoided by tailoring both the transport and MHD
limits. There are then two main categories of large-ELM avoidance: one applies to e. QCE[31] and QH mode[19], where the Type-I ELM stability limit is raised (e. via
increased plasma shaping) and additional transport is created via an MHD mode. This
allows an ELMy H-mode-like pedestal gradient to be sustained, shown by the green
star, without the presence of large ELMs. The second category reduces both stability
limits significantly, to the point where the H-mode is no longer accessed, as is the case
in NT plasmas, corresponding to the blue lines in figure 1; here, the star indicates the
low expected pedestal gradient, which remains below the peeling-ballooning boundary.Where the paper says it
Where the paper says it
Where the paper says it
Where the gains come from
The key feature of these experiments is the validation of the modelling-driven stepladder approach to the experiments. For negative triangularity (NT), blocking access to ballooning second stability avoids H-mode entry. p. 3 Initial
negative triangularity discharges at AUG showed no signs of ELM-avoidance or Hmode avoidance[14, 42]. Since the original experiments the understanding of NT ELM
avoidance[12, 39, 43] has developed, showing that blocking access to ballooning second
stability avoids H-mode entry. The manuscript is structured as follows: an introduction to a simple conceptual
model of ELM-avoidance is presented, along with the tools which are used for modelling. The progress in developing ELM-free negative triangularity scenarios on ASDEX
Upgrade and JET, following detailed experiments at TCV will be mentioned. Work is still ongoing to characterise the transport
across the entire plasma radius in the full set of JET-NT discharges. These experiments
have, however, shown that robust ELM avoidance can be obtained in a large device,
at substantial levels of heating power, and that the shaping required for this can be
predicted in advance via only the engineering parameters (current, field, and plasma
shape), building confidence in our ability to design NT ELM-avoidance scenarios in
future devices.Where the paper says it
Where the paper says it
Where the paper says it
Comparison of NT and QCE at JET
A comparison of the electron temperature and density profiles for the two discharges is shown in figure 12. The QCE discharge has a significantly higher density than the NT discharge, which stems from a strong pedestal gradient. p. 8 70
Time (s)
0
20
40
kA
(e)
Figure 6. Plots of the (a) main ion fuelling, (b) pedestal top (solid) and separatrix
(dashed) density and ELM monitor during the flat-top of an AUG QCE discharge. paper will, however, focus more on recent progress in the QCE regime, describing the
current access model and a comparison of the scenario with ELMing H-modes on ASDEX
Upgrade, JET, and TCV. The physics picture of Type-I ELM avoidance
The occurrence of Type-I ELMs can be understood as an intersection of transport in the
pedestal (often considered to be a KBM[27]) determining the average pedestal gradient
and the onset of a global peeling-ballooning mode.Where the paper says it
Where the paper says it
Extrapolation to ITER
The ability to predict the minimum separatrix density and expected pedestal top density in the QCE regime using ideal MHD lends further support to the QCE as a plasma scenario for ITER. Previous work has indicated that the minimum separatrix density required for QCE access in ITER is approximately 30%nGW, which is in the range of densities achieved in present-day machines. p. 1 The integration of a high performance core with an ELMfree pedestal and relevant divertor physics is quite challenging in present-day machines
owing to the typical requirement of high separatrix density operation, which imposes
known limitations on plasma performance[1, 2, 3]. Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26]. Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26].Where the paper says it
Where the paper says it
Where the paper says it
Summary and conclusions
The work presented here has shown the current understanding of the physics mechanisms for access to the QCE and NT large ELM-avoidance regimes. The stepladder approach within EUROfusion, understanding physics on smaller devices before applying it to larger ones, has significantly shortened scenario development time necessary for both QCE and NT demonstration in JET. p. 1 Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26]. A highlight of these efforts is the development and exploration of NT and QCE
scenarios in JET, enabled via predictive modelling. A second highlight of the recent JET
ELM-free experiments is the demonstration of both the QCE[18] and XPR[26] regimes
in DT plasmas. Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26]. The key feature of these experiments is the validation of the modelling-driven
stepladder approach to the experiments. Predictions for the minimum shaping for ELM
avoidance were made for JET and AUG, taking the restrictions of the PF coil-sets into
account. The region of stability lies in the lower left of the
plot, and above and to the right of each curve is the unstable region. paper will, however, focus more on recent progress in the QCE regime, describing the
current access model and a comparison of the scenario with ELMing H-modes on ASDEX
Upgrade, JET, and TCV. Due to the high-risk nature of
the experiments (both programatically and to the machine), only the final experimental
day was dedicated to this program. Advance preparation, as mentioned above, predicted
that the shaping which could be achieved in JET was sufficient for ELM avoidance. This
allows an ELMy H-mode-like pedestal gradient to be sustained, shown by the green
star, without the presence of large ELMs. The second category reduces both stability
limits significantly, to the point where the H-mode is no longer accessed, as is the case
in NT plasmas, corresponding to the blue lines in figure 1; here, the star indicates the
low expected pedestal gradient, which remains below the peeling-ballooning boundary.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
References
[1] M. G. Dunne, et al. The role of the density profile in the ASDEX-Upgrade pedestal structure. p. 3 Regions of the pedestal
The description of pedestal structure and transport in terms of only the pedestal height
and width does not capture the finer details of the various transport mechanisms which
can be present in the pedestal region. Gyrokinetic studies[35] of the ASDEX Upgrade
pedestal have shown a range of instabilities which can be present at a given time.Where the paper says it
[2] L. Frassinetti, et al. Pedestal structure, stability and scalings in JET-ILW: The EUROfusion JET-ILW pedestal database. p. 3 In the case of NT, H-mode avoidance has been linked with blocking
access to the second stable region in s-α space[12], particularly in the middle region of
the pedestal, where second-stability access is most likely. Access to the QCE is linked
to keeping access to second-stability open in the middle of the pedestal and an unstable
ballooning mode localised at the pedestal foot[15, 41, 31], independently of the structure
of the rest of the pedestal (which may tend towards low-, medium-, or high-n modes).Where the paper says it
[3] U. A. Sheikh, et al. Pedestal structure and energy confinement studies on TCV. p. 3 Access to the QCE is linked
to keeping access to second-stability open in the middle of the pedestal and an unstable
ballooning mode localised at the pedestal foot[15, 41, 31], independently of the structure
of the rest of the pedestal (which may tend towards low-, medium-, or high-n modes). Second stability access: negative triangularity
The flexible shaping capabilities of TCV have helped drive the understanding of the
separate elements of ELM-avoidance and confinement improvement in NT.Where the paper says it
[4] M. Greenwald, et al. p. 5 4
fGW
(d)
Figure 3. NBI heating power (a), upper (dash-dot), lower (dashed), and average
(solid) triangularity (b), plasma stored energy (c), and Greenwald fraction (d) for the
TCV companion plasma to the JET NT shape. Access to the QCE is linked
to keeping access to second-stability open in the middle of the pedestal and an unstable
ballooning mode localised at the pedestal foot[15, 41, 31], independently of the structure
of the rest of the pedestal (which may tend towards low-, medium-, or high-n modes). Second stability access: negative triangularity
The flexible shaping capabilities of TCV have helped drive the understanding of the
separate elements of ELM-avoidance and confinement improvement in NT.Where the paper says it
Where the paper says it
[5] L. Gil, et al. EDA H-mode in ASDEX Upgrade: scans of heating power, fueling, and plasma current. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[6] T. E. Evans, et al. Suppression of Large Edge-Localized Modes in High-Confinement. p. 3 Access to the QCE is linked
to keeping access to second-stability open in the middle of the pedestal and an unstable
ballooning mode localised at the pedestal foot[15, 41, 31], independently of the structure
of the rest of the pedestal (which may tend towards low-, medium-, or high-n modes). Second stability access: negative triangularity
The flexible shaping capabilities of TCV have helped drive the understanding of the
separate elements of ELM-avoidance and confinement improvement in NT.Where the paper says it
[7] R. Nazikian, et al. Pedestal Bifurcation and Resonant Field Penetration at the Threshold of Edge-Localized Mode Suppression in the DIII-D Tokamak. p. 3 Recent modelling of a
transient QH-mode phase in ASDEX Upgrade[36] has confirmed the physics picture,
and highlighted the importance of low pedestal collisionality in sustaining the QH-mode
in these plasmas. Previous studies[37] have posited the mechanism for ELM suppression via magnetic
perturbations as being caused by the presence of an island at the pedestal top, blocking
further expansion of the pedestal.Where the paper says it
[8] W. Suttrop, et al. Experimental studies of high-confinement mode plasma response to nonaxisymmetric magnetic perturbations in ASDEX Upgrade. p. 3 Recent modelling of a
transient QH-mode phase in ASDEX Upgrade[36] has confirmed the physics picture,
and highlighted the importance of low pedestal collisionality in sustaining the QH-mode
in these plasmas. Previous studies[37] have posited the mechanism for ELM suppression via magnetic
perturbations as being caused by the presence of an island at the pedestal top, blocking
further expansion of the pedestal.Where the paper says it
[9] A. E. Hubbard, et al. Multi-device studies of pedestal physics and confinement in the I-mode regime. p. 1 Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26].Where the paper says it
[10] T. Happel, et al. The I-mode confinement regime at ASDEX Upgrade: global properties and characterization of strongly intermittent density fluctuations. p. 2 paper will, however, focus more on recent progress in the QCE regime, describing the
current access model and a comparison of the scenario with ELMing H-modes on ASDEX
Upgrade, JET, and TCV. The physics picture of Type-I ELM avoidance
The occurrence of Type-I ELMs can be understood as an intersection of transport in the
pedestal (often considered to be a KBM[27]) determining the average pedestal gradient
and the onset of a global peeling-ballooning mode.Where the paper says it
[11] A. Marinoni, et al. A brief history of negative triangularity tokamak plasmas. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[12] A. O. Nelson, et al. Prospects for H-mode inhibition in negative triangularity tokamak reactor plasmas. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[13] S. Coda, et al. Enhanced confinement in diverted negative-triangularity L-mode plasmas in TCV. p. 1 A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26]. The focus of this contribution is on the well-developed understanding of NT and QCE
plasmas.Where the paper says it
[14] T. Happel, et al. Overview of initial negative triangularity plasma studies on the ASDEX Upgrade tokamak. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[15] G. F. Harrer, et al. Parameter dependences of small edge localized modes (ELMs). p. 9 This critical αedge can be transformed into a critical ne,edge as follows: an expected
αedge,exp is constructed as Rq2β/λp,scale with β ∝ ne,edgeTe,edge. Te,edge is determined
from the input heating power and Spitzer-Harm conduction, while ne,edge is used as a
free parameter to scan.Where the paper says it
[16] B. Labit, et al. Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade. p. 4 H-mode avoidance via NT in AUG
New negative-triangularity experiments, motivated by advances in prediction, were
performed in ASDEX Upgrade during the 2025 campaign; the full details of the
shape development, modelling, and plasma performance will be detailed in a separate
publication[44]. Here, we present two AUG discharges with small differences in theWhere the paper says it
[17] M. Faitsch, et al. Analysis and expansion of the quasi-continuous exhaust (QCE) regime in ASDEX Upgrade. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[18] M. Faitsch, et al. The quasi-continuous exhaust regime in JET. p. 7 These experiments
have, however, shown that robust ELM avoidance can be obtained in a large device,
at substantial levels of heating power, and that the shaping required for this can be
predicted in advance via only the engineering parameters (current, field, and plasma
shape), building confidence in our ability to design NT ELM-avoidance scenarios in
future devices. Separatrix ballooning modes: the quasi-continuous exhaust regime
The quasi-continuous exhaust regime is a regime which, in contrast to NT, is operated at
high positive plasma shaping.Where the paper says it
[19] K. H. Burrell, et al. Quiescent H-mode plasmas in the DIII-D tokamak. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[20] W. Suttrop, et al. Study of quiescent H-mode plasmas in ASDEX Upgrade. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[21] W. Suttrop, et al. Studies of the ‘Quiescent H-mode’ regime in ASDEX Upgrade and JET. p. 1 Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER. A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26].Where the paper says it
[22] E. R. Solano, et al. Observation of Confined Current Ribbon in JET Plasmas. p. 2 The physics of ELM-free regimes in EUROfusion tokamaks 3
Figure 1. Schematic of Type-I ELM avoidance for QCE (green) and NT (blue)
plasmas vs an ELMy H-mode (red) in a j-α diagram where j is the peak edge current
density and α is the normalised pressure gradient.Where the paper says it
[23] X. Chen, et al. Expanding the parameter space of the wide-pedestal QH-mode towards ITER conditions. p. 3 In the case of NT, H-mode avoidance has been linked with blocking
access to the second stable region in s-α space[12], particularly in the middle region of
the pedestal, where second-stability access is most likely. Access to the QCE is linked
to keeping access to second-stability open in the middle of the pedestal and an unstable
ballooning mode localised at the pedestal foot[15, 41, 31], independently of the structure
of the rest of the pedestal (which may tend towards low-, medium-, or high-n modes).Where the paper says it
[24] J. Garcia, et al. New H-mode regimes with small ELMs and high thermal confinement in the Joint European Torus. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[25] E. de la Luna, et al. Exploring the physics of a high-performance H-mode scenario with small ELMs at low collisionality in JET with Be/W wall. p. 1 The EUROfusion
tokamak exploitation program has therefore made the understanding of ELM-free
regimes a major topic of exploration across all its contributing devices (ASDEX Upgrade,
JET, MAST-Upgrade, TCV, and WEST). The overarching aim of the research topic is directed at the physics understanding of
large-ELM-free regimes, rather than the development of an integrated high performance,
detached ELM free scenario.Where the paper says it
[26] M. Bernert, et al. X-point radiation: From discovery to potential application in a future reactor. p. 1 Particular
focus is paid to the performance of the QCE in terms of the achieved pedestal top
values, which, when appropriately normalised, do not differ significantly from ELMy
H-mode plasmas. This, combined with the predicted minimum separatrix density for
the 15 MA ITER baseline plasma, highlight the relevance of the QCE as a potential
operational scenario for both ITER and future reactors.Where the paper says it
[27] P. B. Snyder, et al. Development and validation of a predictive model for the pedestal height. p. 1 The focus of this contribution is on the well-developed understanding of NT and QCE
plasmas. A highlight of these efforts is the development and exploration of NT and QCE
scenarios in JET, enabled via predictive modelling.Where the paper says it
[28] P.B. Snyder, et al. A first-principles predictive model of the pedestal height and width development, testing and ITER optimization with the EPED model. p. 3 The main task of understanding the physics of ELM-free regimes is then
one of understanding the transport mechanisms which regulate the pedestal gradient
and the pedestal width. Regions of the pedestal
The description of pedestal structure and transport in terms of only the pedestal height
and width does not capture the finer details of the various transport mechanisms which
can be present in the pedestal region.Where the paper says it
[29] D. Dickinson, et al. Towards the construction of a model to describe the inter-ELM evolution of the pedestal on MAST. p. 3 Access to the QCE is linked
to keeping access to second-stability open in the middle of the pedestal and an unstable
ballooning mode localised at the pedestal foot[15, 41, 31], independently of the structure
of the rest of the pedestal (which may tend towards low-, medium-, or high-n modes). Second stability access: negative triangularity
The flexible shaping capabilities of TCV have helped drive the understanding of the
separate elements of ELM-avoidance and confinement improvement in NT.Where the paper says it
[30] E. Wolfrum, et al. Overview of recent pedestal studies at ASDEX Upgrade. p. 3 Recent modelling of a
transient QH-mode phase in ASDEX Upgrade[36] has confirmed the physics picture,
and highlighted the importance of low pedestal collisionality in sustaining the QH-mode
in these plasmas. Previous studies[37] have posited the mechanism for ELM suppression via magnetic
perturbations as being caused by the presence of an island at the pedestal top, blocking
further expansion of the pedestal.Where the paper says it
[31] J. Kalis, et al. Experimental characterization of the quasi-coherent mode in EDA H-Mode and QCE scenarios at ASDEX Upgrade. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[32] M. G. Dunne, et al. Quasi-continuous exhaust operational space. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[33] M. G. Dunne, Impact of impurity seeding and divertor conditions on transitions, pedestal structure and ELMs. p. 8 This results in an increase
of both the pedestal top and separatrix densities (panel b), with the separatrix density
increasing by almost 40%. A detailed view of the ELM signatures (panel c) from the
poloidal current measured at the divertor tiles (which corresponds to the divertor heat
loads[17]) for an ELMy time window and a QCE time window are shown in panels (d)
and (e), highlighting the substantial difference in heat loads from large ELMs and the
QCE filaments.Where the paper says it
[34] P.B. Snyder, et al. High fusion performance in Super H-mode experiments on Alcator C-Mod and DIII-D. p. 4 Similar experiments
were performed for the AUG discharges, also showing robust H-mode avoidance. H-mode avoidance via NT in AUG
New negative-triangularity experiments, motivated by advances in prediction, were
performed in ASDEX Upgrade during the 2025 campaign; the full details of the
shape development, modelling, and plasma performance will be detailed in a separate
publication[44].Where the paper says it
[35] L.A. Leppin, et al. Complex structure of turbulence across the ASDEX Upgrade pedestal. p. 3 Regions of the pedestal
The description of pedestal structure and transport in terms of only the pedestal height
and width does not capture the finer details of the various transport mechanisms which
can be present in the pedestal region. Gyrokinetic studies[35] of the ASDEX Upgrade
pedestal have shown a range of instabilities which can be present at a given time.Where the paper says it
[36] L. Meier, et al. MHD simulations of formation, sustainment and loss of quiescent H-mode in the all-tungsten ASDEX Upgrade. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[37] P. B. Snyder, et al. The EPED pedestal model and edge localized mode-suppressed regimes: Studies of quiescent H-mode and development of a model for edge localized mode suppression via resonant magnetic perturbations. p. 3 Recent modelling of a
transient QH-mode phase in ASDEX Upgrade[36] has confirmed the physics picture,
and highlighted the importance of low pedestal collisionality in sustaining the QH-mode
in these plasmas. Previous studies[37] have posited the mechanism for ELM suppression via magnetic
perturbations as being caused by the presence of an island at the pedestal top, blocking
further expansion of the pedestal.Where the paper says it
[38] M. Willensdorfer, et al. Observation of magnetic islands in tokamak plasmas during the suppression of edge-localized modes. p. 1 A wide range of scenarios are being investigated across the different machines,
covering the enhanced D-alpha (EDA)[4, 5], ELM suppression via magnetic perturbation
(MP)[6, 7, 8], the I-mode[9, 10], negative triangularity(NT)[11, 12, 13, 14], the quasicontinuous exhaust (QCE) regime[15, 16, 17, 18], quiescent H-mode (QH)[19, 20, 21,
22, 23], the baseline small ELMs (SE)[24, 25], and X-point radiator (XPR) regimes[26]. The focus of this contribution is on the well-developed understanding of NT and QCE
plasmas.Where the paper says it
[39] A. O. Nelson, et al. Robust Avoidance of Edge-Localized Modes alongside Gradient Formation in the Negative Triangularity Tokamak Edge. p. 2 The physics of ELM-free regimes in EUROfusion tokamaks 3
Figure 1. Schematic of Type-I ELM avoidance for QCE (green) and NT (blue)
plasmas vs an ELMy H-mode (red) in a j-α diagram where j is the peak edge current
density and α is the normalised pressure gradient.Where the paper says it
[40] L. Radovanovic, et al. Developing a physics understanding of the quasi-continuous exhaust regime: Pedestal profile and ballooning stability analysis. p. 7 These experiments
have, however, shown that robust ELM avoidance can be obtained in a large device,
at substantial levels of heating power, and that the shaping required for this can be
predicted in advance via only the engineering parameters (current, field, and plasma
shape), building confidence in our ability to design NT ELM-avoidance scenarios in
future devices. Separatrix ballooning modes: the quasi-continuous exhaust regime
The quasi-continuous exhaust regime is a regime which, in contrast to NT, is operated at
high positive plasma shaping.Where the paper says it
[41] M. Griener, et al. Continuous observation of filaments from the confined region to the far scrape-off layer.
[42] B. Vanovac, et al. Pedestal properties of negative triangularity discharges in ASDEX Upgrade. p. 4 Similar experiments
were performed for the AUG discharges, also showing robust H-mode avoidance. H-mode avoidance via NT in AUG
New negative-triangularity experiments, motivated by advances in prediction, were
performed in ASDEX Upgrade during the 2025 campaign; the full details of the
shape development, modelling, and plasma performance will be detailed in a separate
publication[44].Where the paper says it
[43] O. Sauter et al. Negative triangularity tokamak operation in TCV, IAEA FEC 2023. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[45] O. Sauter, et al. Improved Confinement with Negative Triangularity in L-mode Plasmas in JET. p. 3 Access to the QCE is linked
to keeping access to second-stability open in the middle of the pedestal and an unstable
ballooning mode localised at the pedestal foot[15, 41, 31], independently of the structure
of the rest of the pedestal (which may tend towards low-, medium-, or high-n modes). Second stability access: negative triangularity
The flexible shaping capabilities of TCV have helped drive the understanding of the
separate elements of ELM-avoidance and confinement improvement in NT.Where the paper says it
[46] O. Sauter et al. Negative triangularity experiments in JET. p. 1 The manuscript is structured as follows: an introduction to a simple conceptual
model of ELM-avoidance is presented, along with the tools which are used for modelling. The progress in developing ELM-free negative triangularity scenarios on ASDEX
Upgrade and JET, following detailed experiments at TCV will be mentioned.Where the paper says it
[47] E. R. Solano, et al. L-H transition studies in tritium and deuterium–tritium campaigns at JET with Be wall and W divertor. p. 0 Fusion 64 112023
♭See the author list of N. Vianello et al, ”Results from the last DD and DT JET
campaigns in the framework of the EUROfusion Tokamak Exploitation Work
Package Activity”, 2026 submitted to Nuclear Fusion
♮See the author list of C.Where the paper says it
[48] M. Faitsch, et al. The quasi-continuous exhaust regime in ASDEX Upgrade and JET. p. 0 The
EUROfusion tokamak exploitation program has therefore made the understanding
of ELM-free regimes a major topic of exploration across all its contributing devices
(ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program
to investigate a range of Type-I ELM-free regimes has been developed covering the
enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT),
quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs
(SE), I-mode, and X-point radiator (XPR) regimes.Where the paper says it
[50] T. Eich, et al. Turbulence driven widening of the near-SOL power width in ASDEX Upgrade H-Mode discharges. p. 4 Similar experiments
were performed for the AUG discharges, also showing robust H-mode avoidance. H-mode avoidance via NT in AUG
New negative-triangularity experiments, motivated by advances in prediction, were
performed in ASDEX Upgrade during the 2025 campaign; the full details of the
shape development, modelling, and plasma performance will be detailed in a separate
publication[44].Where the paper says it
[51] R. L. Miller, et al. p. 9 35
t
)ρs, where αt
is a collisional
broadening parameter and ρs is the poloidal ion Larmor radius; all values are calculated
self-consistently with the physical and magnetic geometry plus the power crossing the
separatrix. This scaling for λp
When comparing the predicted αedge,crit from HELENA and the expected αedge,exp
it should be noted that the definitions are slightly different; HELENA uses the Miller
definition of α[51], while the definition in the previous paragraph is a cylindrical
approximation, with the simplification reflecting available experimental data. A second highlight of the recent JET
ELM-free experiments is the demonstration of both the QCE[18] and XPR[26] regimes
in DT plasmas. The manuscript is structured as follows: an introduction to a simple conceptual
model of ELM-avoidance is presented, along with the tools which are used for modelling.Where the paper says it
Where the paper says it
[52] A. A. Pshenov, et al. SOLPS-ITER simulations of the ITER divertor with improved plasma-facing component geometry. p. 1 The integration of a high performance core with an ELMfree pedestal and relevant divertor physics is quite challenging in present-day machines
owing to the typical requirement of high separatrix density operation, which imposes
known limitations on plasma performance[1, 2, 3]. Instead, the general approach of the
topic is to investigate physics mechanisms in smaller, flexible devices, such as TCV and
ASDEX Upgrade, to validate this understanding on a larger device (typically JET) and
then use the validated physics mechanisms to make predictions for future devices such
as SPARC and ITER.Where the paper says it
[53] P. Maget, et al. MHD stability of the pedestal in ITER scenarios. p. 2 This is sketched in figure 1, using
the well-known j-α depiction for global pedestal stability; above and to the left of the
lines are the unstable region, below and left shows the stable region, where pedestals
are expected prior to large ELM crashes. Figure 1 shows an example stability boundary
and operational point for an ELMy pedestal as the red line, where the transport and
MHD limits coincide[28, 29, 30].Where the paper says it
[54] T. Luda, et al. Effect of the plasma size on pedestal and global confinement and prediction for ITER with IMEP. p. 1 Particular
focus is paid to the performance of the QCE in terms of the achieved pedestal top
values, which, when appropriately normalised, do not differ significantly from ELMy
H-mode plasmas. This, combined with the predicted minimum separatrix density for
the 15 MA ITER baseline plasma, highlight the relevance of the QCE as a potential
operational scenario for both ITER and future reactors.Where the paper says it
[55] A. Kappatou, et al. Overview of the third JET deuterium-tritium campaign. p. 4 Similar experiments
were performed for the AUG discharges, also showing robust H-mode avoidance. H-mode avoidance via NT in AUG
New negative-triangularity experiments, motivated by advances in prediction, were
performed in ASDEX Upgrade during the 2025 campaign; the full details of the
shape development, modelling, and plasma performance will be detailed in a separate
publication[44].Where the paper says it
[56] A. Redl, et al. An extensive analysis of SOL properties in high-d plasmas in ASDEX Upgrade. p. 6 5 MA could be realised within this
single experimental day. While a more detailed analysis of the various discharges will be
presented elsewhere[45, 46], one highlight is presented here in figure 5 as time-traces of
a high-power negative triangularity discharge.Where the paper says it
[57] H. J. Sun, et al. Impact of the plasma boundary on machine operation and the risk mitigation strategy on JET. p. 5 Demonstration of NT ELM-avoidance in JET
A strenuous test of the H-mode avoidance theory was facilitated via the opportunity to
develop and test a negative triangularity scenario on JET. Due to the high-risk nature of
the experiments (both programatically and to the machine), only the final experimental
day was dedicated to this program.Where the paper says it
--- Page 2 ---
The physics of ELM-free regimes in EUROfusion tokamaks 2
highlighted, as well as the progress in developing access models based on ideal-MHD. In the case of the QCE, this can also be expressed as a minimum separatrix density which corresponds well to experimentally measured separatrix densities. p. 1 The physics of ELM-free regimes in EUROfusion tokamaks 2
highlighted, as well as the progress in developing access models based on ideal-MHD. In the case of the QCE, this can also be expressed as a minimum separatrix density,
which corresponds well to experimentally measured separatrix densities. In the case of the QCE, this can also be expressed as a minimum separatrix density,
which corresponds well to experimentally measured separatrix densities. Particular
focus is paid to the performance of the QCE in terms of the achieved pedestal top
values, which, when appropriately normalised, do not differ significantly from ELMy
H-mode plasmas. Particular
focus is paid to the performance of the QCE in terms of the achieved pedestal top
values, which, when appropriately normalised, do not differ significantly from ELMy
H-mode plasmas. This, combined with the predicted minimum separatrix density for
the 15 MA ITER baseline plasma, highlight the relevance of the QCE as a potential
operational scenario for both ITER and future reactors.Where the paper says it
Where the paper says it
Where the paper says it
The QCE regime is accessed at high shaping and high separatrix density. A sufficiently high shaping parameter and a critical separatrix density can be determined from machine parameters are the key requirements. p. 9 2
(1 + δ)
0. 9
) and a critical
separatrix density which can be determined from machine parameters are the key
requirements.Where the paper says it
The QCE access model posits access to the QCE regime at high shaping and high separatrix density. The model described in the previous section posits access to the QCE regime at high shaping and high separatrix density. p. 9 The critical separatrix
density is found at the intersection of both lines, above which one expects access to
the QCE regime. demonstration of the QCE at JET[18, 48], enabled by understanding of the operational
space of the QCE from the separatrix parameters[15, 17] and MHD stability[40, 32];
a sufficiently high shaping parameter (defined as Sd = κ
2.Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved scenario development by integrating predictive modeling with experimental validation across multiple devices. The paper shows that "The stepladder approach within EUROfusion, understanding physics on smaller devices before applying it to larger ones, notably JET, has significantly shortened scenario development time necessary for both QCE and NT demonstration in JET."
-
Enhanced predictive capability for reactor operation by providing a methodology to predict critical shaping requirements. The text states that
Predictions for the minimum shaping for ELM avoidance were made for JET and AUG, taking the restrictions of the PF coil-sets into account.
-
Better evaluation of ITER suitability by establishing concrete density and confinement thresholds based on existing machine data. The authors conclude that
Predictions for the minimum density for QCE access in ITER indicate that the regime should be accessible in ITER, and pedestal predictions made with ideal MHD codes are also expected to apply in the QCE regime in ITER.
-
Improved comparison of transport mechanisms by normalizing plasma performance metrics across different regimes. The paper demonstrates this by noting that
With this normalisation, no difference between ELMy H-mode pedestal top values and those in the QCE regime can be discerned.
-
More robust understanding of filament scaling for reactor environments by contrasting QCE and NT signatures. The system can now analyze that
Filaments are often associated with the QCE, and an open research question is how these filaments will scale to reactors, particularly the energy deposited not only on the divertor but also the first wall.
Abstract
The development of operational scenarios without large Type-I ELMs is of utmost importance for the stable operation and longevity of future tokamaks. The EUROfusion tokamak exploitation program has therefore made the understanding of ELM-free regimes a major topic of exploration across all its contributing devices (ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program to investigate a range of Type-I ELM-free regimes has been developed covering the enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT), quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs (SE), I-mode, and X-point radiator (XPR) regimes. This contribution focuses on the development and understanding of the NT and QCE regimes on ASDEX Upgrade, JET, and TCV. The importance of transport via ballooning modes in both regimes is highlighted, as well as the progress in developing access models based on ideal-MHD. In the case of the QCE, this can also be expressed as a minimum separatrix density, which corresponds well to experimentally measured separatrix densities. Particular focus is paid to the performance of the QCE in terms of the achieved pedestal top values, which, when appropriately normalised, do not differ significantly from ELMy H-mode plasmas. This, combined with the predicted minimum separatrix density for the 15 MA ITER baseline plasma, highlight the relevance of the QCE as a potential operational scenario for both ITER and future reactors.
Related papers
- Implementation and verification of a new free boundary module for Resistive Wall Modes simulations with the nonlinear 3D full MHD code SpeCyl
- System Size Dependence of Collisionless Reconnection Rate
- SPECTRE: A robust solver for 3D equilibria with arbitrary topology
- High-quality electron beam generation from laser wakefield accelerators for driving compact free electron lasers
- Deflation Techniques for Stellarator Equilibrium and Optimization
- Rapid Vacuum Response Calculations for Non-axisymmetric Plasma Geometries