Mechanically Regulated Cranial Growth in Infancy: A Computational Approach to Predicting Craniosynostosis

arXiv:2510.24752 · q-bio.TO, physics.bio-ph · Submitted 2025-10-17 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Genomics Radio. Generated commentary on the latest computational biology and genomics papers.

Ines: We're looking at the paper: "Mechanically Regulated Cranial Growth in Infancy".

Marcus: Here's the gist of the paper. Mechanically driven growth model simulates healthy cranial growth and predicts craniosynostosis dysmorphologies with good agreement to clinical observations<ref:2510.24752#pg2> Model Development and Methodology The study develops a mechanically-driven growth model to simulate healthy cranial growth in the first year, considering simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver<ref:2510.24752#pg3> The algorithm considers strain-based feedback governing growth in bone and suture tissues<ref:2510.24752#pg4> A bulk bone formation approach accounts for evolving mechanical properties, with elastic moduli of bone and sutures increasing monthly<ref:2510.24752#pg10> The model was discretized into reduced integration tetrahedral elements (C3D8R), with enhanced hourglass controls<ref:2510.24752#pg6> Boundary conditions and interactions on the FE model are shown in Figure 1(c)<ref:2510.24752#pg7> Contact interaction was established between the inner skull surface, including bone and sutures faces, with the ICV face<ref:2510.24752#pg7> Constitutive Modeling of Tissues The constitutive models used define brain tissue as a Neo-Hookean hyperelastic material, while bone and suture sections are modeled as linear elastic<ref:2510.24752#pg8> For a Neo-Hookean material, strain energy density is defined by the equation provided in the text<ref:2510.24752#pg8> The growth term of the deformation gradient tensor was defined as a combination of elastic deformation and growth deformation terms<ref:2510.24752#pg9> The brain's growth is modelled as a predetermined factor, resulting in a volume increase by a factor of two by the end of the first year<ref:2510.24752#pg10> Growth Dynamics and Bone Formation The growth increment for the three materials was defined by sets of equations based on deviation from activation stretch scaled by a growth rate<ref:2510.24752#pg9> The bone formation process involves increasing the elastic modulus of the suture elements monthly to account for gradual bone formation<ref:2510.24752#pg10> The elastic modulus of the suture and bone occupied in the growth algorithm were updated over time using a specific rule<ref:2510.24752#pg10> Predictive Outcomes and Clinical Validation The model successfully predicts skull malformation in craniosynostosis cases, showing good agreement with clinical data for known phenotypes<ref:2510.24752#pg17> The algorithm predicted the overall shape of the dysmorphologies with a maximum error of 12% for the metopic craniosynostosis case<ref:2510.24752#pg17> Sensitivity analysis showed that increased bone stiffness enhanced growth by elevating stress and strain stimuli<ref:2510.24752#pg19> The model is potential to predict useful data towards more accurate planning for the surgical intervention in terms of location, time of intervention, as well as correction techniques<ref:2510.24752#pg22> Limitations and Future Directions Limitations include not accounting for the viscoelastic properties of cranial bones, suture and brain tissues<ref:2510.24752#pg20> The study did not incorporate the bone remodelling process on the bone surface within the model<ref:2510.24752#pg20> Furthermore, a simplified elliptical skull geometry was employed instead of a more physiological shape<ref:2510.24752#pg20> The model's reliance on input parameters showed negligible effects on the cephalic indices, indicating minimal impact from parameter variations<ref:2510.24752#pg19> Balanced growth rates among the three interacting tissues were critical to avoid dysmorphologies or over-constrains<ref:2510.24752#pg20> The model's reliance on input parameters was assessed through a sensitivity analysis, evaluating each parameter’s impact relative to a baseline model<ref:2510.24752#pg19> This study presented a physically-based computational model of a coupled skull growth and volumetric ICV growth with a strain-feedback loop growth governing tissue deformation in sutures and bones<ref:2510.24752#pg20> The coupled growth of brain and skull reconstructions during development in the model allows assessment of their mechanical interactions, and mechanical consequences in each craniosynostosis cases<ref:2510.24752#pg20> The model is potential to predict useful data towards more accurate planning for the surgical intervention in terms of location, time of intervention, as well as correction techniques<ref:2510.24752#pg22> References Libby, J.

Ines: et al.

Marcus: Modelling human skull growth: a validated computational model.

Ines: J R Soc Interface 14, (2017)<ref:2510.24752#pg4> Malde, O.

Paper summary: Ines: So, wrapping up this discussion on the paper "Mechanically Regulated Cranial Growth in Infancy: A Computational Approach to Predicting Craniosynostosis," it’s about using a mechanical simulation to map how brain growth drives skull shape development.

Marcus: They are essentially taking the interplay between the brain expanding and the bone plates changing shape because of that expansion, and they’re using finite element analysis to see what happens when sutures fuse too early in craniosynostosis.

Yuki: What this really means is that we can get a mechanical picture of these developmental disorders, moving beyond just genetics or static measurements to understand the forces at play in real time during growth.

Ines: They’ve shown good agreement with clinical observations for known phenotypes, and they've predicted the overall shape of the dysmorphologies with a maximum error of twelve percent for that metopic case.

Marcus: It’s a tool meant to help predict how much of an intervention might be needed, whether it's about where to operate or when to operate.

Yuki: It opens up new avenues for understanding the mechanical consequences in different craniosynostosis cases, which is valuable for clinical planning and treatment correction techniques.

Conclusion: Ines: It’s focused on taking that physical interaction—the mechanical regulation—and using it to simulate how a skull grows when something goes wrong.

Yuki: From a population standpoint, this suggests that the way these tissues interact during early development is a predictable force we can model.

Marcus: Yeah, and the authors are using finite element analysis to build this simulation of brain expansion coupled with bone deformation. It’s about modeling those strain feedbacks in the bone and suture tissues as they grow.

Ines: What I find interesting is how they set up the constitutive models, treating brain tissue as a Neo-Hookean hyperelastic material while the bones are linear elastic. That’s a specific way to handle the physical behavior of those different materials.

Yuki: That’s important because it shows we have different rules for how brain stuff behaves versus how bone stuff behaves during this critical period of development.

Marcus: And they use this model to show good agreement with real clinical data for known craniosynostosis cases, which is a big deal when you’re dealing with patient outcomes.

Ines: The implication here is that we might be able to predict the overall shape of these dysmorphologies, even before surgery, by understanding the mechanical constraints involved.

Yuki: So it moves us closer to having better planning for surgical interventions because we can anticipate the resulting structure.

Marcus: It definitely gives us a way to look at correction techniques from a biomechanical standpoint, which is useful for figuring out where and when to intervene in these cases.

Ines: We’ve seen how this model handles the mechanics, but what’s still left is addressing those limitations they mentioned, like not fully accounting for viscoelasticity or the remodeling process on the bone surface.

Yuki: That’s a fair point; while this simulation is powerful, it’s not a perfect replication of every single biological nuance.

Marcus: Exactly. It shows what we can do with current computational methods to understand these complex interactions in skull growth, but there's still work to do on those finer biological details.

Biomechanics Research Centre (BMEC) · School of Engineering, Institute for Health Discovery and Innovation, College of Science and Engineering, University of Galway

q-bio.TO, physics.bio-ph

Submitted: 2025-10-17

Updated: 2025-10-17

Comments: 24 Pages, 10 Figure, 5 Tables

DOI: 10.1007/s10237-026-02118-x

License: http://creativecommons.org/licenses/by-nc-nd/4.0/

Importance score: 81/100

The gist: Mechanically driven growth model simulates healthy cranial growth and predicts craniosynostosis dysmorphologies with good agreement to clinical observations<ref:2510.24752#pg2> Model Development and…

Key concepts

Mechanically Driven Growth Model
This is a computational simulation that models how the skull grows based on physical forces. It treats the brain's volume increase as the main driver, which then causes changes in the shape and stiffness of the cranial bones and sutures over time.
Strain-Based Feedback
The algorithm uses strain feedback to govern growth in bone and suture tissues. This means that how much a bone or suture grows is directly related to the mechanical stress (strain) it is currently experiencing, simulating real biological responses to physical forces.
Constitutive Modeling of Tissues
The model uses different mathematical rules (constitutive models) for different parts of the head. Brain tissue is modeled as a hyperelastic material, while bone and sutures are treated as linear elastic materials. This allows the simulation to accurately reflect how these tissues behave mechanically during development.

Terminology

Summary

Mechanically driven growth model simulates healthy cranial growth and predicts craniosynostosis dysmorphologies with good agreement to clinical observations<ref:2510. p. 1

Where the paper says it

A bulk bone formation approach accounts for evolving mechanical properties, with elastic moduli of bone and sutures increasing monthly. The model was applied on individual fused sutures and skull dysmorphologies due to craniosynostosis were predicted, and results showed good agreement with clinically observations.

24752#pg2>

Model Development and Methodology

The study develops a mechanically-driven growth model to simulate healthy cranial growth in the first year, considering simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver<ref:2510.24752#pg3> The algorithm considers strain-based feedback governing growth in bone and suture tissues<ref:2510. p. 1

Where the paper says it

This study develops a mechanically-driven growth model to simulate healthy cranial growth in the first year. The algorithm considers simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver, with strain-based feedback governing growth in bone and suture tissues.

24752#pg4> A bulk bone formation approach accounts for evolving mechanical properties, with elastic moduli of bone and sutures increasing monthly<ref:2510. p. 1
Where the paper says it

The algorithm considers simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver, with strain-based feedback governing growth in bone and suture tissues. A bulk bone formation approach accounts for evolving mechanical properties, with elastic moduli of bone and sutures increasing monthly.

24752#pg10> The model was discretized into reduced integration tetrahedral elements (C3D8R), with enhanced hourglass controls<ref:2510. p. 4
Where the paper says it

𝐶𝐼 = 𝑚𝑎𝑥𝑖𝑚𝑎𝑙 𝑤𝑖𝑑𝑡ℎ 𝑚𝑎𝑥𝑖𝑚𝑎𝑙 𝑙𝑒𝑛𝑔𝑡ℎ . 100% (1) The model was discretised into reduced integration tetrahedral elements (C3D8R), with enhanced hourglass controls.

24752#pg6> Boundary conditions and interactions on the FE model are shown in Figure 1(c)<ref:2510. p. 5
Where the paper says it

5 Figure 1 FE Model preparation; (a) Idealised skull and ICV geometry for FE model, (b) mesh intensity on material sections, (c) boundary conditions applied. The boundary conditions and interactions on the FE model are shown in Figure 1(c).

24752#pg7> Contact interaction was established between the inner skull surface, including bone and sutures faces, with the ICV face<ref:2510. p. 5
Where the paper says it

The bone-suture interface was assumed to be perfectly connected. Contact interaction was established between the inner skull surface, including bone and sutures faces, with the ICV face.

24752#pg7>

Constitutive Modeling of Tissues

The constitutive models used define brain tissue as a Neo-Hookean hyperelastic material, while bone and suture sections are modeled as linear elastic<ref:2510.24752#pg8> For a Neo-Hookean material, strain energy density is defined by the equation provided in the text<ref:2510. p. 5

Where the paper says it

𝑭 𝑔 (2) Constitutively, the elastic contribution of each material was defined based on their strain energy density functions (𝑊) 24,25 . Brain tissue was considered a Neo-Hookean hyperelastic material, while bone and suture sections were modelled as linear elastic.

24752#pg8> The growth term of the deformation gradient tensor was defined as a combination of elastic deformation and growth deformation terms<ref:2510. p. 6
Where the paper says it

For a Neo-Hookean material, Cauchy stress can be calculated based on the left Cauchy-Green tensor 𝒃 as, 𝝈 = 𝜇 𝐽 (𝒃 − 𝑰) − 𝜆 𝐽 (ln 𝐽)𝑰 (5) For a linear elastic material, the Cauchy stress is a linear function of the small strain tensor, and can be calculated based on the elasticity tensor 𝑪, known as Hooke’s Law, 𝝈 = 𝑪: 𝜺 (6) 2. 3 Anisotropic Growth Implementation Besides the elastic deformation contribution term, which is calculated based on finite strain theory, the growth term of the deformation gradient tensor was defined as, 𝑭 𝑔 = [ 𝑭 𝑔 (1,1) 0 0 0 𝑭 𝑔 (2,2) 0 0 0 𝑭 𝑔 (3,3) ] (7) The growth matrices in Equation (7) were defined individually in the principal directions of the local material orientations, for each respective tissue.

24752#pg9> The brain's growth is modelled as a predetermined factor, resulting in a volume increase by a factor of two by the end of the first year<ref:2510.24752#pg10>

Growth Dynamics and Bone Formation

The growth increment for the three materials was defined by sets of equations based on deviation from activation stretch scaled by a growth rate<ref:2510.24752#pg9> The bone formation process involves increasing the elastic modulus of the suture elements monthly to account for gradual bone formation<ref:2510. p. 8

Where the paper says it

To represent the bone formation process within skull, bulk bone formation scheme 2,12 was applied on the whole suture elements. According to this scenario, the elastic modulus of the suture elements was increased monthly, at individual steps.

24752#pg10> The elastic modulus of the suture and bone occupied in the growth algorithm were updated over time using a specific rule<ref:2510. p. 8
Where the paper says it

To accommodate this feature, the bulk mechanical properties of bone tissue also increased monthly in the algorithm. Therefore, the elastic modulus of the suture and bone occupied in the growth algorithm were updated over time using the following rule.

24752#pg10>

Predictive Outcomes and Clinical Validation

The model successfully predicts skull malformation in craniosynostosis cases, showing good agreement with clinical data for known phenotypes<ref:2510.24752#pg17> The algorithm predicted the overall shape of the dysmorphologies with a maximum error of 12% for the metopic craniosynostosis case<ref:2510. p. 3

Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

24752#pg17> Sensitivity analysis showed that increased bone stiffness enhanced growth by elevating stress and strain stimuli<ref:2510. p. 1
Where the paper says it

Stress at bone-suture interfaces and elevated intracranial pressure under fused sutures highlighted biomechanical impacts due to the disorders. Sensitivity analysis explored how material properties and growth rates affect skull shape.

24752#pg19> The model is potential to predict useful data towards more accurate planning for the surgical intervention in terms of location, time of intervention, as well as correction techniques<ref:2510.24752#pg22>

Limitations and Future Directions

Limitations include not accounting for the viscoelastic properties of cranial bones, suture and brain tissues<ref:2510.24752#pg20> The study did not incorporate the bone remodelling process on the bone surface within the model<ref:2510. p. 3

Where the paper says it

For effective and accurate predictions of cranial growth, robust, mathematically formulated kinematic growth models must be employed that appropriately incorporate continuous volumetric brain expansion, evolving mechanical properties of cranial tissues, and the complex biomechanical interactions between bone, sutures, and the underlying ICV. The objective of this study is to develop a physically-based growth model to predict the skull and calvaria development within the first year of age, for healthy and craniosynostosis cases.

24752#pg20> Furthermore, a simplified elliptical skull geometry was employed instead of a more physiological shape<ref:2510.24752#pg20> The model's reliance on input parameters showed negligible effects on the cephalic indices, indicating minimal impact from parameter variations<ref:2510.24752#pg19> Balanced growth rates among the three interacting tissues were critical to avoid dysmorphologies or over-constrains<ref:2510. p. 7
Where the paper says it

Figure 2 Local material orientation for skull sections and directional growth of sutures. The governing equations for growth of the three tissues involved were described individually.

24752#pg20> The model's reliance on input parameters was assessed through a sensitivity analysis, evaluating each parameter’s impact relative to a baseline model<ref:2510.24752#pg19>

Conclusion

This study presented a physically-based computational model of a coupled skull growth and volumetric ICV growth with a strain-feedback loop growth governing tissue deformation in sutures and bones<ref:2510.24752#pg20> The coupled growth of brain and skull reconstructions during development in the model allows assessment of their mechanical interactions, and mechanical consequences in each craniosynostosis cases<ref:2510. p. 3

Where the paper says it

For effective and accurate predictions of cranial growth, robust, mathematically formulated kinematic growth models must be employed that appropriately incorporate continuous volumetric brain expansion, evolving mechanical properties of cranial tissues, and the complex biomechanical interactions between bone, sutures, and the underlying ICV. The objective of this study is to develop a physically-based growth model to predict the skull and calvaria development within the first year of age, for healthy and craniosynostosis cases.

24752#pg20> The model is potential to predict useful data towards more accurate planning for the surgical intervention in terms of location, time of intervention, as well as correction techniques<ref:2510.24752#pg22>

References

Libby, J. et al. Modelling human skull growth: a validated computational model. p. 3

Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

J R Soc Interface 14, (2017)<ref:2510. p. 5
Where the paper says it

The ICV and skull surfaces are fixed from the bottom 𝑥𝑦 plane, and to constrain in plane rotations, 𝑋-fixed and 𝑌- fixed nodes on the ICV are fixed in constrained in 𝑥 and 𝑦 directions, respectively. The bone-suture interface was assumed to be perfectly connected.

p. 5
Where the paper says it

The ICV and skull surfaces are fixed from the bottom 𝑥𝑦 plane, and to constrain in plane rotations, 𝑋-fixed and 𝑌- fixed nodes on the ICV are fixed in constrained in 𝑥 and 𝑦 directions, respectively. The bone-suture interface was assumed to be perfectly connected.

24752#pg4> Malde, O. et al. Predicting calvarial morphology in sagittal craniosynostosis. p. 3
Where the paper says it

The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 . Using this algorithm, sensitivity analysis on postoperative calvarial growth in sagittal craniosynostosis revealed that the most impactful parameter on the predicted skull morphology was the elastic modulus of the craniotomies 12 .

p. 3
Where the paper says it

The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 . Using this algorithm, sensitivity analysis on postoperative calvarial growth in sagittal craniosynostosis revealed that the most impactful parameter on the predicted skull morphology was the elastic modulus of the craniotomies 12 .

Scientific Reports 2020 10:1<ref:2510.24752#pg4> Richtsmeier, J. T. & Flaherty, K. Hand in glove: brain and skull in development and dysmorphogenesis. p. 0
Where the paper says it

vaughan@universityofgalway. ie Keywords Cranial Growth, Craniosynostosis, Skull Development, Brain Growth, Suture Growth

p. 0
Where the paper says it

vaughan@universityofgalway. ie Keywords Cranial Growth, Craniosynostosis, Skull Development, Brain Growth, Suture Growth

Acta Neuropathologica 2013 125:4<ref:2510.24752#pg4> Barbeito-Andrés, J., Bonfili, N., Nogué, J. M., Bernal, V. & Gonzalez, P. N. Modeling the effect of brain growth on cranial bones using finite-element analysis and geometric morphometrics. p. 2
Where the paper says it

This highlights the importance of understanding the biomechanical contributions towards cranial growth, which includes the mechanical interactions between the brain growth, its forces on soft tissue and bone plates, that leads to the development of the final shape of the skull in infants 1 . Given the complexities of in vivo experimentation and indeed ethical challenges associated with studying infant cranial development, computational techniques such as finite element analysis (FEA) have become increasingly valuable for predicting cranial biomechanics and growth.

p. 2
Where the paper says it

This highlights the importance of understanding the biomechanical contributions towards cranial growth, which includes the mechanical interactions between the brain growth, its forces on soft tissue and bone plates, that leads to the development of the final shape of the skull in infants 1 . Given the complexities of in vivo experimentation and indeed ethical challenges associated with studying infant cranial development, computational techniques such as finite element analysis (FEA) have become increasingly valuable for predicting cranial biomechanics and growth.

Surgical and Radiologic Anatomy 42<ref:2510. p. 2
Where the paper says it

Treatments of this condition require multidisciplinary experts and involve invasive surgery in most cases. However, blood loss and surgical time are significant concerns for the young patients, and there is a need for less invasive yet efficient techniques 10,13 .

p. 2
Where the paper says it

Treatments of this condition require multidisciplinary experts and involve invasive surgery in most cases. However, blood loss and surgical time are significant concerns for the young patients, and there is a need for less invasive yet efficient techniques 10,13 .

24752#pg4> Morriss-Kay, G. M. & Wilkie, A. O. M. Growth of the normal skull vault and its alteration in craniosynostosis: insights from human genetics and experimental studies. p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

J Anat 207<ref:2510.24752#pg4> Weickenmeier, J., Fischer, C., Carter, D., Kuhl, E. & Goriely, A. Dimensional, Geometrical, and Physical Constraints in Skull Growth. p. 3
Where the paper says it

However, these models only considered short term growth periods 20 , and brain growth was implemented as multiple volume increase intervals, not as a gradual continuous volumetric growth process, as it inherently is 2,21 . More advanced kinematic volumetric growth models, such as that developed by 6 , have also been used to investigate the geometrical and dimensional constraints in skull growth.

p. 3
Where the paper says it

However, these models only considered short term growth periods 20 , and brain growth was implemented as multiple volume increase intervals, not as a gradual continuous volumetric growth process, as it inherently is 2,21 . More advanced kinematic volumetric growth models, such as that developed by 6 , have also been used to investigate the geometrical and dimensional constraints in skull growth.

(2017) doi:10.1103/PhysRevLett.118.248101<ref:2510.24752#pg7> Lee, C., Richtsmeier, Jj. T. & Kraft, R. H. A Computational Analysis of Bone Formation in the Cranial Vault Using A Coupled Reaction-Diffusion-Strain Model. p. 2
Where the paper says it

Given the complexities of in vivo experimentation and indeed ethical challenges associated with studying infant cranial development, computational techniques such as finite element analysis (FEA) have become increasingly valuable for predicting cranial biomechanics and growth. At a cellular level, a computational model for mechanobiological bone formation mechanism in cranial vault has been developed, by coupling reaction-diffusion algorithms with structural mechanics 7 .

p. 2
Where the paper says it

Given the complexities of in vivo experimentation and indeed ethical challenges associated with studying infant cranial development, computational techniques such as finite element analysis (FEA) have become increasingly valuable for predicting cranial biomechanics and growth. At a cellular level, a computational model for mechanobiological bone formation mechanism in cranial vault has been developed, by coupling reaction-diffusion algorithms with structural mechanics 7 .

J Mech Med Biol 17<ref:2510.24752#pg4> Marghoub, A. et al. Predicting calvarial growth in normal and craniosynostotic mice using a computational approach. p. 0
Where the paper says it

Mechanically Regulated Cranial Growth in Infancy: A Computational Approach to Predicting Craniosynostosis Mahtab Vafaeefar1 , Conall Quinn1 , Ted J. Vaughan1 1 Biomechanics Research Centre (BMEC), School of Engineering, Institute for Health Discovery and Innovation, College of Science and Engineering, University of Galway, Ireland.

p. 0
Where the paper says it

Mechanically Regulated Cranial Growth in Infancy: A Computational Approach to Predicting Craniosynostosis Mahtab Vafaeefar1 , Conall Quinn1 , Ted J. Vaughan1 1 Biomechanics Research Centre (BMEC), School of Engineering, Institute for Health Discovery and Innovation, College of Science and Engineering, University of Galway, Ireland.

J Anat 232<ref:2510.24752#pg4> Cross, C. et al. A Computational Framework to Predict Calvarial Growth: Optimising Management of Sagittal Craniosynostosis. p. 3
Where the paper says it

The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 . Using this algorithm, sensitivity analysis on postoperative calvarial growth in sagittal craniosynostosis revealed that the most impactful parameter on the predicted skull morphology was the elastic modulus of the craniotomies 12 .

p. 3
Where the paper says it

The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 . Using this algorithm, sensitivity analysis on postoperative calvarial growth in sagittal craniosynostosis revealed that the most impactful parameter on the predicted skull morphology was the elastic modulus of the craniotomies 12 .

Front Bioeng Biotechnol 10<ref:2510.24752#pg4> Malde, O., Libby, J. & Moazen, M. An Overview of Modelling Craniosynostosis Using the Finite Element Method. p. 1
Where the paper says it

This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis. Keywords: Craniosynostosis, growth, cranial growth, suture fusion, finite element modelling

p. 1
Where the paper says it

This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis. Keywords: Craniosynostosis, growth, cranial growth, suture fusion, finite element modelling

Mol Syndromol 10<ref:2510.24752#pg4> Kimonis, V., Gold, J. A., Hoffman, T. L., Panchal, J. & Boyadjiev, S. A. Genetics of Craniosynostosis. p. 0
Where the paper says it

Mechanically Regulated Cranial Growth in Infancy: A Computational Approach to Predicting Craniosynostosis Mahtab Vafaeefar1 , Conall Quinn1 , Ted J. Vaughan1 1 Biomechanics Research Centre (BMEC), School of Engineering, Institute for Health Discovery and Innovation, College of Science and Engineering, University of Galway, Ireland.

Semin Pediatr Neurol 14<ref:2510.24752#pg4> Cross, C. et al. Using Sensitivity Analysis to Develop a Validated Computational Model of Postoperative Calvarial Growth in Sagittal Craniosynostosis. p. 3
Where the paper says it

The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 . Using this algorithm, sensitivity analysis on postoperative calvarial growth in sagittal craniosynostosis revealed that the most impactful parameter on the predicted skull morphology was the elastic modulus of the craniotomies 12 .

Front Cell Dev Biol 9<ref:2510.24752#pg4> Augello, M. et al. The Use of Finite Element Method Analysis for Modeling Different Osteotomy Patterns and Biomechanical Analysis of Craniosynostosis Correction. p. 3
Where the paper says it

The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 . Using this algorithm, sensitivity analysis on postoperative calvarial growth in sagittal craniosynostosis revealed that the most impactful parameter on the predicted skull morphology was the elastic modulus of the craniotomies 12 .

Journal of Craniofacial Surgery 30<ref:2510. p. 2
Where the paper says it

Correction techniques for craniosynostosis primarily aim to restore normal skull growth by reopening fused sutures and creating space for the expanding brain, restoring a more typical head shape and preventing further neurological complications. Treatments of this condition require multidisciplinary experts and involve invasive surgery in most cases.

24752#pg4> Liang, C. et al. Normal human craniofacial growth and development from 0 to 4 years. p. 2
Where the paper says it

However, blood loss and surgical time are significant concerns for the young patients, and there is a need for less invasive yet efficient techniques 10,13 . Efficient treatment plans require a deep understanding of normal craniofacial development that relies on insight into how growth dynamics interplay within the cranium 14 .

Sci Rep 13<ref:2510.24752#pg4> Jin, J. et al. Hybrid simulation of brain–skull growth. p. 0
Where the paper says it

vaughan@universityofgalway. ie Keywords Cranial Growth, Craniosynostosis, Skull Development, Brain Growth, Suture Growth

Simulation 90<ref:2510.24752#pg4> Marghoub, A. et al. Characterizing and Modeling Bone Formation during Mouse Calvarial Development. p. 3
Where the paper says it

The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 . Using this algorithm, sensitivity analysis on postoperative calvarial growth in sagittal craniosynostosis revealed that the most impactful parameter on the predicted skull morphology was the elastic modulus of the craniotomies 12 .

Phys Rev Lett 122<ref:2510.24752#pg4> Cross, C. et al. Predicting and comparing three corrective techniques for sagittal craniosynostosis. p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

Scientific Reports 2021 11<ref:2510.24752#pg4> Goriely, A. & Moulton, D. Morphoelasticity: A theory of elastic growth. p. 5
Where the paper says it

These surfaced were initially in contact and were allowed movement during growth process. 2 Constitutive Models and Continuum Growth Theory In addition to the theory of morphoelasticity 22 , nonlinear field theories of mechanics have been used to mathematically simulate finite growth in elastic materials 6 .

in New Trends in the Physics and Mechanics of Biological Systems (2011)<ref:2510. p. 2
Where the paper says it

The peripheral suture tissue is crucial to new bone deposition sites during skull growth and development in infants 1 . Cranial and skull growth is a complex and highly regulated process that involves coordinated biological, chemical, and mechanical signalling to drive development of bones, sutures, and the underlying brain 2,3 .

24752#pg7> Kuhl, E. Growing matter: A review of growth in living systems. p. 5
Where the paper says it

2 Constitutive Models and Continuum Growth Theory In addition to the theory of morphoelasticity 22 , nonlinear field theories of mechanics have been used to mathematically simulate finite growth in elastic materials 6 . From continuum mechanics, the deformation matrix of the growing system 𝝋, maps the material point 𝑋 at time 𝑡 to the spatial point 𝒙 = 𝝋(𝑿,𝑡).

J Mech Behav Biomed Mater 29<ref:2510.24752#pg4> Bonet, J. & Wood, R. D. Nonlinear Continuum Mechanics for Finite Element Analysis (Cambridge University Press, 2008). p. 5
Where the paper says it

These surfaced were initially in contact and were allowed movement during growth process. 2 Constitutive Models and Continuum Growth Theory In addition to the theory of morphoelasticity 22 , nonlinear field theories of mechanics have been used to mathematically simulate finite growth in elastic materials 6 .

doi:https://doi.org/10.1017/CBO9780511755446<ref:2510.24752#pg4> Holzapfel, G. A. Nonlinear solid mechanics: a continuum approach for engineering. p. 5
Where the paper says it

These surfaced were initially in contact and were allowed movement during growth process. 2 Constitutive Models and Continuum Growth Theory In addition to the theory of morphoelasticity 22 , nonlinear field theories of mechanics have been used to mathematically simulate finite growth in elastic materials 6 .

455 Preprint at (2000). doi:https://doi.org/10.1103/PhysRevLett.86<ref:2510.24752#pg4> Dekaban, A. S. Tables of cranial and orbital measurements, cranial volume, and derived indexes in males and females from 7 days to 20 years of age. p. 3
Where the paper says it

For effective and accurate predictions of cranial growth, robust, mathematically formulated kinematic growth models must be employed that appropriately incorporate continuous volumetric brain expansion, evolving mechanical properties of cranial tissues, and the complex biomechanical interactions between bone, sutures, and the underlying ICV. The objective of this study is to develop a physically-based growth model to predict the skull and calvaria development within the first year of age, for healthy and craniosynostosis cases.

Ann Neurol 2, 485–491 (1977)<ref:2510.24752#pg4> Kajdic, N., Spazzapan, P. & Velnar, T. Craniosynostosis - Recognition, clinical characteristics, and treatment. p. 1
Where the paper says it

Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

p. 1
Where the paper says it

Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

p. 1
Where the paper says it

Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

Biomolecules and Biomedicine 18<ref:2510.24752#pg4> Liu, J., Froelicher, J. H., French, B., Linguraru, M. G. & Porras, A. R. Data-driven cranial suture growth model enables predicting phenotypes of craniosynostosis. p. 1
Where the paper says it

This study develops a mechanically-driven growth model to simulate healthy cranial growth in the first year. The algorithm considers simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver, with strain-based feedback governing growth in bone and suture tissues.

p. 1
Where the paper says it

This study develops a mechanically-driven growth model to simulate healthy cranial growth in the first year. The algorithm considers simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver, with strain-based feedback governing growth in bone and suture tissues.

p. 1
Where the paper says it

This study develops a mechanically-driven growth model to simulate healthy cranial growth in the first year. The algorithm considers simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver, with strain-based feedback governing growth in bone and suture tissues.

Scientific Reports 2023 13<ref:2510.24752#pg4> Bozkurt, S., Borghi, A., Jeelani, O., Dunaway, D. & Schievano, S. Computational modelling of patient specific spring assisted lambdoid craniosynostosis correction. p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

p. 3
Where the paper says it

Both approaches predicted the overall morphology of the skull after growth, with differences in predicted levels of contact pressure on brain 12 . The bone formation modelling approach for growth was later extended to human skulls to evaluate the efficacy of different correction techniques for sagittal craniosynostosis 9,21 .

Scientific Reports 2020 10<ref:2510.24752#pg4> J, J., R, E. & S, R. Skull Development Simulation Model for Craniosynostosis Surgery Planning. p. 1
Where the paper says it

Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

p. 1
Where the paper says it

Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

p. 1
Where the paper says it

Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

p. 1
Where the paper says it

Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

Biol Eng Med 3<ref:2510.24752#pg4> Bozkurt, S. et al. Computational modelling of patient specific spring assisted lambdoid craniosynostosis correction. Scientific Reports 2020 10<ref:2510.24752#pg4> J, J., R, E. & S, R. Skull Development Simulation Model for Craniosynostosis Surgery Planning. Biol Eng Med 3<ref:2510.24752#pg4> Kajdic, N., Spazzapan, P. & Velnar, T. Craniosynostosis - Recognition, clinical characteristics, and treatment. Biomolecules and Biomedicine 18<ref:2510.24752#pg4> Liu, J., Froelicher, J. H., French, B., Linguraru, M. G. & Porras, A. R. Data-driven cranial suture growth model enables predicting phenotypes of craniosynostosis. Scientific Reports 2023 13<ref:2510.24752#pg4> Bozkurt, S., Borghi, A., Jeelani, O., Dunaway, D. & Schievano, S. Computational modelling of patient specific spring assisted lambdoid craniosynostosis correction. Scientific Reports 2020 10<ref:2510.24752#pg4> J, J., R, E. & S, R. Skull Development Simulation Model for Craniosynostosis Surgery Planning. Biol Eng Med 3<ref:2510.24752#pg4> Kajdic, N., Spazzapan, P. & Velnar, T. Craniosynostosis - Recognition, clinical characteristics, and treatment. Biomolecules and Biomedicine 18<ref:2510.24752#pg4> Liu, J., Froelicher, J. H., French, B., Linguraru, M. G. & Porras, A. R. Data-driven cranial suture growth model enables predicting phenotypes of craniosynostosis. Scientific Reports 2023 13<ref:2510.24752#pg4> Bozkurt, S., Borghi, A., Jeelani, O., Dunaway, D. & Schievano, S. Computational modelling of patient specific spring assisted lambdoid craniosynostosis correction. Scientific Reports 2020 10<ref:2510.24752#pg4> J, J., R, E. & S, R. Skull Development Simulation Model for Craniosynostosis Surgery Planning. Biol Eng Med 3<ref:2510.24752#pg4>

  1. Libby, J. et al. Modelling human skull growth: a validated computational model. J R Soc Interface 14, (2017)<ref:2510.24752#pg4>

  2. Malde, O. et al. Predicting calvarial morphology in sagittal craniosynostosis. Scientific Reports 2020 10:1<ref:2510.24752#pg4>

  3. Richtsmeier, J. T. & Flaherty, K. Hand in glove: brain and skull in development and dysmorphogenesis. Acta Neuropathologica 2013 125:4<ref:2510.24752#pg4>

  4. Barbeito-Andrés, J., Bonfili, N., Nogué, J. M., Bernal, V. & Gonzalez, P. N. Modeling the effect of brain growth on cranial bones using finite-element analysis and geometric morphometrics. Surgical and Radiologic Anatomy 42<ref:2510.24752#pg4>

  5. Morriss-Kay, G. M. & Wilkie, A. O. M. Growth of the normal skull vault and its alteration in craniosynostosis: insights from human genetics and experimental studies. J Anat 207<ref:2510.24752#pg4>

  6. Weickenmeier, J., Fischer, C., Carter, D., Kuhl, E. & Goriely, A. Dimensional, Geometrical, and Physical Constraints in Skull Growth. (2017) doi:10.1103/PhysRevLett.118.248101<ref:2510.24752#pg7>

  7. Lee, C., Richtsmeier, Jj. T. & Kraft, R. H. A Computational Analysis of Bone Formation in the Cranial Vault Using A Coupled Reaction-Diffusion-Strain Model. J Mech Med Biol 17<ref:2510.24752#pg4>

  8. Marghoub, A. et al. Predicting calvarial growth in normal and craniosynostotic mice using a computational approach. J Anat 232<ref:2510.24752#pg4>

  9. Cross, C. et al. A Computational Framework to Predict Calvarial Growth: Optimising Management of Sagittal Craniosynostosis. Front Bioeng Biotechnol 10<ref:2510.24752#pg4>

  10. Malde, O., Libby, J. & Moazen, M. An Overview of Modelling Craniosynostosis Using the Finite Element Method. Mol Syndromol 10<ref:2510.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. More accurately predict skull shape in craniosynostosis cases by incorporating variable mechanical properties that evolve over time, as described in Section 2.4: bone mechanical properties are variable during growth.

  2. Develop a coupled growth model that simultaneously accounts for ICV tissue and skull reconstruction rather than relying solely on applied pressure, as stated in the Discussion section: The coupled growth of brain and skull reconstructions during development in the model allows assessment of their mechanical interactions.

  3. Enhance predictive accuracy by incorporating localized bone formation processes to simulate suture fusion, moving beyond the bulk bone formation approach used: The model did not include localized bone formation processes to simulate suture fusion. Instead, a bulk bone formation approach was utilized.

  4. Improve surgical planning for craniosynostosis treatment by providing insights into optimizing osteotomy location based on stress distributions: The stress contours provide valuable insights for optimizing the osteotomy location in correction surgery.

  5. Enable long-term biomechanical assessments of cranial growth by using a continuous linear growth of brain in a single step, mimicking slow biological growth, which is superior to discrete steps: our study considered a continuous linear growth of brain in a single step, throughout the simulation, that mimics the slow and continuous biological growth.

Abstract

In early years of life, the cranium rapidly changes in size and shape to accommodate brain growth, primarily driven by mechanical stress from brain expansion. Developmental disorders such as premature fusion of sutures in craniosynostosis, disrupts normal growth process, leading to abnormal skull shapes. Thus, understanding the interplay between biomechanical forces, soft tissues, and individual bone plates is crucial for understanding their role in shaping infant skulls. This study develops a mechanically-driven growth model to simulate healthy cranial growth in the first year. The algorithm considers simultaneous and coupled growth of brain, cranial bones, sutures, with volumetric brain expansion as the primary driver, with strain-based feedback governing growth in bone and suture tissues. A bulk bone formation approach accounts for evolving mechanical properties, with elastic moduli of bone and sutures increasing monthly. The model was applied on individual fused sutures and skull dysmorphologies due to craniosynostosis were predicted, and results showed good agreement with clinically observations. Stress at bone-suture interfaces and elevated intracranial pressure under fused sutures highlighted biomechanical impacts due to the disorders. Sensitivity analysis explored how material properties and growth rates affect skull shape. This framework enhances understanding of cranial growth and supports treatment planning for craniosynostosis.

Related papers