Cross-Environment Diagnostics for New Physics in Proton-Proton and Heavy-Ion Collisions

arXiv:2603.11097 · hep-ph, hep-ex, nucl-ex, nucl-th · Submitted 2026-03-11 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Cross-Environment Diagnostics for New Physics in Proton-Proton and Heavy-Ion Collisions".

Mira: Here's the gist of the paper. Proton-proton and heavy-ion measurements are usually interpreted within separate theoretical and experimental frameworks, even when the same reconstructed final state is measured and the pp result provides or constrains the elementary reference for nuclear observables The separation creates a potential blind spot: an omitted contribution can be absorbed into production or signal-model parameters in pp collisions and then be reinterpreted through independent nuclear-medium parameters in heavy-ion collisions We propose cross-environment closure as a complementary search principle Cross-Environment Closure Principle The central proposal is to fit conventional pp and heavy-ion sectors with their own parameters, but require any candidate new-physics contribution to obey one common physical hypothesis across them Let Dpp and DAA denote two sets of observables measured for the same reconstructed final state The diagnostic has power only when the candidate produces at least one correlated change that cannot be reproduced by independent retuning of the conventional descriptions Illustrative Examples with Quarkonium Quarkonium is used as a controlled illustration because it is measured through the same narrow dilepton structures in pp, pA, and AA collisions, while its production and medium response are described by distinct sets of models The central proposal is simple: fit the conventional pp and heavy-ion sectors with their own parameters, but require any candidate new-physics contribution to obey one common physical hypothesis across them The relevant evidence is not a single value of RAA or v2, both of which are themselves major heavy-ion observables Propagation of Consistency Observables The same pp production ratio therefore propagates into both systems The final equation for the AA sample is vfit2 = vQ2 + ϵAArpp(RXAA/RQAA)vX2 / (1 + ϵAArpp(RXAA/RQAA)) The resulting shifts are pT dependent because the same component that was hidden by retuning the pp spectrum is harder than the conventional contribution Practical Implementation and Limitations A practical implementation would proceed as follows: 1.

Kai: define a common candidate contribution in all relevant collision systems, including its mass, decay structure, and production dependence 2.

Mira: retain the conventional sector-specific parameters in the pp and nuclear descriptions rather than forcing the two models to be identical 3.

Kai: fit mass shape, production spectrum, and angular information jointly enough to constrain the candidate in pp The method does not replace a full experimental likelihood We have proposed cross-environment closure as a diagnostic for new physics in proton-proton and heavy-ion collisions The central observation is that a missing contribution can be hidden more than once: first through production or signal-model freedom in pp collisions, and again through independent nuclear-medium parameters in AA collisions A definitive search would require real detector responses, covariances, external channels, and a concrete model High-energy and heavy-ion analyses can provide more information when they test the same missing contribution together than when each sector is allowed to absorb it separately The broader message is nevertheless independent of those details Acknowledgments This work was supported by Academia Sinica, National Cheng Kung University, and the National Science and Technology Council (NSTC) of Taiwan The numerical examples are generated from the toy response models described in the text and are intended as methodological demonstrations No experimental data are analyzed in this work The figure-generation code is provided with the journal submission as ancillary material and is available from the author upon reasonable request A Toy-model details and signed mass scan uses SQ(pT) = A (1 + pT/p0 - n).

Title and authors: Kai: So we're looking at this paper, "Cross-Environment Diagnostics for New Physics in Proton-Proton and Heavy-Ion Collisions." The title itself suggests they are looking at how to find new physics using both proton-proton and heavy-ion collisions together.

Mira: That’s right, Kai. It’s about a problem where the way we look for new physics in proton-proton collisions and heavy-ion collisions is usually done separately, even when they measure the same final state.

Lev: So what they're pointing out is that this separation creates a kind of blind spot. If you miss something in one system, say proton-proton, you might just absorb that missing piece into the parameters describing production or signal models for those proton collisions.

Kai: And then later, when we look at heavy-ion collisions, we might reinterpret that same missing piece through different nuclear medium parameters.

Mira: Exactly. The paper proposes a way around this by suggesting a cross-environment closure principle where any candidate new-physics contribution has to obey one common physical hypothesis across both collision systems and observables.

Lev: It’s like saying, "if there's something new there, it has to look the same in both places," which is different from just fitting them separately and hoping for the best.

The paper's summary: Kai: In this paper, they use quarkonium as a controlled example. Quarkonium is measured through the same narrow dilepton structures in proton-proton, proton-nucleus, and heavy-ion collisions.

Mira: That’s a good point because the production models and how it responds to the medium are described by completely different sets of models for each collision type.

Kai: The central proposal is that they fit the conventional parameters for both systems separately, but any candidate new-physics contribution must obey one common physical hypothesis across them.

Lev: They show that just having a single value like the nuclear modification factor or the v two isn't enough to find anything interesting on its own <ref:2603.11097#pg1>.

Mira: The real diagnostic power comes when you look for at least one correlated change that can't be explained by independently retuning the conventional descriptions.

Kai: They illustrate this with a specific equation for the heavy-ion sample, where v two depends on a term that is proportional to the ratio of yields between proton-proton and heavy-ion collisions multiplied by some correction factor <ref:2603.11097#pg1,proton-proton and heavy-ion collisions>.

Lev: That correction factor is dependent on how you tune the proton-proton spectrum; it gets harder at higher transverse momentum because that same component was hidden when you adjusted the pp spectrum.

The paper's improvements: Kai: One of the main ideas they push is that a shared production ratio propagates into both systems. That means if you have a missing component in proton-proton, it automatically shows up in heavy-ion data too.

Mira: They show how this translates into an equation for v two where the shift depends on the transverse momentum, p T, because the component that was hidden by retuning the pp spectrum is harder than what we normally expect <ref:2603.11097#pg1>.

Lev: From an engineering standpoint, they suggest that you can define a common candidate contribution first—its mass, its decay structure, and how it's produced—and then fit conventional parameters in both environments around that shared hypothesis.

Kai: The practical implementation involves fitting the mass shape, the production spectrum, and angular information jointly enough to constrain this candidate in proton-proton collisions.

Mira: It’s important to stress that this method doesn't replace a full likelihood fit for the experiment; it addresses the physical closure logic before you actually build a detector or run an analysis.

Lev: They mention something called the effective projection coefficient, epsilon be, which quantifies how much of an injected yield in a specific bin b is absorbed into the fitted conventional quarkonium yield in environment e. That gives us a way to quantify that interdependence you mentioned earlier.

Conclusion: Kai: So, to wrap up this paper, the main thing they argue is that a missing contribution can be hidden twice: first through production and signal model freedom in proton-proton collisions, and then again through independent nuclear medium parameters in heavy-ion collisions.

Mira: They are proposing cross-environment closure as a way to search for this by requiring the candidate new-physics contribution to obey one common physical hypothesis across both systems.

Lev: It’s about testing if that shared component is truly unmodeled or just being absorbed separately into the conventional descriptions of each environment.

Kai: They show that evidence isn't just a single value like R AA or v two; it’s about looking for a common mass offset, a decay-angular pattern, or a linked dependence across the proton-proton spectrum and nuclear observables <ref:2603.11097#pg1>.

Mira: The paper concludes that while they can address the physical closure logic, quantifying the final sensitivity still requires experimental covariance and a collaboration specific likelihood.

Lev: For me, what this means is that if we can test these shared hypotheses together in both collision systems, we might get more information than if each sector was allowed to absorb the contribution independently.

Kai: So the paper "Cross-Environment Diagnostics for New Physics in Proton-Proton and Heavy-Ion Collisions" suggests a way to search for physics by demanding consistency across different experimental environments.

Institute of Physics, Academia Sinica · Department of Physics, National Cheng Kung University

hep-ph, hep-ex, nucl-ex, nucl-th

Submitted: 2026-03-11

Updated: 2026-11-11

Comments: Major revision. The manuscript has been reframed as a model-independent heavy-ion diagnostic for new particles hidden beneath known quarkonium resonances. No claim of evidence for a new state is made. Added a reorganized template-level framework, heavy-ion bias scaling, a Upsilon(1S) stress-test example, sensitivity maps, limitations, updated references, and an AI-assistance declaration

License: http://creativecommons.org/licenses/by-nc-nd/4.0/

Importance score: 82/100

The gist: Proton-proton and heavy-ion measurements are usually interpreted within separate theoretical and experimental frameworks…

Key concepts

Cross-Environment Closure Principle
This principle requires fitting conventional pp and heavy-ion sectors separately but demanding that any candidate new physics contribution satisfies one shared physical rule across both measurements. The diagnostic is powerful only if the candidate produces a correlated change that cannot be explained by independently tuning the standard models.
Propagation of Consistency Observables
The same underlying pp production ratio propagates into heavy-ion observables, such as $v_2$. This means shifts in heavy-ion results are dependent on how the conventional pp spectrum is modeled. The resulting changes are often harder (more pronounced) at higher transverse momentum ($p_T$) because the hidden component is more energetic.
Cross-Environment Diagnostics
This diagnostic method tests for new physics by requiring consistency between different collision systems. Instead of looking at single metrics like $R_{AA}$ or $v_2$ in isolation, it looks for linked dependencies across observables like mass shape and production spectrum. This exposes repeated absorption if the shared component is not truly unmodeled.

Terminology

Summary

Proton-proton and heavy-ion measurements are usually interpreted within separate theoretical and experimental frameworks, even when the same reconstructed final state is measured and the pp result provides or constrains the elementary reference for nuclear observables The separation creates a potential blind spot: an omitted contribution can be absorbed into production or signal-model parameters in pp collisions and then be reinterpreted through independent nuclear-medium parameters in heavy-ion collisions We propose cross-environment closure as a complementary search principle

Cross-Environment Closure Principle

The central proposal is to fit conventional pp and heavy-ion sectors with their own parameters, but require any candidate new-physics contribution to obey one common physical hypothesis across them Let Dpp and DAA denote two sets of observables measured for the same reconstructed final state The diagnostic has power only when the candidate produces at least one correlated change that cannot be reproduced by independent retuning of the conventional descriptions

Illustrative Examples with Quarkonium

Quarkonium is used as a controlled illustration because it is measured through the same narrow dilepton structures in pp, pA, and AA collisions, while its production and medium response are described by distinct sets of models The central proposal is simple: fit the conventional pp and heavy-ion sectors with their own parameters, but require any candidate new-physics contribution to obey one common physical hypothesis across them The relevant evidence is not a single value of RAA or v2, both of which are themselves major heavy-ion observables

Propagation of Consistency Observables

The same pp production ratio therefore propagates into both systems The final equation for the AA sample is vfit2 = vQ2 + ϵAArpp(RXAA/RQAA)vX2 / (1 + ϵAArpp(RXAA/RQAA)) The resulting shifts are pT dependent because the same component that was hidden by retuning the pp spectrum is harder than the conventional contribution

Practical Implementation and Limitations

A practical implementation would proceed as follows: 1. define a common candidate contribution in all relevant collision systems, including its mass, decay structure, and production dependence 2. p. 7

Where the paper says it

5 Practical use and limitations A practical implementation would proceed as follows: 1. define a common candidate contribution in all relevant collision systems, including its mass, decay structure, and production dependence; 2.

retain the conventional sector-specific parameters in the pp and nuclear descriptions rather than forcing the two models to be identical 3. p. 7
Where the paper says it

define a common candidate contribution in all relevant collision systems, including its mass, decay structure, and production dependence; 2. retain the conventional sector-specific parameters in the pp and nuclear descriptions rather than forcing the two models to be identical; 3.

fit mass shape, production spectrum, and angular information jointly enough to constrain the candidate in pp The method does not replace a full experimental likelihood

Conclusion

We have proposed cross-environment closure as a diagnostic for new physics in proton-proton and heavy-ion collisions The central observation is that a missing contribution can be hidden more than once: first through production or signal-model freedom in pp collisions, and again through independent nuclear-medium parameters in AA collisions A definitive search would require real detector responses, covariances, external channels, and a concrete model High-energy and heavy-ion analyses can provide more information when they test the same missing contribution together than when each sector is allowed to absorb it separately The broader message is nevertheless independent of those details

Acknowledgments

This work was supported by Academia Sinica, National Cheng Kung University, and the National Science and Technology Council (NSTC) of Taiwan The numerical examples are generated from the toy response models described in the text and are intended as methodological demonstrations No experimental data are analyzed in this work The figure-generation code is provided with the journal submission as ancillary material and is available from the author upon reasonable request A Toy-model details and signed mass scan uses SQ(pT) = A (1 + pT/p0 - n). The conventional component has AQ = 4. p. 1

Where the paper says it

It nevertheless creates an identifiability risk if the same omitted component is assigned different meanings in the two sectors. The central proposal is therefore simple: fit the conventional pp and heavy-ion sectors with their own parameters, but require any candidate new-physics contribution to obey one common physical hypothesis across them.

0 × 106, p0,Q = 4. p. 9
Where the paper says it

(16) The conventional component has AQ = 4. 0 × 106 , p0,Q = 4.

p. 9
Where the paper says it

(16) The conventional component has AQ = 4. 0 × 106 , p0,Q = 4.

8 GeV, and nQ = 5. p. 4
Where the paper says it

Its role is to reveal a common component that may otherwise be interpreted separately in the two collision sectors. 4 Controlled illustrations The examples use one common injection, fX = 5% at pT = 20 GeV and ∆m = +25 MeV.

p. 4
Where the paper says it

Its role is to reveal a common component that may otherwise be interpreted separately in the two collision sectors. 4 Controlled illustrations The examples use one common injection, fX = 5% at pT = 20 GeV and ∆m = +25 MeV.

65 The resulting fraction rises from about 2% near pT = 6 GeV to about 10% near pT = 55 GeV The deterministic mass Asimov spectrum is generated in 9. p. 9
Where the paper says it

70 GeV, and nfit = 5. The resulting fraction rises from about 2% near pT = 6 GeV to about 10% near pT = 55 GeV.

18 < mµµ < 9. p. 9
Where the paper says it

The deterministic mass Asimov spectrum is generated in 9. 18 < mµµ < 9.

72 GeV with 6 MeV bins It contains NQ = 9500 primary events and NB = 6200 background events, together with a five-percent hidden component The signal model is a one-sided Crystal Ball response with mΥ = 9. p. 9
Where the paper says it

It contains NQ = 9500 primary events and NB = 6200 background events, together with a five-percent hidden component. The signal model is a one-sided Crystal Ball response with mΥ = 9.

4603 GeV, σm = 70 MeV, tail parameters α = 1. p. 9
Where the paper says it

The signal model is a one-sided Crystal Ball response with mΥ = 9. 4603 GeV, σm = 70 MeV, tail parameters α = 1.

5 and n = 5, and ∆m = +25 MeV The forced single-peak fit gives a centroid shift of approximately −1. p. 9
Where the paper says it

The forced single-peak fit uses Poisson-Asimov weights and floats the signal normalization, centroid, width, α, background normalization, and exponential slope. It gives a centroid shift of approximately −1.

2 MeV The paper is 2603. p. 0
Where the paper says it

∗Email: yiyang429@as. tw 1 arXiv:2603.

11097 The authors used AI-assisted language tools to help with manuscript organization, wording refinement, literature searches, and code/text editing The author reviewed and edited all AIassisted content and takes full responsibility for the scientific ideas, calculations, interpretation, references, and final text of the manuscript

References

[1] S. Knapen, T. Lin, H. K. Lou and T. Melia, Phys. Rev. Lett. 118, 171801 (2017) [2] R. Bruce et al., J. Phys. G 47, 060501 (2020) [3] M. Drewes, A. Giammanco, J. Hajer, M. Lucente and O. Mattelaer, Phys. Rev. Lett. 124, 081801 (2020) [4] Yiyang Yang and C. p. 0

Where the paper says it

Cross-Environment Diagnostics for New Physics in Proton-Proton and Heavy-Ion Collisions Yi Yang∗1,2 1 Institute of Physics, Academia Sinica, Taipei 11529, Taiwan 2Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan Abstract Proton-proton and heavy-ion measurements are usually interpreted within separate theoretical and experimental frameworks, even when the same reconstructed final state is measured and the pp result provides or constrains the elementary reference for nuclear observables. This separation creates a potential blind spot: an omitted contribution can be absorbed into production or signal-model parameters in pp collisions and then be reinterpreted through independent nuclear-medium parameters in heavy-ion collisions.

-W. Lin, JHEP 07, 082 (2022) [5] S. Chatrchyan et al. (CMS Collaboration), Phys. p. 1
Where the paper says it

The numerical benchmark is a controlled response stress test, not a claim that a five-percent near-degenerate state survives existing constraints. Dedicated resonance searches, other decay channels, e +e − measurements, and collaboration-specific detector calibrations remain independent and potentially stronger controls.

p. 1
Where the paper says it

The numerical benchmark is a controlled response stress test, not a claim that a five-percent near-degenerate state survives existing constraints. Dedicated resonance searches, other decay channels, e +e − measurements, and collaboration-specific detector calibrations remain independent and potentially stronger controls.

p. 1
Where the paper says it

The numerical benchmark is a controlled response stress test, not a claim that a five-percent near-degenerate state survives existing constraints. Dedicated resonance searches, other decay channels, e +e − measurements, and collaboration-specific detector calibrations remain independent and potentially stronger controls.

Rev. Lett. 110, 081802 (2013) [6] A. Tumasyan et al. (CMS Collaboration), Phys. Lett. B 835, 137397 (2022) [7] A. M. Sirunyan et al. (CMS Collaboration), Phys. Lett. B 790, 270 (2019) [8] A M Sirunyan et al., Phys. Lett. B 819, 136385 (2021) [9] M Butenschoen and B. A. Kniehl, Phys. Rev. Lett. 106, 022003 (2011) [10] M Butenschoen and B. p. 9
Where the paper says it

(16) The conventional component has AQ = 4. 0 × 106 , p0,Q = 4.

A. Kniehl, Phys. Rev. Lett. 108, 172002 (2012) [11] K.-T. Chao, Y.-Q. Ma, H.-S. Shao, K Wang and Y.-J Zhang, Phys. Rev. Lett. 108, 242004 (2012) [12] B Gong, L.-P Wan, J.-X Wang and H.-F Zhang, Phys. Rev. Lett. 110, 042002 (2013) [13] P Faccioli, M Ara´ujo, V Kn¨unz, I Kr¨atschmer, C Louren¸co and J Seixas, Phys. Lett. B 773, 476 (2017) [14] P Faccioli and C Louren¸co, Eur. Phys. J. C 79, 457 (2019) [15] X Du, M He and R Rapp, Phys. Rev. C 96, 054901 (2017) [16] A Islam and M Strickland, JHEP 03, 235 (2021) [17] N Brambilla, M A Escobedo, M Strickland, A Vairo, P Vander Griend and J H Weber, JHEP 05, 136 (2021) [18] N Brambilla, M A Escobedo, M Strickland, A Vairo, P Vander Griend and J H Weber, Phys. Rev. D 104, 094049 (2603. p. 0
Where the paper says it

∗Email: yiyang429@as. tw 1 arXiv:2603.

11097 [19] X Yao, W Ke, Y Xu, S A Bass and B M¨uller, JHEP 01, 046 (2603. p. 0
Where the paper says it

∗Email: yiyang429@as. tw 1 arXiv:2603.

11097 [20] E G Ferreiro and J.-P Lansberg, JHEP 10, 094 (2603. p. 0
Where the paper says it

∗Email: yiyang429@as. tw 1 arXiv:2603.

11097 [21] A Andronic et al., Eur. Phys. J. A 60, 88 (2603. p. 0
Where the paper says it

∗Email: yiyang429@as. tw 1 arXiv:2603.

11097 [22] G T Bodwin, E Braaten and G P Lepage, Phys. Rev. D 51, 1125 (Erratum Phys. Rev. D 55, 5853 (9) [23] P Cho and A K Leibovich, Phys. Rev. D 53, 150 (1996) [24] P Artoisenet, J Campbell, J.-P Lansberg, F Maltoni and F Tramontano, Phys. Rev. Lett. 101, 152001 (2603. p. 0
Where the paper says it

∗Email: yiyang429@as. tw 1 arXiv:2603.

11097 [25] G T Bodwin, H S Chung, U.-R Kim and J Lee, Phys. Rev. Lett. 113, 022001 (Erratum Phys. Rev. D 55, 5853 (9) [26] P Faccioli, C Louren¸co and J Seixas, Phys. Rev. D 81, 111502(R) (Erratum Phys. Rev. D 81, 112502(R) [27] X Yao, W Ke, Y Xu, S A Bass and B M¨uller, JHEP 03, 235 (Erratum Phys. Rev. D 55, 5853 (9) [28] G T Bodwin, H S Chung, U.-R Kim and J Lee, Phys. Rev. Lett. 113, 022001 (Erratum Phys. Rev. D 55, 5853 (9) [29] P Faccioli, C Louren¸co and J Seixas, Phys. Rev. D 81, 111502(R) [30] X Yao, W Ke, Y Xu, S A Bass and B M¨uller, JHEP 03, 235 (Erratum Phys. Rev. D 55, 5853 (9) [31] G T Bodwin, H S Chung, U.-R Kim and J Lee, Phys. Rev. Lett. 113, 022001 (Erratum Phys. Rev. D 55, 5853 (9) [32] P Faccioli, C Louren¸co and J Seixas, Phys. Rev. D 81, 111502(R) [33] X Yao, W Ke, Y Xu, S A Bass and B M¨uller, JHEP 03, 235 (Erratum Phys. Rev. D 55, 5853 (9) [34] G T Bodwin, H S Chung, U.-R Kim and J Lee, Phys. Rev. Lett. 113, 022001 (Erratum Phys. Rev. D 55, 5853 (9) [35] P Faccioli, C Louren¸co and J Seixas, Phys. Rev. D 81, 111502(R) [36] X Yao, W Ke, Y Xu, S A Bass and B M¨uller, JHEP 03, 235 (Erratum Phys. Rev. D 55, 5853 (9) [37] G T Bodwin, H S Chung, U.-R Kim and J Lee, Phys. Rev. Lett. 113, 022001 (Erratum Phys. Rev. D 55, 5853 (9) [38] P Faccioli, C Louren¸co and J Seixas, Phys. Rev. D 81, 111502(R) [39] X Yao, W Ke, Y Xu, S A Bass and B M¨uller, JHEP 03, 235 (Erratum Phys. Rev. D 55, 5853 (9) [40] G T Bodwin, H S Chung, U.-R Kim and J Lee, Phys. Rev. Lett. 113, 022001 (Erratum Phys. Rev. D 55, 5853 (9) [41] P Faccioli, C Louren¸co and J Seixas, Phys. Rev. D 81, 111502(R)

Toy-model Details

The pp example uses SQ(pT) = A (1 + pT/p0 - n) The conventional component has AQ = 4.0 × 106, p0,Q = 4.8 GeV, and nQ = 5.65 The harder component uses p0,X = 6. p. 6

Where the paper says it

The solid curve is a forced single-peak fit, the dashed curve shows the primary component plus background, and the dotted curve shows the hidden contribution. 3 Propagation across collision systems Figure 3 uses the same harder component as Fig.

0 GeV and nX = 5. p. 4
Where the paper says it

Its role is to reveal a common component that may otherwise be interpreted separately in the two collision sectors. 4 Controlled illustrations The examples use one common injection, fX = 5% at pT = 20 GeV and ∆m = +25 MeV.

00 and is normalized to fX = 5% at pT = 20 GeV The representative relative uncertainty increases linearly from 2. p. 9
Where the paper says it

00 and is normalized to fX = 5% at pT = 20 GeV. The representative relative uncertainty increases linearly from 2.

8% at pT = 6 GeV to 8. p. 4
Where the paper says it

Its role is to reveal a common component that may otherwise be interpreted separately in the two collision sectors. 4 Controlled illustrations The examples use one common injection, fX = 5% at pT = 20 GeV and ∆m = +25 MeV.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Cross-environment closure diagnostics allow AI systems to perform joint hypothesis testing across different experimental regimes, preventing a single unmodeled contribution from being absorbed independently into each system. This enables AI to search for common physical hypotheses rather than relying on ion-specific production enhancements or special triggers.

  2. AI systems can be improved by implementing projection coefficient calculations, such as the effective projection coefficient epsilon b e, which quantifies how much of an injected X yield in analysis bin b is absorbed into the fitted conventional quarkonium yield in environment e. This allows for a rigorous quantification of the interdependence between sector parameters and observables.

  3. The improved AI system can perform consistency checks by requiring any candidate new-physics contribution to obey one common physical hypothesis across them when fitting conventional pp and heavy-ion sectors simultaneously. This shifts the search strategy from independent fits to a simultaneous closure test, exposing repeated absorption if the shared component is not truly unmodeled.

  4. AI can be trained to utilize observables like mass shape, production spectrum, angular information, and nuclear response as joint consistency observables for new physics searches. The system will be capable of testing whether a common mass offset, a decay-angular pattern, or a linked dependence across the pp spectrum and nuclear observables is present rather than just looking at single values like RAA or v2.

  5. The AI can incorporate modeling freedom by fitting conventional descriptions in both environments while requiring that the shared unmodeled contribution obey one common physical hypothesis. This addresses the model freedom where different microscopic ingredients reproduce overlapping subsets of suppression and anisotropy measurements with different interpretations.

Abstract

Particle-physics searches and heavy-ion measurements probe many of the same final states, but their results are often interpreted separately. We propose testing new contributions hidden beneath established resonances by requiring a common candidate hypothesis across collision systems. Different nuclear responses change the relative populations of unresolved components and link proton-proton production and mass distributions to nuclear modification and azimuthal anisotropy. We derive these relations and, for component mass distributions of the same shape within each system, a relation between total nuclear modification and the calibrated shift in the mean invariant mass in which quarkonium yield suppression cancels. The candidate component's nuclear modification remains an input to this test. An example near the Υ(1S) follows a component absorbed into proton-proton fits into nuclear observables; for the specified responses, its fraction rises from five percent in proton-proton collisions to thirteen percent in nucleus--nucleus collisions. These results provide conditional consistency tests linking particle and nuclear measurements. Their use requires constrained candidate responses and controlled quarkonium and detector uncertainties; the statistical gain from adding nuclear data must be evaluated with the actual event samples.

Related papers