Conformal Point and the Calibrated Conic

arXiv:2601.11679 · cs.CV · Submitted 2026-01-16 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: AI Radio. Generated commentary on the latest Artificial Intelligence papers.

Tom: We're looking at the paper: "Conformal Point and the Calibrated Conic".

Title and authors: Tom: So we've talked about the paper's title and authors—"Conformal Point and the Calibrated Conic"—and how it sets out to give us these visual tools for geometry. Now let's get into what the paper actually proposes.

Jane: The summary explains that they are introducing two geometric objects, the calibrating conic and the conformal point, which work together to give a visual indication of the camera's calibration.

Lu: They argue that these concepts allow you to measure angles between rays in an image, determine the field of view of a camera, see its orientation relative to features like vanishing lines in a plane, and they give you a simple way to do self-odometry when moving on a flat surface.

Meng: The paper presents the calibrating conic as an alternative to what they call the image of the absolute conic, which is purely imaginary and doesn't have any real points you can actually see in an image.

Lalam: They represent this calibrating conic with a matrix C equals K transpose one one minus one K inverse, where K is your intrinsic matrix. That specific representation is what makes it a real conic that can be seen in the image, unlike that purely imaginary absolute conic idea.

Tom: So, the core of what they're saying is moving from an algebraic concept to something you can actually lay right on top of an image to understand how a camera sees the world.

The paper's summary: Jane: Moving past that, the paper dives into how these objects are used for actual measurement. They suggest that you can compute the angle between two rays using a geometric construction involving this calibrating conic.

Lu: Specifically, theorem two point two states that you can compute the angle between two rays through a geometric construction using this object. It involves drawing a line through two points and finding where it intersects their reflected polars, which gives you a formula for the cosine of the square of the angle theta.

Tom: That sounds like they're showing us how to find that cosine value geometrically, without relying solely on those abstract matrix calculations we usually have to do.

Meng: They also suggest another way to measure the angle directly by constructing this specific point, which they call the conformal point, and then measuring the angle formed by that point and two other points.

Lalam: The definition of that conformal point is tied to a vanishing line in an image of a world plane, or it can be defined with respect to any two points A and B in an image.

Jane: And the key thing about the conformal point construction is that if you measure the angle ACB, that angle is actually equal to the true angle in the world plane between those two lines.

Tom: So, we're not just getting a number; we're getting a direct measurement of how things are oriented in real space from just looking at the image.

The paper's improvements: Tom: Now for the improvements section, this paper suggests using these geometric constructs to calibrate an apparent camera associated with a painting, which is interesting because it applies calibration to art too.

Lu: For outdoor scenes, like road intersections where you have right-angle conditions, the calibrating conic can be used to calibrate the camera. In odometry scenarios, the conformal point and horizon line stay fixed during planar motion.

Meng: This setup allows for computing pairwise rotations between images because you can compute the rotation of the platform by looking at that angle between two rays AB and A prime B prime in the world plane.

Jane: They also discuss using these methods for tiling floors, where vanishing points or diagonals can help calibrate the camera. The calibrating conic can even estimate how tilted the camera is with respect to a plane, like the ground plane.

Lalam: In art calibration specifically, identifying that calibrating conic lets you view a painting from an ideal viewpoint. And they can even estimate things like horizontal and diagonal angles of the field of view using it.

Tom: The mathematical interpretation part is also important because they identify this conformal point as the only point where the image-to-plane mapping is a conformal mapping in a standard sense, meaning angles are preserved when you move between them.

Conclusion: Jane: So wrapping up, the paper shows that these geometric objects give us an immediate cue for things like camera tilt or field of view, which feels really useful for someone working with images today.

Tom: The real advantage they highlight is performing these computations without needing heavy algebra or optimization methods. You can draw the calibrating conic right on top of the image and immediately understand its geometry.

Lu: They emphasize that this direct geometric interpretation is relevant in an era of deep learning, especially when you want to visualize the underlying geometry of what a model is seeing.

Meng: For deployment, they show how you can compute pairwise rotations efficiently using something called two point ransac, and the support for that estimated rotation is determined by the number of points whose motion stays consistent with that rotation.

Lalam: And they finish by showing how you can compute things like orthogonal directions as vanishing points of lines on a plane, which lets you draw perspectively correct grids, estimating a field of view half angle of about twenty four point two degrees vertically and twenty two point five degrees horizontally.

Tom: It seems like these concepts offer a way to visualize image geometry that leads to very intuitive ways to compute angles and directions in an image.

Jane: We're looking at the paper "Conformal Point and the Calibrated Conic" today, which really shows how simple geometric constructs can help us understand complex camera calibration problems visually.

Richard Hartley

Australian National University

cs.CV

Submitted: 2026-01-16

Updated: 2026-11-16

Comments: Fixed some small errors

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 79/100

The gist: This paper describes two geometric objects, the calibrating conic and the conformal point that may be overlaid on an image to aid intuitive understanding of image geometry.

Key concepts

Calibrating Conic
This is a real conic section that represents the camera's calibration within an image. It provides a visual representation of the camera's internal geometry, helping users intuitively understand its orientation and field of view relative to scene features.
Conformal Point
The conformal point is a specific location constructed based on two lines in the world plane (like two points A and B). Its angle measurement relative to another line equals the true angle between those lines in the real world, making it a powerful tool for measuring angles.
Geometric Angle Computation
Angles between image rays can be calculated using geometric constructions involving the calibrating conic. This method avoids heavy algebra and provides a direct way to find trigonometric values like cos^2(theta) by intersecting lines with their reflected polars.
Self-Odometry for Mobile Robots
By fixing the horizon and conformal point during motion, pairwise rotations between images can be computed efficiently. The rotation of the camera platform is determined by the angle between corresponding rays in different images, enabling quick motion tracking.

Terminology

Summary

This paper describes two geometric objects, the calibrating conic and the conformal point that may be overlaid on an image to aid intuitive understanding of image geometry. p. 0

Where the paper says it

These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. 1 Introduction This paper describes two geometric objects, the calibrating conic and the conformal point that may be overlaid on an image to aid intuitive understanding of the geometry.

These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. p. 0
Where the paper says it

Conformal point and the calibrating conic Richard Hartley Australian National University Abstract This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

p. 0
Where the paper says it

Conformal point and the calibrating conic Richard Hartley Australian National University Abstract This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

p. 0
Where the paper says it

Conformal point and the calibrating conic Richard Hartley Australian National University Abstract This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

p. 0
Where the paper says it

Conformal point and the calibrating conic Richard Hartley Australian National University Abstract This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

p. 0
Where the paper says it

Conformal point and the calibrating conic Richard Hartley Australian National University Abstract This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

Geometric Constructs for Camera Calibration

The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane. It also gives a conceptually simple way, involving only geometric constructs without algebra, of performing self-odometry under planar motion. p. 0

Where the paper says it

The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane. It also gives a conceptually simple way, involving only geometric constructs without algebra, of performing self-odometry under planar motion.

The calibrating conic is introduced as an alternative to the image of the absolute conic (IAC) to express the calibration of a camera. p. 1
Where the paper says it

Since the conformal point paper is not easily accessible online, at least not through my library, it seemed opportune to describe its properties and its connection to the calibrating conic. 2 Basics The calibrating conic was introduced in the Hartley-Zisserman book [HZ03] as an alternative to the image of the absolute conic (IAC) to express the calibration of a camera.

It is a real conic that can be seen in the image, unlike the purely imaginary IAC. p. 2
Where the paper says it

Invisibility. Although the IAC may be conceived as a conic, represented by a 3 × 3 symmetric matrix, it is a purely imaginary conic, that contains no real points.

The calibrating conic is represented by the matrix C = K−⊤ [ 1 1 −1] K−1 (3). p. 1
Where the paper says it

2 Basics The calibrating conic was introduced in the Hartley-Zisserman book [HZ03] as an alternative to the image of the absolute conic (IAC) to express the calibration of a camera. The IAC is a conic lying in the image plane represented by the symmetric matrix ω = (KK⊤) −1 , where K is the calibration matrix of the camera, a 3 × 3 upper triangular matrix.

p. 1
Where the paper says it

2 Basics The calibrating conic was introduced in the Hartley-Zisserman book [HZ03] as an alternative to the image of the absolute conic (IAC) to express the calibration of a camera. The IAC is a conic lying in the image plane represented by the symmetric matrix ω = (KK⊤) −1 , where K is the calibration matrix of the camera, a 3 × 3 upper triangular matrix.

Measuring Angles with Geometric Methods

The angle between two rays may be computed via a geometric construction using the calibrating conic. Theorem 2.2 states that the angle between two rays can be computed via a geometric construction using the calibrating conic. p. 4

Where the paper says it

However, it is an algebraic formula only and cannot be easily interpreted intuitively or geometrically. It will be shown next, however, that the angle between two rays may be computed via a geometric construction using the calibrating conic.

This construction involves constructing a line through two points and finding its intersections with their reflected polars, which leads to a formula for cos2(θ). p. 6
Where the paper says it

In the present section a purely geometric method is given for constructing the angle between two rays. This method involves a point called the “conformal point”, which is defined with respect to the vanishing line in the image of a world plane (the horizon line), or with respect to a line joining two points A and B in an image.

The angle between rays can also be measured directly by constructing the point C, which is the conformal point, and measuring the angle ACB. p. 8
Where the paper says it

Figure 9: The angle AC\′B is related to an angle ACB \measured directly in the image. The point C is constructed by rotating the triangle AC′B about the line AB until the camera centre C ′ is rotated onto the image plane, resulting in the point \ C.

The Conformal Point Definition

The conformal point is defined with respect to the vanishing line in the image of a world plane (the horizon line), or with respect to a line joining two points A and B in an image. The angle ACB is equal to the true angle in the world plane between the lines. p. 6

Where the paper says it

Then connect these two points back to the conformal point C, which is a point to be described presently. The angle ACB \is equal to the true angle in the world plane between the lines.

The position of the conformal point constructed in this way lies along the perpendicular to the line AB passing through the principal point P. p. 8
Where the paper says it

This point is referred to as the conformal point corresponding to the line AB. The position of the conformal point constructed in this way lies along the perpendicular to the line AB passing through the principal point P.

Applications in Scene Analysis and Odometry

The techniques described can be used to calibrate the apparent camera associated with a painting. For outdoor scenes, such as road intersections, the calibrating conic can be used to calibrate the camera given right-angle conditions. p. 9

Where the paper says it

Figure 10: The conformal point in an image relative to a plane is the point on a perpendicular to the horizon (vanishing line of the plane) at a distance p f 2 + d 2 from the horizon; d is the distance of the horizon from the principal point, and f is the focal length. The image on the right shows a geometric construction that computes the conformal point given the calibrating conic (red) and the horizon line (light blue).

In odometry, the conformal point and horizon line remain fixed during planar motion, allowing for the computation of pairwise rotations between images. p. 0
Where the paper says it

The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane. It also gives a conceptually simple way, involving only geometric constructs without algebra, of performing self-odometry under planar motion.

The rotation of the platform can be computed using the angle ∠(AB, A′B′) between rays AB and A′B′. p. 4
Where the paper says it

However, it is an algebraic formula only and cannot be easily interpreted intuitively or geometrically. It will be shown next, however, that the angle between two rays may be computed via a geometric construction using the calibrating conic.

Calibration for Specific Scenarios

For images with tiled floors, vanishing points or diagonals can be used to calibrate the camera. The calibrating conic can also be used to estimate the tilt of the camera with respect to a plane, such as the ground plane. p. 0

Where the paper says it

Neither can one display the calibration matrix in a document and expect the reader to fully grasp its connection with a given image. It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct.

In art calibration, identifying the calibrating conic allows viewing a painting from an ideal viewpoint. p. 1
Where the paper says it

1 It is useful as a theoretical tool for investigating the camera calibration, and to deduce properties of the scene. Notable among the properties of the IAC is that it allows the computation of the angle between two rays represented by points in the image.

The field of view can be estimated using the calibrating conic, for instance, yielding horizontal and diagonal angles. p. 0
Where the paper says it

Neither can one display the calibration matrix in a document and expect the reader to fully grasp its connection with a given image. It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct.

The method is also applicable to estimating the upward tilt of a view with respect to the horizon. p. 0
Where the paper says it

Neither can one display the calibration matrix in a document and expect the reader to fully grasp its connection with a given image. It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct.

Mathematical Interpretation

The conformal point is identified as the only point at which the image-to-plane mapping is a conformal mapping in the standard sense, where angles are preserved. This occurs when the pull-back metric on the image plane equals a scalar multiple of the original Euclidean metric. p. 6

Where the paper says it

To compute the true world angle, in the image extend the two lines to points A and B on the vanishing line of the plane, known as the horizon. Then connect these two points back to the conformal point C, which is a point to be described presently.

The condition for conformality is equivalent to J−T x Jx = λ(x)I. p. 3
Where the paper says it

This line may be termed the reflected polar of x (with respect to the calibrating conic). Thus, the condition x ′⊤ωx = 0 means that the point x ′ lies on the reflected polar Cx˙ , or by symmetry that x lies on the reflected polar Cx˙ ′ .

This point lies on the perpendicular from the principal point to the horizon at a specific distance. p. 8
Where the paper says it

The position of the conformal point constructed in this way lies along the perpendicular to the line AB passing through the principal point P. Its distance from O is equal to the distance |OC′ |.

The construction of the calibrating conic can also be done using this conformal point method, which is generalized for any known angle θ. p. 4
Where the paper says it

However, it is an algebraic formula only and cannot be easily interpreted intuitively or geometrically. It will be shown next, however, that the angle between two rays may be computed via a geometric construction using the calibrating conic.

The estimate of focal length f can be derived from the geometry involving the conformal point and other image features. p. 9
Where the paper says it

Figure 10: The conformal point in an image relative to a plane is the point on a perpendicular to the horizon (vanishing line of the plane) at a distance p f 2 + d 2 from the horizon; d is the distance of the horizon from the principal point, and f is the focal length. The image on the right shows a geometric construction that computes the conformal point given the calibrating conic (red) and the horizon line (light blue).

The results from different methods for estimating f are shown to be equal. p. 8
Where the paper says it

Point C ′ is the camera centre; P is the principal point, namely the foot of the perpendicular from C ′ to the image plane. The task is to determine the angle between the rays corresponding to pixels A and B, that is the angle AC\′B, which was shown in fig 7 to equal the angle (in the world) between to lines vanishing at points A′ and B′ .

Conclusion on Practical Use

The paper demonstrates that these geometric objects provide a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane. This direct geometric interpretation is relevant in an era of deep learning. p. 0

Where the paper says it

It will be demonstrated that these geometric objects are often easily visible and derivable from an image, without algebra or optimization. This direct geometric interpretation of the image geometry is relevant in an era of deep learning.

The ability to perform these computations without algebra or optimization is highlighted as a key advantage. p. 0
Where the paper says it

It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct. It will be demonstrated that these geometric objects are often easily visible and derivable from an image, without algebra or optimization.

The construction of the calibrating conic can be drawn directly on top of the image itself, allowing an enhanced understanding of the geometry of the scene. p. 2
Where the paper says it

This is in contrast to the IAC or even the calibration matrix itself which give a more abstract representation of the calibration. If the calibrating conic is known, then it may be drawn directly on top of the image itself, allowing an enhanced understanding of the geometry of the scene.

The field of view can be readily apparent when overlaid with these constructs. p. 0
Where the paper says it

The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane. It also gives a conceptually simple way, involving only geometric constructs without algebra, of performing self-odometry under planar motion.

The calibrating conic can also be used to identify the ideal position from which to view a painting. p. 1
Where the paper says it

The IAC may also be used to determine the angle between two lines lying on a plane in space. For this, it is also necessary to identify the vanishing line of the plane (in the image).

This method helps viewers perceive the painting with accurate perspective as if they were immersed in the scene. p. 6
Where the paper says it

The angle θ is not easily visualized, given the two points x1, x2 and the calibrating conic C. In the present section a purely geometric method is given for constructing the angle between two rays.

The paper concludes by showing how point matches can be used to compute pairwise rotations between images. p. 2
Where the paper says it

5) of [HZ03] gives further details of the use of the IAC in camera calibration, and shows how certain restrictions on the calibration matrix (such as zeroskew, known principal point) can be used to facilitate calibration. A popular calibration technique of Zhang ([Zha00] essentially leverages the invariance property of the IAC under homographies of images of a planar calibration object captured by a rotating and translating camera.

The rotation of the platform can be computed using any of various robust techniques, such as the median of a set of rotations computed from two-point matches. p. 4
Where the paper says it

However, it is an algebraic formula only and cannot be easily interpreted intuitively or geometrically. It will be shown next, however, that the angle between two rays may be computed via a geometric construction using the calibrating conic.

This method is quick and efficient for computing motion. p. 0
Where the paper says it

The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane. It also gives a conceptually simple way, involving only geometric constructs without algebra, of performing self-odometry under planar motion.

The computation of the horizon and conformal point can be done once, as they remain fixed during the motion. p. 0
Where the paper says it

Neither can one display the calibration matrix in a document and expect the reader to fully grasp its connection with a given image. It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct.

p. 0
Where the paper says it

Neither can one display the calibration matrix in a document and expect the reader to fully grasp its connection with a given image. It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct.

The angle or rotation of the camera platform is equal to the angle ∠(AB, A′B′) (in the world) between the rays AB and A′B′. p. 8
Where the paper says it

Point C ′ is the camera centre; P is the principal point, namely the foot of the perpendicular from C ′ to the image plane. The task is to determine the angle between the rays corresponding to pixels A and B, that is the angle AC\′B, which was shown in fig 7 to equal the angle (in the world) between to lines vanishing at points A′ and B′ .

p. 8
Where the paper says it

Point C ′ is the camera centre; P is the principal point, namely the foot of the perpendicular from C ′ to the image plane. The task is to determine the angle between the rays corresponding to pixels A and B, that is the angle AC\′B, which was shown in fig 7 to equal the angle (in the world) between to lines vanishing at points A′ and B′ .

This angle is readily computed using the conformal point and the known horizon line. p. 6
Where the paper says it

To compute the true world angle, in the image extend the two lines to points A and B on the vanishing line of the plane, known as the horizon. Then connect these two points back to the conformal point C, which is a point to be described presently.

The method of computing pairwise rotations can be done efficiently using two-point Ransac. p. 6
Where the paper says it

In the present section a purely geometric method is given for constructing the angle between two rays. This method involves a point called the “conformal point”, which is defined with respect to the vanishing line in the image of a world plane (the horizon line), or with respect to a line joining two points A and B in an image.

p. 6
Where the paper says it

In the present section a purely geometric method is given for constructing the angle between two rays. This method involves a point called the “conformal point”, which is defined with respect to the vanishing line in the image of a world plane (the horizon line), or with respect to a line joining two points A and B in an image.

The support for the estimated rotation is equal to the number of points (denoted D) whose motion is consistent with a rotation θ. p. 2
Where the paper says it

Invariance. A basic property of the IAC is that it is invariant both to translation and rotation of the camera.

p. 2
Where the paper says it

Invariance. A basic property of the IAC is that it is invariant both to translation and rotation of the camera.

This makes computing motion quick and efficient. p. 0
Where the paper says it

The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane. It also gives a conceptually simple way, involving only geometric constructs without algebra, of performing self-odometry under planar motion.

The computation of orthogonal directions as vanishing points of orthogonal lines on a plane is straightforward. p. 1
Where the paper says it

In particular, for orthogonal vanishing points (for instance the vertical and horizontal vanishing points, (2) holds. Lines on a plane.

p. 1
Where the paper says it

In particular, for orthogonal vanishing points (for instance the vertical and horizontal vanishing points, (2) holds. Lines on a plane.

Diagonals also give the 45◦ vanishing direction. p. 0
Where the paper says it

Between them, they give a visual indication of the calibration of the camera, much more intuitive than the usual way of describing the camera calibration in terms of an upper-triangular 3 × 3 matrix, the calibration matrix, and yet containing the same information in a geometric way. The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane.

p. 0
Where the paper says it

Between them, they give a visual indication of the calibration of the camera, much more intuitive than the usual way of describing the camera calibration in terms of an upper-triangular 3 × 3 matrix, the calibration matrix, and yet containing the same information in a geometric way. The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane.

The knowledge of these three vanishing points allows one to draw perspectively correct grids. p. 6
Where the paper says it

Figure 5: Finding the calibrating conic given three orthogonal vanishing points. This diagram is taken directly from [HZ03].

p. 6
Where the paper says it

Figure 5: Finding the calibrating conic given three orthogonal vanishing points. This diagram is taken directly from [HZ03].

The field of view may be measured as a half angle of 24. p. 0
Where the paper says it

Between them, they give a visual indication of the calibration of the camera, much more intuitive than the usual way of describing the camera calibration in terms of an upper-triangular 3 × 3 matrix, the calibration matrix, and yet containing the same information in a geometric way. The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane.

p. 0
Where the paper says it

Between them, they give a visual indication of the calibration of the camera, much more intuitive than the usual way of describing the camera calibration in terms of an upper-triangular 3 × 3 matrix, the calibration matrix, and yet containing the same information in a geometric way. The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane.

2◦ vertically and 22.5◦ horizontally. The angle of upward tilt is about 6. p. 0
Where the paper says it

Neither can one display the calibration matrix in a document and expect the reader to fully grasp its connection with a given image. It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct.

p. 0
Where the paper says it

Neither can one display the calibration matrix in a document and expect the reader to fully grasp its connection with a given image. It is the purpose of this note to show how the calibrating conic, and its partner, the conformal point with respect to lines in the image, for instance the horizon, give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane, and is able to make easy computation of angles via a simple geometric construct.

7◦, as estimated by the method described in fig 18. p. 6
Where the paper says it

The angle θ is not easily visualized, given the two points x1, x2 and the calibrating conic C. In the present section a purely geometric method is given for constructing the angle between two rays.

p. 6
Where the paper says it

The angle θ is not easily visualized, given the two points x1, x2 and the calibrating conic C. In the present section a purely geometric method is given for constructing the angle between two rays.

The view direction is at an angle of about 5. p. 1
Where the paper says it

The point of intersection of the two lines with the horizon gives the points in the image corresponding to the vanishing direction of the two lines. The angle between these two lines is equal to the angle between their vanishing directions.

p. 1
Where the paper says it

The point of intersection of the two lines with the horizon gives the points in the image corresponding to the vanishing direction of the two lines. The angle between these two lines is equal to the angle between their vanishing directions.

4◦ towards the right with respect to the orientation of the room. p. 0
Where the paper says it

Between them, they give a visual indication of the calibration of the camera, much more intuitive than the usual way of describing the camera calibration in terms of an upper-triangular 3 × 3 matrix, the calibration matrix, and yet containing the same information in a geometric way. The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane.

p. 0
Where the paper says it

Between them, they give a visual indication of the calibration of the camera, much more intuitive than the usual way of describing the camera calibration in terms of an upper-triangular 3 × 3 matrix, the calibration matrix, and yet containing the same information in a geometric way. The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane.

All these lines converge at points on the horizon. p. 1
Where the paper says it

In such a case, the vanishing point of the two lines lying on the plane is obtained by extending the lines to the horizon. The point of intersection of the two lines with the horizon gives the points in the image corresponding to the vanishing direction of the two lines.

p. 1
Where the paper says it

In such a case, the vanishing point of the two lines lying on the plane is obtained by extending the lines to the horizon. The point of intersection of the two lines with the horizon gives the points in the image corresponding to the vanishing direction of the two lines.

A rough measure suggests an accuracy of around 2% or 3% error in these estimates. The paper presents methods for visualizing image geometry through the calibrating conic and conformal point. p. 0
Where the paper says it

These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. 1 Introduction This paper describes two geometric objects, the calibrating conic and the conformal point that may be overlaid on an image to aid intuitive understanding of the geometry.

p. 0
Where the paper says it

These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. 1 Introduction This paper describes two geometric objects, the calibrating conic and the conformal point that may be overlaid on an image to aid intuitive understanding of the geometry.

The concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. p. 0
Where the paper says it

Conformal point and the calibrating conic Richard Hartley Australian National University Abstract This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. The paper is a demonstration of the properties of these geometric objects. p. 0
Where the paper says it

If one accepts a hypothesis that neural networks are better at performing tasks that the human visual system can easily do, rather than accurately compute matrices, homographies, absolute conics, trifocal tensors or the mathematical paraphernalia of multiview geometry, then it makes sense to look at visual and intuitive ways of presenting the same sort of data. It is beyond the scope of this note to demonstrate the use of concepts such as these in a learning context; the paper confines itself to an demonstration of their properties.

p. 0
Where the paper says it

If one accepts a hypothesis that neural networks are better at performing tasks that the human visual system can easily do, rather than accurately compute matrices, homographies, absolute conics, trifocal tensors or the mathematical paraphernalia of multiview geometry, then it makes sense to look at visual and intuitive ways of presenting the same sort of data. It is beyond the scope of this note to demonstrate the use of concepts such as these in a learning context; the paper confines itself to an demonstration of their properties.

p. 0
Where the paper says it

If one accepts a hypothesis that neural networks are better at performing tasks that the human visual system can easily do, rather than accurately compute matrices, homographies, absolute conics, trifocal tensors or the mathematical paraphernalia of multiview geometry, then it makes sense to look at visual and intuitive ways of presenting the same sort of data. It is beyond the scope of this note to demonstrate the use of concepts such as these in a learning context; the paper confines itself to an demonstration of their properties.

The paper is a demonstration of the properties of these geometric objects.

References

[CKZ05] Antonio Criminisi, Martin Kemp, and Andrew Zisserman. Bringing pictorial space to life: Computer techniques for the analysis of paintings. p. 1

Where the paper says it

These considerations correspond most particularly to vanishing points in the image. These are the points in the image corresponding to particular directions in space, such as the vertical direction, or either of two horizontal direction.

In Anna Bentkowska-Kafel, Trish Cashen, and Hazel Gardner, editors, Digital art history: A subject in transition, pages 77–100. Intellect Books, Bristol, UK, 2005.

[Cri01] Antonio Criminisi. Accurate visual metrology from single and multiple uncalibrated images. p. 2

Where the paper says it

5) of [HZ03] gives further details of the use of the IAC in camera calibration, and shows how certain restrictions on the calibration matrix (such as zeroskew, known principal point) can be used to facilitate calibration. A popular calibration technique of Zhang ([Zha00] essentially leverages the invariance property of the IAC under homographies of images of a planar calibration object captured by a rotating and translating camera.

ACM Distinguished Dissertation Series. Springer-Verlag, London, 2001. p. 7
Where the paper says it

The conformal point was introduced in the paper [HSA03] presented at the IRSS conference (International Symposium on Robotics Research), in Lorne Australia in 2001. However, the complete paper does not seem to be available easily on line For this reason, its main results and derivations are repeated here.

[HSA03] Richard Hartley and Chanop Silpa-Anan. p. 0

Where the paper says it

Conformal point and the calibrating conic Richard Hartley Australian National University Abstract This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

Visual navigation in a plane using the conformal point. p. 1
Where the paper says it

The first is the calibrating conic, which although mentioned in the Hartley-Zisserman book has not been taken up by the wider community. The second concept is that of the conformal point, which was introduced in a paper from 2003: “Visual Navigation in the Plane using the Conformal Point,” [HSA03] which has received 7 citations in the succeeding 22 years, a respectable tally by most expectations.

In Raymond Austin Jarvis and Alexander Zelinsky, editors, Robotics Research, pages 385–398, Berlin, Heidelberg, 2003. p. 7
Where the paper says it

The conformal point was introduced in the paper [HSA03] presented at the IRSS conference (International Symposium on Robotics Research), in Lorne Australia in 2001. However, the complete paper does not seem to be available easily on line For this reason, its main results and derivations are repeated here.

[HZ03] Richard Hartley and Andrew Zisserman. p. 1

Where the paper says it

Since the conformal point paper is not easily accessible online, at least not through my library, it seemed opportune to describe its properties and its connection to the calibrating conic. 2 Basics The calibrating conic was introduced in the Hartley-Zisserman book [HZ03] as an alternative to the image of the absolute conic (IAC) to express the calibration of a camera.

Multiple view geometry in computer vision. p. 0
Where the paper says it

Between them, they give a visual indication of the calibration of the camera, much more intuitive than the usual way of describing the camera calibration in terms of an upper-triangular 3 × 3 matrix, the calibration matrix, and yet containing the same information in a geometric way. The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane.

Cambridge University Press, Cambridge, UK, second edition, 2003. p. 1
Where the paper says it

The first is the calibrating conic, which although mentioned in the Hartley-Zisserman book has not been taken up by the wider community. The second concept is that of the conformal point, which was introduced in a paper from 2003: “Visual Navigation in the Plane using the Conformal Point,” [HSA03] which has received 7 citations in the succeeding 22 years, a respectable tally by most expectations.

[Sto24] David G. Stork. Pixels & paintings: Foundations of computer-assisted connoisseurship. p. 2

Where the paper says it

For a camera with calibration matrix K, the calibrating conic is represented by the matrix C = K −⊤   1 1 −1   K −1 (3) It is shown in [HZ03], figure 8. 27, reproduced here as fig 1 how the entries of the calibration matrix Figure 1: For images with square pixels, the calibrating conic is a circle with centre at the principal point of the image.

Wiley, Hoboken, NJ, 2024.

Pruning redundant reasoning tokens

The paper describes two geometric objects, the calibrating conic and the conformal point that may be overlaid on an image to aid intuitive understanding of image geometry. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

How the training signal is built

The calibrating conic gives the calibration of the camera, and along with the conformal point it gives an easy visual way of measuring angles between rays in the image, the field of view of the camera, its orientation with respect to major geometric features in the image, or between vanishing lines in the plane. The calibrating conic is represented by the matrix C = K−⊤ [ 1 1 −1] K−1 (3).

Where the gains come from

The calibrating conic can be read directly and visually from the calibrating conic. This is in contrast to the IAC or even the calibration matrix itself which give a more abstract representation of the calibration. p. 2

Where the paper says it

Thus, the calibrating conic gives a direct geometric visual represention of the camera calibration. This is in contrast to the IAC or even the calibration matrix itself which give a more abstract representation of the calibration.

The conformal point lies on a perpendicular to the line AB passing through the principal point P. p. 8
Where the paper says it

This point is referred to as the conformal point corresponding to the line AB. The position of the conformal point constructed in this way lies along the perpendicular to the line AB passing through the principal point P.

This construction works for any two lines in the world plane. p. 6
Where the paper says it

The angle ACB \is equal to the true angle in the world plane between the lines. This construction works for any two lines in the world plane.

The angle between rays can be computed via a geometric construction using the calibrating conic. p. 4
Where the paper says it

However, it is an algebraic formula only and cannot be easily interpreted intuitively or geometrically. It will be shown next, however, that the angle between two rays may be computed via a geometric construction using the calibrating conic.

The method of computing pairwise rotations can be done efficiently using two-point Ransac. The computation of the horizon and conformal point can be done once, as they remain fixed during the motion. The angle or rotation of the camera platform is equal to the angle ∠(AB, A′B′) (in the world) between the rays AB and A′B′. The support for the estimated rotation is equal to the number of points (denoted D) whose motion is consistent with a rotation θ. The computation of orthogonal directions as vanishing points of orthogonal lines on a plane is straightforward. Diagonals also give the 45◦ vanishing direction. The knowledge of these three vanishing points allows one to draw perspectively correct grids. The field of view may be measured as a half angle of 24.2◦ vertically and 22.5◦ horizontally. The angle of upward tilt is about 6.7◦, as estimated by the method described in fig 18. The view direction is at an angle of about 5.4◦ towards the right with respect to the orientation of the room. All these lines converge at points on the horizon. A rough measure suggests an accuracy of around 2% or 3% error in these estimates. The paper presents methods for visualizing image geometry through the calibrating conic and conformal point. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image. The paper is a demonstration of the properties of these geometric objects.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Geometric Intuition for Calibration Assessment: The system can visually overlay a calibrating conic and its partner, the conformal point, onto an image to provide an intuitive way of measuring angles between rays in the image and give a direct cue from which one immediately understands such basics as the field of view of the camera or its tilt with respect to a plane.

  2. Geometric Angle Computation: The system can compute angles between two rays using a geometric construction involving the calibrating conic, rather than relying solely on algebraic formulas, as demonstrated by Theorem 2.2 which provides a way to compute cos theta using cross-ratios of reflected polars.

  3. Self-Odometry for Mobile Robots: For mobile robots, the system can compute self-rotation by first computing the horizon and conformal point once and then using pairwise rotations for a pair of images based on the angle between rays AB and A'B' computed using the conformal point and horizon line.

  4. Field of View Estimation: The system can estimate the field of view by observing that the field of view is equal to the angle subtended by two points at the edges of the image using direct construction, which can yield measurements like 120 degrees horizontal and 130 degrees diagonal.

  5. Camera Tilt Estimation: The system can estimate camera tilt with respect to a plane, such as the ground plane, by calculating the angle between the principal ray of the camera and the horizon, which is equal to the angle between the rays corresponding to the principal point P, and the foot of the perpendicular to the horizon.

  6. Art Perspective Correction: The system can identify ideal viewpoints for viewing paintings by finding a position where the calibrating conic subtends a half-angle of 45 degrees, allowing viewers to perceive the painting with accurate perspective as if they were immersed in the scene.

Abstract

This gives some information about the conformal point and the calibrating conic, and their relationship one to the other. These concepts are useful for visualizing image geometry, and lead to intuitive ways to compute geometry, such as angles and directions in an image.

Related papers