geko: A tool for modelling galaxy kinematics and morphology in JWST/NIRCam slitless spectroscopic observations
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.
Vera: I'm Vera.
Jocelyn: And I'm Jocelyn, here with Subrahmanyan.
Vera: We're looking at the paper: "geko: A tool for modelling galaxy kinematics and morphology in JWST/NIRCam slitless spectroscopic observations".
Jocelyn: Here's the gist of the paper. Wide-field slitless spectroscopy (WFSS) is a powerful tool for studying large samples of galaxies across cosmic times The Grism Emission-line Kinematics tOol (geko), a Python package that forward-models NIRCam grism observations and infers emission-line morphologies and kinematics within a Bayesian framework, recovers parameters such as effective radius, velocity dispersion, rotational velocity, rotational support, and dynamical mass Tool Development geko combines forward-modelling of the grism instrument with a Bayesian inference framework to infer the model parameters of the galaxy The tool leverages optimized gradient-based sampling algorithms via jax/numpyro for efficient inference, allowing a galaxy to be fit in approximately twenty minutes on GPUs The framework accounts for instrumental effects by convolving the 3D model cube with the PSF and LSF kernels before projecting it onto the grism detector plane Model Components The tool combines forward-modelling of the grism instrument with a Bayesian inference framework to infer the model parameters of the galaxy The morphological modeling uses a Sérsic profile as a base model for surface brightness, requiring seven free parameters including inclination, position angle, effective radius, and Sérsic index Kinematic modeling utilizes an idealized thin disk model where the rotational velocity is described by an arctangent function and the velocity dispersion is modeled as a constant isotropic value across the disk Inference Methodology The inference process uses numpyro, which is based on jax, allowing for automatic differentiation and just-in-time (JIT) compilation to boost performance The likelihood function is Gaussian, defined by the comparison between the 2D model spectrum and the observed grism map The sampling employs The No-U-Turn-Sampler (NUTS), an adaptation of Hamiltonian Monte Carlo (HMC), which is optimized for GPUs to sample posterior distributions efficiently Validation and Application Performance is validated using extensive mock data spanning position angle, S/N, and morphology to quantify where degeneracies limit recovery Applications are demonstrated on real FRESCO Halpha emitters at z ≈ 4 − 6, recovering both rotation- and dispersion-dominated systems The tool opens the door to statistical studies of galaxy dynamics in the early Universe Future Directions Planned developments include implementing morphological fitting directly within the code, incorporating multiple component fitting for mergers and clumpy systems, and implementing joint fitting of emission lines using both dispersion directions (R and C) to recover intrinsic maps with more flexibility This methodology aims to reconstruct a spatially resolved emission line map without assuming a Sérsic light distribution geko fits the emission line morphology and kinematics using parametric models, namely a Sérsic profile and an arctangent velocity curve, which are projected onto the sky based on the inclination and position angle of the galaxy The tool opens the door to statistical analyses of galaxy kinematics at high redshift, ushering in the study of early galaxy formation through a dynamical lens Acknowledgements We thank Benjamin D.
Vera: Johnson, Fengwu Sun and Eiichi Egami for technical insights which helped in the development of the code We thank Hannah Übler, Emily Wisnioski, William McClymont and the JADES collaboration for helpful discussions ALD thanks the University of Cambridge Harding Distinguished Postgraduate Scholars Programme and Technology Facilities Council (STFC) Center for Doctoral Training (CDT) in Data intensive science at the University of Cambridge (STFC grant number 2742605) for a PhD studentship ALD and ST acknowledge support by the Royal Society Research Grant G125142 References Arribas S., et al., 2024, A&A, 688, A146 Bingham E., et al., 2018, arXiv e-prints, p.
Jocelyn: arXiv:1810.09538 Bouwens R.
Vera: J., et al., 2022, ApJ, 931, 160 Bradley J., et al., 2018, JAX: composable transformations of Python+NumPy programs, http://github.com/jax-ml/jax Brook C.
Title and authors: Vera: So we've seen that geko is a tool designed to model galaxy kinematics and morphology using NIRCam grism data, and now we’re looking at what the authors actually put into that title: "geko: A tool for modelling galaxy kinematics and morphology in JWST/NIRCam slitless spectroscopic observations."
Jocelyn: That title really gets to the point about what the paper is trying to achieve—it’s not just some abstract fitting routine; it’s a specific tool built for the slitless spectroscopy data coming from JWST and NIRCam. The authors are clearly emphasizing that this isn't just a general method, but one tailored to these specific instruments.
Subrahmanyan: For structure formation studies, this is important because it tackles the problem that comes up when you have these large surveys; you can see the light distribution, but you need the kinematics to understand how that matter is assembling itself into galaxies over time. The paper shows how they tackle that linkage specifically for JWST observations.
Vera: If we think about this in terms of what it means for us observing the sky, it means we can now start getting spatially resolved maps of emission lines across cosmic times, which was a major hurdle before. This tool provides the framework to move beyond just measuring average properties and actually map out where things are happening in the galaxy.
Jocelyn: It’s about moving from a global picture to a local one; you can finally see velocity gradients and dispersion variations within a single galaxy, which tells us about internal structure, not just bulk motion. The authors are showing that this is achievable with these specific grism observations.
Subrahmanyan: And for the cosmology side, getting these detailed kinematic constraints on high redshift galaxies helps us test our models of how dark matter halos grow; if the kinematics don't match what we predict for a given galaxy mass at that epoch, it gives us a constraint.
Vera: So in short, they’re giving astronomers a concrete way to extract physical parameters from these complex observations using a rigorous statistical framework. The name itself highlights the tool and the specific observational technique being used.
Jocelyn: And for the listener who is interested in time-domain astronomy, it suggests that follow-up observations could be guided by these initial kinematic maps, helping us decide which galaxies to spend telescope time on next.
Subrahmanyan: It opens the door for statistical studies of galaxy dynamics at high redshift; this kind of detailed mapping is what we need to build the statistical foundations for understanding how structure forms in the early Universe.
The paper's summary: Vera: So, what’s the actual substance of this paper? Essentially, they present geko as a Python package that forward models NIRCam grism observations and then infers the emission-line morphologies and kinematics using a Bayesian framework. They are solving that degeneracy problem we talked about earlier.
Jocelyn: That's right, the core summary is about using this forward modelling approach to infer intrinsic properties like effective radius, velocity dispersion, rotational velocity, rotational support, and dynamical mass from the observed data. They’re systematically accounting for instrumental effects by convolving the three dee model cube with the point spread function and line spread function before projecting it onto the grism detector plane <ref:2510.07369#pg2>.
Subrahmanyan: The key takeaway here is that they take a 2D image and a spectrum, and through this process of likelihood comparison, they sample the posterior distributions of all those parameters simultaneously <ref:2510.07369#pg1>. They are not just fitting one thing; they are inferring the entire physical state of the galaxy from the data.
Vera: They use a specific set of model components: a Sérsic profile for surface brightness and an idealized thin disk model for kinematics, which uses an arctangent function for rotation and a constant isotropic value for dispersion.
Jocelyn: And they do this all within a framework where the likelihood is Gaussian, comparing their constructed 2D model to the actual grism map <ref:2510.07369#pg1>. It’s a very structured way to handle the comparison between theory and observation in this context.
Subrahmanyan: The paper summarizes that the code takes as input continuum subtracted grism data and priors for morphology, then outputs spatially resolved emission line maps and kinematic maps based on sampled parameters. This is a complete pipeline from raw data to physical interpretation.
Vera: So, the summary is that they provide a complete inference process where they take an image and a spectrum, build a model based on some assumed parameters—like Sérsic and thin disk—and then compare it to what you actually see in the grism map.
Jocelyn: And the implication is that this allows us to derive spatially resolved emission line maps and velocity fields, which are constrained by the derived model parameters. It’s a powerful way to get detailed internal information from these observations.
Subrahmanyan: This moves us toward constraining galaxy dynamics at high redshift, which is where we can start building the statistical foundation for understanding how structure forms in the early Universe based on these detailed measurements.
The paper's improvements: Vera: Now let’s talk about what they suggest are improvements to this work. They acknowledge that while it works well for idealized cases, there are ways to make it more robust when dealing with more complex objects.
Jocelyn: One key suggestion is incorporating morphological fitting directly within the code, which means making the code more flexible so you don't have to manually change every parameter every time you want to model something new. They also suggest adding multiple component fitting for mergers or clumpy systems, maybe using a non-parametric grid delta v over x and y.
Subrahmanyan: That’s interesting because it suggests moving away from the fixed thin disk assumption; if galaxies are mergers or clumpy, a simple disk model won't capture the complexity. Modeling those complex systems requires more sophisticated components than just one simple disk.
Vera: Another major improvement mentioned is joint fitting of emission lines across different filters and both dispersion directions, which is the R and C modes. This allows them to recover intrinsic maps with more flexibility because they aren't stuck assuming a single direction for velocity or dispersion.
Jocelyn: So, combining the R and C modes means you can get richer information about the intrinsic maps and velocity gradients without having to assume a specific orientation for the galaxy, which is a big deal for getting more accurate physical results.
Subrahmanyan: From a theoretical standpoint, this joint fitting capability helps us constrain the underlying physics of gas dynamics; if we can map both dispersion directions, we get a much better handle on how turbulent and supported the gas is in that system.
Vera: The paper also points out that their current setup uses priors for the free parameters to guide the inference, which is good for stability, but it also means you have to be careful about those priors not biasing your results too much.
Jocelyn: That’s a fair point; they are using optimized gradient-based sampling algorithms, which makes the process fast on GPUs, fitting a galaxy in about twenty minutes. So the improvement is both in robustness for complex objects and speed for running these fits.
Subrahmanyan: The paper does flag that one limitation of their current approach is that it relies on parametric models like Sérsic and an arctangent velocity curve to derive the kinematics; if those underlying assumptions are wrong, the resulting maps will be flawed.
Conclusion: Vera: Wrapping up this discussion on "geko: A tool for modelling galaxy kinematics and morphology in JWST/NIRCam slitless spectroscopic observations," it’s clear that this work provides a powerful computational framework for extracting physical properties from these challenging JWST data.
Jocelyn: It moves us toward being able to get spatially resolved emission line maps, which is a big step forward in understanding galaxy structure at high redshift, especially when we combine it with the improved flexibility discussed in the paper.
Subrahmanyan: For cosmology, this tool provides the means to build statistical studies of galaxy dynamics at high redshift; it’s a key piece of the puzzle for testing structure formation models as we look further back in cosmic time.
Vera: So, what does this all mean practically? It means future JWST observations won't just be about looking at average properties anymore; they’ll be about mapping out the internal dynamics of individual galaxies.
Jocelyn: And the next steps involve applying these improvements to complex systems and joint fitting across filters and dispersion directions to push those observational limits further.
Subrahmanyan: That's where we go next, pushing those limits on what we can constrain for structure formation in the early Universe using these detailed kinematic maps.
Vera: So that’s our time on this paper, a tool that helps us map out the internal dynamics of galaxies using JWST slitless spectroscopy.
Jocelyn: We’ll be back after the break.
Kavli Institute for Cosmology, University of Cambridge · Cavendish Laboratory, University of Cambridge
astro-ph.GA
Submitted: 2025-10-08
Updated: 2025-10-08
Comments: 14 pages, 11 figures, 1 table, submitted to MNRAS
Journal ref: Mon Not R Astron Soc (2026)
Code: https://github.com/angelicalola-danhaive/geko
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 83/100
The gist: Wide-field slitless spectroscopy (WFSS) is a powerful tool for studying large samples of galaxies across cosmic times The Grism Emission-line Kinematics tOol (geko)…
Key concepts
- Wide-field Slitless Spectroscopy (WFSS)
- This is a powerful technique used to study many galaxies at once across different cosmic times. It involves taking a broad view of a galaxy and analyzing its light across many spatial points simultaneously, rather than focusing on just one narrow slit.
- geko
- geko is the Python package that performs the modeling. It uses forward-modeling to simulate how a galaxy's structure and motion should look in the observed data, then uses Bayesian inference to figure out what those underlying physical properties are.
- Sérsic Profile
- This is a mathematical model used to describe the surface brightness (how bright the galaxy is) as it fades away from its center. It helps define the overall shape and size of the galaxy being studied.
- Bayesian Inference
- This is a statistical method used to update our beliefs about unknown parameters (like velocity or mass) as we get new data. geko uses this to find the best possible values for galaxy properties by comparing theoretical models to actual observations.
Terminology
Summary
Wide-field slitless spectroscopy (WFSS) is a powerful tool for studying large samples of galaxies across cosmic times The Grism Emission-line Kinematics tOol (geko), a Python package that forward-models NIRCam grism observations and infers emission-line morphologies and kinematics within a Bayesian framework, recovers parameters such as effective radius, velocity dispersion, rotational velocity, rotational support, and dynamical mass
Tool Development
geko combines forward-modelling of the grism instrument with a Bayesian inference framework to infer the model parameters of the galaxy The tool leverages optimized gradient-based sampling algorithms via jax/numpyro for efficient inference, allowing a galaxy to be fit in approximately twenty minutes on GPUs The framework accounts for instrumental effects by convolving the 3D model cube with the PSF and LSF kernels before projecting it onto the grism detector plane
Model Components
The tool combines forward-modelling of the grism instrument with a Bayesian inference framework to infer the model parameters of the galaxy The morphological modeling uses a Sérsic profile as a base model for surface brightness, requiring seven free parameters including inclination, position angle, effective radius, and Sérsic index Kinematic modeling utilizes an idealized thin disk model where the rotational velocity is described by an arctangent function and the velocity dispersion is modeled as a constant isotropic value across the disk
Inference Methodology
The inference process uses numpyro, which is based on jax, allowing for automatic differentiation and just-in-time (JIT) compilation to boost performance The likelihood function is Gaussian, defined by the comparison between the 2D model spectrum and the observed grism map The sampling employs The No-U-Turn-Sampler (NUTS), an adaptation of Hamiltonian Monte Carlo (HMC), which is optimized for GPUs to sample posterior distributions efficiently
Validation and Application
Performance is validated using extensive mock data spanning position angle, S/N, and morphology to quantify where degeneracies limit recovery Applications are demonstrated on real FRESCO Halpha emitters at z ≈ 4 − 6, recovering both rotation- and dispersion-dominated systems The tool opens the door to statistical studies of galaxy dynamics in the early Universe
Future Directions
Planned developments include implementing morphological fitting directly within the code, incorporating multiple component fitting for mergers and clumpy systems, and implementing joint fitting of emission lines using both dispersion directions (R and C) to recover intrinsic maps with more flexibility This methodology aims to reconstruct a spatially resolved emission line map without assuming a Sérsic light distribution
Conclusions
geko fits the emission line morphology and kinematics using parametric models, namely a Sérsic profile and an arctangent velocity curve, which are projected onto the sky based on the inclination and position angle of the galaxy The tool opens the door to statistical analyses of galaxy kinematics at high redshift, ushering in the study of early galaxy formation through a dynamical lens
Acknowledgements
We thank Benjamin D. Johnson, Fengwu Sun and Eiichi Egami for technical insights which helped in the development of the code We thank Hannah Übler, Emily Wisnioski, William McClymont and the JADES collaboration for helpful discussions ALD thanks the University of Cambridge Harding Distinguished Postgraduate Scholars Programme and Technology Facilities Council (STFC) Center for Doctoral Training (CDT) in Data intensive science at the University of Cambridge (STFC grant number 2742605) for a PhD studentship ALD and ST acknowledge support by the Royal Society Research Grant G125142
References
Arribas S., et al., 2024, A&A, 688, A146 Bingham E. p. 4 To
achieve this, we use numpyro, as described in the following section. 1 numpyro and jax
numpyro (Bingham et al. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. Jones et al. 2021; Bouwens et al. 2021; Bouwens et al. 2022; Parlanti
et al. It
is based on jax (Bradbury et al. 2018), which is a library allowing for program transformations, such as automatic differentiation
and just-in-time (JIT) compilation, of Python functions. We present the
Grism Emission-line Kinematics tOol (geko), a Python package that forward-models NIRCam grism observations and infers
emission-line morphologies and kinematics within a Bayesian framework. geko combines Sérsic surface-brightness models
with arctangent rotation curves, includes full point-spread function (PSF) and line-spread function (LSF) convolution, and
leverages gradient-based sampling via jax/numpyro for efficient inference. Assuming virial equilibrium, the circular velocity of galaxies is
computed by combining the effects of gravity and turbulence-induced
pressure. The first term is the rotational velocity, and the latter is
an asymmetric drift correction to account for the pressure support
(Burkert et al. These IFU studies have
★ ald66@cam. uk
also extended to stellar kinematics, using absorption lines, to characterize the kinematics of early-type galaxies (see Cappellari 2016,
and references therein). 1 Morphological modelling
The first step in geko is to model the intrinsic emission line map
of the galaxy. As a base model for the surface brightness, we use a
Sérsic profile (Sersic 1968):
𝐼(𝑟) = 𝐼𝑒 exp(
−𝑏𝑛
"
𝑟
𝑟e
1/𝑛
− 1
#), (1)
where 𝐼𝑒 is the intensity at the half-light radius𝑟e, 𝑛 is the Sérsicindex,
and 𝑏𝑛 = 𝑏(𝑛) is approximated by a polynomial3
(Ciotti & Bertin
1999). 1 Morphological modelling
The first step in geko is to model the intrinsic emission line map
of the galaxy. As a base model for the surface brightness, we use a
Sérsic profile (Sersic 1968):
𝐼(𝑟) = 𝐼𝑒 exp(
−𝑏𝑛
"
𝑟
𝑟e
1/𝑛
− 1
#), (1)
where 𝐼𝑒 is the intensity at the half-light radius𝑟e, 𝑛 is the Sérsicindex,
and 𝑏𝑛 = 𝑏(𝑛) is approximated by a polynomial3
(Ciotti & Bertin
1999). 4 Danhaive & Tacchella
matter haloes, their kinematics are well modelled by the arctangent
function (Courteau 1997; Miller et al. 2011):
𝑣rot(𝑟int, 𝑟t
, 𝑉𝑎) =
2
𝜋
𝑉𝑎 arctan
𝑟int
𝑟t
, (4)
where 𝑣rot is the rotational velocity at a given radius 𝑟int in the
intrinsic galaxy plane, 𝑉𝑎 is the asymptotic value that the arctangent
rotation curve tends to at large radii 𝑟int → ∞ , and 𝑟t
is the turnaround radius of the rotation curve. 4 Danhaive & Tacchella
matter haloes, their kinematics are well modelled by the arctangent
function (Courteau 1997; Miller et al. 2011):
𝑣rot(𝑟int, 𝑟t
, 𝑉𝑎) =
2
𝜋
𝑉𝑎 arctan
𝑟int
𝑟t
, (4)
where 𝑣rot is the rotational velocity at a given radius 𝑟int in the
intrinsic galaxy plane, 𝑉𝑎 is the asymptotic value that the arctangent
rotation curve tends to at large radii 𝑟int → ∞ , and 𝑟t
is the turnaround radius of the rotation curve. 2024; Arribas et al. This instrument also allowed for the first constraints on resolved stellar
kinematics beyond 𝑧 ≈ 3 (D’Eugenio et al. 2 Danhaive & Tacchella
(FoV), and is available in all of the NIRCam long wavelength (LW)
filters, meaning it probes wavelengths 𝜆obs = 2. Thanks
to its slitless nature, it does not suffer from the MSA’s selection
bias or partial slit covering, which is hard to quantify. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. 2016)
beyond cosmic noon (Brammer et al. ) and in mapping out
star formation on spatially resolved scales (Domínguez et al. The NIRCam
grisms follow from their predecessors on the Hubble Space Telescope
(HST)’s Wide Field Camera 3 (WFC3), which did not have the
necessary spectral resolution for kinematic modelling but were key
in pushing the redshift frontier (Rhoads et al. 2013; Oesch et al. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. 2017), where the
cosmic star formation rate (SFR) density peaks (Madau & Dickinson 2014), to thin cold disks in the local Universe (e. Epinat et al. Galaxies form
through the accretion of gas into dark matter halos, where gas can
cool to form stars. (Fall & Efstathiou 1980; Mo et al. Galaxies form
through the accretion of gas into dark matter halos, where gas can
cool to form stars. (Fall & Efstathiou 1980; Mo et al. We model a constant isotropic velocity dispersion 𝜎0 across the
disk based on deep adaptive optics imaging spectroscopy studies at
lower redshift (Genzel et al. 2008; Förster Schreiber et al. 2 Although at 𝑧 ∼ 2, clumps clearly visible in the flux maps had no strong
effect on the ionized gas kinematics (e. Genzel et al. We model a constant isotropic velocity dispersion 𝜎0 across the
disk based on deep adaptive optics imaging spectroscopy studies at
lower redshift (Genzel et al. 2008; Förster Schreiber et al. 2018), which is a library allowing for program transformations, such as automatic differentiation
and just-in-time (JIT) compilation, of Python functions. Automatic
differentiation (Griewank & Walther 2000) describes a set of computational methods for the rapid, automated calculation of mathematical derivatives. 2018), which is a library allowing for program transformations, such as automatic differentiation
and just-in-time (JIT) compilation, of Python functions. Automatic
differentiation (Griewank & Walther 2000) describes a set of computational methods for the rapid, automated calculation of mathematical derivatives. 2018), which is a library allowing for program transformations, such as automatic differentiation
and just-in-time (JIT) compilation, of Python functions. Automatic
differentiation (Griewank & Walther 2000) describes a set of computational methods for the rapid, automated calculation of mathematical derivatives. This
boosts the performance of numpyro compared to otherwise similar
inference tools. In order to sample the posterior distributions of our free model
parameters, we use The No-U-Turn-Sampler (NUTS; Hoffman &
Gelman 2011), which is an adaptation of an HMC algorithm. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. Jones et al. 2021; Bouwens et al. Jones et al. 2021; Bouwens et al. In order to obtain continuum-subtracted
emission-line maps in Danhaive et al. (2025), we use row-by-row
median filtering (Kashino et al. 2022; Parlanti
et al. 2023; Zavala et al. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. 2016; Simons et al. 2017), where the
cosmic star formation rate (SFR) density peaks (Madau & Dickinson 2014), to thin cold disks in the local Universe (e. 2016; Simons et al. 2017), where the
cosmic star formation rate (SFR) density peaks (Madau & Dickinson 2014), to thin cold disks in the local Universe (e. 2013;
Nelson et al. The JWST Near Infrared Imager and Slitless
Spectrograph (NIRISS) shares the WFSS capability of the NIRCam
grism mode, making it another powerful probe of resolved stellar
populations (Matharu et al. Typically, these priors will be
derived from modelling of available imaging of the galaxy. The code
currently can receive as input modelling results from pysersic (Pasha
& Miller 2023), which is used to create priors for the morphological
parameters (see Sec. 4 Danhaive & Tacchella
matter haloes, their kinematics are well modelled by the arctangent
function (Courteau 1997; Miller et al. 2011):
𝑣rot(𝑟int, 𝑟t
, 𝑉𝑎) =
2
𝜋
𝑉𝑎 arctan
𝑟int
𝑟t
, (4)
where 𝑣rot is the rotational velocity at a given radius 𝑟int in the
intrinsic galaxy plane, 𝑉𝑎 is the asymptotic value that the arctangent
rotation curve tends to at large radii 𝑟int → ∞ , and 𝑟t
is the turnaround radius of the rotation curve. Automatic
differentiation (Griewank & Walther 2000) describes a set of computational methods for the rapid, automated calculation of mathematical derivatives. They are highly efficient when using Markov Chain
Monte Carlo (MCMC) algorithms, such as Hamiltonian Monte Carlo
(HMC; Neal 2011), which rely on the computation of gradients. Automatic
differentiation (Griewank & Walther 2000) describes a set of computational methods for the rapid, automated calculation of mathematical derivatives. They are highly efficient when using Markov Chain
Monte Carlo (MCMC) algorithms, such as Hamiltonian Monte Carlo
(HMC; Neal 2011), which rely on the computation of gradients. ) and in mapping out
star formation on spatially resolved scales (Domínguez et al. 2013;
Nelson et al. 2016, 2020), HST (Outini & Copin 2020), and the NIRSpec/MSA (de Graaff et al. Some approaches have also been
explored for the NIRCam grism data (Nelson et al. The first term is the rotational velocity, and the latter is
an asymmetric drift correction to account for the pressure support
(Burkert et al. 2010; Newman et al. The NIRCam
grisms follow from their predecessors on the Hubble Space Telescope
(HST)’s Wide Field Camera 3 (WFC3), which did not have the
necessary spectral resolution for kinematic modelling but were key
in pushing the redshift frontier (Rhoads et al. 2013; Oesch et al. 2013; Oesch et al. 2016)
beyond cosmic noon (Brammer et al. During
this process, the stars and the gas can be measured and carries crucial
information on how the galaxies is building its stellar mass. This is
particularly evident through disruptive events such as starburst driven
outflows (Oppenheimer & Davé 2008; Oppenheimer et al. During
this process, the stars and the gas can be measured and carries crucial
information on how the galaxies is building its stellar mass. This is
particularly evident through disruptive events such as starburst driven
outflows (Oppenheimer & Davé 2008; Oppenheimer et al. This approach
has already been successfully applied to 2D spectra from MOSFIRE
(Price et al. 2016, 2020), HST (Outini & Copin 2020), and the NIRSpec/MSA (de Graaff et al. 2021; Bouwens et al. 2022; Parlanti
et al. 2022; Parlanti
et al. 2023; Zavala et al. 2024; Belli et al. 2024;
Pascalau et al. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. Typically, these priors will be
derived from modelling of available imaging of the galaxy. The code
currently can receive as input modelling results from pysersic (Pasha
& Miller 2023), which is used to create priors for the morphological
parameters (see Sec. Typically, these priors will be
derived from modelling of available imaging of the galaxy. The code
currently can receive as input modelling results from pysersic (Pasha
& Miller 2023), which is used to create priors for the morphological
parameters (see Sec. However, due to
the IFU’s limited field of view, this instrument typically focuses on
single- or few-object studies. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. The JWST Near Infrared Imager and Slitless
Spectrograph (NIRISS) shares the WFSS capability of the NIRCam
grism mode, making it another powerful probe of resolved stellar
populations (Matharu et al. 2023; Pirzkal et al. , Wisnioski et al. 2015;
Price et al. 2015;
Price et al. 2016; Tiley et al. This approach
has already been successfully applied to 2D spectra from MOSFIRE
(Price et al. 2016, 2020), HST (Outini & Copin 2020), and the NIRSpec/MSA (de Graaff et al. 2021; Bouwens et al. 2022; Parlanti
et al. The best fit parameters for the constant factors in this function have been calibrated
during commissioning for each module/filter/pupil combination (for
full details, see Sun et al. These commissioning observations
were obtained through Program #1076 (PI: Pirzkal) during the commissioning phase of the instrument (Rieke et al. The best fit parameters for the constant factors in this function have been calibrated
during commissioning for each module/filter/pupil combination (for
full details, see Sun et al. These commissioning observations
were obtained through Program #1076 (PI: Pirzkal) during the commissioning phase of the instrument (Rieke et al. 2012; Übler et al. 2014), non-coplanar gas inflows, and
mergers, which leave clear marks on the measured kinematics (Sales
et al. 2023; Zavala et al. 2024; Scholtz et al. 1 Morphological modelling
The first step in geko is to model the intrinsic emission line map
of the galaxy. As a base model for the surface brightness, we use a
Sérsic profile (Sersic 1968):
𝐼(𝑟) = 𝐼𝑒 exp(
−𝑏𝑛
"
𝑟
𝑟e
1/𝑛
− 1
#), (1)
where 𝐼𝑒 is the intensity at the half-light radius𝑟e, 𝑛 is the Sérsicindex,
and 𝑏𝑛 = 𝑏(𝑛) is approximated by a polynomial3
(Ciotti & Bertin
1999). 2016; Tiley et al. 2016; Simons et al. The dispersion function
can be written as a polynomial
Δ𝑥(𝑥0, 𝑦0, 𝜆) = 𝛼1 + 𝛼2 · 𝜆 + 𝛼3 · 𝜆
2 + 𝛼4 · 𝜆
3
, (8)
where the coefficients 𝛼𝑖 depend on 𝑥0, 𝑥2
0
, 𝑦0 and 𝑦
2
0
. The best fit parameters for the constant factors in this function have been calibrated
during commissioning for each module/filter/pupil combination (for
full details, see Sun et al. The dispersion function
can be written as a polynomial
Δ𝑥(𝑥0, 𝑦0, 𝜆) = 𝛼1 + 𝛼2 · 𝜆 + 𝛼3 · 𝜆
2 + 𝛼4 · 𝜆
3
, (8)
where the coefficients 𝛼𝑖 depend on 𝑥0, 𝑥2
0
, 𝑦0 and 𝑦
2
0
. The best fit parameters for the constant factors in this function have been calibrated
during commissioning for each module/filter/pupil combination (for
full details, see Sun et al. The dispersion function
can be written as a polynomial
Δ𝑥(𝑥0, 𝑦0, 𝜆) = 𝛼1 + 𝛼2 · 𝜆 + 𝛼3 · 𝜆
2 + 𝛼4 · 𝜆
3
, (8)
where the coefficients 𝛼𝑖 depend on 𝑥0, 𝑥2
0
, 𝑦0 and 𝑦
2
0
. The best fit parameters for the constant factors in this function have been calibrated
during commissioning for each module/filter/pupil combination (for
full details, see Sun et al. 2
geko: A tool for modelling galaxy kinematics and morphology in
JWST/NIRCam slitless spectroscopic observations
A. Lola Danhaive 1,2 ★ and Sandro Tacchella 1,2
1Kavli Institute for Cosmology, University of Cambridge, Madingley Road, Cambridge, CB3 0HA, UK
2Cavendish Laboratory, University of Cambridge, 19 JJ Thomson Avenue, Cambridge, CB3 0HE, UK
Accepted XXX. 2015;
Price et al. 2016; Tiley et al. We therefore set 𝑥0, 𝑦0 to be at the centre of
the detector. The 𝛼 coefficients are expressed as polynomials which
depend on 𝑥0 and 𝑦0 in the following way:
𝛼1 =𝛼10 + 𝛼11 · 𝑥0 + 𝛼12 · 𝑦0 + 𝛼13 · 𝑥
2
0 + 𝛼14 · 𝑦
2
0 + 𝛼15 · 𝑥0 𝑦0
𝛼2 =𝛼20 + 𝛼21 · 𝑥0 + 𝛼22 · 𝑦0 + 𝛼23 · 𝑥
2
0 + 𝛼24 · 𝑦
2
0 + 𝛼25 · 𝑥0 𝑦0
𝛼3 =𝛼30 + 𝛼31 · 𝑥0 + 𝛼32 · 𝑦0
𝛼4 =𝛼4
The 0
th order factors (𝛼𝑖0) are of the order of O ∼ 103 − 100
,
whereas the higher order factors (𝛼𝑖 𝑗=1,2,3,4,5) are much smaller (O ∼
10−3 − 10−7
). 2012; Übler et al. 2014), non-coplanar gas inflows, and
mergers, which leave clear marks on the measured kinematics (Sales
et al. (6)
Although some high-resolution observations of molecular and atomic
gas in the local Universe have shown radially declining velocity
dispersions, the observed radial changes are well below the NIRCam
grism spectral resolution (for a more detailed discussion see Übler
et al. 2019, and references therein). In particular, studies
of ionised gas kinematics have uncovered the evolution of the starforming galaxy population, at stellar masseslog 𝑀★ [M⊙] > 10−11,
from thick gas-rich disks at cosmic noon (e. , Wisnioski et al. 2
by default, as our first application of this code (Danhaive et al. 2025)
is with galaxies at high redshift, where galaxies are assumed to
be thick (Wuyts et al. 2022; Parlanti
et al. 2023; Zavala et al. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al. In contrast to these two instruments, NIRCam’s grism mode offers
the possibility of studying kinematics for large samples of galaxies,
This mode produces 2D spectra for all galaxies in the field-of-view
© 2025 The Authors
arXiv:2510. 2014), non-coplanar gas inflows, and
mergers, which leave clear marks on the measured kinematics (Sales
et al. 2012; Zolotov et al. However, due to
the IFU’s limited field of view, this instrument typically focuses on
single- or few-object studies. The NIRSpec micro-shutter assembly
(MSA) is able to increase sample sizes with respect to the IFU, and
has a point source resolution which can reach up to 𝑅 ≈ 4000−5000,
subject to future calibration (de Graaff et al.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Appendix Details
In the section, we detail the derivation of the observed galaxy coordinates defined in Eq. A8 from the galaxy plane This allows us to move between the two reference frames, and in particular convert from the rotational velocity Vrot, as defined on the galaxy plane to the measured observed velocity Vobs
Test Results
In Figure B1, we show the results of the idealized kinematic recovery tests performed on noiseless mock grism data The degeneracy between the morphology and kinematics is strongest at PA = 90◦, confirming expected limitations In Figure B4, the posterior distributions for all of the free parameters show that the kinematic posteriors are well constrained despite flat priors The recovery of rotational velocity at the effective radius vre is good across all tested parameter spaces
Real Data Application
In Section 4, we demonstrate the usage of geko on real data, using examples various Halpha emitters at z ≈ 4−6 taken from the sample described in Danhaive et al. (2025) The results show that the best fit value is in good agreement with previous works for rotational velocity at the effective radius In Fig. p. 8 For the recovery of 𝜎0 and 𝑣re, we show our results on
Fig. We find that we are able to recover the true values of 𝜎0 and
𝑣re within the uncertainties, but we note that the best-fit value of 𝑣re
gets worse when 𝑟e is underestimated (i.Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI system can perform forward modelling of NIRCam grism observations to infer emission-line morphologies and kinematics within a Bayesian framework using a Python package named geko.
-
The improved system can recover parameters such as effective radius, velocity dispersion, rotational velocity, rotational support, and dynamical mass with typical run times of approximately twenty minutes per galaxy on GPUs.
-
The system can handle complex objects like clumpy systems and merging objects by incorporating additions to the model such as a non-parametric grid Delta v(x, y) or a second disk component with a free kinematic centroid.
-
The improved system can perform joint fitting of emission lines across different filters and both dispersion directions (R and C modes) to recover intrinsic maps and velocity gradients with more flexibility.
Abstract
Wide-field slitless spectroscopy (WFSS) is a powerful tool for studying large samples of galaxies across cosmic times. With the arrival of JWST, and its NIRCAM grism mode, slitless spectroscopy can reach a medium spectral resolution of (R about 1600), allowing it to spatially resolve the ionised-gas kinematics out to z about 9. However, the kinematic information is convolved with morphology along the dispersion axis, a degeneracy that must be modelled to recover intrinsic properties. We present the Grism Emission-line Kinematics tOol (geko), a Python package that forward-models NIRCam grism observations and infers emission-line morphologies and kinematics within a Bayesian framework. geko combines Sérsic surface-brightness models with arctangent rotation curves, includes full point-spread function (PSF) and line-spread function (LSF) convolution, and leverages gradient-based sampling via jax / numpyro for efficient inference. It recovers parameters such as effective radius, velocity dispersion, rotational velocity, rotational support, and dynamical mass, with typical run times of about 20 minutes per galaxy on GPUs. We validate performance using extensive mock data spanning position angle, S/N, and morphology, quantifying where degeneracies limit recovery. Finally, we demonstrate applications to real FRESCO H α emitters at z about 4-6, recovering both rotation- and dispersion-dominated systems. geko opens the way to statistical studies of galaxy dynamics in the early Universe and is publicly available at https://github.com/angelicalola-danhaive/geko.
Sources
- Pyro: Deep Universal Probabilistic Programming
- The dawn of disks: unveiling the turbulent ionised gas kinematics of the galaxy population at $z\sim4-6$ with JWST/NIRCam grism spectroscopy
- Overview of the JWST Advanced Deep Extragalactic Survey (JADES)
- The No-U-Turn Sampler: Adaptively Setting Path Lengths in Hamiltonian Monte Carlo
- JADES: Rest-frame UV-to-NIR Size Evolution of Massive Quiescent Galaxies from Redshift z=5 to z=0.5
- MAGNIF: A Tentative Lensed Rotating Disk at $z=8.34$ detected by JWST NIRCam WFSS with Dynamical Forward Modeling
- Characterizing Dust Extinction and Spatially Resolved Paschen-$\alpha$ Emission within 97 Galaxies at $1<z<1.6$ with JWST NIRCam Slitless Spectroscopy
- When relics were made: vigorous stellar rotation and low dark matter content in the massive ultra-compact galaxy GS-9209 at z=4.66
- Composable Effects for Flexible and Accelerated Probabilistic Programming in NumPyro
- Tentative rotation in a galaxy at z$\sim$14 with ALMA
- Slitless Areal Pure-Parallel HIgh-Redshift Emission Survey (SAPPHIRES): Early Data Release of Deep JWST/NIRCam Images and Spectra in MACS J0416 Parallel Field
- ALMA detection of [OIII] 88um at z=12.33: Exploring the Nature and Evolution of GHZ2 as a Massive Compact Stellar System
Related papers
- The Pristine survey XXVIII. Journey to the Galactic outskirts: Mapping the outer halo red giant stars down to the very metal-poor end
- Origins of Extreme Emission-Line Ratios in z > 3 Galaxies: Insights from the Lumen Model
- The Kinematically Hot, Extremely Metal-Poor C-19 Stellar Stream in DESI DR2
- UV slopes of Starforming Galaxies in Strong Lensing fields at the Epoch of Reionization with JWST
- Evolution of Binaries Under Stochastic Perturbations
- The hydrodynamical response of cold circumgalactic clouds to quasar radiation