Integrated Localization, Mapping, and Communication through VCSEL-Based Light-emitting RIS (LeRIS)

arXiv:2510.08071 · cs.IT, math.IT · Submitted 2025-10-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Computer Science. The day in computer science: software, systems and theory on arXiv.

Tom: We're looking at the paper: "Integrated Localization, Mapping, and Communication through VCSEL-Based Light-emitting RIS (LeRIS)".

Jane: Here's the gist of the paper. Light-emitting reconfigurable intelligent surfaces (LeRISs) have recently emerged as a promising solution for providing the spatial awareness required for reliable millimeterwave (mmWave) communication in programmable wireless environments (PWEs).

Tom: Specifically, the narrow Gaussian beams and multimode operation of VCSELs are exploited to derive closed-form schemes for the joint recovery of the user position and orientation from received signal strength measurements Furthermore, the proposed framework achieves cm-level localization accuracy, reliable obstacle detection, and substantial spectral-efficiency and minimum-user-rate gains.

Jane: System Architecture Overview The paper introduces a VCSELbased LeRIS architecture in which VCSELs are integrated along the perimeter of each RIS panel and operate as structured optical anchors for user localization and environmental sensing.

Tom: The system employs four LeRISs, each deployed at the center of a distinct wall to overcome the limitations of direct Line-of-Sight (LoS) transmission from an access point (AP) to users (UEs).

Paper summary: Jane: So, wrapping up this discussion on "Integrated Localization, Mapping, and Communication through VCSEL-Based Light-emitting RIS", the authors are showing how to use these compact optical sources to extend LeRIS operation beyond localization and give the spatial awareness required for resilient and adaptive PWEs <ref:2510.08071#pg3>.

Lu: What this means in simpler terms is that by integrating VCSELs directly into the RIS panels, they create a single system that handles finding where a user is, figuring out what's blocking the path, and deciding how to route data simultaneously <ref:2510.08071#pg3>.

Meng: For someone deploying this in a real environment, it means you don't need separate, bulky LiDAR units or complex setups just to get that spatial understanding for your communication network <ref:2510.08071#pg2>. It simplifies the hardware integration significantly.

Tom: The authors are proving that this integrated approach doesn't just work theoretically; it actually shows how route diversity helps mitigate blockage effects and improves both spectral efficiency and the minimum user rate in their simulations <ref:2510.08071#pg4>.

Jane: It’s about using the inherent properties of VCSELs, like their Gaussian beam profile, to derive these closed-form solutions for position and orientation estimation <ref:2510.08071#pg3>. The math supports that five VCSELs are sufficient for a unique solution based on signal strength measurements <ref:2510.08071#pg3>.

Lu: And they establish the position error bound, or PEB, which is calculated as the square root of the trace of the inverse of a Fisher information matrix derived from all visible VCSEL observations <ref:2510.08071#pg2>, giving a concrete characterization of how accurate their localization is <ref:2510.08071#pg3>.

Meng: The limitation they mention is that the complexity of their solution depends on how many measurements you need, which ties back to needing those five or three VCSELs for the position and orientation recovery <ref:2510.08071#pg3>.

Tom: So, if you're listening who just got off a long drive, this paper suggests that by using these specific light emitters on a surface, you can achieve centimeter accuracy for positioning while simultaneously managing the network traffic efficiently <ref:2510.08071#pg3>.

Conclusion: Tom: So we're wrapping up on this paper about what they call Integrated Localization, Mapping, and Communication through VCSEL-Based Light-emitting RIS. Basically, they’ve shown how you can put these tiny light emitters directly onto the reflective surface of a communication panel to do three things at once.

Jane: That’s right. We talked about how they use those Gaussian beams from the VCSELs to figure out where a user is and what's blocking their signal, and now we’re looking at what this all means in practice. It seems like the authors are really focusing on how these compact optical sources extend the reach of RIS beyond just finding a location.

Lu: I think that’s the core idea. They aren't just using it for localization; they're using it to create a spatial awareness needed for these complex, programmable wireless environments we see today. It’s about giving the system context on its own.

Meng: For me, what really stands out is how they tackle that route diversity issue in their simulations. They show that having multiple RIS panels helps improve spectral efficiency because you get more reflective paths available to serve the user at once. That’s a real practical gain for deployment costs and performance.

Tom: Exactly. They found that involving more RIS panels isn't just about getting better localization; it actually expands the spatial coverage of all those VCSEL observations, which keeps the position and orientation recovery reliable even if the user moves a bit relative to their device. That’s a neat trade-off they’re handling well.

Jane: And they showed that this route diversity helps mitigate those blockage effects we always worry about in indoor wireless links. It turns potential outages into something less of an issue by having multiple paths available. It’s a big step toward making these systems more robust for real-world use, you know?

Lu: Yeah, the math behind it confirms that this cooperative approach—where different VCSEL panels work together—actually improves the minimum user rate across all users in their timeresource allocation problem. It’s not just about one user getting a good signal; it’s about making sure everyone gets a fair deal.

Meng: From my side, the cost to run this kind of complex coordination needs to be manageable. The authors are showing that this framework gives them a solid way to allocate time and resources efficiently based on what they've already mapped and sensed, which should translate into less wasted energy in the long run.

Tom: So, if we boil it down, the authors have successfully integrated localization and sensing into the RIS hardware using these light sources. They proved that this integrated approach leads to better performance—higher spectral efficiency and more reliable minimum user rates—by managing path diversity intelligently.

Jane: It really establishes a blueprint for how compact optical sources can be used to give wireless systems the spatial understanding they need to work reliably in tricky indoor settings. But we still have a lot of questions about how scalable this is when you move from simulation to massive, real-world deployments. (Sound of upbeat, modern radio music swelling slightly)

James Watt School of Engineering, University of Glasgow · Aristotle University of Thessaloniki Department of Electrical and Computer Engineering, Technical University of Chania, Foundation for Research and Technology Hellas

cs.IT, math.IT

Submitted: 2025-10-09

Updated: 2026-11-12

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 78/100

The gist: Light-emitting reconfigurable intelligent surfaces (LeRISs) have recently emerged as a promising solution for providing the spatial awareness required for reliable millimeterwave (mmWave)…

Key concepts

VCSELs
Vertical Cavity Surface Emitting Lasers are used as structured optical anchors on the RIS panels. They emit narrow Gaussian beams that are crucial for estimating user position and orientation through signal attenuation measurements.
LeRIS Architecture
This system integrates VCSELs along the perimeter of multiple RIS panels, which are placed at different wall centers. These LeRIS units act as structured optical emitters to enable spatially structured illumination for indoor sensing and localization.
Closed-form Localization
A mathematical method is derived that uses Received Signal Strength (RSS) measurements from the VCSELs to estimate a user's 3D position and orientation directly. This method relies on the geometric information provided by how the optical beam intensity attenuates with distance.
Time-Division Multiple Access (TDMA)
The system uses a TDMA protocol where users simultaneously estimate their 3D positions by receiving optical signals emitted by the VCSELs, allowing for coordinated sensing and communication.

Terminology

Summary

Light-emitting reconfigurable intelligent surfaces (LeRISs) have recently emerged as a promising solution for providing the spatial awareness required for reliable millimeterwave (mmWave) communication in programmable wireless environments (PWEs). p. 0 Specifically, the narrow Gaussian beams and multimode operation of VCSELs are exploited to derive closed-form schemes for the joint recovery of the user position and orientation from received signal strength measurements Furthermore, the proposed framework achieves cm-level localization accuracy, reliable obstacle detection, and substantial spectral-efficiency and minimum-user-rate gains. p. 0

System Architecture Overview

The paper introduces a VCSELbased LeRIS architecture in which VCSELs are integrated along the perimeter of each RIS panel and operate as structured optical anchors for user localization and environmental sensing. The system employs four LeRISs, each deployed at the center of a distinct wall to overcome the limitations of direct Line-of-Sight (LoS) transmission from an access point (AP) to users (UEs). p. 2 Each LeRIS integrates a programmable array of passive reflecting elements along with optical emitters designed to enable spatially structured illumination for indoor localization and sensing. p. 2 The system adopts a time-division multiple access (TDMA) protocol where UEs simultaneously estimate their three-dimensional position by receiving the optical signals emitted by VCSELs. p. 2

Localization Mechanism

A closed-form localization method is derived that exploits the spatial intensity profile of the VCSEL beams to estimate each UE position. The framework relies on RSS measurements from the VCSELs, where the attenuation of optical beam intensity with distance provides geometric information for localization. p. 4 Lemma 1 establishes that five VCSELs are sufficient to guarantee a unique solution for the joint recovery of the UE position and orientation based on RSS values. p. 5 Proposition 1 further states that the UE position and orientation can be uniquely determined from three dual-mode VCSELs in the absence of noise. p. 6

Environmental Mapping and Sensing

A sensing scheme is developed that employs the same VCSEL infrastructure to detect obstacles and assess the feasibility of LoS links between the UEs and the deployed LeRISs. Reflected-signal time-of-arrival measurements are associated with known beam directions to identify obstacle locations and determine whether candidate links are unobstructed. p. 2 Proposition 3 establishes the condition under which a LoS segment is considered obstructed based on the signs of consecutive reflection points. p. 7

Communication and Routing

The system formulates a timeresource allocation problem to maximize the minimum achievable rate across all UEs, promoting fairness. The optimal route is selected by maximizing the spectral efficiency in (20), which reflects the balance between accumulated path loss and multiplicative beamforming gain. p. 8 The resulting time allocation directly reflects the localization, mapping, and routing outcomes of the proposed framework. p. 8

Performance Evaluation

Monte Carlo simulations demonstrate that involving more LeRIS panels improves spectral efficiency because their joint participation expands the spatial coverage of VCSELs and provides multiple reflective routes for serving the UE. The cooperation of multiple VCSELbased LeRIS panels not only improves localization accuracy but also preserves the VCSEL coverage required for reliable position and orientation recovery independently of the UE orientation. p. 9 Consequently, Fig. p. 0 7 demonstrates that while in the multi-user case with K = 5, the minimum rate is concentrated between 5 and 10 bps/Hz, with L = 4 showing a shift to the right, demonstrating that route diversity mitigates outages and improves reliability. p. 2

Conclusion

The proposed framework establishes how compact optical sources can extend LeRIS operation beyond localization and provide the spatial awareness required for resilient and adaptive PWEs. p. 2 The resulting route diversity was shown to mitigate blockage effects and improve both spectral efficiency and the minimum user rate. p. 2 The proposed framework establishes how compact optical sources can extend LeRIS operation beyond localization and provide the spatial awareness required for resilient and adaptive PWEs.

Appendix A

The minimization problem in (29) is solved using the Levenberg–Marquardt (LM) method, whose objective is to iteratively refine the position estimate r. The LM update step is obtained as the solution of (G⊤J GJ + λdI3) ∆r = −G⊤J e. p. 6

Appendix B

The Fisher information matrix associated with the complete UE state is derived by combining the contributions from all visible VCSEL observations. The position error bound (PEB) is established as the square root of the trace of the inverse of this matrix. p. 7

The proof for Proposition 2 shows that the Fisher information contributed by each observation is additive due to statistical independence. The position covariance satisfies Cov (brk) ⪰ hÄ J(L) kä-1i1:3,1:3. p. 7

The proof for Proposition 2 concludes that the position error bound is given by PEB(L) k = tr ÅhÄ J(L) kä-1i1:3,1:3ã. The final result establishes q Eî∥brk − rk∥22ó ≥ tr ÅhÄ J(L) kä-1i1:3,1:3ã= PEB(L) k. p. 7

The proof for Proposition 2 shows that the Fisher information contributed by each observation is additive due to statistical independence. The position covariance satisfies Cov (brk) ⪰ hÄ J(L) kä-1i1:3,1:3ã. p. 7

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can perform joint localization, mapping, and communication in programmable wireless environments by integrating VCSEL-based Light-emitting RIS (LeRIS). This system can achieve cm-level localization accuracy by exploiting closed-form schemes derived from the Gaussian beam profile and multimode operation of VCSELs.

  2. Improved AI system can enable blockage resilient LeRIS routing by employing reflected signal time-of-arrival measurements to identify obstructed links. The paper shows that reflected-signal time-of-arrival measurements are employed to identify obstructed links and enable blockage resilient LeRIS routing.

  3. Improved AI system can dynamically adapt its signal routing strategy in real time based on environmental dynamics and propagation constraints. This is achieved by selecting a route that maximizes the endtoend spectral efficiency, which is expressed as Rk = max pi Rpi,k where Rpi,k is the spectral efficiency of a candidate route pi.

  4. Improved AI system can ensure fair access among multiple users in a Time Division Multiple Access (TDMA) framework by solving a max min optimization problem. This optimization maximizes the minimum achievable rate "max tau k Rmin s.t. tau k Rk >= Rmin, ∀k ∈ K".

  5. Improved AI system can provide sensing capabilities for environmental mapping by using the same VCSEL infrastructure that enables localization to detect obstacles and assess link feasibility. This is achieved because the same VCSEL-based infrastructure that enables closed-form localization also extends the functionality of PWEs by providing sensing capabilities.

Related papers