A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids

arXiv:2510.21025 · eess.SY, cs.SY · Submitted 2025-10-23 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: I'm Rosa.

Dev: And I'm Dev, here with Taro.

Rosa: We're looking at the paper: "A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids".

Dev: Here's the gist of the paper. The paper proposes a robust Distributed-Averaging Proportional-Integral (DAPI) control scheme incorporating connective stability and invariant ellipsoid techniques to provide frequency and voltage regulation for islanded networks of microgrids, which is important because it addresses the need for robustness against operational and structural perturbations in these systems Problem Context Microgrids (MGs) can operate autonomously in islanded mode, but they face challenges in secondary level frequency and voltage regulation due to the variable nature of Renewable Energy Sources (RES) and loads The operational challenges of NMGs in islanded mode affect robustness and flexibility, necessitating changes to the hierarchical control scheme for stabilization The study focuses on secondary level control in islanded mode because primary level control is typically decentralized based on droop control There is a growing interest in secondary level control of NMGs under different scenarios, topologies, and restrictions Proposed Control Strategy The proposed scheme establishes a robust distributed secondary level control strategy for NMGs that guarantees stability and ensures robustness to operational and structural perturbations This strategy achieves this by utilizing several key concepts: 1.

Rosa: Establishing a modified state-space model representing DAPI-controlled inverters with consensus dynamics as uncertainties as well as added state feedback, giving an additional degree of freedom for ensuring robustness 2.

Dev: Establishing the equilibrium-independent dissipativity condition and utilizes LaSalle’s invariance principle to guarantee stability of DAPI-controlled inverters irrespective of the operating point 3.

Rosa: Applying the concept of connective stability of interconnected systems to NMGs, in order to provide distributed secondary level frequency and voltage control that guarantees stability and ensures robustness to operational and structural perturbations 4.

Title and authors: Dev: So, we’ve looked at the title and authors of "A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids." It’s by Ahmed Saad Al-Karsani, Maryam Khanbaghi, Aleksandar Zeceviˇc, and Aleksandar Zeceviˇc.

Rosa: The core idea here is to move beyond the standard DAPI control which the paper says isn't robust to structural perturbations or operational fluctuations.

Dev: They are proposing a new scheme that uses connective stability along with the invariant ellipsoid technique for disturbance rejection to guarantee robustness across the entire network.

Taro: This suggests they aren't just patching up a control loop; they are building something fundamentally more stable against physical and cyber uncertainties in these islanded microgrids.

Rosa: It’s about making sure that even if the network topology changes or generation fluctuates wildly, the frequency and voltage regulation still works reliably.

The paper's summary: Dev: Let’s look at what the paper summarizes here. Essentially, they are setting up a modified state-space model for DAPI-controlled inverters that includes consensus dynamics as uncertainties and some added state feedback to give the system more room for robustness.

Rosa: They establish an equilibrium independent dissipativity condition and use LaSalle’s invariance principle to guarantee that the DAPI-controlled inverters are stable no matter what the operating point is.

Taro: That sounds like they're proving stability even when things aren't perfectly settled, which is important for real-world operation where you never truly hit a perfect steady state.

Dev: Then they bring in connective stability of interconnected systems to provide that distributed secondary level frequency and voltage control that guarantees stability against those structural perturbations we talked about earlier.

Rosa: And finally, they use the invariant ellipsoid technique to minimize the effects of those disturbances and uncertainties within the microgrid, even when there are non-zero initial conditions present.

The paper's improvements: Taro: So what are these specific improvements they’re making? They’re redefining how they look at connective stability by using terms alpha and beta to bound the DAPI coupling terms, which helps guarantee stability against structural perturbations caused by DER disconnections or reconnections.

Rosa: And on the disturbance rejection side, they use the invariant ellipsoid technique to approximate the reachable set, which accounts for those non-zero initial conditions and defines a bounded Lyapunov function ellipsoid with a bound kappa Y.

Dev: The whole control design is formulated as an LMI optimization problem that combines both of those ideas—connective stability and the invariant ellipsoid technique—to achieve that desired stability and guarantee robustness.

Taro: So it’s not just one trick; it’s a combined approach where the coupling terms are tuned for structural changes, the ellipsoid technique manages disturbances from initial states, and the LMI optimization ties it all together.

Rosa: It seems they've created a unified mathematical framework that handles both types of challenges simultaneously in this robust DAPI control scheme.

Conclusion: Dev: So to wrap up, the paper with the title "A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids" shows that by using connective stability and the invariant ellipsoid technique, you can achieve NMG-wide robustness against fluctuations in generation and load at the DER level.

Rosa: They show that this method guarantees stability even when there are structural uncertainties like topological changes in the network, which is a big deal for islanded microgrids.

Taro: What’s interesting is that they validate this by simulating an NMG model with three MGs and five DERs, testing it against various cyberattack scenarios, and found that the proposed method improves robustness on average in all those tests <ref:2510.21025#pg1,3 MGs and 5 DERs>.

Dev: But they also point out some limitations. They mention that achieving this level of robustness might require a trade-off where slower power sharing is necessary to handle the worst-case disconnection scenarios.

Rosa: And one thing they flag is that there’s a limit to how robust you can make the system because of the capacity limitations for smaller DERs in those networks.

Ahmed Saad Al-Karsani, Maryam Khanbaghi, Aleksandar Zecevic

Santa Clara University

eess.SY, cs.SY

Submitted: 2025-10-23

Updated: 2026-11-14

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 76/100

The gist: The paper proposes a robust Distributed-Averaging Proportional-Integral (DAPI) control scheme incorporating connective stability and invariant ellipsoid techniques to provide frequency and voltage…

Key concepts

Connective Stability
This concept ensures that the interconnected microgrid system remains stable even if some components are disconnected or reconnected. It is achieved by defining coupling terms using strength bounds (alpha and beta), guaranteeing stability regardless of which specific connection structure is active.
Invariant Ellipsoid Technique
This mathematical tool helps reject disturbances and uncertainties within the microgrid. By defining a bounded ellipsoid around the system's trajectory, it constrains the possible paths of the system, ensuring that even with non-zero starting conditions or external disturbances, the system remains within a predictable and stable region.
LMI Optimization
Linear Matrix Inequalities (LMIs) are used to design the control parameters. The LMI formulation combines connective stability and the invariant ellipsoid method into a single optimization problem, allowing for the calculation of state feedback gains (K) that guarantee both stability and robustness against uncertainties.
Interaction Variables
These variables are introduced to enhance energy management beyond secondary control. They allow researchers to quantify the dynamic reserves each microgrid has available across primary, secondary, and tertiary control levels, improving overall system energy handling.

Terminology

Summary

The paper proposes a robust Distributed-Averaging Proportional-Integral (DAPI) control scheme incorporating connective stability and invariant ellipsoid techniques to provide frequency and voltage regulation for islanded networks of microgrids, which is important because it addresses the need for robustness against operational and structural perturbations in these systems

Problem Context

Microgrids (MGs) can operate autonomously in islanded mode, but they face challenges in secondary level frequency and voltage regulation due to the variable nature of Renewable Energy Sources (RES) and loads The operational challenges of NMGs in islanded mode affect robustness and flexibility, necessitating changes to the hierarchical control scheme for stabilization The study focuses on secondary level control in islanded mode because primary level control is typically decentralized based on droop control There is a growing interest in secondary level control of NMGs under different scenarios, topologies, and restrictions

Proposed Control Strategy

The proposed scheme establishes a robust distributed secondary level control strategy for NMGs that guarantees stability and ensures robustness to operational and structural perturbations This strategy achieves this by utilizing several key concepts:

  1. Establishing a modified state-space model representing DAPI-controlled inverters with consensus dynamics as uncertainties as well as added state feedback, giving an additional degree of freedom for ensuring robustness

  2. Establishing the equilibrium-independent dissipativity condition and utilizes LaSalle’s invariance principle to guarantee stability of DAPI-controlled inverters irrespective of the operating point

  3. Applying the concept of connective stability of interconnected systems to NMGs, in order to provide distributed secondary level frequency and voltage control that guarantees stability and ensures robustness to operational and structural perturbations

  4. Using the invariant ellipsoid technique to minimize the effects of the aforementioned disturbances and uncertainties within the NMG, despite non-zero initial conditions

  5. Formulating the control design as an LMI optimization problem, which combines the aforementioned uses of connective stability and the invariant ellipsoid technique to achieve the desired stability and guarantee robustness

System Modeling

The DER block diagram includes an energy storage system, an inverter (which is droop-controlled), and an LCL filter The frequency dynamics are governed by equations derived from LPF dynamics, leading to the pair of equations in (4a) and (4b) The secondary level control terms uω,i(t) and uV,i(t) are added to compensate for steady-state errors caused by primary level control The DAPI frequency control is defined by the distributed-averaging consensus dynamics in equation (8), and the voltage DAPI controller is defined in equation (9) The state-space model of the DAPI-controlled i th DER can be represented in general form as given by equation (12)

Robustness Formulation

Connective stability is established by redefining DAPI coupling terms aij and bij using connective strength bounding terms α and β, which allows for defining the N × N fundamental interconnection matrix E¯ The system is said to be connectively stable if it is stable in the sense of Lyapunov for all E that are generated by E¯ The LMI-based strategy treats the adjacency coupling term as an additive perturbation, setting hD(x) = ∆ADx and gD(d) = ∆EDd The invariant ellipsoid technique is used to approximate the reachable set R while accounting for non-zero initial conditions, defining a bounded Lyapunov function ellipsoid with bound κY as in equation (31) The LMI optimization problem is formulated to minimize the cost function c1γα + c2γβ + c3κL subject to constraints on Y > 0 and other related inequalities

Simulation Validation

The proposed scheme was validated by simulating an NMG model consisting of 3 MGs and 5 DERs using MATLAB®/Simulink®, testing the robustness against cyberattack scenarios Three scenarios were simulated to emulate cyber-physical disruptions, including Confidentiality Islanding (Scenario 1), Physical Islanding (Scenario 2), and Cyber Islanding/Denial of Service (Scenario 3) The analysis showed that applying the proposed method improves robustness and resilience on average in all considered scenarios, as indicated by Table II and Table III Specifically, the loss metric lossRo reflects robustness with respect to disruptions The results suggest that slower power sharing may be a necessary trade-off in the pursuit of achieving robust control that is capable of handling worst-case scenarios of disconnections The paper concludes by noting that there is a limit to the degree of robustness achievable due to capacity limitations for small-scale DERs

Future Work

Future work will focus on developing a hierarchical control framework for regulating the injected energy resulting from primary level and secondary level control, proposing to utilize the concept of interaction variables introduced in [16] This will allow quantifying the dynamic reserves of each MG on the primary, secondary and tertiary levels The paper also notes that parameter κY is manually tuned to minimize the norm of the Lyapunov function matrix P, which in turn minimizes the invariant ellipsoid for enhanced robustness in the form of disturbance rejection The final objective is to compute state feedback control K = LY −1 if a feasible solution is found for Problem 1

Acknowledgment

This work was partially funded by the U.S. National Science Foundation under Grant ECCS-2236843 and the Santa Clara University School of Engineering Dean’s Excellence Packard Fellowship The references listed provide extensive background on distributed control, stability theory, and microgrid applications The appendix provides the proof of inequality (26) derived from the state-space model Table I details the relevant DER parameters for the NMG model used in simulation The simulation results are presented in Figures 4 through 11, comparing base DAPI and proposed schemes under various attack scenarios The paper concludes with a summary of its findings and directions for future research

References

[1] B. Chen, J. Wang, X. Lu, C. Chen and S. Zhao, “Networked Microgrids for Grid Resilience, Robustness, and Efficiency: A Review,” IEEE Transactions on Smart Grid, vol. p. 0

Where the paper says it

NMGs can operate in grid-connected or islanded modes, safely integrating RES into a large-scale power grid with scalable and resilient operation, especially during extreme scenarios such as blackouts. Hence, NMGs may be considered as a potential catalyst for added robustness, resilience and efficiency [1].

12, no. 1, pp. 18-32

[4] G. Ahmad, A. Hassan, A. Islam, M. Shafiullah, M. A. Abido and M. Al-Dhaifallah, “Distributed Control Strategies for Microgrids: A Critical Review of Technologies and Challenges,” IEEE Access, vol. p. 0

Where the paper says it

1 A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids Ahmed Saad Al-Karsani, Student Member, IEEE, Maryam Khanbaghi, Senior Member, IEEE, Aleksandar Zecevi ˇ c,´ Senior Member, IEEE Abstract—The transition towards clean energy and the introduction of Distributed Energy Resources (DERs) are giving rise to the emergence of Microgrids (MGs) and Networks of MGs (NMGs). MGs and NMGs can operate autonomously in islanded mode.

13, pp. 60702-60719

[8] UNIFI Consortium, “UNIFI Specifications for Grid-Forming InverterBased Resources - Version 2,” UNIFI-2024-2-1, March 2024

[13] R. Zamora and A. p. 1

Where the paper says it

Their cooperative control method was a step towards efficient real-time control that partially recreates the performance of central controllers, such as Automatic Generation Control (AGC), in the aggregate. In terms of distributed secondary level control within NMGs, Zamora and Srivastava [13] propose a novel multi-layer architecture for frequency and voltage control that works in a wide range of operating points, using modified droop control.

K. Srivastava, “Multi-Layer Architecture for Voltage and Frequency Control in Networked Microgrids,” IEEE Transactions on Smart Grid, vol. p. 1
Where the paper says it

In terms of distributed secondary level control within NMGs, Zamora and Srivastava [13] propose a novel multi-layer architecture for frequency and voltage control that works in a wide range of operating points, using modified droop control. However, they only considered grid-connected NMGs.

9, no. 3, pp. 2076-2085

[16] T. Huang, D. Wu and M. Ilic, “Cyber-Resilient Automatic Generation ´ Control for Systems of AC Microgrids,” IEEE Transactions on Smart Grid, vol. p. 0

Where the paper says it

One school of thought proposes further leveraging the advantages of MGs by forming Networks of MGs (NMGs), an agglomeration of cyber-physically linked MGs that operate in a coordinated manner. This concept falls under the IEEE 2030 standards definition of smart grid interoperability [2].

15, no. 1, pp. 886-898

[22] D. D. Siljak, “Decentralized Control of Complex Systems,” Dover Publications, North Holland, N. p. 1

Where the paper says it

[21] with H∞ robust control addresses cyber-physical disruptions resulting in secondary level distributed control - but only on the communication side, without necessarily addressing physical disruptions. To achieve stability guarantees against both operational and structural perturbations, Siljak introduced the notion of ˇ connective stability [22], which ensures the stability of complex systems such as NMGs for all possible topologies or interconnections.

Y., 2012

[37] J. P. LaSalle and S. p. 1

Where the paper says it

The contribution of this work is to develop a robust distributed secondary level control strategy for NMGs that: 1) Establishes a modified state-space model representing DAPI-controlled inverters with consensus dynamics as uncertainties as well as added state feedback, giving an additional degree of freedom for ensuring robustness. 2) Establishes the equilibrium-independent dissipativity condition and utilizes LaSalle’s invariance principle to guarantee stability of DAPI-controlled inverters irrespective of the operating point.

Lefschetz, “Stability by Lyapunov’s Direct Method with Applications,” Academic Press, New York, 1961

[38] A. Colotti and A. Goldsztejn, “Practical stability and attractors of systems with bounded perturbations,” 2022 IEEE 61st Conference on Decision and Control (CDC), Cancun, Mexico, pp. p. 1

Where the paper says it

[21] with H∞ robust control addresses cyber-physical disruptions resulting in secondary level distributed control - but only on the communication side, without necessarily addressing physical disruptions. To achieve stability guarantees against both operational and structural perturbations, Siljak introduced the notion of ˇ connective stability [22], which ensures the stability of complex systems such as NMGs for all possible topologies or interconnections.

5129-5134

[39] E. D. Sontag and Yuan Wang, “New characterizations of input-to-state stability,” IEEE Transactions on Automatic Control, vol. p. 5

Where the paper says it

To limit the sensitivity of the system states to the magnitude of forced responses, we can invoke Input-to-State Stability (ISS) theory and its dissipation property. For state-space models, Sontag [39], [40] introduced the concept of ISS and concluded that it implies two things: (a) the unforced system must be asymptotically stable and (b) the state trajectory of the forced system must asymptotically approach a region around the origin.

41, no. 9, pp. 1283-1294

[40] E. D. Sontag, “Input to State Stability: Basic Concepts and Results,” in: P. p. 5

Where the paper says it

To limit the sensitivity of the system states to the magnitude of forced responses, we can invoke Input-to-State Stability (ISS) theory and its dissipation property. For state-space models, Sontag [39], [40] introduced the concept of ISS and concluded that it implies two things: (a) the unforced system must be asymptotically stable and (b) the state trajectory of the forced system must asymptotically approach a region around the origin.

Nistri and G. Stefani, ”Nonlinear and Optimal Control Theory,” Lecture Notes in Mathematics, vol 1932, Springer, Berlin, Heidelberg, 2008

[42] B.T. Polyak, P.S. Shcherbakov and M.V. Topunov, “Invariant Ellipsoids Approach to Robust Rejection of Persistent Disturbances,” IFAC Proceedings Volumes, vol. p. 0

Where the paper says it

To address this, we propose a robust DAPI frequency and voltage control scheme that ensures robustness using the concept of connective stability, along with the invariant ellipsoid technique for disturbance rejection. Simulation of an NMG model in MATLAB® /Simulink® consisting of 3 MGs and 5 DERs validates the effectiveness of the proposed method, and demonstrates that it can successfully mitigate the effects of major disturbances such as cyberattacks.

41, issue 2, pp. p. 1
Where the paper says it

Their control scheme is akin to the conventional grid scheme of separate and slower timescales. An issue in real-time distributed control such as the DAPI scheme is the lack of constraints on some consensus dynamics.

3976-3981

[43] B. T. Polyak, A. V. Nazin, M. V. Topunov and S. A. Nazin, “Rejection of Bounded Disturbances via Invariant Ellipsoids Technique,” Proceedings of the 45th IEEE Conference on Decision and Control, San Diego, CA, USA, pp. p. 0

Where the paper says it

To address this, we propose a robust DAPI frequency and voltage control scheme that ensures robustness using the concept of connective stability, along with the invariant ellipsoid technique for disturbance rejection. Simulation of an NMG model in MATLAB® /Simulink® consisting of 3 MGs and 5 DERs validates the effectiveness of the proposed method, and demonstrates that it can successfully mitigate the effects of major disturbances such as cyberattacks.

1429-1434

[6] Q. Zhou, M. Shahidehpour, A. Paaso, S. Bahramirad, A. Alabdulwahab and A. Abusorrah, “Distributed Control and Communication Strategies in Networked Microgrids,” IEEE Communications Surveys & Tutorials, vol. p. 0

Where the paper says it

1 A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids Ahmed Saad Al-Karsani, Student Member, IEEE, Maryam Khanbaghi, Senior Member, IEEE, Aleksandar Zecevi ˇ c,´ Senior Member, IEEE Abstract—The transition towards clean energy and the introduction of Distributed Energy Resources (DERs) are giving rise to the emergence of Microgrids (MGs) and Networks of MGs (NMGs). MGs and NMGs can operate autonomously in islanded mode.

22, no. 4, pp. 2586-2633

[12] J. W. Simpson-Porco, Q. p. 1

Where the paper says it

A popular consensus-based approach at the secondary level is Distributed-Averaging Proportional-Integral (DAPI) control of DERs within MGs. Simpson-Porco et al.

Shafiee, F. Dorfler, J. p. 1
Where the paper says it

Before addressing secondary level control within NMGs, it is helpful to describe some of the spatiotemporal challenges facing the hierarchical control of MGs. Regarding the nature of separate timescales in hierarchical control, Dorfler ¨ et al.

C. Vasquez, J. M. ¨Guerrero and F. Bullo, “Secondary Frequency and Voltage Control of Islanded Microgrids via Distributed Averaging,” IEEE Transactions on Industrial Electronics, vol 62, no 11, pp 7025-7038

[29] J. Zhang, Y. Men, L. Ding and X. Lu, “Secondary Frequency and Voltage Regulation for Inverter-Based Microgrids: A Sparsity-Promoting DAPI Control Approach,” IEEE Transactions on Control Systems Technology, vol 32, no 4, pp 1512-1519

[30] F. Guo, C. Wen, J. Mao and Y. -D. Song, “Distributed Secondary Voltage and Frequency Restoration Control of Droop-Controlled Inverter-Based Microgrids,” IEEE Transactions on Industrial Electronics, vol 62, no 7, pp 4355-4364

[31] A. S. Al-Karsani, M. p. 0

Where the paper says it

1 A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids Ahmed Saad Al-Karsani, Student Member, IEEE, Maryam Khanbaghi, Senior Member, IEEE, Aleksandar Zecevi ˇ c,´ Senior Member, IEEE Abstract—The transition towards clean energy and the introduction of Distributed Energy Resources (DERs) are giving rise to the emergence of Microgrids (MGs) and Networks of MGs (NMGs). MGs and NMGs can operate autonomously in islanded mode.

Khanbaghi and M. p. 0
Where the paper says it

1 A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids Ahmed Saad Al-Karsani, Student Member, IEEE, Maryam Khanbaghi, Senior Member, IEEE, Aleksandar Zecevi ˇ c,´ Senior Member, IEEE Abstract—The transition towards clean energy and the introduction of Distributed Energy Resources (DERs) are giving rise to the emergence of Microgrids (MGs) and Networks of MGs (NMGs). MGs and NMGs can operate autonomously in islanded mode.

Zarghami, “Decentralized Frequency Control of Microgrids with Constraints: An LMI Approach,” 2024 56th North American Power Symposium (NAPS), El Paso, TX, USA, pp 1-6

[32] Y. Khayat et al., “On the Secondary Control Architectures of AC Microgrids: An Overview,” IEEE Transactions on Power Electronics, vol 35, no 6, pp 6482-6500

[33] A. Bidram, F. L. Lewis and A. Davoudi, “Distributed Control Systems for Small-Scale Power Networks: Using Multiagent Cooperative Control Theory,” IEEE Control Systems Magazine, vol 34, no 6, pp 56-77

[34] J. Schiffer, T. Seel, J. Raisch and T. Sezi, “Voltage Stability and Reactive Power Sharing in Inverter-Based Microgrids With Consensus-Based Distributed Voltage Control,” IEEE Transactions on Control Systems Technology, vol 24, no 1, pp 96-109

[35] M. Mesbahi and M. Egerstedt, “Graph Theoretic Methods in Multiagent Networks,” Princeton University Press, 2010

[36] B. Abdolmaleki, J. W. Simpson-Porco and G. p. 1

Where the paper says it

A popular consensus-based approach at the secondary level is Distributed-Averaging Proportional-Integral (DAPI) control of DERs within MGs. Simpson-Porco et al.

Bergna-Diaz, “Distributed Optimization for Reactive Power Sharing and Stability of Inverter-Based Resources Under Voltage Limits,” IEEE Transactions on Smart Grid, vol 15, no 2, pp 1289-1303

[47] S. Boyd, L. ElGhaoui, E. Feron and V. Balakrishnan, “Linear Matrix Inequalities in System and Control Theory,” vol 15, Philadelphia, PA, USA, Studies in Applied Mathematics, 1994

[48] A. I. Zecevi ˇ c and D. p. 0

Where the paper says it

1 A Connectively Stable and Robust DAPI Control Scheme for Islanded Networks of Microgrids Ahmed Saad Al-Karsani, Student Member, IEEE, Maryam Khanbaghi, Senior Member, IEEE, Aleksandar Zecevi ˇ c,´ Senior Member, IEEE Abstract—The transition towards clean energy and the introduction of Distributed Energy Resources (DERs) are giving rise to the emergence of Microgrids (MGs) and Networks of MGs (NMGs). MGs and NMGs can operate autonomously in islanded mode.

D. ´ Siljak, “Control of Complex Systems: Structural ˇ Constraints and Uncertainty,” Springer, New York, NY, 2012

[51] Z. Li, M. Shahidehpour, F. Aminifar, A. Alabdulwahab and Y. Al-Turki, “Networked Microgrids for Enhancing the Power System Resilience,” Proceedings of the IEEE, vol 105, no 7, pp 1289-1310

[52] A. Paudel, P. Mandal and G. Ravikumar, “Resilience Assessment of Cyber-Attacks on Distributed Secondary Control in Microgrid,” 2024 56th North American Power Symposium (NAPS), El Paso, TX, USA, pp 1-6

[53] A. Bidram, B. Poudel, L. Damodaran, R. Fierro and J. M. Guerrero, “Resilient and Cybersecure Distributed Control of Inverter-Based Islanded Microgrids,” IEEE Transactions on Industrial Informatics, vol 16, no 6, pp 3881-3894

[54] X. Zhan, “Matrix Inequalities,” Lecture Notes in Mathematics, vol. p. 7

Where the paper says it

We will continue to do so throughout this section. To ensure that the bounds on V, d, ∆A, ∆E are satisfied, we reformulate (35) as follows: FV˙ = V˙(x) ≤ 0, ∀ FV = −x T P x ≤ −1 (36) subject to: Fd = d T Sd¯ ≤ 1 (37a) F∆A = x T ∆A T ∆Ax − α 2x T HT Hx ≤ 0 (37b) F∆E = d T ∆E T ∆Ed − β 2 d T G T Gd ≤ 0 (37c) where FV˙ and FV are Lyapunov conditions and Fd, F∆A and F∆E correspond to inequalities (18), (19a) and (19b) respectively.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Robustness to structural perturbations in islanded networks can be guaranteed by tuning DAPI coupling terms aij and bij using parameters alpha and beta to ensure robustness with respect to structural perturbations resulting from the disconnection or reconnection of DERs.

  2. Disturbance rejection is achieved using the invariant ellipsoid technique by tuning the Lyapunov function ellipsoid bound, which constrains the admissible system trajectories of the perturbed system.

  3. The proposed scheme can handle cyber-physical disruptions by treating adjacency coupling term as an additive perturbation in an LMI based strategy to compute state feedback gain K and connective strength bounds alpha and beta.

  4. The improved AI system can maintain consensus and power sharing by ensuring that the Lyapunov function in equation 23 satisfies the dissipativity condition defined by inequality 26, which ensures stability regardless of the equilibrium point x star in D.

  5. By utilizing interaction variables, the AI system can quantify the dynamic reserves of each MG on primary, secondary, and tertiary levels to improve energy management beyond secondary level control.

Abstract

The transition towards clean energy and the introduction of Distributed Energy Resources (DERs) are giving rise to the emergence of Microgrids (MGs) and Networks of MGs (NMGs). MGs and NMGs can operate autonomously in islanded mode. However, they face challenges in terms of secondary level frequency and voltage regulation, due to the variable nature of Renewable Energy Sources (RES) and loads. Distributed-Averaging Proportional-Integral (DAPI) control has been proposed in the literature for distributed frequency and voltage control of droop-controlled DERs, but it might not guarantee robustness to cyber-physical disturbances. To address this, we propose a robust DAPI frequency and voltage control scheme that ensures robustness using the concept of connective stability, along with the invariant ellipsoid technique for disturbance rejection. The proposed scheme adds additional degrees of freedom to determine the strength of distributed control, providing an option for more robust action. Simulation of an NMG model in MATLAB/Simulink consisting of 3 MGs and 5 DERs shows that the proposed scheme minimizes frequency and voltage deviations during cyber-physical disturbance events compared to the baseline, dissipativity-based and H-infinity-based techniques.

Related papers