Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields".
Mira: Here's the gist of the paper. Magnetic fields are constrained by the geometry and location of their sources, limiting the ability to freely tailor their spatial distribution.
Kai: The authors introduce a general framework to passively convert the magnetic field generated by arbitrary sources into any prescribed desired field within a finite source-free region.
Mira: This method relies on field shaping using linear magnetic materials, enabling source-independent magnetic-field molding.
Kai: General Description of Magnetic Omniconversion The goal is to achieve a desired static magnetic field H(r) in an extended volume independently of the applied sources that produce a field Ha(r).
Paper summary: Kai: So we're talking about this paper called "Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields." It claims they have a general framework to passively convert any magnetic field made by arbitrary sources into any desired field inside a finite space without needing the original sources.
Mira: Right, so the core idea is that you don't care what's making the initial magnetic field; you just use some material properties to shape it into whatever you want in a specific area where there are no sources.
Lev: It really boils down to field shaping using linear magnetic materials, which they call source-independent magnetic-field molding. This means the shape of your target field is independent of the source field you start with.
Kai: Exactly, it's about getting this general recipe so we can create a desired static magnetic field H r in an extended volume without worrying about the original sources Ha r. They show how to write that desired field H as a negative gradient of some scalar potential phi r, which has to satisfy the Laplace equation.
Mira: And they find that if you can define surfaces S zero and S one based on those desired potentials, you can enclose a volume V zero where the magnetic field H r for all points in it will have exactly the shape you want.
Lev: The construction of those bounding surfaces involves defining an equipotential surface S zero and then generating a lateral surface SL from a closed line Gamma zero on that surface by taking differential displacements parallel to the field at each point.
Kai: That differential displacement step is key because it allows them to generate a set of closed lines that ultimately form a surface SL where the field H r is parallel to each point on that lateral surface.
Mira: Then they bound this volume V zero with another equipotential surface S one, which has a potential phi one different from phi zero. This creates the finite region V zero where the desired field shape is locked in, independent of the external source.
Paper summary: Lev: Now, to actually build these surfaces, they use specific magnetic materials for implementation. For those equipotential surfaces S zero and S one, they propose using infinite magnetic permeability media characterized by a permeability mu that goes to infinity inside them.
Kai: So you're talking about perfect magnetic conductors where the H field is always zero inside them, which is practically approximated by soft linear ferromagnetic materials like mu metal or cast iron.
Mira: And for that lateral surface SL, they suggest using zero magnetic permeability materials, or ZMP materials, which have a B field of zero inside them.
Lev: For the lateral surface SL specifically, they mention that superconducting materials are good practical approximations to ZMP materials because in their exterior surface the H field must be parallel to that surface.
Kai: They then show proof-of-principle experiments demonstrating this works for various fields, including a perfectly uniform field H zero z hat.
Mira: For the uniform field example, they create it within a cylindrical region using two infinite magnetic permeability materials and one zero magnetic permeability material, and it holds true regardless of the external source.
Lev: They also showed an exact dipolar field can be generated in any region, which involves specific forms for both the desired field and its scalar potential when you use spherical coordinates.
Kai: And they even manage to generate an exact monopolar field in a large region from any external source, which is a pretty strong result if it holds up.
Mira: The proof-of-principle experiment they run takes a non uniform field from a single planar circular coil and transforms it into a homogeneous field inside the defined spatial region using cast iron and superconducting aluminum.
Lev: The result they show is that when the aluminum tube becomes superconducting, the magnetic field inside becomes uniformly distributed with straight, parallel lines running perpendicular to the tube's cross-section.
Kai: So what this means for us is that even if you have a complicated source field like a coil, you can mold it into something simple and uniform in a specific region just by putting these materials in place.
Paper summary: Mira: It opens up possibilities for magnetic shielding, targeted field delivery, and advanced imaging technologies because we don't have to worry about the initial source configuration to get the final shape.
Lev: From an engineering standpoint, it’s interesting because they detail how this would actually run on real hardware, mentioning that TMR sensors can operate down to millikelvin temperatures with excellent linearity.
Kai: The paper confirms that the theoretical principles extend to electrostatic fields if we could find materials approximating infinite electrical permittivity and statically zero electrical permittivity media.
Mira: But looking at the constraints, they also point out a limitation: if the field source is located symmetrically such that the potentials created in S zero and S one are exactly the same, then you only get a trivial zero magnetic field solution.
Lev: That means if you set up things perfectly symmetrically, this method doesn't generate anything new; it just makes everything go to zero magnitude.
Kai: It also mentions that for the lateral surface SL, if no slit is introduced in that surface, superconductors can be field-cooled so the magnetic field inside V zero remains trapped regardless of later changes in the external sources.
Mira: So while this is a recipe for molding fields, it has its limits regarding symmetry and how you physically realize those perfect materials.
Lev: The practical aspect they touch on involves using high-purity aluminum tubes with specific wall thicknesses and end caps made of cast iron for the experiment setup.
Kai: It’s interesting because they show that the measurement technique used, with 1D linear tunneling magnetoresistance sensors, can map the axial component of the field very precisely across different regions of that tube <ref:2603.01155#pg1>.
Mira: To wrap up on this paper called "Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields," it provides a general recipe for passively converting arbitrary magnetic fields into desired fields using linear magnetic materials.
Lev: The implication is that we might be able to achieve novel field configurations for shielding or imaging without relying on impossibly complex source arrangements.
Kai: It shows a path toward generating specific field shapes in space independently of the initial sources, which is a pretty powerful tool for experimental physics right now.
Conclusion: Segment: Conclusion**
Kai: So we’re wrapping up on "Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields." Basically, this paper shows a general recipe for taking any magnetic field you have and using special materials to force it into any shape you want in a specific area, regardless of what the original source field was.
Mira: Exactly. The authors are proposing this method relies on those linear magnetic materials to mold the field without needing the original sources anymore. It’s about shaping the magnetic space itself rather than just dealing with the input fields.
Lev: From where I sit building real hardware, I see that if you can build these perfect materials—the infinite permeability and zero permeability ones they talk about—then this is a way to control fields in a very specific region without worrying about the source complexity.
Kai: It’s interesting how they manage to show exact results for things like uniform fields and dipolar fields using their proposed construction method. They're claiming they can get any static magnetic field H r you want inside that finite volume V zero.
Mira: The real implication, if this works as described, is that we could engineer magnetic environments on demand. Think about advanced shielding or creating highly specific field patterns for experiments where the source geometry is a major headache to manage.
Lev: I'm looking at the caveat they mentioned—that if the external sources are perfectly symmetric in a certain way, you just get zero field magnitude inside V zero. So it’s not magic; there are still constraints on how you set up your initial situation to make this work.
Kai: That makes sense. So it’s a powerful tool for creating fields we couldn't otherwise reach with the given source setup. It shifts the focus from controlling sources to controlling the space where the field exists.
Mira: Right, and while they address magnetic fields now, they even suggest how this recipe might extend over to electrostatic fields if we can find equivalent materials for those physics too. That would be a huge expansion of what this technique can do across physics domains.
Lev: If we could find materials approximating infinite electrical permittivity and zero electrical permittivity media, that would mean you could mold electric fields just as easily. That’s the next frontier for this kind of theoretical framework.
Jaume Cunill-Subiranas, *, Natanael Bort-Soldevila, Fabian Resare, Nuria Del-Valle, Witlef Wieczorek, †† and Carles Navau‡‡
Departament de Fľ Fisica, Universitat Autonoma de Barcelona · Department of Microtechnology and Nanoscience (MC2), Chalmers University of Technology
physics.app-ph
Submitted: 2026-03-01
Updated: 2026-03-01
Comments: 7 pages, 3 figures (+supplementary information)
Journal ref: Science Advances 12, eaeh5747 (2026)
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 81/100
The gist: Magnetic fields are constrained by the geometry and location of their sources, limiting the ability to freely tailor their spatial distribution.
Key concepts
- Magnetic Omniconversion
- This is a technique that allows you to create any desired static magnetic field inside a space, regardless of what external magnets are creating the original field. It achieves this by using carefully placed magnetic materials to 'mold' or shape the existing field into the target configuration.
- Equipotential Surfaces (S0 and S1)
- These surfaces are key boundaries used to define the volume where the desired field exists. They are created by setting specific magnetic potentials ($ abla imes H = 0$) at different values ($\phi_0$ and $\phi_1$). These surfaces determine the shape of the resulting field, ensuring it matches the target geometry.
- IMP Media
- Infinite-magnetic-permeability media are materials where magnetic permeability ($\mu$) is infinitely large. Inside these materials, the magnetic field ($ ext{H}$) is forced to be zero. They act as perfect boundaries for confining or shaping the magnetic field within a defined region.
- ZMP Materials
- Zero-magnetic-permeability materials are used to construct the lateral surface (SL) of the molding volume. These materials have zero magnetic flux density ($ ext{B}=0$) inside them, and their exterior surface condition ensures that the magnetic field lines are perfectly parallel to that boundary.
Terminology
Summary
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability to freely tailor their spatial distribution. p. 0 Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
Jaume Cunill-Subiranas,1, ∗ Natanael Bort-Soldevila,1 Fabian
Resare,2 Nuria Del-Valle,1 Witlef Wieczorek,2, † and Carles Navau1, ‡
1Departament de Física, Universitat Autònoma de Barcelona, 08193 Bellaterra, Barcelona, Spain
2Department of Microtechnology and Nanoscience (MC2),
Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability
to freely tailor their spatial distribution. We introduce a general framework to passively convert
the magnetic field generated by arbitrary sources into any prescribed desired field within a finite
source-free region. Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
Jaume Cunill-Subiranas,1, ∗ Natanael Bort-Soldevila,1 Fabian
Resare,2 Nuria Del-Valle,1 Witlef Wieczorek,2, † and Carles Navau1, ‡
1Departament de Física, Universitat Autònoma de Barcelona, 08193 Bellaterra, Barcelona, Spain
2Department of Microtechnology and Nanoscience (MC2),
Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability
to freely tailor their spatial distribution. We introduce a general framework to passively convert
the magnetic field generated by arbitrary sources into any prescribed desired field within a finite
source-free region. We introduce a general framework to passively convert
the magnetic field generated by arbitrary sources into any prescribed desired field within a finite
source-free region. Our method relies on field shaping using linear magnetic materials, enabling
source-independent magnetic-field molding.Where the paper says it
Where the paper says it
Where the paper says it
General Description of Magnetic Omniconversion
The goal is to achieve a desired static magnetic field H(r) in an extended volume independently of the applied sources that produce a field Ha(r). This is possible if the region does not contain the sources of Ha. p. 0 General description of magnetic omniconversion
We aim to have, in some extended volume, a desired
static magnetic field H(r), independently of the applied
sources, which produce a field Ha(r). This, which could
seem impossible, is indeed possible if the region does not
contain the sources of Ha. The idea is to reshape the field
lines of the sources by converting them into the desired
field lines using adequate magnetic materials surrounding
the region of interest. The desired field H(r) must first satisfy ∇ · H = 0
and ∇ × H = 0 in a given extended region of space V in
which we assume that there are no sources. One can then
write H(r) = −∇ϕ(r), where ϕ(r) is the scalar magnetic
potential. ϕ satisfies the Laplace equation ∇2ϕ(r) = 0
for r ∈ V. ϕ satisfies the Laplace equation ∇2ϕ(r) = 0
for r ∈ V. Because of the uniqueness theorem for the
solutions of the Laplace equation, if we find a volume
V0 ⊂ V whose surfaces satisfy the boundary conditions
of the desired field, then the magnetic field H(r) for r ∈
V0 will have exactly the same shape as the desired one,
independently of the field created by the sources Ha(r).Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Construction of Field Shaping Surfaces
The procedure involves constructing surfaces S0, S1, and SL to define the volume V0. If a field does not have singular points in V, one starts by choosing a closed line Γ0 belonging to an equipotential surface S0 = ∇ϕ(r) = ϕ0. p. 1 In S0, the field H = −∇ϕ is
perpendicular to the surface. In particular, starting from
all the points belonging to Γ0 ⊂ S0, one could generate
a new closed line considering differential displacements
dl parallel to the field at each point. In S0, the field H = −∇ϕ is
perpendicular to the surface. In particular, starting from
all the points belonging to Γ0 ⊂ S0, one could generate
a new closed line considering differential displacements
dl parallel to the field at each point. Finally, we take another equipotential surface
S1 = {r ∈ V|ϕ(r) = ϕ1}, with ϕ1 ̸= ϕ0. Surfaces S0,
S1, and SL enclose a volume V0 ⊂ V such that in all
their boundary surfaces, the field is either parallel (at the
points belonging to SL) or perpendicular (at the points
belonging to S0 and S1) to the surfaces. The external field fixes the value of
the potentials at S0 and S1. Thus, the inner field’s magnitude depends on the external source, but the shape of
the field does not.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Implementation with Magnetic Materials
The surfaces can be implemented using specific magnetic materials.
Equipotential surfaces (S0 and S1)
These can be implemented with infinite-magnetic-permeability (IMP) media, characterized by permeability µ → ∞, where the H-magnetic field is always zero inside them. These are also known as perfect magnetic conductors. p. 0 It is well known that magnetic materials can alter
field lines by expelling or attracting them, enabling magnetic shielding or field concentration in free space [17–
19]. Transformation optics [20, 21] spurred new methods
to control electromagnetic and magnetostatic fields via
metamaterials [22, 23], enabling perfect lenses or cloaks
[24–29], among other devices [30–36]. This material is also known as a
perfect magnetic conductor [39–41]. Important to note,
soft linear ferromagnetic materials with high permeability (such as mu-metal or cast iron) are excellent practical
approximations to the ideal IMP case [42].Where the paper says it
Where the paper says it
Lateral surface (SL)
The SL surface can be implemented using zero-magnetic-permeability (ZMP) materials, which have the property that the B-field is 0 inside them. In its exterior surface, the field H = B/µ0 must be parallel to the surface, which is the requirement for SL. p. 1 Thus, in its exterior surface, the field
H = B/µ0 must be parallel to the surface. This is the
requirement for the SL surface. Important to note also is
that it has been shown in Ref. [16, 37] that superconducting materials (especially type-I ones, with small London
penetration depth at the working scales) are good practical approximations to ZMP materials.Where the paper says it
Where the paper says it
Representative Examples and Proof-of-Principle Experiment
The paper demonstrates exact generation of various fields using this method.
Uniform Field:
A perfectly uniform field H(x, y, z) = H0zˆ is generated within a cylindrical region limited by two IMP materials and one ZMP material, irrespective of the external source.
Dipolar Field:
An exact dipolar field can be generated in a given region regardless of the source fields. The desired field and scalar potential are given by specific forms in spherical coordinates. p. 2 Following the same principle, one can also generate an
exact dipolar field in a given region, irrespective of the
source fields. In this case, the desired field and the corresponding scalar potential, using standard spherical coordinates (r, θ, φ) and, without loss of generality, assuming
that the desired dipolar field is that of a dipole at the
origin with magnetic moment m = mzˆ, are H(r, θ, φ) =
m
4πr3
2 cos θˆr + sin θθˆ
and ϕ(r, θ, φ) = m
4π
cos θ
r
2 , respectively.Where the paper says it
Monopolar Field:
An exact monopolar field can be generated in a large region of space from any external source.
The proof-of-principle experiment transforms the non-uniform field of a single planar circular coil into a homogeneous field within a defined spatial region using cast iron and superconducting aluminum. p. 3 Proof-of-principle experiment
In the following, we illustrate the basic working principle of our proposed method through a proof-of-concept
experiment. To this end, we fabricated a proof-of-concept
device—an omniconverter—designed to transform the
non-uniform field of a single planar circular coil into a
homogeneous field within a defined spatial region. 3(f)] indicate
a slight improvement in field uniformity towards the tube
ends. Crucially, when the aluminum tube becomes superconducting, a distinct and dramatic change occurs: the magnetic field inside the tube becomes uniformly distributed,
with field lines transforming into straight, parallel lines
perpendicular to the tube’s cross-section [Fig.Where the paper says it
Where the paper says it
Conclusion
The theoretical principles can be extended to electrostatic fields if materials approximating infinite-electrical-permittivity and statically zero-electrical-permittivity media could be found. The procedure is a general recipe to generate the desired field with available sources. p. 5 However, the
same theoretical principles could be extended to electrostatic fields if one could find materials that approximate infinite-electrical-permittivity—ideal conductors—
and statically zero-electrical-permittivity media. The
procedure presented in this work is a general recipe to
generate the desired field with the available sources, so it
is relevant far beyond a particular application. This could be beneficial for improving existing technologies—such as particle traps, medical imaging,
or particle accelerators—by obtaining more controllable
magnetic fields. Moreover, the present work paves the
way for innovative solutions that would otherwise appear
unattainable if they relied on inaccessible magnetic field
configurations.Where the paper says it
Where the paper says it
Acknowledgments
The authors thank Lars Jönsson for assistance in fabricating mechanical parts and Samuel Lara-Avila and Thilo Bauch for advice on magnetic sensors. This work was supported in part by the Horizon Europe 2021-2027 Framework Programme (European Union) through the SuperMeQ project (Grant Agreement number 101080143) and by Spanish project PID2023-149054NB-I00 from MCIU/AEI/1. p. 5 ACKNOWLEDGMENTS
We thank Lars J¨onsson for his assistance in fabricating the mechanical parts of the experiment, and
Samuel Lara-Avila and Thilo Bauch for their valuable
advice on the magnetic sensors. This work was supported in part by the Horizon Europe 2021-2027 Framework Programme (European Union) through the SuperMeQ project (Grant Agreement number 101080143)
and by Spanish project PID2023-149054NB-I00 from
MCIU/AEI/10.Where the paper says it
References
[1] C. Abel et al. p. 5 101087847 (ERC Consolidator
SuperQLev) and the Knut and Alice Wallenberg (KAW)
Foundation through a Wallenberg Academy Fellowship
and Scholar. Abel et al. 101087847 (ERC Consolidator
SuperQLev) and the Knut and Alice Wallenberg (KAW)
Foundation through a Wallenberg Academy Fellowship
and Scholar. Abel et al. Abel et al. A 99, 042112 (2019). A 99, 042112 (2019). Albahri et al. (The Muon g − 2 Collaboration), Phys. A 103, 042208 (2021). Abel et al. , The European Physical Journal C 85, 202
(2025). , The European Physical Journal C 85, 202
(2025). Cosmus and M. Cosmus and M. Parizh, IEEE Transactions on Applied Superconductivity 21, 2104 (2011). Parizh, IEEE Transactions on Applied Superconductivity 21, 2104 (2011). Curcuru, S. Curcuru, S. Mutic, and T. Mutic, and T. Kim, Medical Physics 47, 4101 (2020). Kim, Medical Physics 47, 4101 (2020). Sárkány, P. Sárkány, P. Hattermann, and J. Hattermann, and J. Fortágh,
Phys. Fortágh,
Phys. A 90, 053416 (2014). A 90, 053416 (2014). Hoult and R. Richards, Proceedings of the Royal
Society of London. Series A, Mathematical and Physical
Sciences 344, 311 (1975). Series A, Mathematical and Physical
Sciences 344, 311 (1975). Gabrielse, A. Gabrielse, A. Khabbaz, D. Khabbaz, D. Heimann,
H. Heimann,
H. Kalinowsky, and W. Kalinowsky, and W. 82, 3198
(1999). Zimmermann, Rev. 79,
235 (2007). Romero-Isart, L. Clemente, C. Cirac, Phys. 109, 147205 (2012). Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
Jaume Cunill-Subiranas,1, ∗ Natanael Bort-Soldevila,1 Fabian
Resare,2 Nuria Del-Valle,1 Witlef Wieczorek,2, † and Carles Navau1, ‡
1Departament de Física, Universitat Autònoma de Barcelona, 08193 Bellaterra, Barcelona, Spain
2Department of Microtechnology and Nanoscience (MC2),
Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability
to freely tailor their spatial distribution. We introduce a general framework to passively convert
the magnetic field generated by arbitrary sources into any prescribed desired field within a finite
source-free region. Navau,
Phys. 6, 043046 (2024). 6, 043046 (2024). Hofer et al. Hofer et al. 131, 043603 (2023). Gutierrez Latorre, G. Higgins, A. 19, 054047 (2023). Boozer, Rev. Boozer, Rev. 76, 1071 (2005). 76, 1071 (2005). Helander, Reports on Progress in Physics 77, 087001
(2014). Cunill-Subiranas, and A. Sanchez,
Sci Rep 14, 3653 (2024). Pendlebury, and K. Smith, Journal
of Physics D: Applied Physics 20, 1095 (1987). Peterson, and
S. Kry, Radiation 3, 46 (2023). Kry, Radiation 3, 46 (2023). Jackson, Classical Electrodynamics, 3rd ed. Jackson, Classical Electrodynamics, 3rd ed. (John
Wiley & Sons, 1999). Jackson, Classical Electrodynamics, 3rd ed. (John
Wiley & Sons, 1999). Schurig, and D. Smith, Science 312,
1780 (2006). Smith, and S. Maier,
Science 337, 549 (2012). van Hecke, and M. Wegener,
Nature Reviews Physics 1, 198 (2019). Prat-Camps, and A. Sanchez, Phys. Sanchez, Phys. 109, 263903 (2012). Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
Jaume Cunill-Subiranas,1, ∗ Natanael Bort-Soldevila,1 Fabian
Resare,2 Nuria Del-Valle,1 Witlef Wieczorek,2, † and Carles Navau1, ‡
1Departament de Física, Universitat Autònoma de Barcelona, 08193 Bellaterra, Barcelona, Spain
2Department of Microtechnology and Nanoscience (MC2),
Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability
to freely tailor their spatial distribution. We introduce a general framework to passively convert
the magnetic field generated by arbitrary sources into any prescribed desired field within a finite
source-free region. Bort-Soldevila et al. , APL Materials 12, 021123
(2024). Prat-Camps, O. Romero-Isart, J. Sanchez, Phys. 112, 253901 (2014). Zanner,
and G. Kirchmair, Applied Physics Letters 118, 012601
(2021). Kirchmair, Applied Physics Letters 118, 012601
(2021). Valadares, N. Dorogov,
W. Song, and Y. Song, and Y. Gao, Nature Communications 15, 5816 (2024). Mach-Batlle, M. Del-Valle, and J. PratCamps, Phys. 125, 177204 (2020). Bort-Soldevila, J. 130,
163901 (2021). 130,
163901 (2021). [38] There is an exception: if the field source is located so
symmetrically that the potential created in S0 and S1 is
exactly the same, then the trivial H = 0 solution is the
only solution: the field shape remains unchanged, but its
magnitude goes to zero. Orton and N. Seddon, in Twelfth International Conference on Antennas and Propagation, 2003 (ICAP
2003). Pendry, Opt. Express 11, 755 (2003). 2 (2003) pp. 599–602
vol. Jiang, and W. Sha, Journal of
Applied Physics 119, 064506 (2016). Vanderbemden, and B. Vanderheyden, IEEE Transactions on Magnetics 61, 1 (2025). Vanderheyden, IEEE Transactions on Magnetics 61, 1 (2025). Tinkham, Introduction to Superconductivity, 2nd ed. Tinkham, Introduction to Superconductivity, 2nd ed. (Dover Publications, 2004). Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
Jaume Cunill-Subiranas,1, ∗ Natanael Bort-Soldevila,1 Fabian
Resare,2 Nuria Del-Valle,1 Witlef Wieczorek,2, † and Carles Navau1, ‡
1Departament de Física, Universitat Autònoma de Barcelona, 08193 Bellaterra, Barcelona, Spain
2Department of Microtechnology and Nanoscience (MC2),
Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability
to freely tailor their spatial distribution. We introduce a general framework to passively convert
the magnetic field generated by arbitrary sources into any prescribed desired field within a finite
source-free region. Navau, Phys. B 111, 174530 (2025). B 111, 174530 (2025). Clem, Phys. Clem, Phys. B 43, 7837 (1991). Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
Jaume Cunill-Subiranas,1, ∗ Natanael Bort-Soldevila,1 Fabian
Resare,2 Nuria Del-Valle,1 Witlef Wieczorek,2, † and Carles Navau1, ‡
1Departament de Física, Universitat Autònoma de Barcelona, 08193 Bellaterra, Barcelona, Spain
2Department of Microtechnology and Nanoscience (MC2),
Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability
to freely tailor their spatial distribution. We introduce a general framework to passively convert
the magnetic field generated by arbitrary sources into any prescribed desired field within a finite
source-free region. Cunill-Subiranas, and A. Sanchez,
Sci Rep 14, 3653 (2024). Pendlebury, and K. Smith, Journal
of Physics D: Applied Physics 20, 1095 (1987). Peterson, and
S. Kry, Radiation 3, 46 (2023). Kry, Radiation 3, 46 (2023). Jackson, Classical Electrodynamics, 3rd ed. Schurig, and D. Smith, Science 312,
1780 (2006).Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Supplementary Information for Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields
S1.1 The system consists of a high-purity aluminum tube with a wall thickness of 2. p. 7 cat
S1 Experimental details
S1. 1 The system
The experimental setup consists of a high-purity aluminum tube (4N) with a wall thickness
of 2. 1 The system
The experimental setup consists of a high-purity aluminum tube (4N) with a wall thickness
of 2. 5 mm, an inner radius of 22. 1 The system
The experimental setup consists of a high-purity aluminum tube (4N) with a wall thickness
of 2. 5 mm, an inner radius of 22. 5 mm, an inner radius of 22. 5 mm, and a length of 100 mm (see Fig. 5 mm, an inner radius of 22. 5 mm, and a length of 100 mm (see Fig. 5 mm, and a length of 100 mm (see Fig. The end caps
are made of cast iron, each with a thickness of 6. 5 mm, and a length of 100 mm (see Fig. The end caps
are made of cast iron, each with a thickness of 6. The end caps
are made of cast iron, each with a thickness of 6. 5 mm, of which 4 mm are inserted inside the
tube and 2. 5 mm, of which 4 mm are inserted inside the
tube and 2. 5 mm extend longitudinally. Throughout the experiment, the aluminum tube is
positioned horizontally inside the dilution-refrigerator cryostat (Bluefors LD250), supported by
press-fitting it into two brass mounts and secured with screws to the mixing stage. The printed circuit board (PCB) used for measurements contains 11 commercial 1D linear
tunneling magnetoresistance (TMR) sensors, Allegro CT100, arranged to map the axial component of the field across different regions of the tube. The board is placed horizontally inside the tube, with its dimensions (90 mm × 45 mm) such
that the tube itself acts as a support, securing it in place to prevent movement. The aluminum
tube has a 1 mm thick slit running the entire length, parallel to the tube axis.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
S1.2.2 Linear fits
The slopes of each linear regression can be obtained from sensor voltages as a function of coil current, and these slopes are directly proportional to the field experienced by each sensor relative to the applied field. All correlation coefficients from the fits range between 0. p. 9 The slopes resulting from these linear regressions are normalized and shown in Table S1. All correlation coefficients from the fits range between 0.Where the paper says it
S1.3 Transition to superconductivity
The voltage recorded by sensor number 11 was measured while driving currents through the superconducting coil over a temperature range from 0.04 K to 1.24 K. Up to 1.00 K, no significant changes are observed in the slopes of the voltage-versus-current curves for sensor 11. p. 9 S4(a) and allow a
correction factor to be applied to the voltages measured at room temperature for comparison
with those obtained at low temperatures. 2 Linear fits
By performing a linear fit of the sensor voltages as a function of the coil current (which is
proportional to the applied field), the slopes of each linear regression can be obtained. Thus, the inner field’s magnitude depends on the external source, but the shape of
the field does not. Changing the source (position, nature, magnitude) will change only the magnitude of the
magnetic field inside V0.Where the paper says it
Where the paper says it
S2 Numerical methods
Numerical simulations were performed using COMSOL Multiphysics 6.2 with the Magnetic Fields (mf) interface to solve Ampère’s law and related equations. p. 5 These normalized axial magnetic
field measurements are presented in Fig. For comparison, four corresponding numerical simulations were performed using the finite element method
to solve Ampère’s law. The induced magnetic fields from the same
flat circular coil are compared under four configurations: (a), (e), and (i) coil and PCB with sensors only; (b), (f), and (j)
with added soft ferromagnetic caps; (c), (g), and (k) with the superconducting aluminum tube added but without the caps;
and (d), (h), and (l) with the full assembly-tube and caps. Color scales represent the axial magnetic field component, Bz,
normalized to the respective maximum values in simulation and experiment, B
sim
z,max and B
exp
z,max. These normalized axial magnetic
field measurements are presented in Fig. For comparison, four corresponding numerical simulations were performed using the finite element method
to solve Ampère’s law. These normalized axial magnetic
field measurements are presented in Fig. For comparison, four corresponding numerical simulations were performed using the finite element method
to solve Ampère’s law. The induced magnetic fields from the same
flat circular coil are compared under four configurations: (a), (e), and (i) coil and PCB with sensors only; (b), (f), and (j)
with added soft ferromagnetic caps; (c), (g), and (k) with the superconducting aluminum tube added but without the caps;
and (d), (h), and (l) with the full assembly-tube and caps. Color scales represent the axial magnetic field component, Bz,
normalized to the respective maximum values in simulation and experiment, B
sim
z,max and B
exp
z,max. The induced magnetic fields from the same
flat circular coil are compared under four configurations: (a), (e), and (i) coil and PCB with sensors only; (b), (f), and (j)
with added soft ferromagnetic caps; (c), (g), and (k) with the superconducting aluminum tube added but without the caps;
and (d), (h), and (l) with the full assembly-tube and caps. Color scales represent the axial magnetic field component, Bz,
normalized to the respective maximum values in simulation and experiment, B
sim
z,max and B
exp
z,max. This approach enables novel possibilities in magnetic
shielding, targeted field delivery, advanced imaging technologies, and a broad range of field-control
applications. Precisely generating and controlling magnetic fields in
certain regions of space is pivotal in many different scientific and engineering domains. For comparison, four corresponding numerical simulations were performed using the finite element method
to solve Ampère’s law. Cast-iron caps were modeled as
a nearly ideal IMP (µ/µ0 = 105
) material, and superconducting aluminum as an almost ideal ZMP (µ/µ0 =
10−5
) medium. This indicates that inside the cylindrical region limited
by two IMP materials with internal surfaces at z = 0
and z = L and a ZMP material with interior surface
at x
2 + y
2 = R2
, the magnetic field is exactly uniform,
irrespective of the field source one locates outside the
cylindrical region (and, of course, outside the materials). 2(a,b), we show a calculated case where the field
in the region of interest is perfectly uniform, regardless
of whether the field source is a dipole or a coil.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
S1.5 Discussion on materials and manufacturing
Cast iron was chosen because it combines very low coercivity with high permeability and linear behavior within the applied field range. Other soft ferromagnetic materials like mu-metal or permalloy could also serve as suitable candidates for IMP surfaces. p. 1 This material is also known as a
perfect magnetic conductor [39–41]. Important to note,
soft linear ferromagnetic materials with high permeability (such as mu-metal or cast iron) are excellent practical
approximations to the ideal IMP case [42].Where the paper says it
S1.5 Discussion on materials and manufacturing
Alternative materials and fabrication techniques could be explored for future implementations, such as lost-wax casting or additive manufacturing. The paper confirms the suitability of the chosen materials for practical implementation and suggests focusing on minimizing slit separation. p. 5 Instead,
these non-uniformities are attributed to the presence of
the slit, which is also accounted for in the simulations. This confirms the suitability of the chosen materials for
practical implementation and suggests that further improvements should focus on minimizing the slit separation.Where the paper says it
S1.5 Discussion on materials and manufacturing
The simulation uses relative permeability values of 1 · 105 for IMP media and 1 · 10−5 for ZMP materials. The total calculation domain in cylindrical axisymmetry was a rectangle of 350 mm × 500 mm. p. 4 In the simulations (e)-(h),
black lines indicate magnetic field lines, and white rectangles mark the actual sensor positions. The same rectangles are used
in the experimental plots (i)-(l), uniformly colored according to the Bz value measured by each sensor, and framed by a larger
rectangle of the same color with reduced opacity to enhance visibility. We have designed a magnetostatic omniconverter. For fields containing a singular point, the entire space
can be divided into nonintersecting regions such that a
field line starting in one region does not cross into another.Where the paper says it
Where the paper says it
S1.5 Discussion on materials and manufacturing
The experimental system uses a high-purity aluminum tube with a wall thickness of 2.5 mm, an inner radius of 22.5 mm, and a length of 100 mm. The end caps are made of cast iron, each with a thickness of 6.5 mm. The aluminum tube has a 1 mm thick slit running the entire length, parallel to the tube axis. p. 8 The board is placed horizontally inside the tube, with its dimensions (90 mm × 45 mm) such
that the tube itself acts as a support, securing it in place to prevent movement. The aluminum
tube has a 1 mm thick slit running the entire length, parallel to the tube axis.Where the paper says it
S1.5 Discussion on materials and manufacturing
The TMR sensors operate reliably down to millikelvin temperatures, providing excellent linearity for the measured field values. The magnitude of applied magnetic fields is well within the linear operating range of the sensors. p. 0 It is well known that magnetic materials can alter
field lines by expelling or attracting them, enabling magnetic shielding or field concentration in free space [17–
19]. Transformation optics [20, 21] spurred new methods
to control electromagnetic and magnetostatic fields via
metamaterials [22, 23], enabling perfect lenses or cloaks
[24–29], among other devices [30–36]. Photographs of
the PCB before soldering the commercial Allegro CT100 sensors (left), and the complete experimental
assembly integrated into the cryostat, shown with caps (center) and without caps (right). ports are used to connect the supply voltage cables for all sensors, while the remaining 22 cables
are used to record measurements depending on the sensor being monitored.Where the paper says it
Where the paper says it
S2 Numerical methods
The simulation mesh was defined with a maximum element size of 0.05 mm, a minimum element size of 0.01 mm, a maximum element growth rate of 1.1, and a curvature factor of 0. p. 9 These measured values are shown in Fig. S4(a) and allow a
correction factor to be applied to the voltages measured at room temperature for comparison
with those obtained at low temperatures. This approach enables novel possibilities in magnetic
shielding, targeted field delivery, advanced imaging technologies, and a broad range of field-control
applications. Precisely generating and controlling magnetic fields in
certain regions of space is pivotal in many different scientific and engineering domains.Where the paper says it
Where the paper says it
S2 Numerical methods
The total calculation domain in cylindrical axisymmetry was a rectangle of 350 mm × 500 mm.
S1.3 Transition to superconductivity
The critical temperature of high-purity (4N) aluminum was measured indirectly using TMR sensors to detect differences in the magnetic field when the tube is superconducting or not. The results constrain the superconducting transition of this 4N bulk aluminum to the range 1. p. 4 Experimental system configurations (a)-(d),
corresponding simulation results (e)-(h), and experimental measurements (i)-(l). The induced magnetic fields from the same
flat circular coil are compared under four configurations: (a), (e), and (i) coil and PCB with sensors only; (b), (f), and (j)
with added soft ferromagnetic caps; (c), (g), and (k) with the superconducting aluminum tube added but without the caps;
and (d), (h), and (l) with the full assembly-tube and caps.Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
General recipe for magnetic field generation: The system can generate any desired magnetostatic field in a finite source-free region of space using an arbitrary source located outside this region by reshaping the field lines of the sources with adequate magnetic materials surrounding the region of interest.
-
Field shape transformation capability: The improved AI system can transform any applied field into any other desired field distribution, such as uniform, monopole-like, dipole-like, or parabolic-like fields within a bounded source-free volume.
-
Exact dipolar field generation: The system can generate an exact dipolar field in a given region irrespective of the source fields by utilizing the mathematical construction where
the field shape inside the region V0 is independent of the field sources outside that region.
-
Monopolar field generation: The system can generate an exact monopolar field in a large region of space from any external source, as demonstrated by the formula for H(r) and phi(r) in spherical coordinates.
-
Geometry-specific field generation: The system can generate a given field geometry by selecting a ZMP surface with the desired geometry and finding conjugate IMP surfaces to enclose a volume V0 where the field will have exactly the desired shape.
-
Material implementation for omniconversion: The system can utilize practical materials like infinite-magnetic-permeability (IMP) media, approximated by soft linear ferromagnetic materials, for equipotential surfaces and zero-magnetic-permeability (ZMP) materials, approximated by superconducting metals, for lateral surfaces.
Abstract
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability to freely tailor their spatial distribution. We introduce a general framework to passively convert the magnetic field generated by arbitrary sources into any prescribed desired field within a finite source-free region. Our method relies on field shaping using linear magnetic materials, enabling source-independent magnetic-field molding. We provide the general recipe, analytical and numerical demonstrations for some paradigmatic examples, and a proof-of-concept experiment that validates the idea and materials implementation. This approach enables novel possibilities in magnetic shielding, targeted field delivery, advanced imaging technologies, and a broad range of field-control applications.
Related papers
- Twistsonics: engineering acoustic topological textures in moire sound lattices
- Vibe-FDTR: An agent-oriented framework for reproducible frequency-domain thermoreflectance data analysis
- Principles of Use of Tensile J-Curve Materials in Antagonistic Arrangements
- Nonreciprocal Radiation in Time-Periodic Topological Quadrupole Lattices
- Impact of Structural Design on Magneto-Mechanical Resonators: The Case of a Jewel Bearing Variant
- Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel