Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys

arXiv:2510.03256 · physics.gen-ph · Submitted 2025-09-26 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys".

Mira: Here's the gist of the paper. Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys reports experimental results indicating possible high-temperature superconductivity in graphite intercalation compounds synthesized with lithium-based alloys Temperature-dependent measurements of magnetization, trapped magnetic flux, and electrical resistance reveal transitions with critical temperatures (Tc) in the range of 240-350 K at ambient pressure, depending on intercalation metals and conditions.

Kai: The highest Tc values and largest high-Tc fractions (≲ 0.1 %) were observed in graphite samples intercalated with ternary Sr-Ca-Li alloy.

Mira: Experimental Observations of High-Tc Transitions The study focused on three types of samples obtained by intercalation of expanded graphite sheets (EG) with melts of pure Li metal, binary Ca-Li alloy, and ternary Sr-Ca-Li.

Kai: For the binary Ca–Li alloy, temperature-dependent magnetization measurements showed a well-established superconducting transition near 11.5 K and a high-Tc transition near 240 K.

Paper summary: Kai: To summarize this paper, we're talking about "Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys". The core idea is that they synthesized graphite compounds by intercalating them with lithium based alloys and found temperature dependent measurements that suggest possible high temperature superconductivity.

Mira: They report transitions in critical temperatures, Tc, between two hundred forty and three hundred fifty Kelvin at ambient pressure <ref:2510.03256#pg1>. They specifically highlighted that the highest Tc values and the largest fractions of high temperature superconductivity were observed in graphite samples using a ternary strontium calcium lithium alloy.

Lev: The paper focuses on what they found through temperature dependent measurements of magnetization, trapped magnetic flux, and electrical resistance to reveal these transitions depending on the intercalation metals and conditions.

Kai: They looked at three types of samples: pure lithium metal, binary ca lithium alloy, and the ternary Sr calcium lithium alloy. For the binary ca lithium alloy, they saw a low Tc transition near eleven point five Kelvin and a high Tc transition near two hundred forty Kelvin <ref:2510.03256#pg3,a low Tc transition near 11>.

Mira: Then for the ternary strontium calcium lithium alloy, they observed high Tc transitions up to three hundred fifty Kelvin in some samples, like Sample IIIc which showed one near three hundred fifty Kelvin <ref:2510.03256#pg1>. They also saw that co-intercalation with strontium increased the high Tc transition temperature to two hundred sixty-one Kelvin <ref:2510.03256#pg1>.

Lev: The paper goes into the mechanisms supporting this by suggesting the transitions originate from local superconductivity rather than intrinsic magnetic properties of the graphite itself, which is an important distinction.

Kai: They provide evidence for this through temperature dependent magnetization in both zero field cooling and field cooling modes, showing expulsion of applied magnetic fields below Tc.

Mira: They also found characteristic field dependent magnetization behavior typical for type two superconductors, including a sharp initial increase and reaching a maximum at specific magnetic fields.

Lev: They investigated magnetic flux trapping analysis as a hallmark of superconductivity and found that the temperature dependence of the trapped magnetic moment, mtrap(T), showed a clear stepwise transition around two hundred seventy Kelvin for the ternary sample <ref:2510.03256#pg3>.

Kai: The paper also notes that while pure lithium only did not show any high Tc anomalies in magnetization measurements, this confirms that the observed high Tc anomaly is due to intercalated ca atoms in accordance with the result of their companion study.

Mira: In essence, they conclude that localized nanoscale strontium calcium lithium metal flakes or particles adopt the phonon spectrum of the surrounding graphite matrix to generate conventional electron-phonon superconductivity in those particles at room temperature.

Conclusion: Kai: So wrapping up this discussion on "Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys", what we see is experimental evidence pointing toward high temperature transitions in these graphite intercalation compounds.

Mira: The paper explored the findings across different systems, from binary ca lithium to ternary Sr calcium lithium alloys, highlighting that the ternary alloy gave them the highest Tc values, up to three hundred fifty Kelvin <ref:2510.03256#pg1>.

Lev: The main implication is that they are suggesting that these transitions are due to local superconductivity occurring in nanoscale particles within the graphite matrix rather than properties of the bulk graphite structure itself.

Kai: This means they're pointing toward a mechanism where localized structures adopt the phonon spectrum of the surrounding graphite to achieve conventional electron-phonon superconductivity even at room temperature.

Mira: They are suggesting that while we see some evidence for high temperature behavior, it needs further investigation to confirm this origin and test these proposed mechanisms.

Lev: The authors themselves flag that they intend to pursue further investigations specifically to test the proposed local superconductivity mechanism against other alternative explanations.

Kai: This work shows that even in complex intercalation systems, there's potential for high temperature behavior when you tune the stoichiometry and the specific alloy used, like with strontium co-intercalation.

Mira: The real value here is that it points toward a path where we can engineer these materials to see superconductivity at higher temperatures through precise material design.

Lev: It's about understanding how to make those local particles behave in a way that supports the observed high Tc transitions, which is what we need for any kind of practical application.

Max Planck Institute for Chemistry

physics.gen-ph

Submitted: 2025-09-26

Updated: 2026-11-10

Comments: Added references, extended SI

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 80/100

The gist: Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys reports experimental results indicating possible high-temperature superconductivity in graphite…

Key concepts

High-$T_c$ Transition
This refers to a sharp change in electrical or magnetic properties that occurs at a specific temperature ($T_c$). In this study, transitions were observed up to 350 K, indicating potential superconductivity in the graphite samples when doped with lithium-based alloys.
Magnetic Flux Trapping
This is a key experimental signature of superconductivity where magnetic flux lines become trapped within the material below the critical temperature. The study showed that the temperature dependence of this trapped magnetic moment strongly correlated with the observed high-$T_c$ transitions, suggesting a superconducting origin.
Electron-Phonon Superconductivity
This is a mechanism where electrons in a material pair up to form Cooper pairs, mediated by interactions with lattice vibrations (phonons). The conclusion suggests that localized Sr-Ca-Li metal flakes within the graphite adopt the phonon spectrum of the surrounding matrix, leading to this conventional superconductivity.
Type II Superconductors
This classification describes a type of superconductor where magnetic fields can partially penetrate the material in a mixed state between zero and full penetration. The study's observation of magnetization behavior characteristic of type II superconductors supports the idea that these transitions are due to conventional superconductivity.

Terminology

Summary

Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys reports experimental results indicating possible high-temperature superconductivity in graphite intercalation compounds synthesized with lithium-based alloys Temperature-dependent measurements of magnetization, trapped magnetic flux, and electrical resistance reveal transitions with critical temperatures (Tc) in the range of 240-350 K at ambient pressure, depending on intercalation metals and conditions. p. 0

Where the paper says it

M) Abstract: We report experimental results indicating possible high-temperature superconductivity in graphite intercalation compounds synthesized with lithium-based alloys. Temperature-dependent measurements of magnetization, trapped magnetic flux, and electrical resistance reveal transitions with critical temperatures (Tc) in the range of 240-350 K at ambient pressure, depending on intercalation metals and conditions.

The highest Tc values and largest high-Tc fractions (≲ 0. p. 0
Where the paper says it

Temperature-dependent measurements of magnetization, trapped magnetic flux, and electrical resistance reveal transitions with critical temperatures (Tc) in the range of 240-350 K at ambient pressure, depending on intercalation metals and conditions. The highest Tc values and largest high-Tc fractions (≲ 0.

1 %) were observed in graphite samples intercalated with ternary Sr-Ca-Li alloy. p. 0
Where the paper says it

The highest Tc values and largest high-Tc fractions (≲ 0. 1 %) were observed in graphite samples intercalated with ternary Sr-Ca-Li alloy.

Experimental Observations of High-Tc Transitions

The study focused on three types of samples obtained by intercalation of expanded graphite sheets (EG) with melts of pure Li metal, binary Ca-Li alloy, and ternary Sr-Ca-Li. For the binary Ca–Li alloy, temperature-dependent magnetization measurements showed a well-established superconducting transition near 11. p. 1

Where the paper says it

5) 623 1 Sample IIIa Sr-Ca-Li (1:1:20) 523 1 Sample IIIb Sr-Ca-Li (1:2:20) 623 1 Sample IIIc Sr-Ca-Li (1:2:20) 473 10 Sample IIId Sr-Ca-Li (1:2:20) 423 10 Temperature-dependent magnetization Figure 1 shows the temperature dependence of magnetization, m(T), for EG intercalated with binary Ca-Li alloy (Sample II) measured in zero-field cooling (ZFC) and field-cooling (FC) mode. It reflects a well-established superconducting transition near 11.

5 K and a high-Tc transition near 240 K. p. 2
Where the paper says it

a) low-Tc transition near 11. 5 K attributable to known superconductivity in CaC6 [21] or Ca2Li3C6 [20] , b) high-Tc transition near 240 K.

The ternary Sr–Ca–Li alloy exhibited high-Tc transitions at higher temperatures up to 350 K, with Sample IIIc showing a high-Tc transition near 350 K. p. 2
Where the paper says it

Compared to binary Ca–Li alloys, graphite samples intercalated with ternary Sr–Ca–Li alloys exhibited high-Tc transitions at higher temperatures up to 350 K (Fig. For instance, Sample IIIc exhibits a high-Tc transition near 350 K (Fig.

Mechanisms Supporting Superconductivity

The observed transitions are suggested to originate from local superconductivity rather than intrinsic magnetic properties of the intercalated graphite. Evidence supporting this includes:

  1. Temperature-dependent magnetization in zero-field cooling (ZFC) and field cooling (FC) mode indicating expulsion of applied magnetic field below Tc. p. 0

    Where the paper says it

    [23] In this study, we intercalated graphite with lithium-based alloys and observed high Tc transitions at temperatures up to 350 K in measurements of magnetization and magnetoresistance. The following features suggest that the observed transitions originate from local superconductivity rather than intrinsic magnetic properties of the intercalated graphite: 1) temperature-dependent magnetization in zero-field cooling (ZFC) and field cooling (FC) mode indicating expulsion of applied magnetic field below Tc (Meissner effect); 2) field-dependent magnetization characteristic for type II superconductors; 3) magnetic flux trapping and magnetic flux creep; 4) shift to lower temperatures and broadening of transitions with increasing magnetic field.

  2. Field-dependent magnetization characteristic for type II superconductors. p. 0

    Where the paper says it

    [23] In this study, we intercalated graphite with lithium-based alloys and observed high Tc transitions at temperatures up to 350 K in measurements of magnetization and magnetoresistance. The following features suggest that the observed transitions originate from local superconductivity rather than intrinsic magnetic properties of the intercalated graphite: 1) temperature-dependent magnetization in zero-field cooling (ZFC) and field cooling (FC) mode indicating expulsion of applied magnetic field below Tc (Meissner effect); 2) field-dependent magnetization characteristic for type II superconductors; 3) magnetic flux trapping and magnetic flux creep; 4) shift to lower temperatures and broadening of transitions with increasing magnetic field.

  3. Magnetic flux trapping and magnetic flux creep. p. 0

    Where the paper says it

    [23] In this study, we intercalated graphite with lithium-based alloys and observed high Tc transitions at temperatures up to 350 K in measurements of magnetization and magnetoresistance. The following features suggest that the observed transitions originate from local superconductivity rather than intrinsic magnetic properties of the intercalated graphite: 1) temperature-dependent magnetization in zero-field cooling (ZFC) and field cooling (FC) mode indicating expulsion of applied magnetic field below Tc (Meissner effect); 2) field-dependent magnetization characteristic for type II superconductors; 3) magnetic flux trapping and magnetic flux creep; 4) shift to lower temperatures and broadening of transitions with increasing magnetic field.

Magnetic Flux Trapping Analysis

The trapping of magnetic flux is investigated as an important hallmark of superconductivity. For the ternary Sr–Ca–Li alloy sample, the temperature dependence of the trapped magnetic moment, mtrap(T), showed a clear stepwise transition at approximately 270 K, which agrees with the high-Tc transition temperature. p. 3

Where the paper says it

The temperature dependence of the trapped magnetic moment, mtrap(T), induced by application and subsequent switching of a magnetic field of 1 T at 5. 2 K, shows a clear stepwise transition at approximately 270 K, which is in good agreement with the high-Tc transition temperature obtained in conventional temperature-dependent magnetization measurements of the same sample (Fig.

Furthermore, analysis of mtrap(T) behavior suggests that the induced magnetic moment is due to superconductivity rather than intrinsic magnetism. p. 3
Where the paper says it

3b), mtrap follows the initial trajectory, ending with a step at Tc  270 K. This observed behaviour suggests that the induced magnetic moment is due to superconductivity rather than intrinsic magnetism.

Magnetic Field Dependence and High-Tc Fraction

The magnetic field dependence of the high-Tc transition shows that Tc shifts to lower temperatures with increasing magnetic field, characteristic for superconductivity. The change in magnetization during the high-Tc transition exhibits a sharp initial increase and reaches a maximum at specific magnetic fields, indicating a mixed state typical of type-II superconductors. p. 4

Where the paper says it

5d, the change of magnetization during the high-Tc transition, m, exhibits a sharp initial increase and reaches a maximum at 0H  70 mT (H  C-layers) and 0H  100 mT (H⊥ C-layers), respectively. As the applied magnetic field is further increased, m decreases continuously and finally disappears.

The estimated high-Tc fraction is found to be ≲ 0. p. 6
Where the paper says it

[23] High-Tc fraction and resistivity To determine the high-Tc fraction in the intercalated graphite samples, we performed magnetization measurements using a superconducting lead reference sample with the same dimensions. From the ratio of slopes at the near-linear initial increase of m corresponding to the virgin curve of magnetization due to the Meissner effect as detailed in the SI, we estimated the high-Tc fraction f to be ≲ 0.

1% of the volume of the intercalated graphite samples. p. 1
Where the paper says it

Details on the intercalation methods and complementary results obtained with other samples are presented in the Supporting Information (SI), including highly oriented pyrolytic graphite (HOPG) and EG intercalated with other metals and alloys. The results obtained with HOPG were qualitatively similar but less pronounced, which may be due to the high surface-to-volume ratio of EG[24] , which favors rapid diffusion and intercalation.

Conclusion on Superconducting Origin

The experimental features, including magnetization behavior, magnetic flux trapping, and shift of the transition with magnetic field, speak against an intrinsic magnetic nature and for a superconducting origin of the observed high-Tc transitions. The paper concludes that localized nanoscale Sr-Ca-Li metal flakes/particles adopt the phonon spectrum of the surrounding graphite matrix, thereby generating conventional electron-phonon superconductivity in these particles at room temperature. p. 7

Where the paper says it

Moreover, an enhancement of conducting electron density is also expected to favour high-Tc superconductivity,[36] and our resistance measurements indicate that the conducting electron densities in the high-Tc samples intercalated with ternary Sr-Ca-Li alloy are higher than in non-superconducting graphite intercalated with Li metal only. A theoretical study based on the results and data of our experimental investigations suggests that localized nanoscale Sr-Ca-Li metal flakes/particles adopt the phonon spectrum of the surrounding graphite matrix, thereby generating conventional electron-phonon superconductivity in these particles at room temperature.

Ongoing experiments suggest that similar effects are observed in other intercalated systems. p. 7
Where the paper says it

Ongoing experiments show that the observed high-Tc transitions and signs of possible superconductivity are not limited to Ca-doped systems. Graphite samples intercalated by K–Li, Sr–Li, Mg–Li, Zn–Li, and Mg–Zn–Li alloys exhibit similar effects as presented in the SI (Fig.

References

[1] V. L. Ginzburg, “Once again about high-temperature superconductivity. p. 8

Where the paper says it

Submitted for Peer Review on 20 September 2025 References [1] V. Ginzburg, “Once again about high-temperature superconductivity.

” Contemp. p. 8
Where the paper says it

Ginzburg, “Once again about high-temperature superconductivity. ” Contemp.

Phys. 1992, 33, 15

[2] V. L. Ginzburg, “High-temperature superconductivity (history and general review). p. 8

Where the paper says it

1992, 33, 15. Ginzburg, “High-temperature superconductivity (history and general review).

” Sov. Phys. Usp. 1991, 34, 283

[3] N.W. Ashcroft, “Metallic Hydrogen: A High-Temperature Superconductor? p. 8

Where the paper says it

1991, 34, 283. Ashcroft, “Metallic Hydrogen: A High-Temperature Superconductor?

” Phys. Rev. Lett. 1968, 21, 1748

[4] N.W. Ashcroft, “Hydrogen Dominant Metallic Alloys: High Temperature Superconductors? p. 8

Where the paper says it

1968, 21, 1748. Ashcroft, “Hydrogen Dominant Metallic Alloys: High Temperature Superconductors?

” Phys. Rev. Lett. 2004, 92, 187002

[5] A. P. Drozdov, M. p. 0

Where the paper says it

Minkov*, Alexander P. Drozdov, Ulrich Pöschl, Mikhail I.

I. Eremets, I. p. 0
Where the paper says it

Drozdov, Ulrich Pöschl, Mikhail I. Eremets Max Planck Institute for Chemistry; Hahn-Meitner-Weg 1, 55128 Mainz, Germany E-mail: v.

A. Troyan, V. Ksenofontov, S. p. 0
Where the paper says it

Signs of Possible High-Temperature Superconductivity in Graphite Intercalated with Lithium-Based Alloys Vadim Ksenofontov*, Vasily S. Minkov*, Alexander P.

I. Shylin, “Conventional superconductivity at 203 K at high pressures. p. 8
Where the paper says it

Ksenofontov, S. Shylin, “Conventional superconductivity at 203 K at high pressures.

” Nature 2015, 525, 73

[6] A. P. Drozdov, P. p. 0

Where the paper says it

Minkov*, Alexander P. Drozdov, Ulrich Pöschl, Mikhail I.

P. Kong, V. S. Minkov, S. P. Besedin, M. p. 8
Where the paper says it

Drozdov, P. Besedin, M.

A. Kuzovnikov, S Mozaffari, L Balicas, F Balakirev, D Graf, V B Prakapenka E Greenberg D A Knyazev M Tkacz M I Eremets “Superconductivity at 250 K in lanthanum hydride under high pressures. p. 8
Where the paper says it

Knyazev, M. Eremets, “Superconductivity at 250 K in lanthanum hydride under high pressures.

” Nature 2019, 569, 528

[7] M. Somayazulu, M Ahart, A. p. 8

Where the paper says it

” Nature 2019, 569, 528. Somayazulu, M.

K Mishra, ZM Geballe M Baldini Y Meng V V Struzhkin and R J Hemley “Evidence for superconductivity above 260 K in Lanthanum superhydride at megabar pressures. p. 8
Where the paper says it

Struzhkin, and R. Hemley, “Evidence for superconductivity above 260 K in Lanthanum superhydride at megabar pressures.

” Phys. Rev. Lett. 2019, 122, 027001

[8] M L Cohen “Superconductivity in modified semiconductors and the path to higher transition temperatures.” Supercond. p. 8

Where the paper says it

Cohen, “Superconductivity in modified semiconductors and the path to higher transition temperatures. ” Supercond.

Sci. Technol. 2015, 28, 043001

[9] A Bhaumik R Sachan S Gupta J Narayan “Discovery of High-Temperature Superconductivity (Tc = 55 K) in B‑Doped Q‑Carbon.” ACS Nano 2017, 11 (12), 11915

[10] K Tanigaki T W Ebbesen S Saito J Mizuki J S Tsai Y Kubo and S Kuroshima “Superconductivity at 33 K in CsxRbyC60.” Nature 1991, 352, 222

[11] Y.-L Hai M.-J Jiang H.-L Tian G.-H Zhong W.-J Li C.-L Yang X.-J Chen and H-Q Lin “Superconductivity Above 100 K Predicted in Carbon-Cage Network” Adv. p. 9

Where the paper says it

Chen, and H. Lin, “Superconductivity Above 100 K Predicted in Carbon-Cage Network” Adv.

Sci. 2023, 10, 2303639

[12] T Scheike P Esquinazi A Setzer W Böhlmann “Granular superconductivity at room temperature in bulk highly oriented pyrolytic graphite samples.” Carbon, 2013, 59, 140

[13] P Esquinazi “Invited review: Graphite and its hidden superconductivity.” Pap. Phys. 2013, 5, 050007

[14] A Champi C E Precker and P D Esquinazi Hints of granular superconductivity in natural graphite verified by trapped flux transport measurements New J. Phys. 2023, 25, 093029

[15] Y V Kopelevich J H S Torres R Ricardo da Silva M C Diamantini C A Trugenbergerand V M Vinokur Global room-temperature superconductivity in graphite Adv. Quantum Technol. p. 9

Where the paper says it

Vinokur, "Global room-temperature superconductivity in graphite", Adv. Quantum Technol.

2023, 2300230

[16] M Núñez-Regueiro T Devillers E Beaugnon A de Marles T Crozes S Pairis C Swale H Klein O Leynaud A Hadj-Azzem F Gay D Dufeu “Magnetic field sorting of superconducting graphite particles with T>400K.” arXiv:2410. p. 9

Where the paper says it

Dufeu, “Magnetic field sorting of superconducting graphite particles with T>400K. ” arXiv:2410.

18020

[17] T Han Z Lu Z Hadjri L Shi Z Wu W Xu Y Yao A A Cotten O S Sedeh H Weldeyesus J Yang J Seo S Ye M Zhou H Liu G Shi Z Hua K Watanabe T Taniguchi P Xiong D M Zumbühl L Fu & L Ju “Signatures of chiral superconductivity in rhombohedral graphene.” Nature 2025, 643,654

[18] T Enoki M Suzuki and M Endo “Graphite Intercalation Compounds and Applications” Oxford University Press, New York, 2003

[19] N Emery C Hérold M d’Astuto V Garcia Ch Bellin J F Marêché P Lagrange and G Loupias “Superconductivity of Bulk CaC6.” Phys. Rev. Lett. 2005, 95, 087003

[20] N Emery C Herold J-F Mareche C Bellouard G Loupias P Lagrange “Superconductivity in Li3Ca2C6 intercalated graphite” J. of Solid State Chem. p. 9

Where the paper says it

Lagrange, “Superconductivity in Li3Ca2C6 intercalated graphite” J. of Solid State Chem.

2006, 179, 1289

[21] I I Mazin L Boeri O V Dolgov A A Golubov G B Bachelet M Giantomassi O K Andersen “Unresolved problems in superconductivity of CaC6.” Phys. C: Supercond. p. 8

Where the paper says it

Cohen, “Superconductivity in modified semiconductors and the path to higher transition temperatures. ” Supercond.

Appl. 2007, 460–462, 116

[22] I I Mazin “Intercalant-Driven Superconductivity in YbC6 and CaC6.” Phys. Rev. Lett. 2005, 95, 227001

[23] V S Minkov V Ksenofontov M I Eremets “Possible High-Temperature Superconductivity in Graphite Intercalated with Calcium-Ammonia Solutions.” https://doi. p. 9

Where the paper says it

Eremets, “Possible High-Temperature Superconductivity in Graphite Intercalated with Calcium-Ammonia Solutions. ” https://doi.

org/10.5281/zenodo. p. 9
Where the paper says it

” https://doi. 5281/zenodo.

17231105

[24] M Wissler “Graphite and carbon powders for electrochemical applications.” J. Power Sources 2006, 156, 142

[41] M I Eremets V S Minkov P P Kong A P Drozdov S Chariton V B Prakapenka “Universal diamond edge Raman scale to 0.5 terapascal and implications for the metallization of hydrogen” Nat. p. 3

Where the paper says it

Trapped magnetic flux The high-Tc transitions detected by temperature-dependent magnetization measurements may be attributable to magnetic or superconducting properties of the investigated samples. To elucidate the physical mechanism, we investigated the trapping of magnetic flux as an important hallmark of superconductivity[26,27] , which was effective in the probing of high-temperature superconductivity in hydrogen-rich compounds under high pressure[28] and other superconductors at atmospheric pressure.

Commun. 2023, 14, 907

[42] A Sadezky H Muckenhuber H Grothe R Niessner U Pöschl Raman microspectroscopy of soot and related carbonaceous materials: Spectral analysis and structural information Carbon 2005, 43, 1731

[43] T Latychevskaia S.-K Son Y Yang D Chancellor M Brown S Ozdemir I Madan G e Berruto F Carbone A Mishchenko K Novoselov “Stacking transition in rhombohedral graphite” Front. p. 0

Where the paper says it

[16] Superconducting transitions below 0. 5 K have been observed in rhombohedral tetra- and penta-layer graphene,[17] while higher transition temperatures can be achieved in graphite intercalated with alkali or alkaline-earth metals and other species.

Phys. 2019, 14(1), 13608

[44] C W Bale A D Pelton “The Ca−Li (Calcium-Lithium) system” JPE 1987, 8, 125

[45] C W Bale A D Pelton “The Li-Sr (Lithium-Strontium) system” Bull. Alloy Phase Diagr. p. 2

Where the paper says it

Like calcium, strontium can form a SrC6 phase with a significantly lower superconducting Tc of 1. [25] In a graphite sample intercalated with ternary Sr-Ca-Li alloy (Sample IIIa), we did not observe a low-Tc superconducting transition above the experimental lower limit of 5 K (Fig.

p. 2
Where the paper says it

Like calcium, strontium can form a SrC6 phase with a significantly lower superconducting Tc of 1. [25] In a graphite sample intercalated with ternary Sr-Ca-Li alloy (Sample IIIa), we did not observe a low-Tc superconducting transition above the experimental lower limit of 5 K (Fig.

1989, 10, 278

[46] A A Nayeb-Hashemi J B Clark A D Pelton “The Li-Mg (Lithium-Magnesium) System” Bull. Alloy Phase Diagr. 1984, 5, 365

[47] H Okamoto “Li-Zn (Lithium-Zinc)” J. Phase Equilib. p. 1

Where the paper says it

It reflects a well-established superconducting transition near 11. 5 K, which can be attributed to a lowtemperature superconducting phase of CaC6 [21] or Ca2Li3C6 [20] (low-Tc transition, Fig.

Diffus. 2012, 33, 345

Supporting Information Details

The supporting information details the measurement methods used for magnetic susceptibility and electrical resistance measurements. The synthesis involved melting doping metals and lithium at temperatures ranging from 423 K to 723 K. p. 1

Where the paper says it

The results obtained with HOPG were qualitatively similar but less pronounced, which may be due to the high surface-to-volume ratio of EG[24] , which favors rapid diffusion and intercalation. Metals/alloys (molar ratios), reaction temperatures, and reaction times applied in the synthesis of the EG intercalation samples presented and discussed in the main text.

Intercalation proceeded differently with different types of graphite, with EG being efficiently intercalated in seconds to minutes. p. 1
Where the paper says it

alloys at temperatures in the range of 423 K to 623 K over a period of one to ten minutes as specified in Table 1. Details on the intercalation methods and complementary results obtained with other samples are presented in the Supporting Information (SI), including highly oriented pyrolytic graphite (HOPG) and EG intercalated with other metals and alloys.

Sample Characterization

Energy dispersive X-ray analysis confirmed the high purity of both graphite starting materials. The crystalline structure of HOPG is hexagonal, whereas EG shows coexistence of both hexagonal and rhombohedral phases in relative amounts of ~ 60% and ~ 40%. Raman spectroscopy confirmed the presence of the hexagonal and rhombohedral phases in EG. p. 7

Where the paper says it

[34] Theoretical studies forecast that interfaces between rhombohedral graphite and hexagonal graphite (Bernal graphite) are especially promising for high-Tc superconductivity due to flat bands at the Fermi energy. [35-39] X-ray powder diffraction confirmed the presence of the hexagonal and rhombohedral phases of the EG used in our study (Fig.

Energy dispersive X-ray analysis revealed impurities of phosphorus and sulfur in EG, likely from the technological process of compacting the expanded graphite. p. 7
Where the paper says it

[34] Theoretical studies forecast that interfaces between rhombohedral graphite and hexagonal graphite (Bernal graphite) are especially promising for high-Tc superconductivity due to flat bands at the Fermi energy. [35-39] X-ray powder diffraction confirmed the presence of the hexagonal and rhombohedral phases of the EG used in our study (Fig.

Synthesis Procedures

Intercalations were carried out in a stainless-steel crucible heated by a custom-designed miniature furnace under an inert argon atmosphere inside a glovebox. The intercalation time was varied from 5 seconds to several days, after which the samples were removed from the melt and allowed to cool to room temperature. p. 1

Where the paper says it

Overall, the samples obtained with binary Ca-Li alloys exhibited high-Tc transitions in the range of 240 K to 265 K (Fig. The ratio between high-Tc and low-Tc transition signals varied significantly with intercalation temperature, time, and proportion of Ca in the Ca–Li alloys, indicating that the highTc transition is not related to the low-Tc phase.

The preparation of doping alloys and subsequent intercalation was done the same way as for Sr-Ca-Li alloys. p. 0
Where the paper says it

minkov@mpic. M) Abstract: We report experimental results indicating possible high-temperature superconductivity in graphite intercalation compounds synthesized with lithium-based alloys.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced transition mechanism identification: The improved system can analyze magnetization data to distinguish between local superconductivity and intrinsic magnetic properties by detecting features such as magnetization m(T) in zero-field cooling (ZFC) and field cooling (FC) mode indicating expulsion of applied magnetic field below Tc (Meissner effect) and magnetic flux trapping.

  2. Optimized material screening: The system can predict the optimal intercalation materials by correlating observed critical temperatures with specific alloy compositions, such as noting that The highest Tc values and largest high-Tc fractions were observed in graphite samples intercalated with ternary Sr-Ca-Li alloy.

  3. Advanced phase diagram modeling: The improved AI can model the complex interplay between different superconducting phases, specifically assessing how co-intercalation affects transitions, as seen when co-intercalation with Sr suppresses the formation of the CaC6 phase and may increase the amount of intercalated Ca in the graphite.

  4. Magnetic field effect quantification: The system can accurately quantify the strong field dependence of transition temperatures by fitting data to models like Tc(H) = P1 times tanh(H times P2) + P3, revealing that The magnetic field dependence of Tc demonstrates a similar trend: it is strong below and saturates above 0.3 T.

  5. Resistivity anomaly detection: The system can detect subtle changes in resistivity that suggest high-Tc fractions, noting that At 350 K, however, the resistivity difference measured at 5 T was by a factor of 5 higher than the noise level, which is correlated with the high-Tc transition as indicated by the trapped flux behavior of the Sample IIId at about 350 K.

Abstract

We report experimental results indicating possible high-temperature superconductivity in graphite intercalation compounds synthesized with lithium-based alloys. Temperature-dependent measurements of magnetic moment, trapped magnetic flux, and electrical resistance reveal transitions with critical temperatures (Tc) in the range of 240-350 K at ambient pressure, depending on the intercalation metals and synthesis conditions. The highest Tc values and largest high-Tc volume fractions (< 0.1 %) were observed in graphite samples intercalated with ternary Sr-Ca-Li alloy. Our results and analyses suggest that the observed transitions originate from local superconductivity rather than intrinsic magnetic properties of the intercalated graphite, which may be an alternative explanation. Accordingly, we propose and intend to pursue further investigations to test and confirm the nature of the observed high-Tc transitions, and to obtain larger high-Tc fractions by optimizing the intercalation materials and synthesis methods.

Sources

Related papers