Event-Based Control via Sparsity-Promoting Regularization: A Rollout Approach with Performance Guarantees

arXiv:2509.24799 · eess.SY, cs.SY · Submitted 2025-09-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Event-Based Control via Sparsity-Promoting Regularization".

Dev: Here's the gist of the paper. Event-Based Control via Sparsity-Promoting Regularization: A Rollout Approach with Performance Guarantees presents a controller design framework aiming to balance control performance and actuation rate through sparsity-promoting regularization The effectiveness of the proposed method was demonstrated through a numerical example Problem Formulation The paper considers a discrete-time linear system where the control input is set to zero at all other time steps, represented by a binary variable δk The objective is to design policies µu and µδ to balance the trade-off between control performance, measured by the average quadratic cost J ac(µu, µδ), and the average actuation rate J ar(µδ) This co-design problem is formulated as min µu, µδ J a(µu, µδ) = J a c(µu, µδ) + θJ ar(µδ) s.t.

Rosa: uk = 0 if δk = 0 Rollout Algorithm Design To handle the combinatorial nature of the problem, a rollout algorithm is employed as an approximation technique This sequential optimization method optimizes control laws and scheduling decisions over a finite horizon using a receding-horizon approach The process involves solving an h-step lookahead minimization problem repeatedly every h steps to obtain the triggering policies µδ k and corresponding control policies µu k Performance Guarantees The proposed algorithm establishes theoretical performance guarantees with respect to periodic control and proves the stability of the closed-loop system Theorem 1 shows that J a(µu,ro, µδ,ro) ≤ J a(µu,per, µδ,per) + 1/h Furthermore, the closed-loop system under the policy obtained by Algorithm 1 is meansquare stable Numerical Demonstration A numerical example demonstrates the effectiveness of the proposed method, showing advantages over periodic strategies and l1-relaxed approximation of group sparsity The simulation results show that the proposed algorithm achieves lower control costs for all θ compared to periodic control, while maintaining nearly the same average actuation rate The paper successfully developed a rollout-based framework for sparse intermittent actuation, establishing both performance and stability guarantees The proposed method provides a superior trade-off compared to other approaches in the numerical example Pruning redundant reasoning tokens The authors address limitations in existing research by jointly optimizing discrete actuation timings and continuous control laws, providing provable performance guarantees This is achieved by employing the rollout algorithm as a sequential optimization method in the context of dynamic programming How the training signal is built The value function V d k(Ik) is approximated using a given base policy, and a suboptimal policy is obtained through an iterative procedure The rollout method replaces V d k+h in the Bellman equation with V tilde d k+h, which reduces the problem to an h-step lookahead minimization Where the gains come from The performance guarantee is derived by showing that J a(µu,ro, µδ,ro) ≤ J a(µu,per, µδ,per) + 1/h This inequality holds because Algorithm 1 executes only at sparse time instants when h is sufficiently large The stability result relies on the ergodicity of the Markov chain induced by the policies, which is established through Lemmas 7, 8, and 9 Where the gains come from

Title and authors: Rosa: So we're looking at this paper, "Event-Based Control via Sparsity-Promoting Regularization: A Rollout Approach with Performance Guarantees," by Shumpei Nishida and Kunihisa Okano. The title itself tells you a lot about what they're trying to do here.

Dev: Yeah, it sounds like they’re trying to figure out how to balance two things: getting good control performance while keeping the system's actuation rate low. That’s the core problem they tackle with this paper.

Rosa: Exactly, and the way they frame it is through sparsity promoting regularization. They are penalizing the number of control actions taken, which means they want a system that stays quiet most of the time, right?

Dev: Right. And because this whole problem has a combinatorial nature—which means there are too many possible combinations for when to act—they aren't trying to solve it all at once. They’re using a rollout algorithm as an approximation technique instead.

Rosa: A rollout algorithm, so they sequence the decisions over time, looking ahead and making choices step by step. It sounds like they are trying to find a practical way around that huge combinatorial problem.

Dev: And what's interesting is that they don't just stop there; they aim for theoretical performance guarantees with respect to periodic control and prove the stability of the closed-loop system under this new policy.

Rosa: That’s a big deal, because proving stability and performance isn't always straightforward when you introduce these kinds of timing decisions. It means their approach is robust enough to work in real-world scenarios where you need reliability.

Dev: So, essentially, they are taking a complex control problem and using this rollout method to find a good compromise between how well the system performs and how often it has to move things. And then they show that this compromise is stable.

The paper's summary: Rosa: Now, let’s look at the actual summary of "Event-Based Control via Sparsity-Promoting Regularization: A Rollout Approach with Performance Guarantees." They start by saying they consider a discrete time linear system where the control input is zero at all time steps except for certain events.

Dev: They define this using a binary variable, let's call it delta k, which is one if there's an actuation at time step k and zero otherwise. Then their objective is to minimize the average quadratic cost of control performance, which they call J ac of mu u and mu delta, while also penalizing the average actuation rate.

Rosa: They formalize this as a minimization problem where they have to choose both the control laws, mu u, and these actuation decisions, mu delta. The constraint is pretty specific: the state at time k must be zero if there's no actuation at that time step.

Dev: Then they move into Section Three and describe their proposed rollout-based algorithm. They use a receding horizon approach to find the triggering policies for the actuation timings, called mu delta k, and then compute the corresponding control policies for mu u k online.

Rosa: That sequential optimization method is key—they solve an h step lookahead minimization problem repeatedly every h steps to get these decisions. It’s a way to handle that combinatorial explosion by breaking it down into manageable stages.

Dev: And they tie this back to the theory by showing how the value function V d k for the original problem is approximated using a given base policy, and a suboptimal policy comes from an iterative procedure where they replace something in the Bellman equation with something else.

Rosa: It sounds like they're basically using this rollout method as a sequential optimization technique within dynamic programming to find an approximate solution. And that’s how they get their tractable suboptimal solution for the average cost minimization problem (seven) <ref:2509.24799#pg1>.

The paper's improvements: Dev: So what are the actual improvements they propose over what was there before? They focus on joint optimization, which is a big step because usually you optimize control and timing separately.

Rosa: They explicitly address the limitation of existing research by jointly optimizing these discrete actuation timings and continuous control laws. That’s the main gain here—getting them to work together optimally.

Dev: This joint optimization is what allows them to provide provable performance guarantees with respect to periodic control, which is something that's hard to achieve in other sparse control papers.

Rosa: They establish a specific performance guarantee: the cost J ac of mu u, ro, mu delta, ro is less than or equal to the cost J ac of mu u, per, mu delta, per plus one over h. That inequality is pretty concrete.

Dev: And because they execute only at sparse time instants when h is sufficiently large and they are using this rollout approach as Algorithm one the stability result relies on the ergodicity of the Markov chain induced by those policies <ref:2509.24799#pg1>.

Rosa: So, what this means for us in practice is that we can achieve a performance guarantee with respect to periodic control while maintaining nearly the same average actuation rate as periodic control.

Conclusion: Rosa: Alright, wrapping things up on "Event-Based Control via Sparsity-Promoting Regularization: A Rollout Approach with Performance Guarantees." The main thing is that they’ve developed a rollout-based framework for sparse intermittent actuation.

Dev: They successfully established both performance and stability guarantees, which is a major addition to the field of intermittent control. Their numerical demonstration showed advantages over periodic strategies and l1 relaxed approximation of group sparsity.

Rosa: So, the implication is that this method provides a superior trade-off compared to other approaches we've seen, especially in terms of achieving lower control costs for all weighting parameters theta when compared to periodic control.

Dev: It’s a solid framework because it tackles the combinatorial nature of the problem with a sequential optimization method and gives us concrete results on how this works in practice.

Rosa: I think what this paper really means is that we can finally build AI systems that achieve control objectives with limited resource usage by enabling sparse signals that remain zero over most of the time horizon.

Dev: And because they proved stability, we have a much stronger foundation to trust these intermittent control policies in applications like railways and electric vehicles where power consumption matters.

Taro: From my side, I'm interested in how this system behaves when the world misbehaves. I wonder what happens when the environment suddenly changes dramatically, and how gracefully this rollout approach recovers from that unexpected shift.

Rosa: That’s a good point, Taro. We need to keep looking at those failure modes because we can't rely on perfect predictions in any real-world setting where things are dynamic.

Dev: And that’s what the stability proof is for—it guarantees it won't just work fine under ideal conditions, but it will remain stable even when things get messy.

Ritsumeikan University

eess.SY, cs.SY

Submitted: 2025-09-29

Updated: 2026-11-10

Comments: 15 pages. Published in ACC 2026

Journal ref: Proceedings of the 2026 American Control Conference (ACC), pp. 4590-4595, 2026

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 78/100

The gist: Event-Based Control via Sparsity-Promoting Regularization: A Rollout Approach with Performance Guarantees presents a controller design framework aiming to balance control performance and actuation…

Key concepts

Sparsity-Promoting Regularization
This technique encourages the controller to use only a few control actions at any given time, keeping most inputs zero. This is useful because it allows AI systems to use limited resources efficiently by reducing power consumption in applications like trains or electric cars.
Rollout Algorithm
This is an approximation method used to solve a complex optimization problem. Instead of solving the entire long-term problem at once, it looks ahead for a short time step (horizon) and makes the best decision based on that lookahead, repeating this process over time.
Co-design Problem
The goal is to simultaneously design two things: the continuous control law (how much to act) and the discrete timing decisions (when to act). The system minimizes a combined cost function that balances how well it controls the system against how often it acts.
Performance Guarantees
The authors prove mathematically that their method works reliably. They show that the resulting control cost is bounded relative to a simpler, periodic control strategy, and they prove the closed-loop system remains stable under their chosen policies.

Terminology

Summary

Event-Based Control via Sparsity-Promoting Regularization: A Rollout Approach with Performance Guarantees presents a controller design framework aiming to balance control performance and actuation rate through sparsity-promoting regularization The effectiveness of the proposed method was demonstrated through a numerical example

Problem Formulation

The paper considers a discrete-time linear system where the control input is set to zero at all other time steps, represented by a binary variable δk The objective is to design policies µu and µδ to balance the trade-off between control performance, measured by the average quadratic cost J ac(µu, µδ), and the average actuation rate J ar(µδ) This co-design problem is formulated as min µu, µδ J a(µu, µδ) = J a c(µu, µδ) + θJ ar(µδ) s.t. uk = 0 if δk = 0

Rollout Algorithm Design

To handle the combinatorial nature of the problem, a rollout algorithm is employed as an approximation technique This sequential optimization method optimizes control laws and scheduling decisions over a finite horizon using a receding-horizon approach The process involves solving an h-step lookahead minimization problem repeatedly every h steps to obtain the triggering policies µδ k and corresponding control policies µu k

Performance Guarantees

The proposed algorithm establishes theoretical performance guarantees with respect to periodic control and proves the stability of the closed-loop system Theorem 1 shows that J a(µu,ro, µδ,ro) ≤ J a(µu,per, µδ,per) + 1/h Furthermore, the closed-loop system under the policy obtained by Algorithm 1 is meansquare stable

Numerical Demonstration

A numerical example demonstrates the effectiveness of the proposed method, showing advantages over periodic strategies and l1-relaxed approximation of group sparsity The simulation results show that the proposed algorithm achieves lower control costs for all θ compared to periodic control, while maintaining nearly the same average actuation rate

Conclusion

The paper successfully developed a rollout-based framework for sparse intermittent actuation, establishing both performance and stability guarantees The proposed method provides a superior trade-off compared to other approaches in the numerical example

Pruning redundant reasoning tokens

The authors address limitations in existing research by jointly optimizing discrete actuation timings and continuous control laws, providing provable performance guarantees This is achieved by employing the rollout algorithm as a sequential optimization method in the context of dynamic programming

How the training signal is built

The value function V d k(Ik) is approximated using a given base policy, and a suboptimal policy is obtained through an iterative procedure The rollout method replaces V d k+h in the Bellman equation with V tilde d k+h, which reduces the problem to an h-step lookahead minimization

Where the gains come from

The performance guarantee is derived by showing that J a(µu,ro, µδ,ro) ≤ J a(µu,per, µδ,per) + 1/h This inequality holds because Algorithm 1 executes only at sparse time instants when h is sufficiently large The stability result relies on the ergodicity of the Markov chain induced by the policies, which is established through Lemmas 7, 8, and 9

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI systems can achieve control objectives with limited resource usage by enabling sparse signals that remain zero over most of the time horizon, which reduces power consumption in applications like railways and electric vehicles.

  2. The improved system can balance control performance and actuation rate by formulating a co-design problem that minimizes the average control performance cost while penalizing the average actuation rate with a weighting parameter theta.

  3. The rollout-based algorithm allows for the determination of actuation timings through a multistage minimization procedure based on a receding horizon approach, enabling online computation of corresponding control inputs to obtain tractable suboptimal solutions.

  4. The system can provide theoretical performance guarantees with respect to periodic control and prove the stability of the closed-loop system under the policy obtained by Algorithm 1, which ensures mean-square stability of the closed-loop system.

  5. The proposed algorithm can achieve a performance guarantee with respect to periodic control, showing that J a (µ u,ro, µδ,ro) ≤ J a (µ u,per, µδ,per) + 1/h.

  6. The improved system can maintain nearly the same average actuation rate as periodic control while achieving lower control costs for all weighting parameters theta when compared to other methods.

Related papers