Reducing the Power Required for Multi-UAV Tethered Payload Transportation via a Rotating Equilibrium

arXiv:2603.06955 · cs.RO, cs.SY, eess.SY · Submitted 2026-03-07 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: I'm Rosa.

Dev: And I'm Dev, here with Taro.

Rosa: We're looking at the paper: "Reducing the Power Required for Multi-UAV Tethered Payload Transportation via a Rotating Equilibrium".

Title and authors: Rosa: Let's talk about the "Reducing the Power Required for Multi-UAV Tethered Payload Transportation via a Rotating Equilibrium" paper by Eric Foss, Andrew Tai, Carlo Bosio, and Mark W. Mueller. I want to start with what this title suggests—it’s all about making collaborative aerial transport more efficient.

Dev: And the authors are tackling a system where you have multiple quadcopters carrying a payload via tethers, and their main focus is finding that rotating equilibrium condition that cuts down the energy needed for lifting.

Taro: From my side, I'm wondering if this rotation condition is something you can actually hit in real-world flight conditions without getting thrown off balance or losing control stability.

Rosa: That’s a fair question, Taro. The authors design an LQR controller to manage the thrust vectors based on these physical parameters—like the mass of each quadcopter, the payload, and the tether length—to keep that specific rotation happening safely.

Dev: They model it using two identical quadcopters of mass mq transporting a point-mass payload of mass mp via massless tethers of length l, and they define an earth-fixed coordinate frame E as inertial and a control frame C that rotates about the shared vertical axis at a constant rate omega C.

Rosa: So, they set up this whole mathematical framework to show exactly how this rotation allows the vehicles to achieve purely vertical thrust under certain conditions.

Taro: But what’s the actual setup? How are they defining that rotating control frame C relative to the earth-fixed frame E? That sounds complicated when you're just trying to keep a robot stable outside a lab.

Dev: They define the position of quadcopter one in the inertial frame as x E one equals x E C plus R E C r C one where r C one is defined as l times the vector with sine beta zero cosine beta components <ref:2603.06955#pg1>.

Rosa: So they’re using that angle beta to define the geometry of the tether connection, and that geometry is what determines how the centrifugal forces manifest in terms of horizontal tension.

The paper's summary: Dev: To summarize this paper, they are looking for specific equilibrium conditions where the position of the control frame C relative to Earth fixed frame E is constant and its acceleration is zero in that rotating frame.

Taro: So, it’s not a static system in the inertial frame; it’s dynamic motion that stays stable relative to a moving reference point. That's an interesting way to look at stability.

Rosa: It means they are analyzing the dynamics by looking at how the vehicles move with respect to that rotating control frame C, and they find specific velocity and acceleration values for quadcopter one in that frame.

Dev: They calculate that the equilibrium velocity of quadcopter one relative to C is omega c cross r C one which gives them a concrete expression for how fast it has to be spinning just to maintain that setup <ref:2603.06955#pg1>.

Taro: That expression involving omega c times l times sine beta zero cosine beta sounds like the key constraint they are working with when they try to keep the formation stable.

Rosa: And then, by plugging those equilibrium conditions into the payload's dynamics equation, they solve for the tether tension at equilibrium, finding that it equals mq g over two cosine of beta.

The paper's improvements: Dev: The core improvement they highlight is this shift from static equilibrium to rotating equilibrium, which allows for purely vertical thrust when the rotation speed omega C hits a specific value called omega star C.

Taro: So instead of having both vertical lift and some horizontal force component, the system is optimized so it only needs pure vertical lift at that specific spinning rate.

Rosa: That specific value they find, omega star C equals r times mpg squared mq l cosine beta, is what enables that purely vertical thrust condition.

Dev: They compare this to the static case where if you don't rotate—if omega C is zero—you need a thrust magnitude of Ts which includes terms with tan beta squared.

Taro: So, the improvement isn't just saving power; it’s fundamentally changing how the forces are balanced so you can achieve that vertical thrust configuration when rotating.

Rosa: The experimental validation supports this, showing that in indoor motion capture space experiments with a zero point seven kilogram quadcopter and a zero point six kilogram payload, they actually achieved power savings of up to twenty percent by operating at this rotating equilibrium.

Conclusion: Dev: So to wrap up the paper "Reducing the Power Required for Multi-UAV Tethered Payload Transportation via a Rotating Equilibrium," the main point is that rotation about a vertical axis enables purely vertical thrust, which makes collaborative transport more power-efficient.

Rosa: They showed that at optimal spinning conditions, where omega C equals omega star C, you get a purely vertical thrust magnitude of mpg squared plus mq g.

Taro: What this means for the listener is that for applications where endurance matters and you're dealing with heavy payloads, this rotating equilibrium strategy offers a real path to increasing flight time.

Dev: The authors are also pointing out that they haven't fully addressed how robustness to external perturbations affects these rotating conditions, which is an area they plan to explore in future work.

Rosa: They mention extending this approach naturally to fixed-wing aircraft for vertical take-off and landing, which could potentially reduce power consumption even more significantly.

Taro: I just want to ask about the limitations—the paper notes that at higher angular velocities, the tether tension alone isn't enough to provide the centripetal acceleration needed for circular trajectories, so they still need the quadcopters to pitch inward and consume more power then.

Dev: That’s a key caveat. So while rotating equilibrium is great for power reduction, if you push the rotation too hard, you run into a situation where you need more thrust just to maintain the path than before.

Rosa: So we've seen how this rotating equilibrium condition can lead to up to twenty percent power savings in real tests, which makes these collaborative aerial solutions way more practically relevant for moving things around <ref:2603.06955#pg1>.

Eric Foss, Andrew Tai, Carlo Bosio, Mark W. Mueller

University of California Berkeley

cs.RO, cs.SY, eess.SY

Submitted: 2026-03-07

Updated: 2026-11-17

Comments: 8 pages, 9 figures. Submitted to ICRA 2027

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 86/100

The gist: Collaborative aerial transportation of tethered payloads is fundamentally limited by space, power, and weight constraints <ref:2603.06955#pg2>.

Key concepts

Rotating Equilibrium
This is a specific flight condition where the system rotates around a vertical axis at a constant angular velocity. This rotation generates centrifugal forces that provide the necessary horizontal tension in the tethers, allowing each quadrotor to focus its thrust purely on vertical lift.
Purely Vertical Thrust
When operating at optimal rotating conditions, the system configuration allows each quadrotor to produce only vertical thrust. This is achieved because the centrifugal force from rotation supplies the required horizontal tether tension, meaning no additional horizontal force needs to be generated by the rotors themselves.
LQR Controller
A Linear Quadratic Regulator (LQR) controller is a control strategy used to manage the quadrotors. It calculates and adjusts the thrust vectors in real-time based on desired flight conditions and system parameters, ensuring stability while achieving the desired equilibrium state.
Tether Force Characterization
This describes how the tension in the massless tethers between vehicles and payload is calculated. The force depends on both the distance between components and their relative velocities, providing a dynamic link that helps determine the required tether tension for equilibrium.

Terminology

Summary

Collaborative aerial transportation of tethered payloads is fundamentally limited by space, power, and weight constraints <ref:2603. p. 006955#pg2>. By operating the tether-suspended flying system at a rotating equilibrium, centrifugal forces provide the necessary horizontal tether tension allowing each quadrotor to generate purely vertical thrust and thus reducing the total force (and power) required compared to an equilibrium where the thrusts are not vertical <ref:2603. p. 006955#pg3>. Results demonstrate that rotating equilibria can reduce power consumption relative to static lifting by up to 20% making collaborative aerial solutions more practically relevant <ref:2603. p. 006955#pg2>.

System Dynamics and Equilibrium

The system dynamics are modeled considering two identical quadcopters of mass mq transporting a point-mass payload of mass mp via massless tethers of length l <ref:2603.06955#pg3>. The quadcopters’ linear dynamics in the Earthfixed frame are given by mqx¨E i = Ti3E Bi + mqgE + fd,i − FiˆrE i <ref:2603. p. 106955#pg3>. The tether force characterization providing a dynamic link between the vehicles and payload is Fi = kT (∥ri∥ − l) + cT˙ ∥ri∥ <ref:2603. p. 106955#pg3>.

Control Strategy

A Linear Quadratic Regulator (LQR) controller is designed on the first-order system model expressed in the non-inertial C frame to control the thrust vectors of the vehicles <ref:2603.06955#pg4>. The LQR feedback matrix K directly depends on the system’s physical parameters (mq, mp, l), desired flight conditions (ωC, β), and the LQR cost J = Z ∞ t=0 (sT Qs + uT Ru)dt <ref:2603. p. 206955#pg4>. The state s ∈ R18 consists of the positions and velocities of the payload and vehicles relative to E expressed in components in the control frame, i. p. 2e. s = xC p, x˙C p, xC 1, x˙C 1, xC 2, x˙C 2T <ref:2603. p. 006955#pg4>.

Power Analysis Comparison

A first-principles comparison of the power consumption of a rotating two-vehicle system compared to a static system is provided by analyzing the equilibrium conditions in the 1C −3C plane <ref:2603.06955#pg5>. The required thrust magnitude T is given by T = s mpg squared + mqg squared + sin β mpg squared cos β - mqωCl squared <ref:2603. p. 306955#pg5>. In the optimal rotating conditions, a purely vertical thrust is achieved when ωC = ω∗C resulting in T∗r = mpg 2+mqg <ref:2603. p. 306955#pg5>.

Experimental Validation

Real-world flight tests support the power consumption predictions through indoor motion capture space experiments using quadcopters of 0.7 kg mass and a payload of 0. p. 16 kg mass <ref:2603. p. 006955#pg6>. The experimental findings show that power savings of up to 20% are achievable by having the system operate at a rotating equilibrium <ref:2603. p. 506955#pg2>. The power consumption increases as β increases for the static case while a much flatter trend is observed in the rotating case when ωC = ω∗C. p. 5

Conclusion and Future Work

The key insight is that rotation about a vertical axis enables the vehicles to produce purely vertical thrust making the transport system more power-efficient. p. 5 Future work includes analysis on how robustness to external perturbations is affected by the rotating conditions. p. 5 p. 5 The approach naturally extends to fixed-wing aircraft which could be used for vertical take-off and landing transportation of payloads using our method. p. 5 The paper concludes that power savings of up to 20% are achievable by having the system operate at a rotating equilibrium <ref:2603. p. 506955#pg2>.

REFERENCES

arXiv:2603.06955v2 [cs. p. 0RO] 28 Aug 2026

--- Page 1 ---

Energy-Efficient Collaborative Transport of Tether-Suspended Payloads via Rotating Equilibrium<ref:2603.06955#pg2>

--- Page 2 ---

Collaborative aerial transport enables teams of quadrotors to carry payloads exceeding the capability of individual vehicles <ref:2603.06955#pg3>. The tethered strategy allows the vehicles to distance from each other and the payload, avoiding undesired aerodynamics interactions, but it is subject to complex and often unwanted internal swing dynamics <ref:2603. p. 006955#pg3>. The rigid connection strategy allows more precise control, but is typically more sensitive to hard-to-model payload vibrational modes <ref:2603. p. 006955#pg3>. However, the flight endurance achieved by all these approaches remains severely limited by battery capacity making energy efficiency a central design consideration <ref:2603. p. 006955#pg3>. In fact, flight endurance is one of the main issues limiting the deployment of aerial robots for transportation <ref:2603. p. 006955#pg3>. Several ideas have been proposed to increase flight endurance of multicopters [11] <ref:2603. p. 006955#pg3>. Example methods of practical use include power beaming [12] and in-air battery recharging [13] <ref:2603. p. 006955#pg3>.

--- Page 3 ---

We consider two identical quadcopters of mass mq transporting a point-mass payload of mass mp via massless tethers of length l <ref:2603.06955#pg4>. We introduce an earth-fixed coordinate frame E which we assume to be inertial <ref:2603. p. 106955#pg4>. With reference to Fig. p. 1 2, we also introduce a control frame C with the position of its origin denoted as xC, which coincides with the desired position of the center of mass of the payload <ref:2603. p. 106955#pg4>. The control frame rotates at a constant rate ωC = [0, 0, ωC]T about a shared vertical axis with the inertial frame <ref:2603. p. 106955#pg4>. We denote xi as the position of quadcopter i, xp as the position of the payload <ref:2603. p. 106955#pg4>. ˆri represents the unit vector pointing from the payload to quadcopter i, so that ri = lˆri is the position of quadcopter i with respect to the payload <ref:2603. p. 106955#pg4>. We denote with a superscript the components of a vector in a given reference frame <ref:2603. p. 106955#pg4>. For example vE describes the components of the vector v in the reference frame E <ref:2603. p. 106955#pg4>.

--- Page 4 ---

We are interested in equilibria relative to a rotating control frame C resulting in the following equilibrium conditions: x¯˙E C = constant x¯¨E C = 0 ¯r˙C i = 0 ¯¨rC i = 0 <ref:2603.06955#pg5>. where xE C represents the position of the control frame C relative to the Earth-fixed frame, and rC i represents the position of quadcopter i with respect to the payload position xp, which in equilibrium is at the origin of the control frame <ref:2603. p. 206955#pg5>. Note that these equilibrium conditions do not result in a static system with respect to the inertial frame <ref:2603. p. 206955#pg5>. For brevity, we show this by analyzing only quadcopter 1 <ref:2603. p. 206955#pg5>. The position of quadcopter 1 in the inertial frame is xE 1 = xE C + RE E C rC 1, rC 1 = l [sin β0 cos β] <ref:2603. p. 206955#pg5>. Taking the first time derivative of (5) yields: x˙E 1 = x˙E C + R E C r˙C 1 + R˙ E C rC 1 <ref:2603. p. 206955#pg5>. Noting the second equilibrium conditions of (4), we can see the equilibrium velocity of quadcopter 1 with respect to the moving control frame C, represented in the control frame coordinate system, is x¯˙E 1 − x¯˙E C = ωc × rC 1 = [0 ωcl sin β0 0] <ref:2603. p. 206955#pg5>. Taking the second time derivative of (5) (omitted for brevity) and noting the first and third equilibrium conditions of (4), we derive the equilibrium acceleration of quadcopter 1 with respect to the moving control frame C, represented in the control frame coordinate system, is x¯¨E 1 = [-ω2Cl sin β0 0] <ref:2603. p. 206955#pg5>. Note for quadcopter 2, the equilibrium velocity and acceleration with respect to the moving control frame C is the negative of (7) and (8) respectively, and can be obtained by setting rC 2 = l[-sin β, 0 cos β]T <ref:2603. p. 206955#pg5>. Substituting the first equilibrium condition of (4) into the dynamics of the payload shown in (2) yields: 0 = mpg + fd,p + X i Firi <ref:2603. p. 206955#pg5>. We assume the payload’s drag is minimal due to low translational velocities and solve for the tether tension at equilibrium: F¯ 1 = F¯ 2 = mqg / 2 cos β <ref:2603. p. 206955#pg5>.

--- Page 5 ---

Fig. 3. Block diagram of the system architecture<ref:2603. p. 206955#pg6>. The higher level LQR controller runs at 50 Hz, while the quadcopters’ onboard attitude controllers run at 500Hz, providing an effective separation of timescales <ref:2603. p. 206955#pg6>.

--- Page 6 ---

In (18), it is interesting to note that the vertical component does not depend on β or ωC, rather only the total system weight <ref:2603.06955#pg7>. The horizontal component, however, depends on both. p. 3 Trivially, we note that the horizontal component is 0 when β = 0 (i. p. 3e. when the two quadcopters would collide with each other) <ref:2603. p. 306955#pg7>. Non-trivially, for any non-zero value for β, there is an angular velocity value ω∗C which results in zero horizontal thrust: ω∗C = r mpg 2mql cos β <ref:2603. p. 306955#pg7>. This leads, in the optimal rotating conditions, to a purely vertical thrust: T∗r = mpg 2+mqg <ref:2603. p. 306955#pg7>. On the other hand, if ωC = 0 (i. p. 3e. in the static case) we have a required thrust magnitude of Ts = rmpg 2+mqg squared + mpg squared tan β squared <ref:2603. p. 306955#pg7>.

--- Page 7 ---

Fig 7 shows the recorded power consumption between the static and rotating equilibrium for various reference tether angles β in static and rotating conditions. Compared to the theoretical predictions (see Fig. p. 4 5), the absolute power consumption values are consistently ∼ 30% greater, but the trends are well captured by the first-principle model. p. 4 The power consumption increases as β increases for the static case while we observe a much flatter trend in the rotating case when ωC = ω∗C. p. 5 For low β values the standard deviation bars from the two cases intersect, but for higher β values the separation widens showing a statistically significant increase in the power-efficiency for the rotating case. p. 5 It is also shown for larger β, the power consumption in the optimal rotating case increases instead of remaining flat like the analysis suggests which could be due to increased air resistance. p. 5

--- Page 8 ---

Fig 5. Plot of power consumption (according to (23)) versus tether angle for both the static case and the optimal spinning case, where ωC = ω∗C. p. 4 As it is possible to observe, in the static case the power consumption grows, approaching infinity as β → 90◦ while in the rotating case it remains constant. p. 4 For higher angular velocities, the tether tension alone is not sufficient to achieve the required centripetal acceleration to maintain quadcopter circular trajectories and thus must quadcopters pitch inward and consume more power. p. 4

--- Page 9 ---

In summary, we proposed a novel perspective on tethersuspended aerial transport using quadcopters. The key insight is that rotation about a vertical axis enables the vehicles to produce purely vertical thrust making the transport system more power-efficient. We conducted a first-principle analysis to predict the efficiency gains achieved by the system rotation and experimentally validated our method through realworld flights confirming the first-principle predictions. p. 5 Our experimental findings show that power savings of up to 20% are achievable by having the system operate at a rotating equilibrium. p. 5 Our results demonstrate the potential of the proposed strategy to extend flight endurance in cooperative aerial transportation tasks and make such systems more practically relevant. p. 5 Future work includes analysis on how robustness to external perturbations is affected by the rotating conditions. Our approach naturally extends to fixed-wing aircraft which could be used for vertical take-off and landing transportation of payloads using our method potentially reducing the power consumption even more significantly. p. 5 Experimental validation in more challenging conditions with imperfect sensor measurements such as outdoor environments is also a promising future direction to further validate the proposed approach in practical settings. p. 5

ACKNOWLEDGMENT

The authors gratefully acknowledge financial support from Rothberg Catalyzer. The experimental testbed at the HiPeRLab is the result of contributions of many people, a full list of which can be found at hiperlab. p. 5berkeley.edu/members/. p. 5

REFERENCES

[1] D. K. Villa, A. S. Brandao, and M. p. 5 Sarcinelli-Filho, “A survey on load transportation using multirotor uavs,” Journal of Intelligent & Robotic Systems, vol. p. 5 98, pp. 267–296, 2020<ref:2603. p. 506955#pg2>.

[2] J. Estevez, G. p. 5 Garate, J. M. Lopez-Guede, and M. p. 5 Larrea, “Review of aerial transportation of suspended-cable payloads with quadrotors,” Drones, vol. p. 5 8, no. 2, p. 35, 2024<ref:2603. p. 006955#pg2>.

[3] X. Zhang, F. Zhang, and P. p. 5 Huang, “Formation planning for tethered multirotor uav cooperative transportation with unknown payload and cable length,” IEEE Transactions on Automation Science and Engineering, 2023<ref:2603. p. 506955#pg2>.

[4] K. Wahba and W. p. 5 Honig, “Efficient optimization-based cable force ¨ allocation for geometric control of a multirotor team transporting a payload,” IEEE Robotics and Automation Letters, vol. p. 5 9, no. 4, pp. 3688–3695, 2024<ref:2603. p. 506955#pg2>.

[5] S. Sun, X. Wang, D. Sanalitro, A. p. 5 Franchi, M. p. 5 Tognon, and J AlonsoMora “Agile and cooperative aerial manipulation of a cable-suspended load,” Science Robotics, vol. p. 5 10, no 107 p eadu8015 <ref:2603. p. 006955#pg2>.

[6] D. Mellinger, M. p. 6 Shomin, N. Michael, and V. p. 6 Kumar, Cooperative Grasping and Transport Using Multiple Quadrotors pp 545–558 Berlin Heidelberg Springer Berlin Heidelberg 2013<ref:2603. p. 606955#pg2>.

[7] B. Mu and P. Chirarattananon “Universal flying objects: Modular multirotor system for flight of rigid objects” IEEE Transactions on Robotics vol 36 no 2 pp 458–471 2019<ref:2603. p. 606955#pg2>.

[8] K. Oishi and T. p. 6 Jimbo “Autonomous cooperative transportation system involving multi-aerial robots with variable attachment mechanism in 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems IROS pp 6322–6328 IEEE 2021<ref:2603. p. 606955#pg2>.

[9] C. Bosio and M. p. 0 W. Mueller “Automated layout and control codesign of robust multi-uav transportation systems IEEE Robotics and Automation Letters 2025<ref:2603. p. 606955#pg2>.

[10] R Ritz and R D’Andrea “Carrying a flexible payload with multiple flying vehicles in 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems pp 3465–3471 IEEE 2013<ref:2603. p. 606955#pg2>.

[11] R Alyassi, M Khonji, A Karapetyan, S C. p. 6-K Chau, K Elbassioni, and C. p. 6-M Tseng “Autonomous recharging and flight mission planning for battery-operated autonomous drones IEEE Transactions on Automation Science and Engineering vol 20 no 2 pp 1034–1046 2022<ref:2603. p. 606955#pg2>.

[12] M-A Lahmeri, M. p. 6 A Kishk, and M. p. 6-S. Alouini “Charging techniques for uav-assisted data collection Is laser power beaming the answer IEEE Communications Magazine vol 60 no 5 pp 50–56 2022<ref:2603. p. 606955#pg2>.

[13] K P Jain and M W Mueller “Flying batteries In-flight battery switching to increase multirotor flight time in 2020 IEEE International Conference on Robotics and Automation ICRA pp 3510–3516 IEEE 2020<ref:2603. p. 606955#pg2>.

[14] B E Jackson, T A Howell, K Shah, M Schwager, and Z Manchester “Scalable cooperative transport of cable-suspended loads with uavs using distributed trajectory optimization IEEE Robotics and Automation Letters vol 5 no 2 pp 3368–3374 2020<ref:2603. p. 606955#pg2>.

[15] M W Mueller and R D’Andrea “Relaxed hover solutions for multicopters Application to algorithmic redundancy and novel vehicles The International Journal of Robotics Research vol 35 no 8 pp 873–889 2016<ref:2603. p. 606955#pg2>.

[16] P Williams and P Lapthorne, and P Trivailo “Circularly-Towed Lumped Mass Cable Model Validation from Experimental Data in AIAA Modeling and Simulation Technologies Conference and Exhibit Keystone Colorado American Institute of Aeronautics and Astronautics August 2006<ref:2603. p. 606955#pg2>.

[17] P Williams and P Trivailo “Dynamics of Circularly Towed Aerial Cable Systems Part 1 Optimal Equilibrium Configurations and Their Stability Journal of Guidance, Control, and Dynamics vol 30 pp 753–765 May 2007<ref:2603. p. 606955#pg2>.

[18] P Williams and W Ockels “Dynamics of towed payload system using multiple fixed-wing aircraft Journal of Guidance, Control, and Dynamics vol 32 no 6 pp 1766–1780 2009<ref:2603. p. 606955#pg2>.

[19] B Chapdelaine, D Rancourt, and G Ledoux “Experimental validation of vert… p. 6

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Reduced power consumption in collaborative aerial transport by up to 20% compared to static lifting by operating at a rotating equilibrium, making collaborative aerial solutions more practically relevant.

  2. Enables a wider range of tether configurations to be used without sacrificing efficiency, allowing for shorter tether lengths without sacrificing system safety due to the reduction in vehicle distance.

  3. Allows quadrotors to generate purely vertical thrust when operating at optimal spinning conditions (omega C = omega star C), reducing steady-state power consumption significantly compared to static equilibrium where each quadrotor must generate both vertical lift and additional horizontal force.

  4. Provides a control strategy for stabilizing rotating equilibria, allowing the system to maintain a desired tether configuration using centrifugal forces to provide necessary horizontal tether tension while allowing each quadrotor to produce purely vertical thrust.

Related papers