Energy-Efficient Velocity Profile Optimization for Movable Antenna-Enabled Sensing Systems

arXiv:2603.27540 · eess.SP · Submitted 2026-03-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: We're looking at the paper: "Energy-Efficient Velocity Profile Optimization for Movable Antenna-Enabled Sensing Systems".

Dev: Here's the gist of the paper. Movable antennas (MAs) enable the reconfiguration of array geometry within a bounded region to exploit subwavelength spatial degrees of freedom in wireless communication and sensing systems This paper investigates a velocity profile optimization framework for MA-assisted directionofarrival (DoA) estimation, explicitly balancing sensing accuracy with mechanical energy consumption of MAs.

Rosa: Problem Motivation The research addresses the critical gap in prior work by investigating a velocity profile optimization framework for MA-assisted directionofarrival (DoA) estimation, explicitly balancing sensing accuracy with mechanical energy consumption of MAs.

Dev: Existing research often neglects or oversimplifies the mechanical power modeling and lacks velocity profile optimization in existing studies.

Rosa: Specifically, most existing works rely on static or simplified movement-based approximations that fail to capture the kinetics of antenna movement.

Paper summary: Rosa: So we’re looking at this paper, "Energy-Efficient Velocity Profile Optimization for Movable Antenna-Enabled Sensing Systems." Basically, they're tackling a big problem in antenna arrays where you can move the antennas to get better sensing. The core idea is that most previous research focused only on how good the sensing accuracy was, but they ignored the actual mechanical energy cost of moving those antennas.

Dev: Exactly. They argue that we need to balance sensing accuracy with the mechanical energy consumption of these movable antennas. The authors are proposing a framework for optimizing the velocity profile—how fast and in what pattern you move—to get the best efficiency ratio between what you sense and how much power you use, which they call sensing energy efficiency or EE.

Rosa: It sounds like they're trying to fix a gap where prior work often uses simple models of antenna movement instead of the actual physics involved. They establish a Newtonian-based mechanical energy model for this movement, including things like inertia and drag from the air.

Dev: And then they formulate this as an optimization problem, aiming to maximize that EE metric by finding the best velocity profile. They use some calculus of variations to turn it into an infinite-dimensional problem, which they solve using a spectral discretization method based on the Galerkin method.

Rosa: What really matters is how they handle those complex movement costs. The paper suggests that this approach allows them to explicitly balance the track length and the sensing interval, which is a trade-off that needs careful design in practice.

Dev: That balancing act leads to some interesting findings about the nature of the optimal solution, specifically regarding how smooth or non-smooth that velocity profile ends up being. The paper claims their optimized velocity profile is inherently smooth and dominated by lowfrequency spectral modes.

Conclusion: Rosa: So, looking at the whole thing, this paper by Wang, Mao, Yu, and Zhang is about taking MA design beyond just maximizing sensing performance to actually optimizing the movement itself. They show how to use velocity profile optimization to achieve a better trade-off between what you measure and the energy you spend moving those antennas.

Dev: The authors highlight that this new approach moves away from just using static or simplified movement approximations that don't capture the real kinetics of antenna motion. Instead, they found that by optimizing the velocity profile, they can get a better sensing energy efficiency metric.

Rosa: What this means for us is that if you’re designing a system with movable antennas, you can stop just picking a fast or slow speed and start designing the actual movement pattern to be as smooth as possible. They found that the optimal profile naturally avoids those jerky, high-frequency movements caused by strong nonlinear drag.

Dev: That smoothness is key because it means you get a good balance between sensing performance and mechanical energy consumption without needing overly complicated iterative computations for every single scenario. It seems they’ve found a way to handle the complexity of real-world movement in a more tractable way than before.

Jiannan Wang, Yuyi Mao, Xianghao Yu, Ying-Jun Angela Zhang

City University of Hong Kong · Macau University of Science and Technology · The Chinese University of Hong Kong

eess.SP

Submitted: 2026-03-29

Updated: 2026-11-02

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 84/100

The gist: Movable antennas (MAs) enable the reconfiguration of array geometry within a bounded region to exploit subwavelength spatial degrees of freedom in wireless communication and sensing systems This…

Key concepts

Movable Antennas (MAs)
These are antennas that can change their position within a limited area. They are used in sensing systems to explore different spatial degrees of freedom to improve signal reception and direction estimation.
Sensing EE
This metric measures the efficiency of the sensing system by calculating how much spatial information is acquired per unit of mechanical energy consumed. Maximizing this value is the primary goal of the optimization.
Velocity Profile Optimization
Instead of using simple, fixed movement models, this framework optimizes how fast and where an antenna moves over time. The goal is to find a specific motion pattern that best achieves the desired sensing performance while minimizing energy expenditure.
Spectral Discretization (Galerkin Method)
Since the optimization problem involves a continuous function (velocity profile), this method approximates it by representing the velocity as a sum of sinusoidal waves. This allows complex, infinite-dimensional problems to be solved numerically.

Terminology

Summary

Movable antennas (MAs) enable the reconfiguration of array geometry within a bounded region to exploit subwavelength spatial degrees of freedom in wireless communication and sensing systems This paper investigates a velocity profile optimization framework for MA-assisted directionofarrival (DoA) estimation, explicitly balancing sensing accuracy with mechanical energy consumption of MAs. p. 0

Problem Motivation

The research addresses the critical gap in prior work by investigating a velocity profile optimization framework for MA-assisted directionofarrival (DoA) estimation, explicitly balancing sensing accuracy with mechanical energy consumption of MAs. Existing research often neglects or oversimplifies the mechanical power modeling and lacks velocity profile optimization in existing studies. p. 1 Specifically, most existing works rely on static or simplified movement-based approximations that fail to capture the kinetics of antenna movement. p. 1

System Modeling

The paper establishes a signal model for MA-based one-dimensional (1-D) directionofarrival (DoA) estimation that explicitly accounts for the antenna’s time-varying velocity. The mechanical energy consumption model is derived from Newtonian mechanics, incorporating inertial forces, linear damping, and quadratic aerodynamic drag induced by antenna movement. p. 1 The total energy consumption functional E(v) over the observation interval [0, T] is derived as E(v) = Z T 0 mav˙(t) + α1v 2(t) + α2v 3(t) dt. p. 3

Optimization Framework

The core optimization problem formulated is to maximize sensing EE defined as the ratio of the Fisher information to the mechanical energy cost, sensing EE characterizes the amount of spatial information acquired per unit of energy expenditure. The problem is formulated as max v(t) J˜(v) = V(v) E(v) s. p. 3t. v T 0 = 0, 0 ≤ v(t) ≤ Vmax, ∀t ∈ [0, T], Z T 0 v(τ) dτ ≤ L. p. 3 To handle the infinite-dimensional nature of the problem, a spectral discretization framework based on the Galerkin method is proposed to expand the velocity profile over a sinusoidal basis. p. 1

Numerical Solution and Results

For scenarios involving strong nonlinear aerodynamic drag, a two-layer algorithm combining Dinkelbach’s method and successive convex approximation (SCA) is developed to solve the problem. Numerical results demonstrate that the optimized velocity profile significantly outperforms baselines in terms of EE across various system configurations. p. 0 Specifically, in the linear damping-dominated regime, the numerical solution converges to the derived analytical solution, eliminating the need for iterative computation. p. 1 The analysis shows that low-frequency components completely dominate, allowing the optimal profile to naturally avoid non-smooth high-frequency oscillations. p. 9

Conclusion

The paper shifted the MA design paradigm for 1-D DoA estimation from conventional motion models to time-varying velocity profile optimization to maximize the sensing EE. The analysis revealed that the optimal velocity profile is inherently smooth and dominated by lowfrequency spectral modes, achieving a good trade-off between the sensing performance and mechanical energy consumption. p. 0 Future work may investigate the extension of this velocity profile optimization framework to multi-MA cooperative systems or ISAC scenarios. p. 0

Pruning redundant reasoning tokens

The paper investigates a velocity profile optimization framework for MA-assisted directionofarrival (DoA) estimation, explicitly balancing sensing accuracy with mechanical energy consumption of MAs.

How the training signal is built

The variance functional V(v) can be reformulated as an explicit kernel representation in terms of v(t), which is given by V(v) = Z Z [0,T] 2 v(u)K(u, s)v(s) du ds. The kernel function K(u, s) is defined as K(u, s) = T min(u, s) − us / T squared. p. 4 p. 4 This structure is pivotal for the spectral analysis in the next subsection. p. 4

Where the gains come from

The optimized velocity profile is inherently smooth and dominated by lowfrequency spectral modes, achieving a good trade-off between the sensing performance and mechanical energy consumption. This is demonstrated by Fig. p. 2 6, which compares the sensing EE versus the nonlinear drag coefficient α2 across different schemes. p. 9 The proposed method achieves the highest sensing EE of 0. p. 124 1/rad 2/Joule with a smooth profile. p. 3 This widening performance gap highlights the inherent flexibility of the spectral representation, which leverages multi-mode DoFs to dynamically sculpt the velocity profile against strong nonlinear drag. p. 9

Impact of System Configurations

The sensing EE of all schemes monotonically increases with T except for the ‘[Perf] Binary’ method. Covering a longer distance within a fixed sensing interval T inevitably demands higher average velocities. With the exception of the ‘[Perf] Binary’ benchmark, the sensing EE of all evaluated schemes decreases monotonically as L extends. p. 9 This behavior is intuitive: for a fixed track length L, extending the sensing interval T allows the MA to travel at a lower average velocity. p. 2

The variance functional V(v) can be reformulated as an explicit kernel representation in terms of v(t), which is given by V(v) = Z Z [0,T] 2 v(u)K(u, s)v(s) du ds. The kernel function K(u, s) is defined as K(u, s) = T min(u, s) − us / T squared.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Mechanical energy-efficient velocity profile optimization for movable antenna-enabled sensing systems allows AI systems to dynamically adjust antenna movement to maximize sensing accuracy while minimizing mechanical power consumption, explicitly balancing sensing accuracy with mechanical energy consumption of MAs.

  2. AI systems can be designed to adapt their physical motion in real-time based on the required trade-off between estimation accuracy and energy cost, specifically by utilizing the derived optimal velocity profile which is inherently smooth and dominated by lowfrequency spectral modes.

  3. The system can achieve superior sensing performance compared to conventional benchmarks, as demonstrated by simulations where the proposed method yields a superior sensing-energy tradeoff and achieves a higher sensing EE of 0.24 1/rad2/Joule across different drag conditions.

  4. AI systems can be configured to maintain high sensing accuracy even in the presence of strong nonlinear aerodynamic drag, as the framework uses SOS decomposition to transform the timedomain constraints into a tractable algebraic formulation.

  5. The system can dynamically sculpt its velocity profile against strong nonlinear drag by incorporating higher-frequency components when drag is non-negligible, which allows it to adaptively shape the velocity profile and preserve sensing EE.

Sources

Related papers