Cooperative Adaptive Cruise Control with Variable Time Headway for Graceful Degradation under Fluctuating Network Quality of Service
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: We're looking at the paper: "Cooperative Adaptive Cruise Control with Variable Time Headway for Graceful Degradation under Fluctuating Network Quality of Service".
Title and authors: Rosa: So we're looking at this paper, "Cooperative Adaptive Cruise Control with Variable Time Headway for Graceful Degradation under Fluctuating Network Quality of Service." We talked about how the system adapts when communication quality drops, and now let's talk about who wrote this.
Dev: The authors are Johannes Böhm, Eric Schöneberg, Kevin Schmidt, Wolfgang Fischer, and Daniel Görges. They seem to be coming from a mix of control systems and robotics research.
Rosa: I see that they focus on the core concept of graceful degradation under fluctuating network conditions. That sounds like it has some serious implications for any cooperative driving system we build.
Taro: Graceful degradation is important because it means the system doesn't just fail completely when things get bad; it manages the failure in a controlled way, which is what I care about when testing failure modes.
Dev: Exactly. They introduce a specific control design algorithm for this, and they also use this framework called Integral Quadratic Constraints to prove that the system stays stable even with these changing conditions.
Rosa: That sounds like a pretty robust approach, but I need to understand exactly what they are proposing regarding the distance control part because that seems new.
Taro: It sounds like they're not just relying on the basic predecessor control anymore; they introduce a distance control to a virtual preceding vehicle when things get tough.
Dev: That's a key technical point. They realize that when network conditions degrade and you need larger distances, you can't just stick to the original settings, so you introduce this new controller for that virtual vehicle.
Rosa: So, what does this actually mean for the driver who is just trying to drive safely in traffic? Does it make it easier or harder?
Taro: It means that when communication is bad, the system effectively tells the car to behave as if there's a bigger gap between you and the car ahead of you.
Dev: Precisely. And they show how they can do this dynamically by adapting that time headway factor based on how much the network is lagging or jittering.
Rosa: Okay, so we’ve seen the setup, and now we need to understand the actual mechanism they are proposing for this dynamic distance adjustment.
The paper's summary: Dev: Let's go over what this paper actually summarizes. They start by showing how standard ACC works with a fixed desired distance based on some reference velocity, and then they show how that breaks down when the network gets noisy or delayed.
Rosa: They outline the whole process of their proposed solution: when the quality of service drops below a certain level needed to maintain those desired inter-vehicle distances, they trigger an online adaptation of those reference distances.
Taro: So, instead of sticking to a fixed setting, the system actively adjusts its target distance based on what it senses about the network performance right then and there.
Dev: Right. The way they implement this change is by reflecting it through a modification of that time headway factor, which is basically how much space you let between your car and the one in front of you.
Rosa: And to make sure all that adaptation doesn't lead to instability, they introduce a specific distance control for a virtual preceding vehicle alongside the velocity-based control.
Taro: That distance control seems like the mechanism that lets them achieve this graceful degradation without losing control entirely when the network hiccups.
Dev: Yes, and then to prove that this whole system stays stable, they use Integral Quadratic Constraints to guarantee robust stability for the resulting linear parameter-varying system with communication delay.
Rosa: It sounds like a lot of heavy math there, but their goal is clear: maintain safe distances even when the network quality fluctuates below what's ideal for maintaining those distances.
Taro: The validation part is also important, so they test this in simulation and then on actual small-scale test vehicles to see if it holds up in a real environment.
Dev: And they found that the concept of using a distance control to a virtual predecessor can actually be applied even when there are those communication delays present.
The paper's improvements: Rosa: Now let's talk about what the authors suggest as improvements over previous methods. They seem to focus on extending existing CACC designs by making this adaptation dynamic based on network QoS rather than just static settings.
Dev: They propose replacing a fixed time headway factor with a time-varying parameter, which we call beta of t, or beta of t, when the network quality changes over time.
Taro: It's interesting that they specify that this adaptation only needs to happen for long-term changes in that delay measure tau of t and not for rapid jitter. That’s a practical constraint because you don't want the system constantly changing its fundamental spacing settings every few milliseconds.
Rosa: So, it suggests a deployment algorithm where the communication structure coefficients are recalculated whenever that overall delay measure tau of t changes to ensure that the time headway factor is set correctly.
Dev: That recalculation ensures that condition sixteen is met, which means they dynamically adjust the time headway factor until it satisfies the requirement for maintaining those distances.
Taro: So, it's a self-tuning mechanism for the spacing—the system monitors its performance against network quality and adjusts its fundamental rules accordingly to keep things stable.
Rosa: This moves beyond just having a fixed setting; it suggests a much smarter, adaptive way to manage safety margins based on real-time network status.
Dev: It’s about making sure the distance control to that virtual predecessor is always appropriate for the current communication delay, which is what they prove using those IQCs for robustness.
Conclusion: Rosa: So, wrapping up this discussion on "Cooperative Adaptive Cruise Control with Variable Time Headway for Graceful Degradation under Fluctuating Network Quality of Service." They've shown a way to dynamically adjust distances based on network quality through time headway factors and a virtual distance control.
Dev: The main takeaway is that you can maintain robust stability for the system, even when you have those time-varying communication delays, by using the Integral Quadratic Constraints framework.
Taro: I just want to emphasize that their validation in simulation and experiments with small-scale vehicles confirms that this approach actually works outside of a perfect lab setting.
Rosa: It seems like they've successfully introduced a graceful degradation strategy where the system handles network failures by adjusting its spacing rules automatically, which is something we need to consider for real deployment.
Dev: And they conclude that the distance control to the virtual predecessor can be applied reliably despite those communication delays, which is a big piece of information for us working on real-time loops.
Taro: I think it sets a clear direction for future work, like analyzing what happens when you're in the middle of a rapid time headway change—the transients.
Rosa: And that sounds like a logical next step—understanding the behavior during those transitions is where we need to focus next in our research.
RPTU University Kaiserslautern-Landau · Robert Bosch GmbH
eess.SY, cs.SY
Submitted: 2026-04-02
Updated: 2026-04-02
Comments: 8 pages, 24th European Control Conference (ECC26)
Journal ref: 2026 European Control Conference (ECC)
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 83/100
The gist: Cooperative Adaptive Cruise Control with Variable Time Headway for Graceful Degradation under Fluctuating Network Quality of Service proposes a dynamic distance adaptation for Cooperative Adaptive…
Key concepts
- Graceful Degradation
- This refers to how the CACC system handles reduced communication quality. Instead of failing completely, it adapts its behavior—specifically by changing the time headway factor—to maintain safe vehicle distances even when network conditions are poor.
- Virtual Preceding Vehicle Distance Control
- When communication limits prevent tracking a real car ahead, the system introduces a control mechanism that manages the distance to an imaginary 'virtual' vehicle. This allows the platoon to maintain safe spacing based on adapted reference distances.
- Integral Quadratic Constraints (IQC)
- IQC is a mathematical framework used to rigorously prove that the CACC system remains stable even when dealing with time-varying parameters and communication delays. It ensures robust performance against uncertainties in network quality.
Terminology
Summary
Cooperative Adaptive Cruise Control with Variable Time Headway for Graceful Degradation under Fluctuating Network Quality of Service proposes a dynamic distance adaptation for Cooperative Adaptive Cruise Control (CACC) under timevarying network conditions When the Quality of Service (QoS) drops below a level required to maintain desired inter-vehicle distances, an online adaptation of the reference distances, reflected by a change of the time headway factor, becomes necessary The paper presents a control design algorithm realizing a graceful degradation, for which a distance control to a virtual preceding vehicle is introduced Furthermore, the Integral Quadratic Constraints (IQC) framework is applied to guarantee robust stability of the time-varying system The concept is validated in simulation and experimentally using small-scale test vehicles. p. 0 Cooperative Adaptive Cruise Control with Variable Time Headway for
Graceful Degradation under Fluctuating Network Quality of Service
Johannes Böhm¹, Eric Schöneberg¹, Kevin Schmidt², Wolfgang Fischer² and Daniel Görges¹
Abstract—This paper proposes a dynamic distance adaptation
for Cooperative Adaptive Cruise Control (CACC) under timevarying network conditions. When the Quality of Service (QoS)
drops below a level required to maintain desired inter-vehicle distances, an online adaptation of the reference distances, reflected
by a change of the time headway factor, becomes necessary.Where the paper says it
System Modeling and Control Design
The vehicle platoon consists of a leading vehicle followed by N vehicles, where the goal of ACC is the design of a local controller for each vehicle which tracks the velocity of its predecessor while keeping a distance which guarantees collision avoidance. The dynamics for the distance to the predecessor are defined as d i(t) = s i-1(t) - s i(t) - lV i-1(1). p. 4 It must be shown that the overall
delay (12) is still defined by this factor in steady state for a
constant 𝜏𝑖
. For this case, the transfer functions 𝐺̅
𝑖
(𝑠) and
𝐹̅
𝑖
(𝑠) from (10) and (11) for model (23) can be derived as
𝐺̅
𝑖
(𝑠) =
𝑘𝑣
(𝑠 − 𝑘𝑑
)𝑒
−𝜏𝑖𝑠
𝑇 𝑠
3 + 𝑠
2 + 𝑘𝑣
𝑠 − 𝑘𝑣𝑘𝑑
𝑒
−𝜏𝑖𝑠(Δ̂
𝑖
𝑠 + 1)
(27)
𝐹̅
𝑖
(𝑠) =
𝑇 𝑠
2 + 𝑠 − 𝑘𝑣𝑘𝑑Δ̂
𝑖
𝑒
−𝜏𝑖𝑠
𝑇 𝑠
3 + 𝑠
2 + 𝑘𝑣
𝑠 − 𝑘𝑣𝑘𝑑
𝑒
−𝜏𝑖𝑠(Δ̂
𝑖
𝑠 + 1)
, (28)
and using definition (12), the overall vehicle delay is defined
by the feedback term of the distance control loop
𝐹̅
𝑖
(0) = Δ̂
𝑖 = Δ𝑖 + 𝜏𝑖
(29)
which proves that the distance control to the virtual predecessor can be applied despite the communication delays. (2)
The desired reference distance
𝑑𝑖,ref(𝑡) = 𝛼𝑖 + 𝛽𝑖
𝑣𝑖
(𝑡), (3)
is the sum of a constant offset 𝛼𝑖
and a term proportional to the
velocity with the time headway 𝛽𝑖
as proportionality factor. As
the distance should never fall below the offset 𝛼𝑖
, all following
investigations are done using the reduced distances
𝑑̃
𝑖
(𝑡) = 𝑑𝑖
(𝑡) − 𝛼𝑖
(4)
𝑑̃
𝑖,ref(𝑡) = 𝑑𝑖,ref(𝑡) − 𝛼𝑖 = 𝛽𝑖
𝑣𝑖
(𝑡) (5)
which also establishes a linear relation suitable for analysis in
frequency domain and leads to the condition
𝑑̃
𝑖
(𝑡) ≥ 0 ∀ 𝑡 > 0. Based on this,
three different local linear ACC controllers are proposed: A
purely velocity-based controller which follows the velocity of
the preceding vehicle, a distance-based controller which controls the distance to the preceding vehicle, and a velocity- and
distance-based controller
𝑈𝑖
(𝑠) = 𝐾𝑑
(𝑠)(𝛽𝑖𝑉𝑖
(𝑠) − 𝐷̃
𝑖
(𝑠)) +
𝐾𝑣
(𝑠)(𝑉𝑖−1
(𝑠) − 𝑉𝑖
(𝑠))
(9)
which combines the two aforementioned ones. Figure 2 exemplary shows the control structure of the
combined distance- and velocity-based controller with pure Pcontrollers 𝐾𝑣
(𝑠) = 𝑘𝑣
and 𝐾𝑑
(𝑠) = 𝑘𝑝
.Where the paper says it
Where the paper says it
Where the paper says it
Extension to Cooperative Control
To realize smaller time headway factors β i < Δ i than the vehicle delay allows, information of vehicles further in front is required. The solution proposes replacing the velocity of the preceding vehicle as reference velocity by a weighted sum of vehicle velocities further in front of the ego-vehicle v s i(t) = ∑ j=0 a i,j v j(t) with ∑ i j=0 a i,j = 1. p. 2 Control to virtual predecessor in CACC. presented in [3] proposes to replace the velocity of the preceding vehicle as reference velocity by a weighted sum of vehicle
velocities further in front of the ego-vehicle
𝑣s𝑖
(𝑡) = ∑
𝑖
𝑗=0
𝑎̂𝑖,𝑗
𝑣𝑗
(𝑡) with ∑
𝑖
𝑗=0
𝑎̂𝑖,𝑗 = 1 (15)
where the velocities 𝑣𝑗
(𝑡) for 𝑗 < 𝑖 − 1 are not locally measurable and must be sent via V2V communication. presented in [3] proposes to replace the velocity of the preceding vehicle as reference velocity by a weighted sum of vehicle
velocities further in front of the ego-vehicle
𝑣s𝑖
(𝑡) = ∑
𝑖
𝑗=0
𝑎̂𝑖,𝑗
𝑣𝑗
(𝑡) with ∑
𝑖
𝑗=0
𝑎̂𝑖,𝑗 = 1 (15)
where the velocities 𝑣𝑗
(𝑡) for 𝑗 < 𝑖 − 1 are not locally measurable and must be sent via V2V communication. A systematic
approach to determine the weighting factors 𝑎̂𝑖,𝑗
is presented
and it is shown to be sufficient to establish communication
links to at most two vehicles in front, whose indices are
referred to as 𝑙
𝑖
and its predecessor 𝑙
𝑖 − 1.Where the paper says it
Where the paper says it
Handling Time-Varying Network Conditions
All results from the previous section apply to linear timeinvariant (LTI) systems, but the paper proposes that the overall delay Δ̂ i(t) = Δ i + τ i(t) be dynamically adapted online when the QoS of the communication network changes. The time headway factor is then replaced by a time-varying parameter β i(t) and highlighted the necessary changes in the deployment algorithm. p. 3 Hence,
we replace the constant factor 𝛽𝑖
by a time-varying parameter
𝛽𝑖
(𝑡) and highlight the necessary changes in the deployment
algorithm. While the remaining analysis will be valid for arbitrarily
fast variations of Δ̂
𝑖
(𝑡) and 𝜏𝑖
(𝑡), a practical implementation
requires an advanced network monitoring system that adapts
the time headway factor in (22) only for long-term changes
of 𝜏𝑖
(𝑡), not for rapid jitter. While the remaining analysis will be valid for arbitrarily
fast variations of Δ̂
𝑖
(𝑡) and 𝜏𝑖
(𝑡), a practical implementation
requires an advanced network monitoring system that adapts
the time headway factor in (22) only for long-term changes
of 𝜏𝑖
(𝑡), not for rapid jitter. First investigations on a similar
use case with another controller are done in [10], but such a
policy depends on the controller and further assumptions on
the network.Where the paper says it
Where the paper says it
Robust Stability Proof
The system is analyzed using the Integral Quadratic Constraints (IQC) framework to guarantee robust stability of the resulting linear parameter-varying (LPV) system with communication delay. The uncertainty in the time-varying parameter Δ̂ i(t) is modeled as bounded uncertainty of the form Δ̂ i(t) = Δ̅ i(1 + rΔ i δΔ i(t)). p. 5 The remainder of this section
explains the uncertainty descriptions for the IQC analysis. UncertaintyDescriptions of the Virtual Time Headway
and Communication Delays
As usual in robust control theory, the time-varying parameter
Δ̂
𝑖
(𝑡) in (21) is modeled as bounded uncertainty of the form
Δ̂
𝑖
(𝑡) = Δ̅
𝑖(1 + 𝑟Δ𝑖
𝛿Δ𝑖
(𝑡)) (32)
with the nominal value Δ̅
𝑖
, the norm-bounded time-varying
uncertainty 𝛿Δ𝑖
(𝑡) ∈ [−1, 1] and the scaling factor
𝑟Δ𝑖
=
Δ̂
𝑖max
− Δ̂
𝑖min
Δ̂
𝑖max
+ Δ̂
𝑖min
(33)
depending on the minimum and maximum bounds on Δ̂
𝑖
(𝑡). Executing the IQC analysis
solves a linear matrix inequality (LMI) optimization problem. Feasibility of the LMI problem establishes robust stability.Where the paper says it
Where the paper says it
Simulation and Experimental Validation
The simulations are executed using MATLAB/Simulink with a platoon of four vehicles with the same parameters as the test vehicles. The experimental setup consists of four test vehicles in a scale of 1:10 as shown in Figure 10. p. 7 After 𝑡 = 40 s, the desired time headway can
be established again and the distance decreases. Experimental Setup and Results
The experimental setup consists of four test vehicles in a scale
of 1:10 as shown in Figure 10. The time-varying communication delays for these vehicles in CACC mode are shown in Figure 9,
together with the simulation results of the velocities, reduced
distances and adaptive time headways. Notably, the first increase of the communication delays 𝜏2
(𝑡)
and 𝜏3
(𝑡) at 𝑡 = 10 s does not have any qualitative effect on
the platoon behavior because this change can be caught by a
recalculation of the communication parameters 𝑎̂𝑖,𝑗
(𝑡). While the small-scaled testbed omits effects
of real vehicles (e. , missing air- and rolling resistances or
different powertrain dynamics), the similarity to the simulation
confirms the qualitative feasibility of the distance control to
the virtual predecessor and the adaptive time headway.Where the paper says it
Where the paper says it
Where the paper says it
Conclusion and Future Work
Extending an existing CACC design, we presented a graceful degradation strategy by dynamically adjusting the inter-vehicle distances based on the current network QoS. The paper highlights the necessary steps for this adjustment in the controller design, introduces a distance control to a virtual predecessor, and proves IQC-based stability of the resulting LPV system with variable communication delays. p. 7 Conclusion
Extending an existing CACC design, we presented a graceful
degradation strategy by dynamically adjusting the inter-vehicle distances based on the current network QoS. We highlighted the necessary steps for this adjustment in the controller
design, introduced a distance control to a virtual predecessor,
and proved IQC-based stability of the resulting LPV system
with variable communication delays. , when the distances
errors are regulated to zero for a constant communication
delay). Future work may address collision avoidance analysis
during time headway transients, an extension to time-varying
communication structures and network monitoring policies
that distinguish short- and long-term QoS changes. It must be shown that the overall
delay (12) is still defined by this factor in steady state for a
constant 𝜏𝑖
. For this case, the transfer functions 𝐺̅
𝑖
(𝑠) and
𝐹̅
𝑖
(𝑠) from (10) and (11) for model (23) can be derived as
𝐺̅
𝑖
(𝑠) =
𝑘𝑣
(𝑠 − 𝑘𝑑
)𝑒
−𝜏𝑖𝑠
𝑇 𝑠
3 + 𝑠
2 + 𝑘𝑣
𝑠 − 𝑘𝑣𝑘𝑑
𝑒
−𝜏𝑖𝑠(Δ̂
𝑖
𝑠 + 1)
(27)
𝐹̅
𝑖
(𝑠) =
𝑇 𝑠
2 + 𝑠 − 𝑘𝑣𝑘𝑑Δ̂
𝑖
𝑒
−𝜏𝑖𝑠
𝑇 𝑠
3 + 𝑠
2 + 𝑘𝑣
𝑠 − 𝑘𝑣𝑘𝑑
𝑒
−𝜏𝑖𝑠(Δ̂
𝑖
𝑠 + 1)
, (28)
and using definition (12), the overall vehicle delay is defined
by the feedback term of the distance control loop
𝐹̅
𝑖
(0) = Δ̂
𝑖 = Δ𝑖 + 𝜏𝑖
(29)
which proves that the distance control to the virtual predecessor can be applied despite the communication delays.Where the paper says it
Where the paper says it
Where the paper says it
References
[1] J. Lunze, “Adaptive cruise control with guaranteed collision avoidance,” IEEE Transactions on Intelligent Transportation Systems, vol. p. 7 References
[1] J. Lunze, “Adaptive cruise control with guaranteed collision avoidance,”
IEEE Transactions on Intelligent Transportation Systems, vol.Where the paper says it
[2] J. Lunze, “Vernetzte Abstandsregelung von Fahrzeugkolonnen,” at Automatisierungstechnik, vol. p. 7 1897–1907, 2019. Lunze, “Vernetzte Abstandsregelung von Fahrzeugkolonnen,” at
Automatisierungstechnik, vol.Where the paper says it
[3] J. Lunze, “Design of the communication structure of cooperative adaptive cruise controllers,” IEEE Transactions on Intelligent Transportation Systems, vol. p. 7 990–1006, 2019. Lunze, “Design of the communication structure of cooperative adaptive cruise controllers,” IEEE Transactions on Intelligent Transportation
Systems, vol.Where the paper says it
[4] J. Lunze, Networked Control of MultiAgent Systems, Second edition
[5] H. Xing, J. Ploeg, and H. p. 7 Münster: Edition MoRa, 2022. Ploeg, and H. Ploeg, and H. Nijmeijer, “Robust CACC in the presence of
uncertain delays,” IEEE Transactions on Vehicular Technology, vol.Where the paper says it
Where the paper says it
[6] F. Navas, V. Milanés, and F. p. 7 3507–3518, 2022. Milanés, and F. Milanés, and F. Nashashibi, “Using Plug&Play control for
stable ACC-CACC system transitions,” in Proceedings of the 2016 IEEE
Intelligent Vehicles Symposium (IV), 2016, pp.Where the paper says it
Where the paper says it
[7] J. Ploeg, E. Semsar-Kazerooni, G. p. 7 Nashashibi, “Using Plug&Play control for
stable ACC-CACC system transitions,” in Proceedings of the 2016 IEEE
Intelligent Vehicles Symposium (IV), 2016, pp. Semsar-Kazerooni, G. Semsar-Kazerooni, G. Lijster, N. Lijster, N. van de Wouw, and H. van de Wouw, and H. Nijmeijer, “Graceful degradation of cooperative adaptive cruise control,”
IEEE Transactions on Intelligent Transportation Systems, vol.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
[8] E. Abolfazli, B. p. 7 488–497, 2015. Abolfazli, B. Abolfazli, B. Besselink, and T. Besselink, and T. Charalambous, “On time headway
selection in platoons under the MPF topology in the presence of communication delays,” IEEE Transactions on Intelligent Transportation
Systems, vol.Where the paper says it
Where the paper says it
Where the paper says it
[9] D. Liu, S. Baldi, and S. p. 7 8881–8894, 2022. Baldi, and S. Baldi, and S. Hirche, “Collision avoidance in longitudinal
platooning: graceful degradation and adaptive designs,” IEEE Control
Systems Letters, vol.Where the paper says it
Where the paper says it
[10] A. Alsuhaim, A. p. 7 1694–1699, 2023. Alsuhaim, A. Alsuhaim, A. Rayamajhi, J. Rayamajhi, J. Westall, and J. Westall, and J. Martin, “Adapting time
headway in cooperative adaptive cruise control to network reliability,”
IEEE Transactions on Vehicular Technology, vol.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
[11] J. Veenman et al. p. 5 In the following, we use
the IQC framework. Veenman et al. In the following, we use
the IQC framework. Veenman et al. Preda, and B. Girouart, “IQClab: A new IQC based toolbox for robustness analysis and
control design,” IFACPapersOnLine, vol.Where the paper says it
Where the paper says it
Where the paper says it
[12] J. Veenman et al., “Robust stability and performance analysis based on integral quadratic constraints,” European Journal of Control, vol. p. 7 Scherer, and H. Körŏglu, “Robust stability and
performance analysis based on integral quadratic constraints,” European
Journal of Control, vol.Where the paper says it
[13] A. Megretski and A. p. 7 1–32, 2016. Megretski and A. Megretski and A. Rantzer, “System analysis via integral quadratic
constraints,” IEEE Transactions on Automatic Control, vol.Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Dynamic distance adaptation for Cooperative Adaptive Cruise Control (CACC) under timevarying network conditions allows CACC systems to maintain stability and collision avoidance even when communication quality drops below required levels, by online adapting reference distances through a change of the time headway factor.
-
The system can implement graceful degradation by introducing a distance control to a virtual preceding vehicle, which becomes necessary when network conditions degrade below the level requiring enlarged inter-vehicle distances, reflecting this change via the time headway factor.
-
Robust stability is guaranteed for the resulting linear parameter-varying (LPV) system with communication delay using the framework of Integral Quadratic Constraints (IQCs), ensuring reliable operation despite time-varying network uncertainties and delays.
-
The AI system can dynamically adapt the overall delay Delta hat i equals Delta i plus tau i, which appears in the design procedure of Theorem 2.2 and controls the virtual distance to be dtilde si,ref(t) equals Delta hat i v i(t).
-
Communication structure coefficients are recalculated whenever Delta hat i changes, ensuring that condition 16 is fulfilled by dynamically increasing or decreasing the time headway factor bi until it is satisfied.
Abstract
This paper proposes a dynamic distance adaptation for Cooperative Adaptive Cruise Control (CACC) under time-varying network conditions. When the Quality of Service (QoS) drops below a level required to maintain desired inter-vehicle distances, an online adaptation of the reference distances, reflected by a change of the time headway factor, becomes necessary. We present a control design algorithm realizing a graceful degradation, for which a distance control to a virtual preceding vehicle is introduced. Furthermore, the Integral Quadratic Constraints (IQC) framework is applied to guarantee robust stability of the time-varying system. The concept is validated in simulation and experimentally using small-scale test vehicles.
Related papers
- Industrial Load Modeling and Optimization for Market-Based Interaction with Power Systems
- Exact and Approximate Convex Reformulation of Linear Stochastic Optimal Control with Chance Constraints
- Certified Set Convergence for Piecewise Affine Systems
- Symbolic Control for Stochastic Systems via Finite Parity Games
- Multiobjective optimization-based design and dispatch of islanded, hybrid microgrids for remote, off-grid communities in sub-Saharan Africa
- Physiology-informed layered sensing for intelligent human-exoskeleton interaction