Higgs-Portal Stueckelberg Dark Matter

arXiv:2512.17231 · hep-ph · Submitted 2025-12-19 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Higgs-Portal Stueckelberg Dark Matter".

Mira: Here's the gist of the paper. We study dark photon dark matter X associated with a dark U(1)X gauge symmetry The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators, including both parity-even and parity-odd terms We investigate the freeze-in production of X from Higgs-pair annihilations after reheating, incorporating both gauge-invariant and Stueckelberg-induced operators.

Kai: Dark Photon Model and Interactions The study begins by reviewing the Higgs-portal dark photon DM model up to dimension-6 operators The gauge-invariant interactions between the dark photon and the SM particles up to dimension 6 are described by the Higgs-portal operators (H†H)XµνXµν and (H†H)X˜µνXµν The effective Lagrangian describing a dark photon with mass mX and its interactions with the SM particles up to dimension-6 is given by LVDM = m2 X 2 XµX µ + C Λ 2 O + C˜ Λ 2 O˜, where C and C˜ are the Wilson coefficients associated with the operators in Eqs.

Mira: (1) and (2).

Kai: Stueckelberg Mechanism and Operators The authors employ the Stueckelberg mechanism to generate the dark photon mass without introducing an explicit dark scalar In this setup, the operator (H†H) XµXµ now appears at dimension 4†, and two additional dimension-6 operators relevant to the annihilation of Higgs pairs into DM pairs also emerge, on top of the gauge-invariant dimension-6 operators considered previously.

Title and authors: Mira: So, to recap what we're looking at here, "Higgs-Portal Stueckelberg Dark Matter" is about a dark photon candidate where its mass comes from the Stueckelberg mechanism and its interactions are driven by dimension-six operators connecting it to the Higgs sector.

Kai: It sets up a scenario where kinetic mixing with the Standard Model U(1Y) field strength is forbidden by assigning a dark parity to X that's odd, which means these leading interactions have to come from those dimension-six Higgs portal terms <ref:2512.17231#pg1,kinetic mixing with the Standard Model U>.

Lev: And this paper specifically explores how those interactions, including both parity-even and parity-odd ones, feed into the freeze-in production process of X from Higgs pair annihilations after reheating.

The paper's summary: Kai: So, the core of what they’re doing is taking that previous model—the one with gauge-invariant dimension-six operators—and extending it by including the Stueckelberg extension.

Mira: They introduce a new term, which is a dimension four Higgs portal interaction, plus some extra dimension six operators that come from the Stueckelberg mechanism itself. That’s what they are focusing on now.

Lev: The paper then computes the dark matter relic density by looking at this freeze-in production via scalar-scalar scattering in the Higgs doublet, specifically the process where two Higgs bosons annihilate into two dark photons.

The paper's improvements: Kai: The authors suggest some way to make this analysis more robust. They look at how you can vary the coefficients of those dimension-six gauge-invariant operators, C and C tilde, and also the new terms from the Stueckelberg mechanism.

Mira: They want to systematically map out the parameter space by exploring these different coefficients to see where they hit observable constraints, like the observed dark matter density.

Lev: They're also trying to be rigorous about when this effective field theory actually works, and they check for conditions derived from perturbative unitarity, specifically that the scale required by that must be higher than the cutoff scale of the EFT.

Conclusion: Kai: So, to wrap up, it seems the paper shows that when those coefficients C and C tilde are around one, those gauge-invariant dimension-six operators really dominate how this dark matter is produced through freeze-in.

Mira: They found a specific parameter region where they can still match the observed dark matter relic density for masses like mX around one hundred TeV, with some of the coefficients being very small, like zero point one or ten-five.

Lev: And they also showed that for lighter dark matter masses, around keV scale, you can still get a result consistent with Lyman alpha observations if you lower the cutoff scale and the reheating temperature down.

Kai: So it’s an extension of previous work that incorporates both the freeze-in scenario and this Stueckelberg mass generation method in a way that is consistent with how we think EFT should work.

Mira: It’s a detailed look at how these different terms contribute to the final relic density calculation, showing where they are subdominant and where they take over.

Lev: I just want to say that for real hardware, running this would really depend on controlling those coefficients precisely because the error falls with the square of the sampling interval in that kind of calculation.

Kai: Yeah, that fidelity is key when you’re trying to nail down those mX values we're talking about.

Center for Gravitational Physics and Quantum Information, Yukawa Institute for Theoretical Physics, Kyoto University · Department of Physics, Ibaraki University · Department of Physics, Waseda University

hep-ph

Submitted: 2025-12-19

Updated: 2026-11-05

Comments: 30 pages, 6 figures, 2 tables. Published version in Phys. Rev. D with a minor clarification

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 86/100

The gist: We study dark photon dark matter X associated with a dark U(1)X gauge symmetry The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators…

Key concepts

Higgs-Portal Dark Photon DM Model
This model describes a dark photon (a hypothetical light boson) interacting with the Standard Model through Higgs fields. The interactions are described by effective operators involving the Higgs field, allowing for dark matter to be produced indirectly through couplings to known particles.
Stueckelberg Mechanism
This mechanism is used to give mass to the dark photon without needing an explicit dark scalar particle. It achieves this by introducing specific terms in the Lagrangian that effectively generate a mass term at a lower order, leading to dimension-4 and dimension-6 interactions.
Freeze-in Production
Dark matter is produced when it is created from the thermal bath of Standard Model particles after the universe has reheated. This process involves scalar-scalar scattering ($\phi_i\phi_i \rightarrow XX$) within the Higgs sector, allowing DM to accumulate a relic density.
Dimension-6 Operators
These are higher-order interaction terms in the effective field theory that describe how the dark photon couples to Standard Model particles. The leading interactions considered are these dimension-6 operators, which govern the primary ways dark matter interacts with the Higgs sector.

Terminology

Summary

We study dark photon dark matter X associated with a dark U(1)X gauge symmetry The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators, including both parity-even and parity-odd terms We investigate the freeze-in production of X from Higgs-pair annihilations after reheating, incorporating both gauge-invariant and Stueckelberg-induced operators. p. 0

Where the paper says it

The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators, including both parity-even and parity-odd terms. We assume that the dark matter mass is generated via the Stueckelberg mechanism, which also induces a dimension-4 Higgs-portal operator (H†H)XµXµ and additional dimension-6 operators.

Dark Photon Model and Interactions

The study begins by reviewing the Higgs-portal dark photon DM model up to dimension-6 operators The gauge-invariant interactions between the dark photon and the SM particles up to dimension 6 are described by the Higgs-portal operators (H†H)XµνXµν and (H†H)X˜µνXµν The effective Lagrangian describing a dark photon with mass mX and its interactions with the SM particles up to dimension-6 is given by LVDM = m2 X 2 XµX µ + C Λ 2 O + C˜ Λ 2 O˜, where C and C˜ are the Wilson coefficients associated with the operators in Eqs. (1) and (2).

Stueckelberg Mechanism and Operators

The authors employ the Stueckelberg mechanism to generate the dark photon mass without introducing an explicit dark scalar In this setup, the operator (H†H) XµXµ now appears at dimension 4†, and two additional dimension-6 operators relevant to the annihilation of Higgs pairs into DM pairs also emerge, on top of the gauge-invariant dimension-6 operators considered previously. The full effective Lagrangian considered in this work is LVDM = m2 X 2 XµX µ + C Λ 2 O + C˜ Λ 2 O˜ + λHX(H†H)XµX µ + CXΛ 4 OX. p. 5

Where the paper says it

Here, Treh denotes the reheating temperature, and we assume Treh > mX, as will be discussed later. The full effective Lagrangian considered in this work is LVDM = m2 X 2 XµX µ + C Λ2 O + C˜ Λ2 O˜ + λHX(H †H)XµX µ + CX Λ2 OX.

Freeze-in Production Analysis

The DM is produced via scalar-scalar scattering within the Higgs doublet, namely the process ϕiϕi → XX shown in Figure 1 For the Higgs-portal Stueckelberg DM, the scattering amplitude for ϕiϕi → XX can be roughly estimated by considering the two contributions separately (neglecting interference terms). The corresponding thermally averaged cross sections are then estimated as ⟨σv⟩ ∼ M2 s ∼ λ squared HXT squared m4 X, ⟨σv⟩ ∼ M2 s ∼ C squared XT 6 Λ4 m4 X. p. 7

Where the paper says it

For the Higgs-portal Stueckelberg DM, the scattering amplitude for ϕiϕi → XX can be roughly estimated by considering the two contributions separately (neglecting interference terms): |Mϕiϕi→XX| 2 ∼ λ 2 HX s 2 m4 X , |Mϕiϕi→XX| 2 ∼ C 2 X s 4 Λ4m4 X , (26) where s is the Mandelstam variable, which is roughly s ∼ T 2 for a thermal bath at temperature T. The corresponding thermally averaged cross sections are then estimated as ⟨σv⟩ ∼ |M|2 s ∼ λ 2 HXT 2 m4 X , ⟨σv⟩ ∼ |M|2 s ∼ C 2 XT 6 Λ4m4 X .

Relic Density Constraints and Parameter Space

The present-day DM density parameter is defined as omegaX = ρ(0)X /(3MplH20), given by H0 = 2.13 × 10−42 h GeV (with h ≈ 0. p. 4

Where the paper says it

Once more, after fixing the π = 0 gauge, this operator can be rewritten as a dimension-6 operator, namely (CX/Λ 2 )|DµH| 2 XνXν with CX = 2C¯X m2 X/Λ 2 . Note that once the SM Higgs acquires a vacuum expectation value v = 246 GeV, the dark photon mass is shifted as m2 X → m2 X + λHXv 2 .

7). Using Eq. (48) with Eqs. p. 2
Where the paper says it

The operator O˜ is odd under parity and time-reversal transformations due to the presence of the Levi-Civita tensor ϵµνρσ. The effective Lagrangian describing a dark photon with mass mX and its interactions with the SM particles up to dimension-6 is given by LVDM = m2 X 2 XµX µ + C Λ2 O + C˜ Λ2 O˜, (3) where C and C˜ are the Wilson coefficients associated with the operators in Eqs.

(47) and (49), it follows that the present-day DM density parameter is defined as omegaXh squared = 1. p. 6
Where the paper says it

Next, in Sec. 2, we present the viable parameter space that reproduces the observed DM relic density using the dimension-6 operators in Eqs.

6 × 108 mX/GeV g∗s(T0)/g∗s(Treh) YX(mh). p. 7
Where the paper says it

(27) Assuming a relativistic thermal bath, nϕ ∼ T 3 , and comparing with the Hubble expansion rate H ∼ T 2/Mpl, the freeze-in condition (25) leads to the following upper bounds on the couplings: λHX ≲ m2 X (T 3 rehMpl) 1/2 , (28) CX/Λ 2 ≲ m2 X (T 7 rehMpl) 1/2 , (29) where Treh is the reheating temperature and Mpl = 2. 435 × 1018 GeV is the reduced Planck mass.

p. 7
Where the paper says it

(27) Assuming a relativistic thermal bath, nϕ ∼ T 3 , and comparing with the Hubble expansion rate H ∼ T 2/Mpl, the freeze-in condition (25) leads to the following upper bounds on the couplings: λHX ≲ m2 X (T 3 rehMpl) 1/2 , (28) CX/Λ 2 ≲ m2 X (T 7 rehMpl) 1/2 , (29) where Treh is the reheating temperature and Mpl = 2. 435 × 1018 GeV is the reduced Planck mass.

The observed value is realized along the boundary. p. 1
Where the paper says it

The Stueckelberg mass generation preserves the “U(1)X gauge symmetry”∗ . Without introducing a dark scalar to generate the mass (as in the Higgs mechanism), the mass term is instead realized through the Stueckelberg framework, which remains valid only at energies below the scale at which perturbative unitarity is violated.

p. 1
Where the paper says it

The Stueckelberg mass generation preserves the “U(1)X gauge symmetry”∗ . Without introducing a dark scalar to generate the mass (as in the Higgs mechanism), the mass term is instead realized through the Stueckelberg framework, which remains valid only at energies below the scale at which perturbative unitarity is violated.

Conclusion and Extensions

The Stueckelberg-induced contributions remain subdominant as a consequence of the requirement that the effective scale implied by perturbative unitarity be higher than the cutoff scale of the EFT. We find that when the coefficients of the gauge-invariant dimension-6 operators, C and C˜, are of O(1), these operators dominantly control the freeze-in production of DM. p. 0

Where the paper says it

First, we consider the case in which the Wilson coefficients of the gauge-invariant dimension-6 operators, C and C˜, are of order unity. We find that, in this case, the Stueckelberg contributions remain subdominant in dark matter production.

We have thus extended previous studies by incorporating the freeze-in production scenario alongside the Stueckelberg mass generation mechanism in an EFT-consistent way. p. 1
Where the paper says it

In this work, we examine the freeze-in production of DM and extend the previous scenario by adopting the Stueckelberg mechanism as the origin of the dark photon mass. The Stueckelberg mass generation preserves the “U(1)X gauge symmetry”∗ .

The observed DM relic density can still be reproduced for parameter choices such as mX ≃ 100 TeV, Λ ≃ 1010 GeV, and Treh ≃ 107 GeV, provided that one of the dimensionless coefficients is of 0. p. 8
Where the paper says it

(31) For example, this implies Λ ≳ 1015 GeV for Treh = 1014 GeV and Λ ≳ 109 GeV for Treh = 106 GeV. Thus, the cutoff scale typically needs to exceed the reheating temperature by one to three orders of magnitude.

1, while the remaining three are of O(10−5). p. 3
Where the paper says it

2 Higgs-Portal Stueckelberg Dark Photon DM up to Dimension6 To generate the mass of the dark photon without introducing an explicit dark scalar, we employ the Stueckelberg mechanism (see [7] for review). In this setup, the dark photon acquires a mass while preserving the “U(1)X gauge symmetry”, and the dark parity Xµ → −Xµ ensures the stability of the dark photon as a DM candidate.

The lightest allowed DM mass, mX ≃ O(keV), constrained by Lyman-α observations, can again be realized for lower values of Λ and Treh. p. 1
Where the paper says it

However, current laboratory and cosmological constraints severely restrict the allowed kinetic mixing parameter across a wide mass range [3]. For TeV-scale dark photons, collider constraints lead to a quartic suppression of the small mixing angle in the cross section of pp → X → ℓℓ at the 13 TeV Large Hadron Collider, yielding values well below the order of fb for a mixing angle of 0.

Summary

The paper investigates a dark photon DM candidate X associated with a dark U(1)X gauge symmetry The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators of both parity-even and parity-odd types. The dark photon mass is generated via the Stueckelberg mechanism, which additionally introduces a dimension-4 Higgs-portal interaction and further dimension-6 operators. p. 0

Where the paper says it

The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators, including both parity-even and parity-odd terms. We assume that the dark matter mass is generated via the Stueckelberg mechanism, which also induces a dimension-4 Higgs-portal operator (H†H)XµXµ and additional dimension-6 operators.

p. 0
Where the paper says it

The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators, including both parity-even and parity-odd terms. We assume that the dark matter mass is generated via the Stueckelberg mechanism, which also induces a dimension-4 Higgs-portal operator (H†H)XµXµ and additional dimension-6 operators.

p. 0
Where the paper says it

The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators, including both parity-even and parity-odd terms. We assume that the dark matter mass is generated via the Stueckelberg mechanism, which also induces a dimension-4 Higgs-portal operator (H†H)XµXµ and additional dimension-6 operators.

How the training signal is built

The relevant Higgs-portal operators are given by CΛ squared (H†H) XµνXµν, C˜Λ squared (H†H) X˜µνXµν, λHX(H†H) XµX µ, CXΛ squared DµH 2 XνX ν. The first two terms correspond to the gauge-invariant dimension-6 CP-even and CP-odd Higgs-portal operators, whereas the last two terms are the dimension-4 and dimension-6 operators generated by the Stueckelberg mechanism. p. 6

Where the paper says it

The relevant Higgs-portal operators are given by C Λ2 (H †H) XµνX µν , C˜ Λ2 (H †H) X˜ µνX µν , λHX(H †H) XµX µ , CX Λ2 |DµH| 2 XνX ν . (23) The first two terms correspond to the gauge-invariant dimension-6 CP-even and CP-odd Higgs-portal operators, whereas the last two terms are the dimension-4 and dimension-6 operators generated by the Stueckelberg mechanism.

Where the gains come from

The squared scattering amplitude in Eq. (41) is Mϕiϕi→XX 2 = 2Λ 4 h C 2(s squared − 4mX s + 6m4 X) + C˜2 s(s − 4mX) i, where the symmetry factors for identical particles in both the initial state (ϕiϕi) and the final state (XX) are included. p. 9

Where the paper says it

If the DM mass is larger than the temperature, EA, EB > mX > T, the DM production is exponentially suppressed due to the Boltzmann factors fA,B ≃ exp(−EA,B/T). We assume that the initial-state Higgs bosons are massless, corresponding to the electroweak-symmetric phase.

In the high-energy limit, where s ≫ m2 X, the squared scattering amplitude in Eq. p. 4
Where the paper says it

(13) A notable feature of the dimension-4 Higgs-portal Stueckelberg operator is that the scattering amplitude for longitudinal modes grows with the center-of-mass energy as powers of √ s/mX. This growth leads to a violation of perturbative unitarity at high energies, which results in the condition [5]: smax ≃ m2 X λHX .

(41) can be approximated as Mϕiϕi→XX 2 ≃ 2s 2Λ 4(C squared + C˜ 2). p. 7
Where the paper says it

This condition can be expressed as the reaction rate being smaller than the Hubble expansion rate [14], nϕ⟨σv⟩ < H, (25) where nϕ is the number density of particles in the thermal bath, ⟨σv⟩ is the thermally averaged cross section, and H is the Hubble parameter. For the Higgs-portal Stueckelberg DM, the scattering amplitude for ϕiϕi → XX can be roughly estimated by considering the two contributions separately (neglecting interference terms): |Mϕiϕi→XX| 2 ∼ λ 2 HX s 2 m4 X , |Mϕiϕi→XX| 2 ∼ C 2 X s 4 Λ4m4 X , (26) where s is the Mandelstam variable, which is roughly s ∼ T 2 for a thermal bath at temperature T.

Pruning redundant reasoning tokens

The DM relic density is obtained by integrating Eq. (36) from the reheating temperature down to temperatures of order the Higgs mass, below which the production rate becomes Boltzmann suppressed, i. p. 9

Where the paper says it

The relic density is obtained by integrating Eq. (36) from the reheating temperature down to temperatures of order the Higgs mass, below which the production rate becomes Boltzmann suppressed, i.

e., fA,B ≃ exp(-EA,B/T). p. 9
Where the paper says it

This is justified because, as we show in the next sections, the DM yield is dominantly produced around the reheating temperature for the parameter space of interest and when mX ≪ Treh, the overall 2-body phase-space factor can be approximated as unity. If the DM mass is larger than the temperature, EA, EB > mX > T, the DM production is exponentially suppressed due to the Boltzmann factors fA,B ≃ exp(−EA,B/T).

The DM yield is then given by [9] YX(mh) = YX(Treh) + p gϕ g∗(Treh)/π 2Mpl (C squared + C˜ 2) 135√10Λ4 (T 3reh − m3h). p. 9
Where the paper says it

For a general scattering process AB → CD, the production rate is given by R(T) = gϕ Z fAfB EAEBdEAdEBd cos θAB 1024π 6 Z |MAB→CD| 2 dΩAC, (37) where fA,B = 1 e EA,B/T − 1 (38) are the Bose–Einstein distributions for the Higgs bosons with the corresponding energies EA and EB, respectively. Here, gϕ = 4 is the number of Higgs DOFs, θAB is the angle between the incoming Higgs bosons A and B in the laboratory frame, dΩAC is the solid angle of one of the outgoing particles in the center-of-mass (COM) frame, and |MAB→CD| 2 denotes the squared matrix element of the process AB → CD.

The corresponding DM number density at T = mh is nX(mh) ∝ YX(mh)m3h, so that the DM energy density at T = mh becomes ρX(mh) = nX(mh)mX ∝ m3hmYX(mh). p. 6
Where the paper says it

The number density for the dark matter n' is governed by the following Boltzmann equation, n˙ ' + 3Hn' = R(t) (11) where R(t) is the dark matter production rate per unit volume and per unit time. Here, Hubble parameter H = q ⇢R 3Mpl = qge↵ ⇡2 90 T2 Mpl , where ⇢R is the energy density of the thermal bath, ge↵ is the sum of degree of freedom in the thermal bah, and Mpl is the reduced Planck mass.

We investigate a dark photon DM candidate X associated with a dark U(1)X gauge symmetry The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators of both parity-even and parity-odd types. The dark photon mass is generated via the Stueckelberg mechanism, which additionally introduces a dimension-4 Higgs-portal interaction and further dimension-6 operators.

We investigate a dark photon DM candidate X associated with a dark U(1)X gauge symmetry The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators of both parity-even and parity-odd types. The dark photon mass is generated via the Stueckelberg mechanism, which additionally introduces a dimension-4 Higgs-portal interaction and further dimension-6 operators.

The DM relic density at present is determined as omegaXh squared = 1.6 × 108 mX/GeV g∗s(T0)/g∗s(Treh) YX(mh). The observed value is realized along the boundary.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved analysis of parameter space exploration: The system can perform a more nuanced mapping of dark matter relic density against mass and cutoff scale by systematically varying C, C-tilde, lambda H X, and C bar X as free parameters to identify boundaries consistent with observed values like 0.12.

  2. Enhanced handling of production mechanisms: The system can distinguish between the dominance of gauge-invariant dimension-6 operators when coefficients are O(1) versus the regime where Stueckelberg-induced operators become relevant, including interference effects described by terms like F5 and F7 in the yield equation.

  3. Quantitative assessment of EFT validity: The improved system can rigorously check if the effective field theory is valid by verifying conditions derived from unitarity, such as the effective scale required by perturbative unitarity must exceed the cutoff scale of the EFT, which translates to constraints like |lambda H X| < 1 and |C bar X| < 1.

Abstract

We study dark photon dark matter X associated with a dark U(1) X gauge symmetry. To evade laboratory and cosmological constraints on kinetic mixing with the Standard Model U(1) Y, we assign a Z 2-odd dark parity to X that forbids such mixing. The leading interactions then arise from gauge-invariant dimension-6 Higgs-portal operators, including both parity-even and parity-odd terms. We assume that the dark matter mass is generated via the Stueckelberg mechanism. In the interacting Stueckelberg EFT, a gauge-invariant dimension-6 parent reduces in unitary gauge to the nominal dimension-4 Higgs-portal interaction (H†H)X μX μ, with its coefficient correlated with m X 2/Λ squared, while additional derivative operators are organized by the same longitudinal-mode power counting. We investigate freeze-in production of X from Higgs-pair annihilations after reheating, incorporating both field-strength and Stueckelberg-allowed operators. First, we consider the case in which the Wilson coefficients of the gauge-invariant dimension-6 operators, C and C, are of order unity. Under a conservative single-cutoff power counting in which the strong-coupling scales of the longitudinal mode lie above the cutoff of the field-strength effective theory, we find that the Stueckelberg contributions remain subdominant in dark matter production. We emphasize that this ordering of scales is an explicit assumption rather than a universal consequence of perturbative unitarity. Next, we explore a more general situation in which C and C are smaller than unity. In this second case, Stueckelberg-allowed operators can become comparable and generate contributions proportional to T reh cubed, T reh 5, and T reh 7, including sign-dependent interference effects. For both cases, we show that there exists a wide parameter space consistent with the observed dark matter relic density.

Sources

Related papers