Framing Anomaly in Lattice Chern-Simons-Maxwell Theory

arXiv:2601.04318 · hep-th, cond-mat.str-el, hep-lat · Submitted 2026-01-07 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Theory. The day in high-energy theory: gravity, strings, fields and the questions left open.

Kai: We're looking at the paper: "Framing Anomaly in Lattice Chern-Simons-Maxwell Theory".

Mira: Here's the gist of the paper. Framing anomaly is a key property of (2 + 1)d chiral topological orders, for it reveals that the chirality is an intrinsic bulk property of the system, rather than a property of the boundary between two systems The authors show its framing anomaly in the absence of boundary by computing the expectation of a lattice version of the modular T operator in the ground subspace on a spatial torus, from which they extract that ⟨T⟩ has a universal phase of −2π/12 as expected This pins down the last and most crucial property required for a valid lattice definition of U(1) Chern-Simons theory.

Kai: Theoretical Background Chern-Simons theory is a landmark in the formal development of quantum field theory and describes the quantum Hall effect.

Mira: A key characterization of a Chern-Simons theory is its chirality, which manifests as gapless chiral edge mode(s).

Kai: Chirality also manifests as framing anomaly, which says the phase of the partition function has a dependence, in units of 2πc−/24, on the global choice of a basis of tangent vectors (a frame) over the spacetime.

Title and authors: Mira: Let's talk about the title and who wrote this paper, "Framing Anomaly in Lattice Chern-Simons-Maxwell Theory". It’s a very specific focus on finding that anomaly in a lattice setting.

Kai: I think the importance is that they are showing how the chirality, which is usually seen at the edge of a system, is actually an intrinsic bulk property when you look at these lattice models.

Lev: From my side, it’s interesting because it moves this from some abstract QFT idea into something that can be put on a computer simulation or maybe even on hardware we're building for error correction.

Mira: It suggests that the physics of the system is encoded in how the bulk structure behaves under these modular transformations, which is a really neat way to probe topological order without needing an explicit boundary.

Kai: Right, so they’re using this lattice approach to see if that phase of negative two pi over twelve comes out as predicted from the Gauss-Milgram sum of topological spins and the framing anomaly contribution.

Lev: If that number matches what we expect, it validates the lattice setup for U(one) Chern-Simons theory, which is a big deal for any attempt to build something physical from these models <ref:2601.04318#pg1>.

The paper's summary: Kai: Now let's look at what the paper actually summarizes in "Framing Anomaly in Lattice Chern-Simons-Maxwell Theory". They are using a path integral approach on a spacetime cubic lattice with Euclidean signature to define the theory.

Mira: They set up the path integral, which involves a dynamical U(one) gauge connection that lives on each link, and then they look at how this affects the partition function <ref:2601.04318#pg1>.

Lev: I see them reformulating it into a Gaussian integral form involving an action term, which is standard for these kinds of lattice theories, but the specific structure here seems tailored to capture the topological aspects.

Kai: They evaluate the complex phase of that path integral by fitting it with an ansatz involving two terms, one universal and one that depends on the size of the spatial torus.

Mira: The universal part they expect is negative one over twelve, which comes from a piece called Eq. three in their work, but they're interested in isolating the framing anomaly contribution specifically <ref:2601.04318#pg2>.

Lev: So they are trying to separate that universal piece from the finite size effects, which is always the hard part when you're dealing with lattice calculations where things don't quite look continuous yet.

The paper's improvements: Kai: The authors suggest a few key improvements in their approach. One big thing is how they extract the full spectrum of that modular T operator.

Mira: They go beyond just getting the overall phase and they evaluate the expectation of T m for m greater than one, which is done by taking a ratio between Z T m and Z T, as shown in Eq. nine.

Lev: That seems like they are trying to get more information than just the main phase; they want to see if the full spectrum of T actually matches what it should be in the theory.

Kai: They confirm that by evaluating these higher products, they obtain the anticipated form for Z T m, which validates that full spectrum of T in their lattice Chern-Simons theory.

Mira: And on top of that, they introduce concepts like a refined dual lattice and a map called f which needs to be a chain map to satisfy the Leibniz rule Eq. eight for cup products <ref:2601.04318#pg1>.

Lev: That part about the higher cup products and the locality requirement is interesting because it's how they formalize how these topological operators interact with each other on the lattice structure itself, making sure it respects geometry.

Conclusion: Kai: So to wrap up on "Framing Anomaly in Lattice Chern-Simons-Maxwell Theory", the paper confirms that they have successfully pinned down this framing anomaly property.

Mira: This confirms that the chirality is an intrinsic bulk property and it gives us a concrete, solvable lattice model for U(one) Chern-Simons theory that has this crucial feature <ref:2601.04318#pg1,that the chirality is an intrinsic bulk property>.

Lev: It’s important because it provides a concrete example of a UV complete manifestation of framing anomaly, which is different from how chirality comes from fermion bands in other models.

Kai: So the implication here is that we have a solid foundation for understanding and realizing U(one) Chern-Simons theory on the lattice <ref:2601.04318#pg1>.

Mira: It’s not just another calculation; it’s a necessary step toward building a full, physically meaningful lattice definition of this kind of topological field theory.

Lev: For me, it means we have a better benchmark for what real hardware needs to simulate if we want to test these kinds of topological properties at scale.

Kai: That's the gist of it. It’s about connecting the abstract theory down into something that can actually be computed and measured on a lattice.

Ze-An Xu, Jing-Yuan Chen

Institute for Advanced Study, Tsinghua University

hep-th, cond-mat.str-el, hep-lat

Submitted: 2026-01-07

Updated: 2026-11-06

Comments: 7 pages of main text + 22 pages of supplemental material

Journal ref: Phys. Rev. Lett. 137, 191603 (2026)

DOI: 10.1103/hyz3-3kxh

License: http://creativecommons.org/publicdomain/zero/1.0/

Importance score: 88/100

The gist: Framing anomaly is a key property of (2 + 1)d chiral topological orders, for it reveals that the chirality is an intrinsic bulk property of the system…

Key concepts

Framing Anomaly
This is an intrinsic property of (2+1)d chiral topological orders. It shows that chirality is not just at the boundary but exists throughout the bulk of the system. It manifests as a phase dependence in the partition function related to a global choice of basis vectors.
Modular T Operator
This operator acts on the ground state subspace of a spatial torus in lattice models. Evaluating its expectation value provides information about the topological order. The authors used this to find universal phases, which are essential for correctly defining U(1) Chern-Simons theory on a lattice.
Chern-Simons Theory
This is a landmark quantum field theory describing phenomena like the quantum Hall effect. Its chirality leads to gapless edge modes, and its framing anomaly is a key feature that must be correctly captured in any lattice realization of the theory.

Terminology

Summary

Framing anomaly is a key property of (2 + 1)d chiral topological orders, for it reveals that the chirality is an intrinsic bulk property of the system, rather than a property of the boundary between two systems The authors show its framing anomaly in the absence of boundary by computing the expectation of a lattice version of the modular T operator in the ground subspace on a spatial torus, from which they extract that ⟨T⟩ has a universal phase of −2π/12 as expected This pins down the last and most crucial property required for a valid lattice definition of U(1) Chern-Simons theory. p. 0

Where the paper says it

In this work, we show its framing anomaly in the absence of boundary, by computing the expectation of a lattice version of the modular T operator in the ground subspace on a spatial torus, from which we extract that ⟨T⟩ has a universal phase of −2π/12 as expected: −2π/8 from the Gauss-Milgram sum of the topological spins of the ground states, and 2π/24 from the framing anomaly; we can also extract the 2π/24 framing anomaly phase alone from the full spectrum of T in the ground subspace by computing ⟨T m⟩. This pins down the last and most crucial property required for a valid lattice definition of U(1) Chern-Simons theory.

Theoretical Background

Chern-Simons theory is a landmark in the formal development of quantum field theory and describes the quantum Hall effect. A key characterization of a Chern-Simons theory is its chirality, which manifests as gapless chiral edge mode(s). p. 0

Where the paper says it

Among its fascinating topological properties, a key characterization of a Chern-Simons theory is its chirality. Chirality usually manifests in the form of gapless chiral edge mode(s), as has been observed in thermal Hall measurements [4].

Chirality also manifests as framing anomaly, which says the phase of the partition function has a dependence, in units of 2πc−/24, on the global choice of a basis of tangent vectors (a frame) over the spacetime. p. 0
Where the paper says it

But this cannot tell whether chirality is an intrinsic bulk property of a system, or a boundary property between two systems. Importantly, it is an intrinsic bulk property—in the absence of boundary, chirality manifests itself as framing anomaly [2], which says the phase of the partition function has a dependence, in units of 2πc−/24, on the global choice of a basis of tangent vectors (a frame) over the spacetime, where c− is the chiral central charge of the theory.

Associated to this, the modular T operator acts on the ground subspace of a spatial torus as T = e −i2π(h−c−/24) (1). p. 0
Where the paper says it

Associated to this, the modular T operator, see Fig. 1, acts on the ground subspace of a spatial torus as [5] T = e −i2π(h−c−/24) (1) where h is the operator measuring the conformal weight of a ground state, and 2πc−/24 is the framing anomaly.

Lattice Model Construction

The authors define a spacetime lattice realization of the modular T operator acting on a spatial torus and evaluate its expectation in the ground subspace of the lattice Chern-Simons-Maxwell theory. The path integral for the lattice Chern-Simons-Maxwell theory is given by Eq. p. 1

Where the paper says it

Lattice Chern-Simons-Maxwell Theory — We first review the Chern-Simons-Maxwell theory on a spacetime cubic lattice of Euclidean signature. The path integral reads [10, 11] Z = " Y link l Z π −π dAl 2π #   Y plaq p X sp∈Z   " Y cube c Z π −π dλc 2π e iλcdsc # exp ( ik 4π X c [(A ∪ dA)c − (A ∪ 2πs)c − (2πs ∪ A)c] − 1 2e 2 X p F 2 p ) .

(4). The dynamical U(1) gauge connection is Al ∈ (−π, π] on each lattice link l. p. 1
Where the paper says it

The last line is the Maxwell term, which is needed for fundamental reasons as explained in [10, 11, 16], with e 2 the Maxwell coupling in units where the lattice length is set to 1. The dynamical U(1) gauge connection is Al ∈ (−π, π] on each lattice link l.

The path integral can be reformulated as a Gaussian integral Z′ = Y l Z ∞ −∞ dA′ l 2π (7).

Evaluation of the Framing Anomaly

The complex phase of the path integral ZT = Tr T e−βH = Tr T′ e−βH′ is evaluated by fitting the phase with an ansatz 2πC0 + 2πC2L squared (10). The universal contribution C0 is expected to be −1/8 + 1/24 = −1/12 from the universal piece of Eq. p. 3

Where the paper says it

For each value of k and e 2 , we fit the phase with the ansatz 2πC0 + 2πC2L 2 (10) using the L’s in a range L1 ≤ L ≤ L2 for some large enough L1, L2. Here C0 is expected to be −1/8 + 1/24 = −1/12 from the universal piece of Eq.

(3). The evaluation confirms that the evaluated complex phase agrees with the anticipated result Eq. p. 4
Where the paper says it

This confirms that the deviation is indeed a finite size effect, that vanishes exponentially with L. Thus, we have confirmed that the evaluated complex phase agrees with the anticipated result Eq.

(3), with finite size effects vanishing exponentially. p. 4
Where the paper says it

Thus, we have confirmed that the evaluated complex phase agrees with the anticipated result Eq. (3), with finite size effects vanishing exponentially.

Full Spectrum Extraction

To extract the full spectrum of T, they evaluate ⟨T m⟩ for m > 1 as ZTm/ZT3 following Eq. (9). They obtain the anticipated form of Z′Tm, confirming the anticipated full spectrum of T in the lattice Chern-Simons theory. p. 4

Where the paper says it

We indeed obtain the anticipated form of Z ′ Tm , see Fig. 9, thus confirming the anticipated full spectrum of T in the lattice Chern-Simons theory.

Lattice Cup Product and Higher Products

The cup product is defined using a refined dual lattice and a map f that must be a chain map to satisfy the Leibniz rule Eq. (8). Higher cup products are realized as higher homotopies h(i), satisfying Eq. p. 9

Where the paper says it

Correspondingly, in the cohomology of T m, compared to that of T , by the universal coefficient theorem H1 (Tm; A) has an additional torsion part Hom(Zm, A) and H2 (Tm; A) has an additional torsion part A/mA. CUP AND HIGHER CUP PRODUCTS ON GENERAL LATTICES Practically, this section is a preparation for the next section on the fermionic Chern-Simons theories—our lattice modular T operator involves lattice cells of unusual shapes, so we need an approach to define the cup product structures on general lattices other than the usual simplicial or cubic ones.

(30). The locality requirement becomes that h(i)(σ∨σ′) must be geometrically contained in σ′ for any σ, σ′ of the original lattice. p. 0
Where the paper says it

But it will be much more interesting if we can show the celebrated framing anomaly on the lattice, in the absence of boundary. This will not only pin down the last key requirement from a successful lattice realization of U(1) Chern-Simons, but also provide an important example of a UV-complete study of framing anomaly.

Fermionic Realization

For odd k fermionic theories, a sign ambiguity is compensated by a fermionic factor zχ[s] = σχsP p spηp = ±1 (42). This factor is realized through a path integral of fermion worldlines along s mod 2, together with a phase (−1)R sη, where η is a Z2-valued 1-from on the dual lattice. p. 1

Where the paper says it

This ambiguity can be canceled by including in the path integral an extra fermionic path integral zχ[s mod 2], which is a functional of sp mod 2 and takes value ±1 [20], that depends on a spin structure (fermion boundary condition) data [21]. The construction of zχ on cubic lattice [16] is reviewed in the Supplemental Material.

The fermion parity Z2 defect is defined to be the deviation ˜dηtot − w2rep = ˜dη′ mod 2 (57). p. 6
Where the paper says it

) So the problem becomes, how to construct the path integral so that the fermions on the boundary torus are periodic in the x-direction. We should insert a special defect loop that is not a Wilson loop: the (−1) ∈ Z2 flux tube w of (the background gauge field of) the fermion parity Z2 symmetry.

Algorithm for Evaluation

The evaluation of Z′T and Z′Tm uses a recursive algorithm that computes matrix elements of e−βH' using an O(log2 β) algorithm. The final result log ZT is obtained by summing the results from each kx Fourier mode, multiplied by an extra √3L squared Jacobian factor.

Conclusion

In this paper they pinned down the last, and perhaps the most crucial property desired for a “successful” realization of U(1) Chern-Simons theory on the lattice—the framing anomaly (on top of the other key properties studied in [11]). This not only paints a full picture for the decades-long story of “how to realize U(1) Chern-Simons on the lattice”, but also serves as a concrete example of a UV-complete manifestation of framing anomaly, in a way that is different from the ones in which the chirality comes from fermion bands. p. 4

Where the paper says it

Conclusion — In this paper we pinned down the last, and perhaps the most crucial property desired for a “successful” realization of U(1) Chern-Simons theory on the lattice [10, 11]—the framing anomaly (on top of the other key properties studied in [11]). This not only paints a full picture for the decades-long story of “how to realize U(1) Chern-Simons on the lattice”, but also serves as a concrete example of a UV-complete manifestation of framing anomaly, in a way that is different from the ones in which the chirality comes from fermion bands [7].

Acknowledgements

They appreciate Peng Zhang for the suggestion to evaluate ⟨T m⟩ in order to extract the full spectrum of T and thank Meng Cheng for discussion about the fermionic Gauss-Milgram formula. The work is supported by NSFC under Grants No. p. 5

Where the paper says it

We also thank Meng Cheng for discussion about the fermionic Gauss-Milgram formula. This work is supported by NSFC under Grants No.

12447104, No. p. 5
Where the paper says it

This work is supported by NSFC under Grants No. 12447104, No.

12174213 and No. p. 5
Where the paper says it

12447104, No. 12174213 and No.

12342501.

References

[5] E.P. Verlinde, Fusion Rules and Modular Transformations in 2D Conformal Field Theory, Nucl. p. 5

Where the paper says it

, Observed quantization of anyonic heat flow, Nature 545 (2017) 75 [1611. Verlinde, Fusion Rules and Modular Transformations in 2D Conformal Field Theory, Nucl.

Phys. B300 (1988) 360

[7] A. Kitaev, Anyons in an exactly solved model and beyond, Annals Phys. p. 5

Where the paper says it

Turaev, Quantum invariants of knots and three manifolds, vol. Kitaev, Anyons in an exactly solved model and beyond, Annals Phys.

321 (2006) 2

[9] D. Gaiotto and A. p. 5

Where the paper says it

B 90 (2014) 115141 [1201. Gaiotto and A.

Kapustin, Spin TQFTs and fermionic phases of matter, Int. p. 5
Where the paper says it

Gaiotto and A. Kapustin, Spin TQFTs and fermionic phases of matter, Int.

J. Mod. Phys. A 31 (2016) 1645044

[17] T. Jacobson and T. p. 5

Where the paper says it

381 (2021) 293 [1902. Jacobson and T.

Sulejmanpasic, Modified Villain formulation of Abelian Chern-Simons theory, Phys. p. 5
Where the paper says it

Jacobson and T. Sulejmanpasic, Modified Villain formulation of Abelian Chern-Simons theory, Phys.

Rev. D 107 (2023) 125017

[4] Z.-A. Xu and J.-Y. Chen, Lattice Chern-Simons-Maxwell theory and its chirality, JHEP 08 (2025) 062

[16] J.-Y. Chen, Abelian Topological Order on Lattice Enriched with Electromagnetic Background, Commun. p. 5

Where the paper says it

13 (2022) 067 [2107. Chen, Abelian Topological Order on Lattice Enriched with Electromagnetic Background, Commun.

Math. Phys. 381 (2021) 293

[55] where zχ[s] = σχsP p spηp is the fermion parity Z2 defect, which is defined to be the deviation ˜dηtot − w2rep = ˜dη′ mod 2 (57)

[60] Note that more generally, the recursive relation for αβ may contain extra factors coming form the lattice path integral measure R DxM

[62] Since the lattice used to compute T′ consists of two layers, we can first obtain the M, N, and Q matrices corresponding to each of these two layers separately directly form the lattice action

Algorithm 3 Evaluation of ZT

The algorithm for computing Z′T involves a recursive relation that leads to matrix elements of the form ⟨A˜′F T′A′I⟩ = αβ exp −1/2 A˜'F t A'I t Mβ Nβ Nt T' QT' A˜'F A'I. The final result log ZT is obtained by summing the results from each kx Fourier mode, multiplied by an extra √3L squared Jacobian factor.

Algorithm 2 Iteration of e−βH

The algorithm for computing e−βH involves a recursive relation that leads to matrix elements of the form ⟨xF e−(β1+β2)HxI⟩ = p αβ1 αβ2 det(2π)−1(Qβ2 + M1 N1 Nt 2π Q1 + Mβ1 Nα β2 Nt 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + Mβ1) exp − 1/2 x t F x t I Mβ − Nβ (Qα β2 + Mβ1) − 1 N t 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + Mβ1) exp − 1/2 x t F x t I.

Algorithm 3 Single layer update

The algorithm for computing ZT involves a function single layer update which updates the matrices M′, N′, Nt, Q' based on the previous state. The final result log ZT is obtained by summing the results from each kx Fourier mode, multiplied by an extra √3L squared Jacobian factor.

The algorithm for computing e−βH involves a recursive relation that leads to matrix elements of the form ⟨xF e−(β1+β2)HxI⟩ = p αβ1 αβ2 det(2π)−1(Qα β2 + M1 N1 Nt 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + Mβ1) exp − 3/4 x t F x t I Mβ − Nβ (Qα β2 + Mβ1) − 1 Nt 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + M1 Nα νt 4π Qα β1+β2 = p αβ1 αβ2 det(2π)−1(Qα β2 + Mβ1) exp − 3/4 x t F x t I.

The algorithm for computing Z′T involves a recursive relation that leads to matrix elements of the form ⟨A˜′F Z'A'I⟩ = αβ exp −1/2 A˜'F t A'I t MT′ NT′ Nt T' QT' A˜'F A'I. The final result log ZT is obtained by summing the results from each kx Fourier mode, multiplied by an extra √3L squared Jacobian factor.

The algorithm for computing e−βH involves a recursive relation that leads to matrix elements of the form ⟨xF e−(β1+β2)HxI⟩ = p αβ1 αβ2 det(2π)−1(Qα β2 + M1 N1 Nt 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + Mβ1 exp − 3/4 x t F x t I Mβ − Nβ (Qα β2 + Mβ1) − 1 Nt 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + M1 Nα νt 4π Qα β1+β2 = p αβ1 αβ2 det(2π)−1(Qα β2 + Mβ1 exp − 3/4 x t F x t I.

The algorithm for computing e−βH involves a recursive relation that leads to matrix elements of the form ⟨xF e−(β1+β2)HxI⟩ = p αβ1 α β2 det(2π)−1(Qα β2 + M1 N1 Nt 4π Qα β1+β2 = p αβ1 α β2 det(2π)−1(Qα β2 + Mβ1 exp − 3/4 x t F x t I Mβ − Nβ (Qα β2 + Mβ1) − 1 Nt 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + M1 Nα νt 4π Qα β1+β2 = p αβ1 αβ2 det(2π)−1(Qα β2 + Mβ1 exp − 3/4 x t F x t I.

The algorithm for computing e−βH involves a recursive relation that leads to matrix elements of the form ⟨xF e−(β1+β2)HxI⟩ = p α β1 α β2 det(2π)−1(Qα β2 + M1 N1 Nt 4π Qα β1+β2 = p αβ1 α β2 det(2π)−1(Qα β2 + Mβ1 exp − 3/4 x t F x t I Mβ − Nβ (Qα β2 + Mβ1) − 1 Nt 4π Qα β1+β2 = p α β1 α β2 det(2π)−1(Qα β2 + M1 Nα νt 4π Qα β1+β2 = p αβ1 αβ2 det(2π)−1(Qα β2 + Mβ1 exp − 3/4 x t F x t I.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced understanding of lattice topological order via framing anomaly computation: The AI can now compute lattice versions of modular T operators to extract universal phases like 2pi/24, which is crucial for validating a valid lattice definition of U(1) Chern-Simons theory.

  2. Ability to analyze fermionic topological orders: The system can handle the complexities introduced by fermionic systems, including the need for periodic boundary conditions and the compensation of sign ambiguities using fermionic factors like zchi[s].

  3. Implementation of higher cup products and generalized Leibniz rules: The AI can now construct lattice versions of higher cup products (cup1, cup2) on general lattices using refined dual lattices and chain maps to satisfy the Leibniz rule Eq. 8.

  4. Systematic construction of fermionic path integrals: The system can construct the fermionic partition function zchi[s] by explicitly defining the weight function hc[s, chi, chi bar] based on geometric features of cubes, allowing for a more detailed understanding of spin-charge relations.

  5. Algorithmic evaluation of topological invariants: The AI can execute an O(log2 beta) algorithm using recursive matrix updates to evaluate the partition function ZT and ZTm for various lattice sizes L, providing numerical results that agree with anticipated universal forms.

Abstract

Framing anomaly is a key property of (2+1)d chiral topological orders, for it reveals that the chirality is an intrinsic bulk property of the system, rather than a property of the boundary between two systems. Understanding framing anomaly in lattice models is particularly interesting, as concrete, solvable lattice models of chiral topological orders are rare. In a previous work, we defined and solved the U(1) Chern-Simons-Maxwell theory on spacetime lattice, showing its chiral edge mode and the associated gravitational anomaly on boundary. In this work, we show its framing anomaly in the absence of boundary, by computing the expectation of a lattice version of the modular T operator in the ground subspace on a spatial torus, from which we extract that T has a universal phase of-2π/12 as expected: -2π/8 from the Gauss-Milgram sum of the topological spins of the ground states, and 2π/24 from the framing anomaly; we can also extract the 2π/24 framing anomaly phase alone from the full spectrum of T in the ground subspace by computing T m. This pins down the last and most crucial property required for a valid lattice definition of U(1) Chern-Simons theory.

Sources

Related papers