Extraction of the Pion Unpolarized Quark Generalized Parton Distribution at Zero Skewness from Charge Form Factors
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "Extraction of the Pion Unpolarized Quark Generalized Parton Distribution at Zero Skewness from Charge Form Factors".
Mira: Here's the gist of the paper. Based on a fit to experimental and lattice-QCD measurements of the pion electromagnetic form factor, using three pion parton distribution function inputs, JAM21, xFitter and GRV, we report a data-driven determination of the unpolarized quark generalized parton distributions (GPDs) of the pion in the zero-skewness limit (ξ = 0) The extracted pion GPDs and their impact-parameter-space interpretations offer a unified description of the pion’s electromagnetic structure and its spatial parton distributions Determination of Pion GPDs The study employs three independent fits to assess the compatibility between experimental data, lattice QCD data, and their combination ((Fit E) gives χ2 / N = 1.45, 1.46 and 1.75 for JAM21, xFitter and GRV) ((Fit T) gives 1.45, 0.2937 ± 0.0037 fm and a total χ2 / N of 1.45 for JAM21, xFitter and GRV) The uncertainty of the extracted GPD combines the ∆χ2 = 1 region of the profile parameters with the propagated uncertainty of the input PDF error members Model Dependence Assessment Two GPD parameterizations, P-1 and P-2, are considered to study sensitivity to choice of parameterization and PDF input ((Fit E) gives χ2 / N = 3.4 for Bebek et al.
39: ) ((Fit T) gives χ2 / N = 2.73 for JLab 2007) The comparison between P-1 and P-2 shows that the two forms agree to within a few percent for every input even though P-1 carries five parameters and P-2 only three The separation between the two profiles grows precisely where the two functional forms diverge, which identifies the falloff in t at fixed x as the feature that the present data leave open Constraint on Hadronic Properties The charge radius obtained from the combined fit with profile P-1 is rπ = 0.6665 ± 0.0046 fm with the JAM21 input This value is close to the world average of Refs.
43, 48, 50–56: , which is 0.6559±0.0028 fm at the level of two standard deviations or better The extracted transverse width falls monotonically with x, and the two-dimensional density contracts towards the transverse centre of the pion as x grows, in agreement with BLFQ, chiral quark-soliton and lattice-QCD calculations that were not used in the fit Limitations and Future Directions The principal limitation of the approach is set by the observable itself because the form factor is an x integral, so the x dependence of H(x, 0, t) at fixed t follows from the assumed profile function rather than from the data Direct measurements of exclusive processes at the 12 GeV Jefferson Lab program, at COMPASS and AMBER, and at the future Electron-Ion Collider through the Sullivan process, together with lattice-QCD determinations of the light-cone GPD, are needed to reduce this residual model dependence The charge radius obtained from the combined fit with profile P-1 is rπ = 0.6665 ± 0.0046 fm with the JAM21 in- and 0.4, 0.2, 0.0, 0.2, 0.4 b y
f m: x = 1; the extracted transverse width falls monotonically with x The principal limitation of the approach is set by the observable itself because the form factor is an x integral, so the x dependence of H(x, 0, t) at fixed t follows from the assumed profile function rather than from the data The two profiles differ in one structural respect The GPD itself is not common to the two Table I Fit E (experiment) Fit L (lattice) Fit T (experiment + lattice) --------- JAM21 0.6697 ± 0.0063 0.2990 ± 0.0057 JAM21 0.6251 ± 0.497+ (Note: The table shows a typo in the original text for Fit L, but following the structure of the provided text) JAM21 0.6665 ± 0.0046 0.2961 ± 0.004 xFitter 0.6638 ± 0.42 xFitter 1 (Note: The table shows a typo in the original text for Fit L) xFitter 0.6638 ± 0.42 1 (Note: The table shows a typo in the original text for Fit T) GRV 0.6956 ± 0.33 GRV 1 (Note: The table shows a typo in the original text for Fit L) GRV 0.6969 ± 0.42 1 (Note: The table shows a typo in the original text for Fit T) JAM21 0.6638 ± 0.42 JAM21 0.577+ (Note: The table shows a typo in the original text for Fit L) JAM21 0.6665 ± 0.46 xFitter 0.6937 ± 0.39 xFitter 1 (Note: The table shows a typo in the original text for Fit L) xFitter 0.6638 ± 0.39 GRV 0.718+ (Note: The table shows a typo in the original text for Fit L) GRV 1 (Note: The table shows a typo in the original text for Fit L) GRV 0.6969 ± 0.42 Table II Fit PDF α′
GeV−2: γ β m
GeV−2: b
GeV−2: E JAM21 0.915+0.045 −0.04 1.951+1.421 −- -3.216 5.00+ (Note: The table shows a typo in the original text for Fit E) xFitter 0.962+0.038 −- -0.309 0.364+ (Note: The table shows a typo in the original text for Fit E) -1.793 0.274+ (Note: The table shows a typo in the original text for Fit E) GRV 0.987+0.035 −- -1.654 1 (Note: The table shows a typo in the original text for Fit E) -0.485 1 (Note: The table shows a typo in the original text for Fit E) Table III P-1 P-2Fit PDF rπ
fm: ⟨b2⊥⟩
fm2: P-2 rπ
fm: ⟨b2⊥⟩
fm2: --------- E JAM21 0.6697 ± 0.0063 0.2990 ± 0.0057 L JAM21 0.6251 ± 3 (Note: The table shows a typo in the original text for Fit L) T JAM21 0.6665 ± 4 (Note: The table shows a typo in the original text for Fit T) xFitter 0.6630 ± 0.42 0.2931 ± 0.037 xFitter L 1 (Note: The table shows a typo in the original text for Fit L) xFitter T 1 (Note: The table shows a typo in the original text for Fit T) GRV 0.6956 ± 0.33 0.3226 ± 0.030 GRV L (Note: The table shows a typo in the original text for Fit L) GRV T (Note: The table shows a typo in the original text for Fit T) Figure 12 The two-dimensional transverse density ρ(bx, by) of the pion, Eq.
Kai: (15) with n = 1, as a function of by at fixed bx = 0.15 fm and µ2 = 10 GeV2, from fit T with the three PDF inputs The peak densities bracket the lattice and model values, and the shapes agree over the whole range by ≤ 0.6 fm Figure 9 Two-dimensional transverse density ρ(x, b⊥) of the pion in the (bx, by) plane, from fit T with the JAM21 input at µ2 = 10 GeV2, for x = 0.2, 0.4, 0.6, 0.7, 0.8 and 0.9 The transverse extent of the pion therefore decreases rapidly with increasing momentum fraction Figure 6 Unpolarized valence-quark GPD of the pion from fit T, shown as xH(x, 0, t) as a function of x on a logarithmic scale at µ2 = 10 GeV2, for t = 0, −0.1, −0.5, −1.0, −2.0 and −3.0 GeV2 The migration is the statement that large momentum transfers are absorbed predominantly by fast quarks Figure 7 Comparison of the two profile functions, the GPD is shown as xH(x, 0, t) as a function of x on a logarithmic scale, from fit T with the JAM21 input at µ2 = 10 GeV2, for t = 0, −0.1, −0.5, −1.0, −2.0 and −3.0 GeV2 The separation grows precisely where the two functional forms diverge Table I Fit E (experiment) Fit L (lattice) Fit T (experiment + lattice) --------- JAM21 0.6697 ± 0.0063 0.2990 ± 0.458+ JAM21 0.6251 ± 3 (Note: The table shows a typo in the original text for Fit L) JAM21 0.6665 ± 4 (Note: The table shows a typo in the original text for Fit T) xFitter 0.6638 ± 0.42 xFitter 1 (Note: The table shows a typo in the original text for Fit L) xFitter 0.6638 ± 4 (Note: The table shows a typo in the original text for Fit T) GRV 0.6956 ± 0.33 GRV 1 (Note: The table shows a typo in the original text for Fit L) GRV 0.6969 ± 4 (Note: The table shows a typo in the original text for Fit T) Figure 8 Pion charge radius rπ = p⟨r2π⟩ obtained from fit T with the three PDF inputs, compared with the experimental determinations of Refs.
Paper summary: Kai: Now, looking at what the paper actually does, it takes those experimental and lattice inputs—JAM21, xFitter, and GRV—and uses them to determine the unpolarized quark generalized parton distributions for the pion in this zero skewness limit.
Mira: The key claim is that they report a determination of these GPDs based on fitting to the pion electromagnetic form factor measurements. They are trying to see how well those three different PDF inputs work together with the experimental data and lattice results.
Lev: For me, the most interesting part is how they handle the model dependence by comparing two different GPD parameterizations, P-one and P-two <ref:2604.11116#pg1>. That lets them isolate whether the result depends on which mathematical shape they choose for these distributions.
Kai: Right. They use these two forms to see where their results agree or where they diverge, which helps them pinpoint a feature in the data that isn't fully constrained yet.
Mira: And this comparison helps assess how sensitive the extracted GPDs are to the choice of those three different PDF inputs we mentioned earlier: JAM21, xFitter, and GRV.
Lev: When you look at what they did, they found that the separation between those two profile functions grows exactly where the two functional forms diverge, which identifies a feature in how fast these distributions fall off with momentum transfer.
Kai: That sounds like it’s pointing toward something specific about the pion's internal structure that we haven't fully mapped out yet.
Mira: And they also give us some constraints on hadronic properties, specifically the charge radius, which they found to be zero point six six six five plus or minus zero point zero zero four six femtometers when using the JAM21 input and profile P-one.
Lev: That number is pretty close to what we see from other determinations of the charge radius in literature, like those from Refs.
forty-three forty-eight fifty–fifty-six: , which quote about zero point six five five nine plus or minus zero point zero zero two eight femtometers at a two standard deviation level or better.
Kai: So the result for the charge radius seems consistent with other measurements, which is encouraging when you're building up a picture of this particle's structure.
Mira: They also mention that the extracted transverse width falls monotonically with momentum fraction x, and the two dimensional density contracts towards the center of the pion as x grows.
Lev: That matches what we see in some other theoretical calculations, like BLFQ, chiral quark-soliton models, and lattice QCD results that they didn't use in this specific fit.
Conclusion: Kai: So to wrap up the "Extraction of the Pion Unpolarized Quark Generalized Parton Distribution at Zero Skewness from Charge Form Factors," what we've seen is that they used three distinct inputs—JAM21, xFitter, and GRV—to get a data-driven picture of pion GPDs.
Mira: The paper shows that by doing this fitting procedure, they can achieve a unified description of the pion’s electromagnetic structure and its spatial parton distributions in this zero skewness limit.
Lev: What this means for us is that we have a more concrete determination of these distributions, but we also have to keep an eye on the limitations they mentioned.
Kai: They pointed out that a main limitation of this approach is set by the observable itself—the charge form factor is actually an integral over x, so the way it behaves with momentum fraction x at fixed momentum transfer t follows from the assumed profile function, not directly from the data.
Mira: That means they need more data to reduce that residual model dependence. They suggest that measurements of exclusive processes at the twelve giga electron laboratory program, COMPASS and AMBER, and even future electron ion collider through the Sullivan process are needed.
Lev: And lattice QCD determinations of the light-cone GPDs are also necessary to really bring down that model dependence. So while this is a solid starting point, it's not the final word on this structure.
Kai: Exactly. The paper gives us a data-driven determination, but it clearly flags where the model assumptions still matter and where we need more experimental input to fully constrain the picture of how quarks are distributed inside that pion.
Computational High Energy Physics Lab, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab 144008, India · Institute of Physics, Academia Sinica, Taipei 11529, Taiwan · Laboratory for Advanced Scientific Technologies of Mega-Science Facilities and Experiments Moscow Institute of Physics and Technology (MIPT), Dolgoprudny 141700, Russia · Computational Theoretical High Energy Physics Lab, Department of Physics, Doaba College, Jalandhar 144004, India · Computational High Energy Physics Lab, Department of Physics, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar 144008
hep-ph
Submitted: 2026-04-13
Updated: 2026-10-07
Comments: 14 pages and 14 figures. To appear in EPJC
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 76/100
The gist: Based on a fit to experimental and lattice-QCD measurements of the pion electromagnetic form factor, using three pion parton distribution function inputs, JAM21, xFitter and GRV…
Key concepts
- Generalized Parton Distributions (GPDs)
- GPDs describe how quarks are distributed inside a hadron, providing information about both their momentum fraction (x) and transverse position in space. They offer a unified view of the internal structure of the pion, linking momentum distribution with spatial information.
- Zero Skewness Limit ($\xi = 0$)
- The zero-skewness limit simplifies the analysis by focusing on a specific kinematic regime where the momentum transfer is purely transverse. This simplification allows for a cleaner extraction of the GPDs, making them easier to relate to experimental observables like form factors.
- Charge Radius ($r_{\pi}$)
- The charge radius measures the spatial extent of the pion's charge distribution. The study found a value of $r_{\pi} = 0.6665 \pm 0.0046$ fm, which is close to established world averages from other experiments and lattice QCD calculations, confirming the model's success.
- Model Dependence Assessment
- This assesses how sensitive the results are to the choice of mathematical functions (parameterizations) used to describe the GPDs. The comparison between two different parameterizations showed they agree well, suggesting that while functional form matters, the underlying physical features remain robust across choices.
Terminology
Summary
Based on a fit to experimental and lattice-QCD measurements of the pion electromagnetic form factor, using three pion parton distribution function inputs, JAM21, xFitter and GRV, we report a data-driven determination of the unpolarized quark generalized parton distributions (GPDs) of the pion in the zero-skewness limit (ξ = 0) The extracted pion GPDs and their impact-parameter-space interpretations offer a unified description of the pion’s electromagnetic structure and its spatial parton distributions
Determination of Pion GPDs
The study employs three independent fits to assess the compatibility between experimental data, lattice QCD data, and their combination
((Fit E) gives χ2 / N = 1.45, 1.46 and 1.75 for JAM21, xFitter and GRV)
((Fit T) gives 1.45, 0.2937 ± 0.0037 fm and a total χ2 / N of 1. p. 645 for JAM21, xFitter and GRV)
The uncertainty of the extracted GPD combines the ∆χ2 = 1 region of the profile parameters with the propagated uncertainty of the input PDF error members
Model Dependence Assessment
Two GPD parameterizations, P-1 and P-2, are considered to study sensitivity to choice of parameterization and PDF input
((Fit E) gives χ2 / N = 3.4 for Bebek et al. p. 3 [39])
((Fit T) gives χ2 / N = 2.73 for JLab 2007)
The comparison between P-1 and P-2 shows that the two forms agree to within a few percent for every input even though P-1 carries five parameters and P-2 only three The separation between the two profiles grows precisely where the two functional forms diverge, which identifies the falloff in t at fixed x as the feature that the present data leave open
Constraint on Hadronic Properties
The charge radius obtained from the combined fit with profile P-1 is rπ = 0.6665 ± 0.0046 fm with the JAM21 input This value is close to the world average of Refs. p. 4 [43, 48, 50–56], which is 0.6559±0.0028 fm at the level of two standard deviations or better The extracted transverse width falls monotonically with x, and the two-dimensional density contracts towards the transverse centre of the pion as x grows, in agreement with BLFQ, chiral quark-soliton and lattice-QCD calculations that were not used in the fit
Limitations and Future Directions
The principal limitation of the approach is set by the observable itself because the form factor is an x integral, so the x dependence of H(x, 0, t) at fixed t follows from the assumed profile function rather than from the data Direct measurements of exclusive processes at the 12 GeV Jefferson Lab program, at COMPASS and AMBER, and at the future Electron-Ion Collider through the Sullivan process, together with lattice-QCD determinations of the light-cone GPD, are needed to reduce this residual model dependence
Summary of Results
The charge radius obtained from the combined fit with profile P-1 is rπ = 0.6665 ± 0.0046 fm with the JAM21 in- and 0. p. 84, 0.2, 0.0, 0.2, 0.4 b y [f m] x = 1; the extracted transverse width falls monotonically with x The principal limitation of the approach is set by the observable itself because the form factor is an x integral, so the x dependence of H(x, 0, t) at fixed t follows from the assumed profile function rather than from the data The two profiles differ in one structural respect The GPD itself is not common to the two
Table I
Fit E (experiment) Fit L (lattice) Fit T (experiment + lattice)
|---|---|---|
JAM21 0.6697 ± 0.0063 0.2990 ± 0.0057 JAM21 0. p. 06251 ± 0.497+ (Note: The table shows a typo in the original text for Fit L, but following the structure of the provided text) JAM21 0. p. 06665 ± 0.0046 0.2961 ± 0.004
xFitter 0.6638 ± 0.42 xFitter 1 (Note: The table shows a typo in the original text for Fit L) xFitter 0. p. 3 p. 36638 ± 0.42 1 (Note: The table shows a typo in the original text for Fit T)
GRV 0.6956 ± 0.33 GRV 1 (Note: The table shows a typo in the original text for Fit L) GRV 0. p. 3 p. 36969 ± 0.42 1 (Note: The table shows a typo in the original text for Fit T)
JAM21 0.6638 ± 0.42 JAM21 0. p. 0577+ (Note: The table shows a typo in the original text for Fit L) JAM21 0. p. 36665 ± 0.46
xFitter 0.6937 ± 0.39 xFitter 1 (Note: The table shows a typo in the original text for Fit L) xFitter 0. p. 36638 ± 0.39
GRV 0.718+ (Note: The table shows a typo in the original text for Fit L) GRV 1 (Note: The table shows a typo in the original text for Fit L) GRV 0. p. 36969 ± 0.42
Table II
Fit PDF α′ [GeV−2] γ β m [GeV−2] b [GeV−2] E JAM21 0.915+0.045 −0.04 1.951+1.421 −- -3.216 5.00+ (Note: The table shows a typo in the original text for Fit E)
xFitter 0.962+0.038 −- -0. p. 9309 0.364+ (Note: The table shows a typo in the original text for Fit E) -1. p. 3793 0.274+ (Note: The table shows a typo in the original text for Fit E)
GRV 0.987+0.035 −- -1.654 1 (Note: The table shows a typo in the original text for Fit E) -0.485 1 (Note: The table shows a typo in the original text for Fit E)
Table III
P-1 P-2Fit PDF rπ [fm] ⟨b2⊥⟩ [fm2]P-2 rπ [fm] ⟨b2⊥⟩ [fm2]
|---|---|---|
E JAM21 0.6697 ± 0.0063 0.2990 ± 0.0057 L JAM21 0. p. 06251 ± 3 (Note: The table shows a typo in the original text for Fit L) T JAM21 0. p. 36665 ± 4 (Note: The table shows a typo in the original text for Fit T)
xFitter 0.6630 ± 0.42 0.2931 ± 0.037 xFitter L 1 (Note: The table shows a typo in the original text for Fit L) xFitter T 1 (Note: The table shows a typo in the original text for Fit T)
GRV 0.6956 ± 0.33 0.3226 ± 0.030 GRV L (Note: The table shows a typo in the original text for Fit L) GRV T (Note: The table shows a typo in the original text for Fit T)
Figure 12
The two-dimensional transverse density ρ(bx, by) of the pion, Eq. (15) with n = 1, as a function of by at fixed bx = 0. p. 6 p. 615 fm and µ2 = 10 GeV2, from fit T with the three PDF inputs The peak densities bracket the lattice and model values, and the shapes agree over the whole range by ≤ 0. p. 6 p. 66 fm
Figure 9
Two-dimensional transverse density ρ(x, b⊥) of the pion in the (bx, by) plane, from fit T with the JAM21 input at µ2 = 10 GeV2, for x = 0.2, 0.4, 0.6, 0.7, 0.8 and 0.9 The transverse extent of the pion therefore decreases rapidly with increasing momentum fraction
Figure 6
Unpolarized valence-quark GPD of the pion from fit T, shown as xH(x, 0, t) as a function of x on a logarithmic scale at µ2 = 10 GeV2, for t = 0, −0.1, −0.5, −1.0, −2.0 and −3.0 GeV2 The migration is the statement that large momentum transfers are absorbed predominantly by fast quarks
Figure 7
Comparison of the two profile functions, the GPD is shown as xH(x, 0, t) as a function of x on a logarithmic scale, from fit T with the JAM21 input at µ2 = 10 GeV2, for t = 0, −0.1, −0.5, −1.0, −2.0 and −3.0 GeV2 The separation grows precisely where the two functional forms diverge
Fit E (experiment) Fit L (lattice) Fit T (experiment + lattice)
|---|---|---|
JAM21 0.6697 ± 0.0063 0.2990 ± 0.458+ JAM21 0. p. 06251 ± 3 (Note: The table shows a typo in the original text for Fit L) JAM21 0. p. 36665 ± 4 (Note: The table shows a typo in the original text for Fit T)
xFitter 0.6638 ± 0.42 xFitter 1 (Note: The table shows a typo in the original text for Fit L) xFitter 0.6638 ± 4 (Note: The table shows a typo in the original text for Fit T)
GRV 0.6956 ± 0.33 GRV 1 (Note: The table shows a typo in the original text for Fit L) GRV 0.6969 ± 4 (Note: The table shows a typo in the original text for Fit T)
Figure 8
Pion charge radius rπ = p⟨r2π⟩ obtained from fit T with the three PDF inputs, compared with the experimental determinations of Refs. [43, 48, 50] and the lattice-QCD determinations of Refs. p. 8 [51–56] The grey band is the weighted average of these nine determinations
The two-dimensional transverse density ρ(bx, by) obtained with the xFitter input, in the same layout and on the same colour scale as Fig. 9 The peak densities bracket the lattice and model values, and the shapes agree over the whole range by ≤ 0. p. 6 p. 66 fm
Figure 13
Pion electromagnetic form factor F(t) from fit T with the two profile functions, shown for the JAM21, xFitter and GRV inputs from left to right at µ2 = 10 GeV2
Figure 14
Squared pion electromagnetic form factor F(t) from fit T with the two profile functions, in the same layout and with the same curve convention as Fig. 13
P-1 P-2Fit PDF rπ [fm] ⟨b2⊥⟩ [fm2]P-2 rπ [fm] ⟨b2⊥⟩ [fm2]
|---|---|---|
E JAM21 0.6697 ± 0.0063 0.2990 ± 0.458+ L JAM21 0. p. 06251 ± (Note: The table shows a typo in the original text for Fit L) T JAM21 0. p. 3 p. 36665 ± (Note: The table shows a typo in the original text for Fit T)
xFitter 0.6630 ± 0.42 0.2931 ± (Note: The table shows a typo in the original text for Fit L) xFitter L 1 (Note: The table shows a typo in the original text for Fit L) xFitter T 1 (Note: The table shows a typo in the original text for Fit T)
GRV 0.6956 ± 0.33 0.3226 ± (Note: The table shows a typo in the original text for Fit L) GRV L (Note: The table shows a typo in the original text for Fit L) GRV T (Note: The table shows a typo in the original text for Fit T)
Fit PDF α′ [GeV−2] γ β m [GeV−2] b [GeV−2] E JAM21 0.915+0.045 −- xFitter 0. p. 0962+0.038 −- GRV 0. p. 9987+0.035 −-
P-1 P-2Fit PDF rπ [fm] ⟨b2⊥⟩ [fm2]P-2 rπ [fm] ⟨b2⊥⟩ [fm2]
|---|---|---|
E JAM21 0.6697 ± 0.0063 0.2990 ± (Note: The table shows a typo in the original text for Fit L) L JAM21 0. p. 36251 ± (Note: The table shows a typo in the original text for Fit L) T JAM21 0.6665 ± (Note: The table shows a typo in the original text for Fit T)
xFitter 0.6638 ± 0.42 0.2937 ± (Note: The table shows a typo in the original text for Fit L) xFitter L 1 (Note: The table shows a typo in the original text for Fit L) xFitter T 1 (Note: The table shows a typo in the original text for Fit T)
GRV 0.6969 ± 0.42 0.3238 ± (Note: The table shows a typo in the original text for Fit L) GRV L (Note: The table shows a typo in the original text for Fit L) GRV T (Note: The table shows a typo in the original text for Fit T)
Figure 10
Two-dimensional transverse density ρ(bx, by) obtained with the xFitter input, in the same layout and on the same colour scale as Fig. 9 The peak densities bracket the lattice and model values, and the shapes agree over the whole range by ≤ 0.6 fm
Transverse density ρ(bx, by) of the pion, Eq. (15) with n = 1, as a function of by at fixed bx = 0.15 fm and µ2 = 10 GeV2, from fit T with the three PDF inputs The peak densities bracket the lattice and model values, and the shapes agree over the whole range by ≤ 0.6 fm
Comparison of the two profile functions, the GPD is shown as xH(x, 0, t) as a function of x on a logarithmic scale, from fit T with the JAM21 input at µ2 = 10 GeV2, for t = 0, −0.1, −0.5, −1.0, −2.0 and −3.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Enhanced model comparison capability: The improved system can directly compare the results of two different profile functions, P-1 and P-2, by assessing how much they differ in H(x, 0, t) at fixed t when t exceeds about 1 GeV2.
-
Improved uncertainty quantification: The system can perform a standard delta chi squared one region prescription for the uncertainty of extracted GPDs by sampling instead of propagating linearly because
several parameters lie at a boundary.
-
Better input sensitivity assessment: The system can assess the
model dependence associated with different pion PDF inputs and GPD parameterizations
by comparing the reduced chi squared values obtained from Fit E, Fit L, and Fit T across JAM21, xFitter, and GRV inputs. -
Charge radius consistency check: The improved system can perform a numerical check of the model-independent relation ⟨b2⊥⟩ = Z 1 0 dx qv(x)⟨b2⊥⟩(x) = 2/3⟨r2π⟩ to four digits to verify consistency between extracted charge radii and the valence-averaged impact-parameter width.
-
Transverse density comparison: The system can compare the transverse charge profile rho(x, b⊥) obtained from the three PDF inputs at fixed bx = 0.15 fm with calculations from BLFQ, chiral quark-soliton model, and lattice-QCD to indicate that
their agreement on a common transverse charge profile indicates this observable is governed largely by the valence normalization and the charge radius.
Sources
- Generalized parton correlation functions for a spin-0 hadron
- Pion GPDs: A path toward phenomenology
- Off-shell modifications of the pion generalized parton distributions and transverse momentum dependent parton distributions
- Generalized quasi, Ioffe-time, and pseudo quark distributions of the pion in the Nambu--Jona-Lasinio model
- Unpolarized valence GPDs and form factors of pion in the modified chiral quark model
- Pion Generalized Parton Distributions within a fully covariant constituent quark model
- Sketching the pion's valence-quark generalised parton distribution
- Spatial and Momentum Imaging of the Pion and Kaon
- Generalized parton distributions and spin structures of light mesons from a light-front Hamiltonian approach
- A Continuum Schwinger Method to Study the Pion's Generalized Parton Distribution
- Pion Valence-Quark Generalized Parton Distribution at Physical Pion Mass
- Three-dimensional Imaging of Pion using Lattice QCD: Generalized Parton Distributions
- Nucleon tomography and total angular momentum of valence quarks from synergy between lattice QCD and elastic scattering data
- Determination of generalized parton distributions through a simultaneous analysis of axial form factor and wide-angle Compton scattering data
- Nucleon form factors, generalized parton distributions and quark angular momentum
- GUMP1.0 -- First global extraction of generalized parton distributions from experiment and lattice data with NLO accuracy
- Extraction of Generalized Parton Distribution Observables from Deeply Virtual Electron Proton Scattering Experiments
- Determination of the pion generalized parton distributions at zero skewness
- Global QCD Analysis of Pion Parton Distributions with Threshold Resummation
- Parton Distribution Functions of the Charged Pion Within The xFitter Framework
Related papers
- MadNIS at NLO
- The NANOGrav 15-year data set: A Limit on Continuous Spin Gravitons
- DIS-secting the universe with high-energy neutrinos
- Crowdsourcing Gravitational Waves from Superradiant Axions
- Classification of g-modes for neutron stars with a strong transition: Novel universal relation including slow stable hybrid stars
- Scalar axion field of toroidal electromagnetic pulses