Movable Antenna for Anti-Jamming Transmission: Continuous and Discrete Positioning Designs

arXiv:2604.10897 · eess.SP · Submitted 2026-04-13 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: I'm Rosa.

Dev: And I'm Dev, here with Taro.

Rosa: We're looking at the paper: "Movable Antenna for Anti-Jamming Transmission".

Title and authors: Rosa: So we're looking at this paper, "Movable Antenna for Anti-Jamming Transmission: Continuous and Discrete Positioning Designs," by Guo, Luo, Wang, and Xu. It’s about how you can optimize both the beamforming weights and the physical positions of an antenna in a fluid antenna system to fight jamming signals better.

Dev: It’s interesting because they're tackling this joint optimization problem under constraints like quality of service and transmit power limits when jammers are present, even if their channel information is imperfect.

Taro: That sounds complex because you’ve got continuous and discrete design choices to make at the same time, which usually makes things really hard for the optimization process.

Rosa: Exactly. The paper sets up two totally different ways to approach this: a continuous design framework and a discrete design framework. They use an alternating optimization method for the continuous part, which involves successive convex approximation and majorization minimization to handle that non-convex problem.

Dev: And for the discrete part, they’ve completely rephrased it as a sparse recovery task using both the minimum mean squared error criterion and majorization minimization. This is a big step because it lets them do joint optimization instead of just alternating updates.

Taro: So, when they move to the discrete approach, they discretize that continuous movement region into candidate positions with some spacing D, which turns the original problem into one where binary selection matrices B and C k denote which grid points are chosen.

Rosa: Right. And then for solving that discrete joint optimization, they propose a low-complexity block coordinate descent method augmented with RLS-SOMP to handle it. They’re trying to get both the beamforming weights and the antenna positions optimized together in this new way, instead of just switching back and forth between them.

Dev: The results they show are pretty compelling. Numerically, their proposed discrete design outperforms the state-of-the-art benchmark by about ten percent and surpasses their own continuous scheme by roughly fifteen percent under high jamming power conditions.

Taro: That jump in performance is what's really telling because it means the discrete scheme manages to bypass those poor local optimum traps that plague other methods, even when the jamming power gets pretty intense.

Rosa: It also suggests that this discrete design forms beams that are more focused toward where they want them and can suppress interference and jamming signals more effectively because of how precise their spatial response is.

Dev: They also noted a key trade-off in their analysis: while the discrete design maintains a significant performance advantage under severe jamming and imperfect channel state information, its degradation rate against increasing channel uncertainty is slightly steeper than that of the highly robust continuous design.

Title and authors: Taro: So, it’s not perfectly robust against every single thing; if the environment gets even more unpredictable, the continuous version might hold up a little better in terms of how fast it drops off.

Rosa: The core idea they push here is that by trading some spatial resolution for mathematical tractability—making it simpler to solve—the discrete joint optimization paradigm really overcomes a performance bottleneck found in those alternating optimization schemes for continuous designs.

Dev: It’s about unlocking that joint optimization capability, fully exploiting the flexible beamforming potential of the fluid antenna system to get higher precision in how they align their beams spatially.

Taro: When you look at what this does for real-world deployment, it means you can use a simpler, discrete setup while still getting near the performance level of a much more complicated continuous system when jamming is severe.

Rosa: So, to wrap up this discussion on "Movable Antenna for Anti-Jamming Transmission: Continuous and Discrete Positioning Designs," the paper shows that by moving from continuous design to discrete design via sparse recovery, they solve that joint optimization problem in a way that actually performs better in complex anti-jamming scenarios.

Dev: It seems like the main implication is that this discrete framework offers a strong performance advantage under severe jamming and imperfect channel state information, even if there’s a slight difference when channel uncertainty grows.

Taro: I just think it's cool that they managed to solve the problem of joint optimization by transforming it into a sparse recovery task, which is what really unlocks the potential for both beamforming and position at once.

Rosa: Yeah, so we’ve seen how this discrete design achieves better sum rate performance and forms more focused beams compared to what we saw in previous work on continuous designs.

Dev: We also saw the comparison between the two frameworks, where the discrete scheme beats the continuous one under high jamming power, which is a solid result for practical anti-jamming systems.

Taro: I just think it shows that trading some smoothness for structure can actually lead to better practical performance in these kinds of constrained wireless systems.

Rosa: That's what we’re hearing about the paper, "Movable Antenna for Anti-Jamming Transmission: Continuous and Discrete Positioning Designs." It’s a solid piece of work exploring how to make those complex fluid antenna systems more effective against jammers by using this dual continuous and discrete optimization approach.

Dev: We hope this discussion gives you a clear picture of what they found regarding the performance gains and the trade-offs they identified between these two design paths.

Taro: Yeah, for anyone building a system, it tells you that even if you can't run the continuous optimization loop perfectly in real time, there’s a structured way to get near optimal performance with this discrete method.

The paper's summary: Rosa: So, to wrap up what we just heard about this paper on fluid antennas for anti-jamming: they basically put out two ways to do things—a continuous one and a discrete one—to find the best way to position an antenna when there's jamming happening and you have limits on how much power you can use.

Dev: Right, so it’s about optimizing the shape of that antenna, both how it moves smoothly in space and where you place the physical spots on a grid. They tackle this using a framework that handles the continuous movement with alternating optimization, which is pretty heavy mathematically.

Taro: And then for the discrete case, they take a different angle. They turn it into a sparse recovery problem using something called majorization minimization to let both beamforming and position optimize together instead of just switching back and forth between them.

Rosa: The main result they show is that this discrete method beats the previous best methods by about ten percent and surpasses their own continuous method by fifteen percent when the jamming power is high. That’s a pretty solid jump for real-world performance under those tough conditions.

Dev: And what I'm looking at is that this performance gain comes from how they handle those local traps in the optimization process, specifically because of that sparse recovery formulation they introduced earlier. It lets them find a better solution overall when the problem gets really messy with jamming signals.

Taro: They also say it helps form beams that are more focused toward where you actually want them and can cut down on interference and jamming signals because their spatial response is much more precise in this discrete setup. I like that part about the precision of the spatial response.

Rosa: But there’s a caveat they mention too, which is important for us when we think about testing this outside the lab. They say that while it maintains a good performance advantage against severe jamming and imperfect channel information, it actually degrades a little faster than their more continuous design when the channel itself becomes even less certain.

Dev: So, it’s not perfectly invincible under every single possible bad condition; if the environment gets incredibly unpredictable, the continuous method might actually hold up better in terms of how fast its performance drops off. That’s a key trade-off they highlight.

Taro: It really shows that by trading some smoothness for a structured approach, which is what the discrete method does, you can actually get better practical results in these complicated anti-jamming scenarios than relying only on the smooth continuous optimization loop.

Rosa: So, the big picture here is that this discrete joint optimization unlocks a way to fully use the flexible beamforming potential of a fluid antenna system to get higher precision spatial alignment without getting stuck in those difficult local optima traps.

Dev: Yeah, it’s about unlocking that ability to optimize both the physical placement and the signal shaping at the same time in a way that's more robust under real-world jamming.

Taro: It really points toward a future where we can use simpler, discrete hardware configurations while still getting near optimal performance for anti-jamming, even when things are tough out there.

Rosa: That’s what we were hearing about this paper on movable antennas for anti-jamming transmission—a solid piece of work exploring how to make those fluid antenna systems more effective against jammers by using this dual continuous and discrete optimization approach. Now, let’s look at how they actually set up their experiments and see if these gains hold up when we push the system outside of a perfectly controlled simulation environment.

The paper's improvements: Taro: So, we've talked about how they set up their two optimization paths—the continuous one and the discrete one—and now let's look at what they suggest to actually improve it further or what their overall findings mean for deploying this tech.

Rosa: Okay, so the paper suggests that the way they handle those discrete positions could be even more integrated with the beamforming part. They propose using a low-complexity block coordinate descent method combined with something called RLS-SOMP to solve problem twenty-four directly.

Dev: That's interesting because right now they use alternating optimization for the continuous case, but this new suggestion is about achieving joint optimization between both the beamforming weights and the antenna positions in one go, using that block coordinate descent approach. It’s a way to get rid of those sequential updates.

Taro: And I think that makes sense because if you can optimize them together rather than switching back and forth, you’re less likely to get stuck in those bad local optimum traps we talked about earlier when the jamming gets really intense.

Rosa: Exactly, so the implication here is that for anyone building a real-time system, this RLS-SOMP augmented block coordinate descent approach could be a much more practical way to run things than what they showed in their original study. It’s about making the solution process itself faster and more integrated.

Dev: From an engineering standpoint, I care about the loop rate here. If this new method is low-complexity, it should allow for faster iteration in real-time scenarios, which is crucial when you need to adapt your antenna positions quickly to a moving jammer. The safety case there would be that we have a more efficient way to reach a good solution within our time constraints.

Taro: And what it changes for me as an autonomy researcher is that if the system can handle this joint optimization well, it means the physical positioning decisions are tighter and more informed by the jamming environment in real-time. It’s not just about maximizing rate; it’s about making sure the physical setup is optimally aware of what's happening spatially.

Rosa: So, to summarize, they’re pushing for a more integrated solution method that combines sparse recovery with block coordinate descent to get that joint optimization working smoothly across both continuous and discrete designs. It suggests a path forward for making this system usable in live anti-jamming networks rather than just theoretical simulations.

Dev: Right, and we need to keep watching how they test this new framework under those severe jamming scenarios—I want to see if that performance boost holds up when the uncertainty in the channel state information gets really high. That’s where we need a robust safety case.

Taro: I agree, it’s about testing those failure modes outside of the clean simulation environment. We need to see how gracefully this new joint optimization handles when things go completely sideways for the jammer and our system.

Rosa: Yeah, so next up, we're going to look at a comparison with another paper on similar topics, or maybe we can talk about how this relates to other work in the field that deals with dynamic antenna placement.

Conclusion: Rosa: So we’ve covered how they tackled both continuous and discrete antenna positioning for anti-jamming using alternating optimization and sparse recovery methods in that paper, "Movable Antenna for Anti-Jamming Transmission: Continuous and Discrete Positioning Designs."

Dev: Basically, the main point is that by moving to a discrete joint optimization framework using block coordinate descent augmented with RLS-SOMP, you can get better performance than the continuous approach under high jamming power.

Taro: I think what this means for us in autonomy research is that we have a solid path to design systems where the physical placement decisions are tightly coupled with the beamforming weights, which is a big deal for graceful recovery when things go wrong.

Rosa: Right, and while they showed it performs well against severe jamming and imperfect channel information, they did flag that its performance drops slightly faster than their continuous design when the uncertainty in the channel state information gets really high.

Dev: That's the caveat we have to keep in mind for our safety case—if the environment becomes even more unpredictable than what’s modeled, that continuous scheme might actually be a bit more stable in terms of how fast it degrades.

Taro: I just think this framework is important because it shows that trading some smoothness for a structured approach can lead to better practical performance in these kinds of constrained wireless systems when we need to fight jamming.

Rosa: So, the big picture here is that this paper on movable antenna for anti-jamming transmission provides a way to unlock joint optimization, letting us fully exploit the flexible beamforming potential of fluid antennas without getting stuck in those local optima traps.

Dev: It really shows how important it is to look at these combined problems instead of just optimizing the beamforming weights or just optimizing the antenna position separately.

Taro: And for future work, I think we should really test that low-complexity block coordinate descent idea on some of those more chaotic, real-world failure modes we've been looking at.

Rosa: Yeah, next time we’ll look at how this contrasts with other works in the field dealing with dynamic antenna placement and see if their results align with what we see in the lab trials.

Dev: We’ll be talking more about how this moves beyond just the optimization part and into the actual hardware implementation details, so stick around.

National University of Defense Technology

eess.SP

Submitted: 2026-04-13

Updated: 2026-11-16

Code: https://github.com/mistybeep/QoS-Aware-FAS-Anti-Jamming

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 81/100

The gist: This paper investigates the joint optimization of beamforming and antenna positions in fluid antenna system (FAS)-aided anti-jamming communications to maximize worst-case sum-rate under…

Key concepts

Fluid Antenna System (FAS)
A system where the antenna's physical location can move continuously in space. This flexibility allows the system to adapt its spatial response dynamically to counter jamming signals and improve communication quality by changing its direction without needing mechanical movement.
Alternating Optimization (AO)
A method used for continuous antenna design that updates the beamforming and antenna position variables sequentially while keeping the other variable fixed. It uses techniques like majorization minimization to handle the problem's non-convex nature, aiming to find a good solution iteratively.
Sparse Recovery Task
The discrete optimization method reformulates the complex antenna placement problem into finding a sparse set of grid points. This transformation simplifies the search for optimal positions by treating it as a sparse recovery problem, which helps in achieving joint optimization of beamforming and position.

Terminology

Summary

This paper investigates the joint optimization of beamforming and antenna positions in fluid antenna system (FAS)-aided anti-jamming communications to maximize worst-case sum-rate under quality-of-service and transmit power constraintsThe goal is to maximize the worst-case sum-rate under quality-of-service and transmit power constraintsWe assume that the jammers adopt omnidirectional single antenna to impair the users’ signal receptions from all anglesyk = vHk Hk(T, Rk)x + XR r=1 gr,k(Rk)xJ r + nk where x = PK i=1 wks i is the transmit signal at the BS. p. 0

Continuous Optimization Framework

For continuous antenna position design, an alternating optimization (AO) framework is developed that integrates successive convex approximation and majorization minimization (MM) to handle the highly non-convex problem For continuous design, we propose an alternating optimization (AO) framework that integrates successive convex approximation and majorization minimization (MM) to handle the highly non-convex problem. This framework involves sequentially updating each variable block while keeping the others fixed, leveraging MMSE criterion, Dinkelbach’s method, SCA, and the MM framework as appropriate

Discrete Optimization Framework

The discrete design is reformulated as a sparse recovery task based on the MMSE criterion and MM to achieve joint optimization rather than AO This involves discretizing the continuous antenna moving region into candidate positions with spacing D, transforming problem (8) into a problem where binary selection matrices B and C k denote the selection of grid points A low-complexity block coordinate descent (BCD) approach augmented with RLS-SOMP is proposed for this joint optimization of beamforming and discrete antenna position design

Performance Analysis and Comparison

Numerical results demonstrate that the proposed discrete design algorithm outperforms the state-of-the-art benchmark by 10% and surpasses the continuous scheme by approximately 15% under high jamming power conditions The discrete scheme achieves better sum rate performance in simulated scenarios by effectively bypassing poor local optimum traps and efficiently utilizing extended spatial degrees-of-freedom Furthermore, the proposed discrete design forms more focused beams toward desired directions while effectively suppressing multiuser interference and jamming signals through more precise spatial responses

Robustness under Uncertainty

The proposed discrete design maintains a significant performance advantage under severe jamming and imperfect CSI, although its degradation rate against increasing channel uncertainty is slightly steeper than that of the highly robust proposed continuous design The discrete framework effectively circumvents poor local optima through its greedy design This joint optimization capability unlocks joint optimization, fully exploiting the flexible beamforming potential of FAS to achieve higher-precision spatial alignment.

Conclusion

The paper develops two distinct optimization frameworks for continuous and discrete antenna position designs in robust FAS-assisted anti-jamming communications The results reveal that by trading spatial resolution for mathematical tractability, the proposed discrete joint optimization paradigm significantly overcomes the performance bottleneck of AO-based continuous schemes in complex anti-jamming scenarios. The discrete design maintains a significant performance advantage under severe jamming and imperfect CSI, demonstrating the framework’s superior performance in FAS-assisted anti-jamming communication networks

Pruning redundant reasoning tokens

The paper investigates the joint optimization of beamforming and antenna positions in fluid antenna system (FAS)-aided anti-jamming communications to maximize worst-case sum-rate under quality-of-service and transmit power constraints The goal is to maximize the worst-case sum-rate under quality-of-service and transmit power constraints.

How the training signal is built

The continuous design relies on AO to iteratively update antenna position and beamforming, while the discrete design achieves joint optimization of both by reconstructing the original problem into a sparse recovery task The continuous formulation is inherently non-convex and thus necessitates AO.

Where the gains come from

The superiority of the discrete design stems from its sparse recovery formulation which effectively circumvents severe local optima This transformation allows for joint optimization of beamforming and antenna position The discrete grid transforms the position design into a sparse recovery problem, unlocking joint optimization.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Discrete joint optimization for beamforming and antenna positions can be implemented using a low-complexity block coordinate descent approach augmented with RLS-SOMP to solve problem (24), enabling joint optimization rather than alternating optimization.

  2. The improved system can outperform the state-of-the-art benchmark by 10% and surpass the continuous scheme by approximately 15% under high jamming power conditions due to circumventing poor local optima through sparse recovery.

  3. The system can form more focused beams toward desired directions while effectively suppressing multiuser interference and jamming signals through more precise spatial responses, as shown in Fig. 4.

  4. The system can maintain a significant performance advantage under severe jamming and imperfect CSI, although its degradation rate against increasing channel uncertainty is slightly steeper than that of the highly robust proposed continuous design.

Related papers