Bare and stretched string tyre models with distributed FrBD dynamics

arXiv:2603.02869 · physics.app-ph · Submitted 2026-03-03 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Bare and stretched string tyre models with distributed FrBD dynamics".

Mira: Here's the gist of the paper. This paper presents a novel class of string tyre models with FrBD friction dynamics By modelling the distributed carcass and tread deformations with string-like equations, the resulting formulation leads to a system of semilinear parabolic partial differential equations (PDEs) that describe the evolution of the tyre states without explicitly distinguishing between stick and slip regimes Rigorous stability and passivity analyses are also conducted using a Lyapunov-based approach, establishing boundedness of the distributed states and energy dissipation during rolling contact The proposed Lyapunov function admits a clear physical interpretation as the total elastic energy stored in the tyre, enabling a direct link between mechanical energy storage and frictional dissipation due to slip losses The steady-state and transient behaviours of the model are investigated both numerically and experimentally, revealing that the new formulation can satisfactorily reproduce nonlinear relaxation phenomena excited by step slip inputs Model Formulation The core of the model involves combining a nonlocal constitutive description of tyre structural deformation with a dynamic friction law of FrBD type The governing equations are derived by reinterpreting the constitutive equation algebraically and equating it with the friction model Specifically, Eq.

Kai: (5) is recast as a parabolic form for all nonzero slip velocities The kinematic constraints relate the sliding and rigid relative velocities to the treadband and carcass deflections through Eq.

Mira: (3) Mathematical Character The resulting governing equations exhibit a parabolic character for all inputs, which is a fundamental departure from classical transport-based rolling contact models This parabolic structure naturally introduces diffusive mechanisms that account for relaxation phenomena modulated by the magnitude of the slip and spin inputs Furthermore, this regularization parameter epsilon ensures well-posedness and facilitates numerical implementation by suppressing spurious instabilities The model's parabolic nature allows boundary conditions to be imposed simultaneously at both ends of the contact patch, resulting in smooth deformation profiles without artificial kinks at the contact edges Stability and Passivity Stability and passivity are analyzed using a Lyapunov function that represents the total elastic energy stored in the tyre The derivative of this Lyapunov function along the dynamics yields an inequality (32) which is instrumental in proving stability and passivity properties for the FrSD model Lemma 3.1 establishes that the PDE (26) is uniformly input-to-state stable (ISS) in the spatial H1-norm Corollary 3.

Paper summary: Mira: So, to recap what we've covered, they are taking the existing dynamic friction models like FrBD and coupling them with a distributed contact description derived from string equations. This leads to these parabolic partial differential equations that describe the tyre's evolution without needing an explicit stick or slip distinction.

Kai: Right. The abstract states that this formulation allows them to describe transient rolling contact phenomena without explicitly differentiating between stick and slip behaviors, which is something existing models often struggle with due to their transport-dominated structure.

Lev: That transport-dominated structure is a big hurdle when you move from simulation to real hardware, because it implies these effects might be hard to capture accurately in terms of the actual physical motion.

Mira: And they address that by showing how the structural compliance of the tyre affects the mathematical nature of those governing equations, which isn't always fully explored in previous work. They introduce a regularization parameter epsilon to make sure everything is well-posed and numerically stable.

Kai: That regularization parameter epsilon helps with numerical implementation, it suppresses any spurious instabilities that might pop up when you try to solve these complex parabolic equations.

Lev: So, if we're thinking about implementing this on a real system, we need to know how sensitive the solution is to that epsilon value and what kind of computational overhead it adds.

Mira: The stability analysis they perform uses a Lyapunov function that represents the total elastic energy stored in the tyre, and they prove uniform input-to-state stability in the spatial H1 norm using Lemma three point one <ref:2603.02869#pg3>.

Kai: That means that regardless of how much you perturb the system input, it stays within a certain bound defined by that energy state, which is good news for reliability.

Lev: But what does that H1 norm actually translate to on our hardware? Does it mean bounded strain or bounded force levels under those conditions?

Mira: It establishes boundedness of the distributed states and energy dissipation during rolling contact, directly connecting the stored elastic energy to the frictional losses due to slip.

Conclusion: Kai: So, looking at "Bare and stretched string tyre models with distributed FrBD dynamics," what it really means is that by using these string-like equations, we get a model that captures complex tire behavior—the relaxation phenomena from step slip—in a way that's mathematically sound and physically interpretable.

Mira: The paper moves beyond just modeling the friction law; it integrates the structural deformation directly into the governing dynamics in a way that is parabolic for all inputs. That parabolic character is what allows it to describe things smoothly, without having artificial kinks at the contact edges.

Lev: For me, this suggests that if we can model these tyre interactions accurately with this level of detail, it opens up possibilities for building more robust control systems or even predictive models for vehicle dynamics where tyre interaction is a major factor.

Kai: The authors are focusing on showing that their new formulation works well when they test the steady-state and transient behaviors both through numerical simulations and actual experiments.

Mira: They confirm that this new approach can satisfactorily reproduce those nonlinear relaxation phenomena, which is what makes it relevant for real-world driving conditions where slip happens suddenly.

Lev: I think the paper's implication is that we might be able to use this kind of model to test control strategies against a tyre response that is much closer to what actually happens, instead of relying on simpler transport-based approximations.

Kai: So, in simple terms, it means they built a more detailed mathematical picture of how the tyre deforms and slips simultaneously, and they proved that this new picture is stable and physically grounded by linking energy storage to energy loss.

Mira: The authors are showing that this string tyre model with distributed FrBD dynamics provides a powerful framework for describing transient rolling contact phenomena, which is a key step toward better understanding real tyre-road interaction.

Division of Vehicular Systems, Department of Electrical Engineering, Linköping University · Control Systems Technology Group, Department of Mechanical Engineering, Eindhoven University of Technology

physics.app-ph

Submitted: 2026-03-03

Updated: 2026-11-11

Comments: 25 pages, 10 figures. Under review at Vehicle Systems Dynamics (2nd round)

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: This paper presents a novel class of string tyre models with FrBD friction dynamics By modelling the distributed carcass and tread deformations with string-like equations…

Key concepts

String Tyre Models
This approach models the tyre's structure—the carcass and tread—as continuous strings. This allows researchers to describe how these parts stretch and deform smoothly across the entire tyre surface using string-like equations, rather than just treating them as discrete points.
FrBD Friction Dynamics
This is a specific type of friction law used in the model that describes how much resistance occurs between the tyre and the road. It is integrated into the structural deformation equations to ensure that when the tyre slides or slips, it follows physically realistic frictional behavior.
Semilinear Parabolic PDEs
The governing mathematical equations are parabolic partial differential equations. This structure is key because it introduces 'diffusive' effects, meaning changes in deformation spread smoothly over space and time. This captures how the tyre relaxes after being disturbed by slip inputs.
Lyapunov Function
This is a mathematical tool used to prove stability. In this paper, the function represents the total elastic energy stored in the tyre. By showing that this energy decreases or remains bounded over time, researchers can rigorously prove that the tyre's state will not become unstable.

Terminology

Summary

This paper presents a novel class of string tyre models with FrBD friction dynamics By modelling the distributed carcass and tread deformations with string-like equations, the resulting formulation leads to a system of semilinear parabolic partial differential equations (PDEs) that describe the evolution of the tyre states without explicitly distinguishing between stick and slip regimes Rigorous stability and passivity analyses are also conducted using a Lyapunov-based approach, establishing boundedness of the distributed states and energy dissipation during rolling contact The proposed Lyapunov function admits a clear physical interpretation as the total elastic energy stored in the tyre, enabling a direct link between mechanical energy storage and frictional dissipation due to slip losses The steady-state and transient behaviours of the model are investigated both numerically and experimentally, revealing that the new formulation can satisfactorily reproduce nonlinear relaxation phenomena excited by step slip inputs

Model Formulation

The core of the model involves combining a nonlocal constitutive description of tyre structural deformation with a dynamic friction law of FrBD type The governing equations are derived by reinterpreting the constitutive equation algebraically and equating it with the friction model Specifically, Eq. (5) is recast as a parabolic form for all nonzero slip velocities The kinematic constraints relate the sliding and rigid relative velocities to the treadband and carcass deflections through Eq. p. 2

Where the paper says it

2 via an application of the Implicit Function Theorem. 1 Constitutive equations, kinematic constraints, and friction model The key ingredients for deriving the new string-like description are the constitutive equations, which relate the tyre deformations to the generated forces and moments, the kinematic constraints, linking the sliding and rigid relative velocities to the treadband and carcass deflections, and the friction model.

(3)

Mathematical Character

The resulting governing equations exhibit a parabolic character for all inputs, which is a fundamental departure from classical transport-based rolling contact models This parabolic structure naturally introduces diffusive mechanisms that account for relaxation phenomena modulated by the magnitude of the slip and spin inputs Furthermore, this regularization parameter epsilon ensures well-posedness and facilitates numerical implementation by suppressing spurious instabilities The model's parabolic nature allows boundary conditions to be imposed simultaneously at both ends of the contact patch, resulting in smooth deformation profiles without artificial kinks at the contact edges

Stability and Passivity

Stability and passivity are analyzed using a Lyapunov function that represents the total elastic energy stored in the tyre The derivative of this Lyapunov function along the dynamics yields an inequality (32) which is instrumental in proving stability and passivity properties for the FrSD model Lemma 3.1 establishes that the PDE (26) is uniformly input-to-state stable (ISS) in the spatial H1-norm Corollary 3. p. 8

Where the paper says it

1 (Input-to-state stability (ISS)). For all inputs v¯ ∈ C 1 (C ×R≥0; R 2 )∩L∞([−a, a]×R≥0; R 2 ), rolling speeds Vr ∈ C 1 (R≥0; [Vmin, Vmax]), and ICs u0 ∈ C 2+α([−a, a]; R 2 ), α ∈ (0, 1), satisfying the BCs (26b) and (26c), the PDE (26) is (uniformly) input-to-state stable (ISS) in the spatial H1 -norm.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can accurately simulate transient tyre behaviour by incorporating diffusive effects through a semilinear parabolic PDE formulation, allowing it to reproduce nonlinear relaxation phenomena excited by step slip inputs.

  2. The system gains enhanced robustness in numerical implementation because the regularisation parameter epsilon ensures well-posedness results and suppresses spurious instabilities across the full range of operating conditions.

  3. The model can perform predictive maintenance or control design better because it captures slip-dependent relaxation speeds, which are crucial for high-bandwidth actuation and stability control in vehicle dynamics simulations.

  4. The AI can perform rigorous stability analysis by utilizing a Lyapunov function with a clear physical interpretation as the total elastic energy stored in the tyre, linking mechanical energy storage directly to frictional dissipation due to slip losses.

  5. The system can accurately model vehicle dynamics by providing a physically interpretable, mathematically well-posed, and computationally efficient basis for advanced vehicle dynamics simulations and control-oriented applications.

Abstract

This paper presents a novel class of string tyre models with FrBD friction dynamics. By modelling the distributed carcass and tread deformations with string-like equations, the resulting formulation leads to a system of semilinear parabolic partial differential equations (PDEs) that describe the evolution of the tyre states without explicitly distinguishing between stick and slip regimes. Rigorous stability and passivity analyses are also conducted using a Lyapunov-based approach, establishing boundedness of the distributed states and energy dissipation during rolling contact. The proposed Lyapunov function admits a clear physical interpretation as the total elastic energy stored in the tyre, enabling a direct link between mechanical energy storage and frictional dissipation due to slip losses. The steady-state and transient behaviours of the model are investigated both numerically and experimentally, revealing that the new formulation can satisfactorily reproduce nonlinear relaxation phenomena excited by step slip inputs. The resulting model provides a physically interpretable, mathematically well-posed, and computationally efficient basis for advanced vehicle dynamics simulations and control-oriented applications.

Related papers