Bi-VLA: Bilateral Control-Based Imitation Learning via Vision-Language Fusion for Action Generation

arXiv:2509.18865 · cs.RO, cs.LG · Submitted 2025-09-23 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Bi-VLA: Bilateral Control-Based Imitation Learning via Vision-Language Fusion for Action Generation".

Paper summary: Rosa: So we're looking at this paper called Bi-VLA: Bilateral Control-Based Imitation Learning via Vision-Language Fusion for Action Generation. Basically, they've taken bilateral control—that way where robots exchange position and torque information—and tried to make it handle more than one task with just one model.

Dev: That sounds like a big deal for the general usability of these systems, Rosa. What’s the core claim here about what this Bi-VLA framework actually does?

Rosa: The thesis is that they unify robot joint angle, velocity, and torque data from that bilateral control system with visual features and natural language instructions using SigLIP embeddings and FiLM feature fusion. This creates a shared representation of vision and language that matches the robot's state information.

Taro: So it's not just combining things; it's about aligning the text commands, which are encoded by SigLIP, with what the robot is seeing and doing through those visual features modulated by FiLM. That sounds like they are trying to build a really grounded understanding of instructions.

Rosa: Exactly. The main contribution they make is showing that this setup lets a single model perform multiple tasks without needing to retrain it or manually pick which model to use for each job. They validated this on two different task types, one that needed extra language cues and another one you could tell just by looking at the vision.

Dev: That’s interesting because most prior bilateral approaches were stuck with having a separate model for every single manipulation task, which limits how general they are. So they claim to overcome that single-task limitation inherent in those older methods.

Taro: I'm curious about those results on the Two-Target Task and the Two-Source Task. What kind of success rates did Bi-VLA actually get in those experiments?

Rosa: For the Two-Target Task, using SigLIP, Bi-VLA achieved an overall success rate of ninety percent across both the "Up" and "Down" conditions. And for the Two-Source Task, it also maintained a ninety percent overall success rate when using SigLIP.

Dev: Ninety percent is solid for real-world robot tasks, especially when you’re dealing with vision and language input at the same time. But I wonder what happens if the world misbehaves during those tests, like if the visual input isn't perfect or a command is slightly ambiguous?

Taro: That’s where I get interested. The paper mentions that they found two consistent findings across all evaluations. First, Bi-VLA with SigLIP shows a reliable way to resolve Up or Down ambiguity when there are language cues, getting near-perfect execution for the "Down" command while still performing robustly on the "Up" case.

Rosa: That ability to handle that linguistic ambiguity is key because it means the model isn't just blindly following a command; it’s using the context of what it sees and what you say to figure out which action you really mean.

Dev: And second, they found that Bi-VLA with SigLIP Mix shows strong multitask generalization and low-data generalization. It kept balanced success rates in the language-disambiguable task and even performed competitively under unlearned three ball conditions.

Taro: So it sounds like the combination of high fidelity for linguistic grounding, robustness in vision tasks, and that ability to generalize across multiple tasks with minimal data is what makes this framework useful.

Rosa: Right. The conclusion is that Bi-VLA integrates robot joint angle, velocity, and torque data with visual and language modalities to let one policy handle multiple tasks flexibly. It uses FiLM-based vision-language fusion and SigLIP embeddings to achieve this without needing retraining or manual model selection.

Dev: So what does this mean for the practical application of these robots? It seems like they can be deployed in a more flexible setting where they don't need a custom setup for every single manipulation scenario.

Rosa: It suggests that we can move toward more versatile service robots that learn to adapt their behavior based on both what they see and what we instruct them to do, all within the same learning structure.

Taro: I just wonder about the limitations mentioned in the paper. Since it's real-world validation, where does this approach stop working gracefully when things get really unexpected or complex?

Dev: The paper did flag that they are focused on vision-language combinations and robot state information, so its strength lies there, but it doesn't necessarily cover every kind of physical interaction out there.

Rosa: That’s fair. So the Bi-VLA framework shows a path for scalable multimodal imitation learning by proving we can combine these different data streams effectively to build more adaptable policies.

Conclusion: Rosa: So we’re talking about Bi-VLA, which is this new framework they proposed for imitation learning using bilateral control and vision language fusion.

Dev: Yeah, it’s about taking that old way of doing things—bilateral control where robots swap joint angles and torque data—and adding vision and language to it.

Taro: The paper shows how this lets a single robot model handle multiple different tasks without needing to retrain anything or pick a specific model for each job.

Rosa: It’s about unifying that robot state information with those visual features and natural language instructions using specific techniques called SigLIP and FiLM fusion.

Dev: So, it’s not just mixing data; they are creating this shared representation so the vision and the language both understand what the robot is doing.

Taro: They validated this by testing it on two tasks: one that needed extra language cues, and another one that was distinguishable only by what you could see.

Rosa: And their results were pretty solid for those tests; they got ninety percent success rates in both situations when using the SigLIP setup.

Dev: That ninety percent is interesting because it’s comparable to what separate models had achieved on their own, which suggests the combination actually helped.

Taro: What they found was that this setup handles language ambiguity really well when there are words involved, like figuring out which way to move when you hear a command.

Rosa: Right, they noted that the system could reliably figure out if you meant "Up" or "Down" depending on the language cues provided.

Dev: And for the more general vision tasks, they found it was robust enough to keep performance steady even under less perfect visual conditions.

Taro: They also showed that when they used a slightly modified version, Bi-VLA with SigLIP Mix, it stayed good across different tasks and even performed well on some harder scenarios.

Rosa: So the main thing is that this framework lets robots be much more versatile in real-world settings by blending what they see with what we say to them.

Dev: It’s a big step toward building systems that can adapt to a wider variety of manipulation goals without needing a completely new setup every time.

Taro: We saw how this system handles the ambiguity between two different commands, which is something you definitely want to see in practical applications.

Rosa: This work really shows how combining vision and language with robot movement data can make imitation learning much more flexible than before.

Masato Kobayashi, Thanpimon Buamanee

The University of Osaka · Kobe University

cs.RO, cs.LG

Submitted: 2025-09-23

Updated: 2025-09-23

Journal ref: IEEE International Conference on Advanced Robotics and its Social Impacts (ARSO), Vienna, Austria, 2026, pp. 225-230

DOI: 10.1109/ARSO68304.2026.11536111

Project page: https://mertcookimg.github.io/bi-vla

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 76/100

The gist: Bi-VLA proposes a novel framework that extends bilateral control-based imitation learning to handle more than one task within a single model because it unifies robot joint angle, velocity…

Key concepts

Bilateral Control
This method involves two robots, a leader and a follower, continuously exchanging position and torque information. It is used to collect rich data because the demonstrator can feel contact forces directly. This provides richer demonstrations than unilateral control alone, improving the robot's ability to handle objects with different weights and hardness.
SigLIP
SigLIP is a technique used to encode natural language instructions into embeddings that capture semantic meaning. In this paper, it is used to process the textual commands from the bilateral control system. These text embeddings are then fused with visual features to create a shared representation for the model.
FiLM
FiLM stands for Feature-wise Linear Modulation. It is a technique used here to fuse visual features extracted by EfficientNet with language embeddings. FiLM allows the model to adapt its visual processing based on the linguistic input, creating a unified representation that aligns vision and language information.

Terminology

Summary

Bi-VLA proposes a novel framework that extends bilateral control-based imitation learning to handle more than one task within a single model because it unifies robot joint angle, velocity, and torque data from bilateral control with visual and language features. p. 0 This framework overcomes the single-task limitation of prior bilateral approaches by enabling a single model to perform multiple tasks without retraining or manual model selection. p. 1

Framework Proposal

Bi-VLA is designed to fuse vision and language features into a unified representation leveraging SigLIP-based text embeddings and FiLM-based EfficientNet feature fusion. This design allows the model to learn a shared representation of vision and language aligned with robot state information. p. 1 The main contributions include proposing Bi-VLA, demonstrating that it enables a single model to perform multiple tasks, and validating it through real-robot experiments on two distinct tasks. p. 1

Data Collection and Learning Model

Data were collected using a four-channel bilateral control system where the leader and follower robots continuously exchanged position and torque information. The multimodal dataset includes robot joint data (angle, velocity, and torque), RGB images from both overhead and gripper-mounted cameras, and natural language instructions recorded during bilateral control. p. 2 The learning model is implemented using a Transformer-driven Conditional Variational Autoencoder (CVAE). p. 2 Textual commands are encoded using SigLIP, and these embeddings are fused with visual features extracted by EfficientNet through FiLM-based modulation. p. 2

Experimental Validation

The framework was validated on two task types: one requiring supplementary language cues and another distinguishable solely by vision. In the Two-Target Task, Bi-VLA (SigLIP) achieved an overall success rate of 90% across both "Up and Down" conditions. For the Two-Source Task, Bi-VLA (SigLIP) maintained a 90% overall success rate, comparable to the task-specific SigLIP model. p. 5

Key Findings and Discussion

Two consistent findings emerged across all evaluations: first, Bi-VLA (SigLIP) demonstrates reliable resolution of Up/Down ambiguity in language-dependent settings, achieving near-perfect execution for the “Down” command while preserving robust performance in the “Up” case. Second, Bi-VLA (SigLIP-Mix) exhibits strong multitask and low-data generalization, maintaining balanced success rates in the language-disambiguable task and achieving competitive performance under unlearned 3-ball conditions. p. 6 These results highlight the strengths of Bi-VLA: high-fidelity grounding of linguistic instructions, robustness in vision-based tasks, and the ability to generalize across multiple tasks with minimal data. p. 6

Conclusions

In summary, Bi-VLA integrates robot joint angle, velocity, and torque data with visual and language modalities to enable a single policy to perform multiple tasks flexibly. This approach overcomes the single-task limitation of prior methods by leveraging FiLM-based vision-language fusion and SigLIP-based language embeddings. p. 0 Real-robot experiments confirmed its effectiveness in both vision- and language-dependent scenarios, positioning Bi-VLA as a promising framework for scalable multimodal imitation learning. p. 7 Future work will extend the framework to more complex multi-step manipulations and diverse object categories. p. 7

REFERENCES

Bi-VLA: Bilateral Control-Based Imitation Learning via Vision-Language Fusion for Action Generation

--- Page 1 ---

Bi-VLA: Bilateral Control-Based Imitation Learning via Vision-Language Fusion for Action Generation

Abstract— We propose Bilateral Control-Based Imitation Learning via Vision-Language Fusion for Action Generation (Bi-VLA), a novel framework that extends bilateral controlbased imitation learning to handle more than one task within a single model. Conventional bilateral control methods exploit joint angle, velocity, torque, and vision for precise manipulation but require task-specific models, limiting their generality. p. 0 BiVLA overcomes this limitation by utilizing robot joint angle, velocity, and torque data from leader-follower bilateral control with visual features and natural language instructions through SigLIP and FiLM-based fusion. p. 0 We validated Bi-VLA on two task types: one requiring supplementary language cues and another distinguishable solely by vision. p. 0 Real-robot experiments showed that Bi-VLA successfully interprets vision-language combinations and improves task success rates compared to conventional bilateral control-based imitation learning. p. 0 Our Bi-VLA addresses the single-task limitation of prior bilateral approaches and provides empirical evidence that combining vision and language significantly enhances versatility. p. 0 Experimental results validate the effectiveness of Bi-VLA in realworld tasks. p. 0

I. INTRODUCTION

Robotic manipulation is increasingly important in humancentered applications such as cooking, eldercare, and interactive service robots [1], [2], [3], [4]. Unlike traditional industrial robots that excel at repetitive and pre-programmed routines, service and collaborative robots must adapt to dynamic environments and interact with objects of diverse shapes, sizes, and material properties [5], [6]. p. 0 Achieving such adaptability requires learning frameworks capable of acquiring human-like manipulation strategies [7]. p. 0 Imitation learning (IL) has emerged as a promising approach for transferring human manipulation skills directly to robots [8]. p. 0 Leader-follower teleoperation has become a common pipeline for collecting demonstrations. p. 0 For example, ALOHA and Mobile ALOHA use position-based unilateral control to gather diverse datasets that enable a wide range of manipulation [9], [10]. p. 0 Although effective for kinematicsdriven tasks, such unilateral control omits force feedback, which limits robustness in contact-rich interactions. p. 0

Bilateral control-based imitation learning addresses these limitations by exchanging both position and force information between the demonstrator and robot [11], [12]. p. 0 Bilateral control allows demonstrators to feel contact forces directly, yielding richer demonstrations and improving generalization across objects with different hardness and weights. p. 0

† Equal Contribution, 1 D3 Center, The University of Osaka,2 Graduate School of Information Science and Technology, The University of Osaka,3 Graduate School of Maritime Sciences, Kobe University. p. 0

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Bilateral Control-Based Imitation Learning via Vision-Language Fusion for Action Generation (Bi-VLA) enables a single model to perform multiple tasks by leveraging FiLMbased vision-language fusion and SigLIP-based language embeddings, overcoming the single-task limitation of prior bilateral control-based imitation learning approaches.

  2. Bi-VLA can adaptively generalize across multiple tasks without retraining or manual model selection, as it unifies robot joint angle, velocity, and torque data with visual and language features to handle flexible task switching.

  3. The system can resolve goal ambiguity when vision alone is insufficient by utilizing language cues, as demonstrated by its success in the Two-Target Task where language input is indispensable when vision alone cannot disambiguate the goal.

  4. The system achieves higher grounding accuracy and execution reliability for linguistic instructions compared to other encoders, as Bi-VLA with SigLIP demonstrates robust performance across both commands in the two-target task.

  5. Bi-VLA exhibits strong multitask and low-data generalization by being trained jointly on heterogeneous tasks, maintaining balanced success rates even under unlearned 3-ball conditions, suggesting a single policy can flexibly adapt to heterogeneous scenarios under limited supervision.

Sources

Related papers