What can galaxy clustering really tell us about the galaxy-halo connections?

arXiv:2604.05561 · astro-ph.GA · Submitted 2026-04-07 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.

Vera: We're looking at the paper: "What can galaxy clustering really tell us about the galaxy-halo connections?".

Jocelyn: Here's the gist of the paper. Subhalo abundance matching (SHAM) is a commonly used framework for modeling the galaxy–halo connection, yet its standard implementation has difficulty reproducing the observed galaxy clustering with high accuracy.

Vera: To overcome this issue, the authors propose a novel CS-SHAM framework where central and satellite galaxies are independently matched to main and satellite subhalos in simulations.

Jocelyn: This new approach introduces three free parameters to explicitly characterize the satellite fraction, fsat, as a function of stellar mass or absolute magnitude.

Vera: The study demonstrates that CS-SHAM reliably reproduces galaxy clustering whether Mpeak or Vpeak is used as the subhalo mass proxy.

Paper summary: Vera: To get into specifics on what this paper is actually doing, it starts by saying that standard Subhalo Abundance Matching or SHAM has trouble accurately reproducing the observed galaxy clustering.

Jocelyn: So, they are proposing a novel CS-SHAM framework where central and satellite galaxies are matched independently to main and satellite subhalos within simulations.

Subrahmanyan: This new setup introduces three free parameters specifically designed to explicitly characterize the satellite fraction as it depends on stellar mass or absolute magnitude.

Vera: The authors then show that this CS-SHAM approach successfully reproduces galaxy clustering when testing against mock galaxy catalogs built from the Jiutian simulation, as well as against a semi-analytic catalog and a hydrodynamical simulation like TNG300.

Jocelyn: One key finding is that they found this method works consistently whether you use the peak mass or the peak velocity to define what constitutes a subhalo mass proxy.

Subrahmanyan: They also demonstrate that within their CS-SHAM framework, they can accurately recover both the halo occupation distribution and the conditional luminosity or stellar mass function when testing against these various samples.

Vera: The paper is really focused on showing that galaxy clustering provides constraints on these functions primarily in halos that are more massive than log Mh around twelve point nine.

Jocelyn: It seems like the central thesis is that galaxy clustering data can tell us a lot about the galaxy-halo connection, provided you use this more detailed matching framework.

Subrahmanyan: They argue that the ability to recover these functions with only four model parameters offers valuable constraints on how galaxies populate those massive structures in the universe.

Conclusion: Vera: So, looking at the title of this work, "What can galaxy clustering really tell us about the galaxy-halo connections?", it seems like they're asking a big question about what we can learn from just galaxy clustering measurements.

Jocelyn: And their conclusion is that within their CS-SHAM framework, using just four free parameters, you can faithfully reproduce both the conditional luminosity function and the conditional stellar mass function in halos larger than log Mh around twelve point nine.

Subrahmanyan: That means they've shown that galaxy clustering alone has a direct link to these galaxy populations in massive halos under their model assumptions.

Vera: And they suggest that to get the tightest possible constraints on those functions, you need to use a suitable mass indicator and match it with its corresponding true satellite fraction curve.

Jocelyn: That approach gives you the best constraints on both the halo occupation distribution and the conditional luminosity function in massive halos.

Subrahmanyan: And they also mention that this CS-SHAM model can be extended to include parameters for galaxy assembly bias and orphan galaxies to add even more flexibility to modeling how galaxies connect to their host halos.

Shanghai Key Lab for Astrophysics, Shanghai Normal University · State Key Laboratory of Dark Matter Physics, Tsung-Dao Lee Institute & School of Physics and Astronomy, Shanghai Jiao Tong University · Shanghai Key Laboratory for Particle Physics and Cosmology, and Key Laboratory for Particle Physics, Astrophysics and Cosmology

astro-ph.GA

Submitted: 2026-04-07

Updated: 2026-04-07

Comments: 20 pages, 15 figures, accepted by SCPMA

Journal ref: Sci. China Phys. Mech. Astron. 69, 289811 (2026)

DOI: 10.1007/s11433-026-2969-0

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 85/100

The gist: Subhalo abundance matching (SHAM) is a commonly used framework for modeling the galaxy–halo connection…

Key concepts

Subhalo Abundance Matching (SHAM)
A standard framework used to model how many galaxies reside in dark matter subhalos based on their mass. However, the authors found this standard method struggles to accurately reproduce observed galaxy clustering.
CS-SHAM Framework
A novel approach where central and satellite galaxies are matched independently to main and satellite subhalos. It introduces a free parameter, fsat, which explicitly models how the satellite fraction changes based on a galaxy's stellar mass or luminosity.
Satellite Fraction (fsat)
This is a new free parameter in CS-SHAM that describes the proportion of galaxies that are satellites within a subhalo. By allowing fsat to vary with stellar mass, the model gains flexibility to match observed clustering across different galaxy populations.
Halo Occupation Distribution (HOD)
The HOD describes how many galaxies of a certain type occupy halos of a given mass. The CS-SHAM framework shows that galaxy clustering data provides tight constraints on this distribution, especially in massive halos.

Terminology

Summary

Subhalo abundance matching (SHAM) is a commonly used framework for modeling the galaxy–halo connection, yet its standard implementation has difficulty reproducing the observed galaxy clustering with high accuracy. p. 0

Where the paper says it

Xiaoju Xu1,2* , Xiaohu Yang2,3* , Zhongxu Zhai2,3, Yiyang Guo2,3, Yizhou Gu2,3 , Yirong Wang2,3, Jiaxin Han2,3, Zhenlin Tan2,3, and Junde Li2,3 1Shanghai Key Lab for Astrophysics, Shanghai Normal University, Shanghai 200234, People’s Republic of China; 2State Key Laboratory of Dark Matter Physics, Tsung-Dao Lee Institute & School of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 201210, China; 3Shanghai Key Laboratory for Particle Physics and Cosmology, and Key Laboratory for Particle Physics, Astrophysics and Cosmology, Ministry of Education, Shanghai Jiao Tong University, Shanghai 200240, China Received XXX; accepted XXX Subhalo abundance matching (SHAM) is a commonly used framework for modeling the galaxy–halo connection. Yet, its standard implementation has difficulty reproducing the observed galaxy clustering with high accuracy (e.

To overcome this issue, the authors propose a novel CS-SHAM framework where central and satellite galaxies are independently matched to main and satellite subhalos in simulations. p. 0
Where the paper says it

, χ 2 /dof ∼ 1). To overcome this issue, we propose a novel CS-SHAM framework, in which central and satellite galaxies are independently matched to main and satellite subhalos in simulations.

This new approach introduces three free parameters to explicitly characterize the satellite fraction, fsat, as a function of stellar mass or absolute magnitude. p. 0
Where the paper says it

To overcome this issue, we propose a novel CS-SHAM framework, in which central and satellite galaxies are independently matched to main and satellite subhalos in simulations. Within this scheme, we introduce three free parameters to explicitly characterize the satellite fraction, fsat, as a function of stellar mass or absolute magnitude.

The study demonstrates that CS-SHAM reliably reproduces galaxy clustering whether Mpeak or Vpeak is used as the subhalo mass proxy. p. 0
Where the paper says it

To evaluate the performance of CS-SHAM, we apply it to two sets of mock galaxy catalogs built with the conventional SHAM method but using different subhalo mass proxies, Mpeak and Vpeak, as well as two additional galaxy samples generated from a SAM and from TNG-300. We demonstrate that CS-SHAM reliably reproduces galaxy clustering whether Mpeak or Vpeak is used as the subhalo mass proxy.

Furthermore, they find that galaxy clustering constrains the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) primarily for relatively massive halos. p. 0
Where the paper says it

Indeed, within the CS-SHAM framework the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) are accurately recovered. Furthermore, we demonstrate for the first time that galaxy clustering constrains the HOD and CLF/CSMF primarily for relatively massive halos.

Framework Development

The CS-SHAM framework is designed to address the limitations of standard SHAM by independently matching central and satellite galaxies to main and satellite subhalos. The core innovation involves introducing the free parameter fsat to explicitly characterize the satellite fraction as a function of stellar mass or absolute magnitude. p. 0

Where the paper says it

To overcome this issue, we propose a novel CS-SHAM framework, in which central and satellite galaxies are independently matched to main and satellite subhalos in simulations. Within this scheme, we introduce three free parameters to explicitly characterize the satellite fraction, fsat, as a function of stellar mass or absolute magnitude.

This allows for flexibility in matching observed galaxy clustering across different luminosity and stellar mass bins. p. 1
Where the paper says it

Indeed, similar treatments of the satellite fraction have been adopted in several recent studies of ELG galaxy clustering [62-65], employing either a constant or halo-mass-dependent fsat. Since galaxy clustering is typically measured in bins of observed luminosity or stellar mass, we explicitly parametrize the satellite fraction as a function of galaxy stellar mass or absolute magnitude, thereby capturing how clustering depends on stellar mass or luminosity.

The authors parameterize fsat using an error function to describe the satellite fraction as a function of stellar mass or luminosity. p. 3
Where the paper says it

This behavior aligns with the result of [81], where the satellite fraction is inferred from a group catalog [94] based on both photomatric redshift and spectropic redshift from DESI Legacy Surveys DR9. In this work, we focus only on the bright regime (Mz < −18) and parameterize fsat in this range using an error function: fsat(Mz) = f1 · erf[(Mz − f2) · f3] + f1 (1) where f1 marks half the amplitude of fsat, and f2 is the characteristic magnitude where fsat(f2) = f1, and f3 quantifies the width of fsat compared to an standard error function.

Model Validation and Performance

The model was tested against three sets of mock galaxy catalogs: two Jiutian mocks built with basic SHAM using Mpeak and Vpeak proxies, one semi-analytic galaxy catalog (SAM), and one hydrodynamical simulation (TNG-300). The authors show that CS-SHAM reliably reproduces galaxy clustering whether Mpeak or Vpeak is used as the subhalo mass proxy across these different samples. p. 0

Where the paper says it

To evaluate the performance of CS-SHAM, we apply it to two sets of mock galaxy catalogs built with the conventional SHAM method but using different subhalo mass proxies, Mpeak and Vpeak, as well as two additional galaxy samples generated from a SAM and from TNG-300. We demonstrate that CS-SHAM reliably reproduces galaxy clustering whether Mpeak or Vpeak is used as the subhalo mass proxy.

They also demonstrate that within the CS-SHAM framework, the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) are accurately recovered. p. 0
Where the paper says it

Indeed, within the CS-SHAM framework the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) are accurately recovered. Furthermore, we demonstrate for the first time that galaxy clustering constrains the HOD and CLF/CSMF primarily for relatively massive halos.

Parameter Sensitivity and Constraints

The performance of the model is highly sensitive to the choice of subhalo mass indicator, as evidenced by how different indicators affect the inferred fsat. While alternative mass indicators do not always recover the true fsat, HOD and CLF/CSMF can still be tightly constrained, especially in massive halos. p. 0

Where the paper says it

Indeed, within the CS-SHAM framework the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) are accurately recovered. Furthermore, we demonstrate for the first time that galaxy clustering constrains the HOD and CLF/CSMF primarily for relatively massive halos.

The results show that for a mock built using a particular mass indicator, fitting galaxy clustering in different luminosity and stellar mass bins with a model based on that same indicator can accurately recover fsat and, in turn, the halo occupation distribution and conditional luminosity function. p. 0
Where the paper says it

We also find that the models are unable to place robust constraints on fsat if different mass proxies are employed. Indeed, within the CS-SHAM framework the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) are accurately recovered.

Conclusion and Future Directions

The study concludes that within the CS-SHAM framework with four free parameters—regardless of whether it is implemented with an Mpeak or a Vpeak model—galaxy clustering alone can faithfully reproduce both the CLFs and CSMFs in halos more massive than log Mh ∼ 12.9. The authors suggest that only by pairing a suitable mass indicator with its corresponding true fsat curve can one obtain the tightest constraints on clustering, as well as on the HOD and CLF. p. 1

Where the paper says it

In line with the fundamental idea of HOD/CLF models, the strength of galaxy clustering is highly sensitive to the abundance of satellite galaxies. In the limiting cases, fsat = 1 leads to the strongest clustering signal, whereas fsat = 0 results in the weakest one [44].

This model can be generalized to include parameters for galaxy assembly bias and orphan galaxies to gain additional flexibility in modeling the galaxy-halo connection. p. 1
Where the paper says it

Additional parameters are usually needed for more complex tracers, such as emission-line galaxies and luminous red galaxies [24-27]. Given that galaxy assembly bias (GAB)—the dependence of galaxy properties on secondary halo characteristics—has been shown to affect galaxy clustering [28-32], more recent model extensions incorporate GAB via extra parameters [20, 32-35].

Pruning redundant reasoning tokens

The paper is 2604.055613,one. p. 1

Where the paper says it

In line with the fundamental idea of HOD/CLF models, the strength of galaxy clustering is highly sensitive to the abundance of satellite galaxies. In the limiting cases, fsat = 1 leads to the strongest clustering signal, whereas fsat = 0 results in the weakest one [44].

The single most informative sentence about the paper's subject and finding is that within our CS-SHAM framework with four free parameters—regardless of whether it is implemented with an Mpeak or a Vpeak model—galaxy clustering alone can faithfully reproduce both the CLFs and CSMFs in halos more massive than log Mh ∼ 12.9.

How the training signal is built

The authors use the Sobol sequence method to draw 512 parameter combinations from a prior space specified in Table 2. These parameters are subsequently employed to populate galaxies within subhalos, following the procedure described in Section 3. p. 6

Where the paper says it

3] f2 [-24,-19] [10,13] [10,13] f3 [0. 2] The parameters drawn from the Sobol sequence are subsequently employed to populate galaxies within subhalos, following the procedure described in Section 3.

1. The Sobol-sequence parameters together with the corresponding wp are used to build Gaussian process emulators for each rp bin over all magnitude or stellar mass bins. p. 6
Where the paper says it

Using these Sobol-sequence parameters together with the corresponding wp, we build Gaussian process emulators for each rp bin over all magnitude or stellar mass bins, following [106]. Gaussian process regression is a commonly used, non-parametric machine learning method that models the output variable (e.

Where the gains come from

The primary gains of the CS-SHAM framework stem from explicitly modeling the satellite fraction fsat as a function of stellar mass or luminosity. This parameterization allows for flexibility in matching observed galaxy clustering across different luminosity and stellar mass bins. p. 1

Where the paper says it

We therefore introduce an fsat parameterization to achieve the flexibility required to match the observed galaxy clustering. Indeed, similar treatments of the satellite fraction have been adopted in several recent studies of ELG galaxy clustering [62-65], employing either a constant or halo-mass-dependent fsat.

The ability to recover the true HOD and CLF/CSMF over a broad range of galaxy luminosities and host halo masses with only four model parameters provides valuable constraints on the galaxy–halo connection. p. 0
Where the paper says it

Indeed, within the CS-SHAM framework the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) are accurately recovered. Furthermore, we demonstrate for the first time that galaxy clustering constrains the HOD and CLF/CSMF primarily for relatively massive halos.

This approach is particularly effective for constraining the satellite-galaxy HOD in massive halos. p. 0
Where the paper says it

Furthermore, we demonstrate for the first time that galaxy clustering constrains the HOD and CLF/CSMF primarily for relatively massive halos. Because the halo bias is nearly constant for low-mass halos, galaxy clustering is generally not very sensitive to the satellite population residing in these low-mass systems.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Adaptive Subhalo Mass Proxy Selection: The AI system can dynamically select between subhalo mass proxies Mpeak and Vpeak based on the specific galaxy sample being analyzed to maximize clustering reproduction accuracy, as CS-SHAM reliably reproduces galaxy clustering whether Mpeak or Vpeak is used as the subhalo mass proxy.

  2. Luminosity Dependent Satellite Fraction Modeling: The AI system can implement a free parameterization of the satellite fraction fsat as a function of stellar mass or absolute magnitude using an error function, allowing it to capture how clustering depends on stellar mass or luminosity by fitting fsat(Mz) = f1 · erf[(Mz − f2) · f3] for different galaxy samples.

  3. Parameter Degeneracy Resolution: The system can use the comparison between Mpeak and Vpeak models to infer which mass indicator yields a more accurate recovery of the true fsat curve, noting that the model that uses the same subhalo mass indicator as the one employed to construct the mock yields a more accurate recovery of the true fsat.

  4. Robust Halo Occupation Distribution and Conditional Luminosity Function Recovery: The improved AI system can accurately recover HOD and CLF/CSMF for galaxies in halos more massive than log Mh 12.9, regardless of whether Mpeak or Vpeak is used, which "demonstrate that within our CS-SHAM framework with four free parameters—regardless of whether it is implemented with an Mpeak or a Vpeak model—galaxy clustering alone can faithfully reproduce both the CLFs and CSMFs in halos more massive than log Mh 12.9."

  5. Constraint Tightening via Observational Integration: The AI system can be designed to incorporate weak lensing, X-ray, and SZ measurements alongside galaxy clustering constraints to allow for stringent tests of cosmological models when applied to observational samples like DESI data.

Abstract

Subhalo abundance matching (SHAM) is a commonly used framework for modeling the galaxy-halo connection. Yet, its standard implementation has difficulty reproducing the observed galaxy clustering with high accuracy (e.g., χ 2/dof about 1). To overcome this issue, we propose a novel CS-SHAM framework, in which central and satellite galaxies are independently matched to main and satellite subhalos in simulations. Within this scheme, we introduce three free parameters to explicitly characterize the satellite fraction, f sat, as a function of stellar mass or absolute magnitude. To evaluate the performance of CS-SHAM, we apply it to two sets of mock galaxy catalogs built with the conventional SHAM method but using different subhalo mass proxies, M peak and V peak, as well as two additional galaxy samples generated from a SAM and from TNG-300. We demonstrate that CS-SHAM reliably reproduces galaxy clustering whether M peak or V peak is used as the subhalo mass proxy. We also find that the models are unable to place robust constraints on f sat if different mass proxies are employed. Indeed, within the CS-SHAM framework the halo occupation distribution (HOD) and conditional luminosity or stellar mass function (CLF/CSMF) are accurately recovered. Furthermore, we demonstrate for the first time that galaxy clustering constrains the HOD and CLF/CSMF primarily for relatively massive halos. Because the halo bias is nearly constant for low-mass halos, galaxy clustering is generally not very sensitive to the satellite population residing in these low-mass systems.

Sources

Related papers