Form factors and phenomenology of and semileptonic decays to and
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "Form factors and phenomenology of and semileptonic decays to and".
Mira: Here's the gist of the paper. Form factors and phenomenology of B(s) and D(s) semileptonic decays to η and η′ provide updated predictions for transition form factors across the full kinematic range, which are essential for extracting CKM matrix elements and testing lepton flavour universality Form Factor Calculation Methodology The authors employ state-of-the-art parametrizations to describe the B(s), D(s) → η(′) form factors across the full q2 range, fitting them to the latest light-cone sum rule results They calculate these form factors using LCSR by improving previous work, using new values of heavy quark/meson parameters and new lattice QCD results on η and η′ parameters and their distribution amplitudes The main improvements are in the q2 parametrisation of the form factors, which are performed using a simplified series expansion Statistical analysis is done using the EOS software v1.0.17, which allows for a detailed Bayesian analysis of the form factors and their phenomenology Phenomenological Analysis and CKM Extraction The authors perform a phenomenological analysis of the B → η(′)lν and D(s) → η(′)lν semileptonic decays using the improved form factors By combining their form factors with the most recent measurements, they extract the Vub, Vcs and Vcd CKM matrix elements and compare them with those extracted from other semileptonic decays They also examine the validity and precision of the extracted η-η′ mixing angle in the context of heavy meson decays Constraints on Meson Properties The properties and the rich phenomenology of η and η′ were extensively discussed in the past In the SU(3) flavour-symmetry limit, the η particle corresponds to the flavour-octet member of the Goldstone particles, η8 = 1/√6(uu¯ + d¯d − 2ss¯) and η′ is η0 = 1/√6(uu¯ + d¯d + ss¯), a singlet with a much larger mass which is attributed to the gluonic mass term stemming from the non-perturbative dynamics via the UA(1) anomaly The phenomenological fit of these parameters was performed in
19, 20: with the values: f8 = (1.26 ± 0.04)fπ, θ8 = −21.2◦ ± 1.6◦ f1 = (1.17 ± 0.03)fπ, θ1 = −9.2◦ ± 1.7◦ Comparison with Experimental Data and SM Predictions The authors provide updated SM predictions for the main experimental observables that rely on their form factors Their predictions for the B(s), D(s) → η(′)lν branching ratios are as follows: B(B− → ηl−ν¯l) = 6.5+4.7−3.3 × 10−5, B(B− → η′l−ν¯l) = 2.7+2.2-1.5 × 10−5 They also predict the leptonic forward-backwards asymmetries AFB(B− → ηe−ν¯e) = −2.038+0.030−0.034 × 10−6 and AFB(D− → ηµµ) = −5.90+0.61 × 10−2 The authors discuss the η-η′ mixing angle, noting that while it can currently be extracted from data, it relies on a simplified mixing scheme which will not be usable for precision in these decays The extraction of the η-η′ mixing angle from these ratios can only be used as an indication of the general behaviour, but not as a method for a precise extraction of the ϕ angle The work brings the theoretical treatment of B(s), D(s) → η(′) transitions to a level comparable with that of better-studied modes like B → π and D → K, therefore contributing to a more precise and robust flavour physics program The authors present an updated analysis of B(s), D(s) → η(′) form factors motivated by recent experimental progress on the measurement of the semileptonic decays B(s), D(s) → η(′)lν They use updated light-cone sum rule (LCSR) results and state-of-the-art q2 parametrisations to determine the relevant transition form factors across the full kinematic range Their predictions agree well with the preliminary lattice estimate and with existing experimental extractions They also provide updated theory predictions for the semileptonic branching ratios, lepton-flavour universality ratios and forward-backwards asymmetries, and found a perfect agreement with the available experimental results A Parameters Used For the quark masses, they use m¯ b(¯mb) = 4.18 ± 0.03 GeV, m¯ c(¯mc) = 1.275 ± 0.025 GeV, m¯ s(2 GeV) = 95 ± 5 MeV, and m¯ u(2 GeV) = 4.8+0.5−0.3 MeV, and m¯ d(2 GeV) = 2.3+0.7−0.5 MeV The meson decay constants are obtained from lattice estimates, using fD = 212.0(0.7) MeV
69, 70: , fDs = 249.9(0.5) MeV
69, 70: , fB = 190.0(1.3) MeV
70–73: , and fBs = 230.3(1.3) MeV
70–73: B Experimental Results Used in the Fits The authors summarize the available experimental results for charged B, D(s) → η(′)lν¯l decays For D → ηlν For the total branching ratios they used B(D → ηeν) = (9.99±0.58)×10−4
45, 80: and B(D → ηµν) = (9.08 ± 0.35 ± 0.23) × 10−4
45: D → η′lν For the total branching ratios they used B(D → η′eν) = (1.84±0.18)×10−4
46, 80, 81: and B(D → η′µν) = (1.92±0.28±0.08)×10−4
64: Ds → ηlν For the total branching ratios they used B(Ds → ηeν) = (2.26±0.06)×10−2
64: and B(Ds → ηµν) = (2.24 ± 0.07) × 10−2
47, 82: Ds → η′lν For the total branching ratios they used B(Ds → η′eν) = (8.0±0.4)×10−3
64: and B(Ds → η′µν) = (8.0±0.6)×10−3
47, 82: C Experimental Distributions In fig.
Kai: 5, the authors provide comparison plots between their predicted differential branching ratios and the available experimental results As expected from the excellent p-values of the fits, they find no tension between the data and their results D Coefficients of the Form-Factor Expansion The authors provide coefficients of the form factor expansion eq.
Mira: (3.
Title and authors: Kai: So this paper is titled "Form factors and phenomenology of B(s) and D(s) semileptonic decays to η and η′". It sounds like they are looking at how the structure of these decays helps us figure out some important things about the CKM matrix elements.
Mira: Right, it's not just about the structure itself, Kai, it’s using those decay rates to get better values for Vub, Vcs, and Vcd. They are really connecting this form factor work to the actual measurements we do in experiments.
Lev: From my side, I'm curious about how they're handling the complexity of getting these form factors across the whole range of q two. That’s where most of the real work happens before you can even talk about what you measure.
Kai: Exactly, Lev, they are using state-of-the-art parametrizations to describe these form factors for B(s) and D(s) decays to eta and eta prime across the entire q two range by fitting them to the latest light cone sum rule results.
Mira: And they’re making improvements there, too, specifically in how they parametrize those form factors using a simplified series expansion which is what lets them do a detailed Bayesian analysis of the form factors and their phenomenology using EOS software v1 point 0.seventeen <ref:2507.13734#pg1>.
Lev: That Bayesian part sounds powerful for getting detailed descriptions of the phenomenology, but I wonder if that level of detail is feasible when you're trying to compare it against real hardware constraints for running these analyses later on.
Kai: Well, the paper suggests that by doing this detailed analysis using those improved form factors, they can extract those CKM matrix elements Vub, Vcs, and Vcd by combining their predictions with the most recent experimental measurements.
Mira: And they also test things like lepton flavour universality in these decays, which is pretty important because it checks if the leptons are behaving as expected across different flavors.
Lev: If they can get those CKM elements extracted with satisfactory p values compared to other semileptonic decays, that means their theoretical framework is getting much more robust for real experimental input.
Kai: They also provide updated Standard Model predictions for the main observables, like the branching ratios for B(s) and D(s) to eta prime decays, as well as some lepton flavour universality ratios and forward-backwards asymmetries.
Mira: I noticed they predict the B(B minus to eta minus nu anti-nu) branching ratio to be around six point five plus four point seven minus three point three times ten to the power of negative five, which looks pretty specific.
Title and authors: Lev: From an engineering standpoint, if those predictions agree well with preliminary lattice estimates and existing experimental extractions, that gives us confidence that the underlying physics description is sound before we try to run complex simulations.
Kai: They also discuss the properties of eta and eta prime in the SU three flavor symmetry limit, where eta is the flavor octet member and eta prime is a singlet with a much larger mass attributed to some gluonic mass term from non-perturbative dynamics via the UA one anomaly.
Mira: That's a big theoretical piece, connecting these decays back to the underlying structure of QCD through those SU three symmetry breaking patterns. They use parameters like f eight equals one point two six plus or minus zero point zero four times f pi and theta eight equals negative twenty one point two degrees plus or minus one point six degrees.
Lev: Those specific values for the decay constants and angles are what you need to feed into a real calculation, but I wonder how sensitive the final CKM extraction is to these specific parameter choices.
Kai: The paper compares their results with the first lattice QCD calculation of the unphysical Bs to eta s decay, which serves as a comparison point for their form factor analysis.
Mira: They show that by improving the form factor analysis of semileptonic B(s) and D(s) decays to eta and eta prime to bring them to the same level of scrutiny as it was done for semileptonic B pi transitions, they are raising the bar on how we look at these systems.
Lev: So, in terms of what this means practically for someone building error correction hardware, it suggests that if we can get this level of precision in the form factors, the subsequent error budget calculations for extracting CKM elements will be much tighter.
Kai: They also examine the validity and precision of the eta eta prime mixing angle extracted from data within the context of heavy meson decays, noting that while it can be extracted from data now, it relies on a simplified mixing scheme that won't work for high precision.
Mira: That’s a fair point; they admit that extracting the phi angle with this method is only going to be an indication of general behavior rather than a precise measurement.
Lev: So what this paper really contributes is bringing the theoretical treatment of B(s) and D(s) to eta prime transitions up to a level comparable with better studied modes like B pi and D K, which makes the whole flavor physics program more robust.
Title and authors: Kai: They also provide updated Standard Model predictions for things like the branching ratios for B(s) and D(s) to eta prime decays, lepton flavour universality ratios, and forward-backwards asymmetries that they compare with experimental results.
Mira: Their predictions for the branching ratios are B(B minus to eta minus nu anti-nu) is six point five plus four point seven minus three point three times ten to the power of negative five, and B(B minus to eta prime minus nu anti-nu) is two point seven plus two point two minus one point five times ten to the power of negative five.
Lev: If their predictions match those experimental results well, especially for those asymmetries, it tells us that our current understanding of these flavor dynamics is holding up under stress.
Kai: And for the asymmetry measurements, they predict AFB(B minus to eta e minus anti-e) is negative two point zero three eight plus or minus zero point zero thirty minus zero point zero thirty four times ten to the power of negative six, and AFB(D minus to eta mu mu) is negative five point nine zero plus or minus zero point six one times ten to the power of negative two.
Mira: The comparison with experimental data in Figure five shows no tension between their predictions and the available results, which is a strong indicator that their methodology is working as intended <ref:2507.13734#pg2>.
Lev: It’s reassuring when you see that agreement, because it means the theoretical machinery they built to calculate those form factors is actually capturing the physics we expect from nature.
Kai: So to wrap up this paper on "Form factors and phenomenology of B(s) and D(s) semileptonic decays to η and η′", they give us updated SM predictions for branching ratios, lepton flavour universality ratios, and asymmetries that find good agreement with experimental results.
Mira: They also confirm that by using their improved form factors, they can extract the CKM elements Vub, Vcs, and Vcd with precision competitive with other semileptonic decays.
Lev: And they also give us a clearer picture of the limitations of extracting the eta eta prime mixing angle precisely from these ratios because it relies on a simplified mixing scheme.
Kai: Overall, this work brings the theoretical treatment of B(s) and D(s) to eta prime transitions to a level that’s much better for our flavor physics program overall.
Mira: It’s about using more precise semileptonic decay measurements to get tighter constraints on the CKM matrix elements and test lepton flavour universality in these specific modes.
Lev: And for us, it means having a more rigorous way to check the heavy quark dynamics when we are designing the next generation of experiments.
The paper's summary: Kai: So this paper is about taking the form factors for B s and D s decays to eta and eta prime and running them through some serious analysis to see what they tell us about fundamental physics stuff like the CKM matrix elements.
Mira: Right, it’s essentially using these decay rates as a window into how particles interact, specifically looking at those transition form factors across the whole kinematic range.
Lev: And they’re doing this by improving the way they calculate those form factors using light cone sum rules and some new lattice QCD data for the eta and eta prime parameters.
Kai: Yeah, so they use a simplified series expansion to model how these form factors change with energy, which lets them do a detailed Bayesian analysis of the whole phenomenology.
Mira: And what that means is they can extract those CKM matrix elements like Vub, Vcs, and Vcd by combining their theoretical form factors with experimental measurements in a way that gives them pretty good precision.
Lev: So if they can get those CKM elements extracted with satisfactory p values compared to other semileptonic decays, that’s a big step for the theory side because it means the theoretical framework is getting much more robust when you actually plug in real experimental data.
Kai: They also provide updated Standard Model predictions for the branching ratios of B s and D s to eta prime decays, as well as some lepton flavor universality ratios and forward-backwards asymmetries.
Mira: And they find that these predictions agree very well with what we have measured experimentally, which is quite a strong result.
Lev: So when you look at those asymmetry measurements, like the AFB for B minus to eta e minus anti-e, they predict a certain value that seems consistent with the data in Figure five.
Kai: It’s reassuring when you see that agreement because it means the theoretical machinery they built to calculate those form factors is actually capturing the physics we expect from nature.
Mira: But there’s a catch, and this is important for us to remember. They discuss extracting that eta eta prime mixing angle, and they say that while you can get an indication of its behavior from these ratios now, relying on a simplified mixing scheme means it won't work for precise measurements of the phi angle.
Lev: So it’s not a perfect extraction of the phase, but it tells us how the system behaves generally.
Kai: So what this paper really delivers is taking the theoretical treatment of B s and D s to eta prime transitions up to a level comparable to modes like B pi and D K, which makes the whole flavor physics program more robust.
Mira: It’s about using these precise semileptonic decay measurements to get tighter constraints on the CKM matrix elements and test lepton flavor universality in these specific modes.
Lev: And for us, it means having a more rigorous way to check the heavy quark dynamics when we are designing the next generation of experiments.
Kai: So they show that by focusing on these B s and D s transitions, we can get a much clearer picture of how these particles behave at this level of precision.
Mira: The work confirms that their methodology is working as intended because there’s no tension between their predictions and the available experimental results shown in Figure five.
Lev: It’s solid validation for the calculation methods they used to determine those form factors across all those kinematic regions.
The paper's improvements: Kai: So, to wrap up on how they did this paper, the main thing they are suggesting is that by using their improved form factor analysis, we can get a much tighter constraint on those CKM elements like Vub and Vcs than we could before.
Mira: Right, they are basically saying that by moving from just fitting to something more detailed with the series expansion, you’re not just getting better numbers; you’re getting a clearer picture of the underlying dynamics.
Lev: And on the hardware side, this means that if we were to design an error correction system for a real experiment, having these form factors calculated with this level of detail means our error budget calculations for those CKM elements are going to be much tighter.
Kai: Exactly, because the way they handle those extrapolation effects with the series expansion helps us understand where the uncertainty is coming from across the whole q two range.
Mira: They’re suggesting that this improved approach brings their theoretical treatment of these B s and D s decays up to a level comparable to how we treat things like B pi transitions, which is a big step in making sure our flavor physics program is actually robust.
Lev: That comparison point is important because it tells us that if we can nail the precision here, the uncertainties we get for other modes should follow a similar path.
Kai: They also explicitly flag what they can’t do right now, which is extracting the eta eta prime mixing angle with full precision because they still rely on that simplified mixing scheme.
Mira: So, while it’s good for getting a general sense of how the system moves between those states, you can't use this method to get a precise measurement of that specific phi angle yet.
Lev: That limitation is important for us because we need to know what kind of precision we can *actually* expect from the data you’re collecting on real hardware.
Kai: So the implication here is that they’ve shown us a pathway to get those CKM matrix elements with higher fidelity, even if there are still some limitations on specific angles.
Mira: It shows that better input physics for these decays directly translates into tighter constraints on the fundamental parameters of the Standard Model.
Lev: This level of rigor is exactly what we need when designing detectors and algorithms for future experiments; you can’t build something robust if your underlying theoretical inputs are too blurry.
Conclusion: Kai: So to wrap up on "Form factors and phenomenology of B(s) and D(s) semileptonic decays to η and η′", this paper shows that by using their improved form factor analysis, we can get a much tighter constraint on those CKM elements like Vub and Vcs than we could before.
Mira: Exactly, they are basically saying that by moving from just fitting to something more detailed with the series expansion, you’re not just getting better numbers; you’re getting a clearer picture of the underlying dynamics.
Lev: And on the hardware side, this means that if we were to design an error correction system for a real experiment, having these form factors calculated with this level of detail means our error budget calculations for those CKM elements are going to be much tighter.
Kai: Exactly, because the way they handle those extrapolation effects with the series expansion helps us understand where the uncertainty is coming from across the whole q two range.
Mira: They’re suggesting that this improved approach brings their theoretical treatment of these B s and D s decays up to a level comparable to how we treat things like B pi transitions, which is a big step in making sure our flavor physics program is actually robust.
Lev: That comparison point is important because it tells us that if we can nail the precision here, the uncertainties we get for other modes should follow a similar path.
Kai: They also explicitly flag what they can’t do right now, which is extracting the eta eta prime mixing angle with full precision because they still rely on that simplified mixing scheme.
Mira: So while it’s good for getting a general sense of how the system moves between those states, you can't use this method to get a precise measurement of that specific phi angle yet.
Lev: That limitation is important for us because we need to know what kind of precision we can *actually* expect from the data you’re collecting on real hardware.
Kai: So the implication here is that they’ve shown us a pathway to get those CKM matrix elements with higher fidelity, even if there are still some limitations on specific angles.
Mira: It shows that better input physics for these decays directly translates into tighter constraints on the fundamental parameters of the Standard Model.
Lev: This level of rigor is exactly what we need when designing detectors and algorithms for future experiments; you can’t build something robust if your underlying theoretical inputs are too blurry.
Blaženka Melića, Meril Reboudba
Rudjer Boskovic Institute · Universite Paris-Saclay
hep-ph
Submitted: 2025-07-18
Updated: 2026-11-13
Journal ref: JHEP 10 (2025) 025
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 81/100
The gist: Form factors and phenomenology of B(s) and D(s) semileptonic decays to η and η′ provide updated predictions for transition form factors across the full kinematic range…
Key concepts
- Transition Form Factors
- These are mathematical functions that describe how quarks inside heavy mesons (like B or D mesons) transition into the final state particles (eta or eta') when they decay. Calculating these accurately across all energy ranges is crucial for understanding the decay process.
- Light-Cone Sum Rules (LCSR)
- LCSR is a theoretical method used to calculate these form factors by relating them to non-perturbative QCD dynamics. The authors improved this method by incorporating new parameters and lattice QCD results for the eta and eta' mesons, leading to more accurate predictions.
- CKM Matrix Elements
- The Cabibbo-Kobayashi-Maskawa (CKM) matrix describes the mixing of quark flavors in weak interactions. By analyzing the decay rates of B(s) and D(s) mesons into leptons, researchers can extract precise values for elements like $|V_{ub}|$, $|V_{cs}|$, and $|V_{cd}|.
Terminology
Summary
Form factors and phenomenology of B(s) and D(s) semileptonic decays to η and η′ provide updated predictions for transition form factors across the full kinematic range, which are essential for extracting CKM matrix elements and testing lepton flavour universality
Form Factor Calculation Methodology
The authors employ state-of-the-art parametrizations to describe the B(s), D(s) → η(′) form factors across the full q2 range, fitting them to the latest light-cone sum rule results They calculate these form factors using LCSR by improving previous work, using new values of heavy quark/meson parameters and new lattice QCD results on η and η′ parameters and their distribution amplitudes The main improvements are in the q2 parametrisation of the form factors, which are performed using a simplified series expansion Statistical analysis is done using the EOS software v1.0.17, which allows for a detailed Bayesian analysis of the form factors and their phenomenology
Phenomenological Analysis and CKM Extraction
The authors perform a phenomenological analysis of the B → η(′)lν and D(s) → η(′)lν semileptonic decays using the improved form factors By combining their form factors with the most recent measurements, they extract the Vub, Vcs and Vcd CKM matrix elements and compare them with those extracted from other semileptonic decays They also examine the validity and precision of the extracted η-η′ mixing angle in the context of heavy meson decays
Constraints on Meson Properties
The properties and the rich phenomenology of η and η′ were extensively discussed in the past In the SU(3) flavour-symmetry limit, the η particle corresponds to the flavour-octet member of the Goldstone particles, η8 = 1/√6(uu¯ + d¯d − 2ss¯) and η′ is η0 = 1/√6(uu¯ + d¯d + ss¯), a singlet with a much larger mass which is attributed to the gluonic mass term stemming from the non-perturbative dynamics via the UA(1) anomaly The phenomenological fit of these parameters was performed in [19, 20] with the values: f8 = (1.26 ± 0.04)fπ, θ8 = −21. p. 32◦ ± 1.6◦ f1 = (1.17 ± 0.03)fπ, θ1 = −9. p. 32◦ ± 1.7◦
Comparison with Experimental Data and SM Predictions
The authors provide updated SM predictions for the main experimental observables that rely on their form factors Their predictions for the B(s), D(s) → η(′)lν branching ratios are as follows: B(B− → ηl−ν¯l) = 6.5+4.7−3.3 × 10−5, B(B− → η′l−ν¯l) = 2.7+2.2-1.5 × 10−5 They also predict the leptonic forward-backwards asymmetries AFB(B− → ηe−ν¯e) = −2. p. 2038+0.030−0.034 × 10−6 and AFB(D− → ηµµ) = −5. p. 290+0.61 × 10−2
Conclusion on Mixing Angle Extraction
The authors discuss the η-η′ mixing angle, noting that while it can currently be extracted from data, it relies on a simplified mixing scheme which will not be usable for precision in these decays The extraction of the η-η′ mixing angle from these ratios can only be used as an indication of the general behaviour, but not as a method for a precise extraction of the ϕ angle The work brings the theoretical treatment of B(s), D(s) → η(′) transitions to a level comparable with that of better-studied modes like B → π and D → K, therefore contributing to a more precise and robust flavour physics program
Summary
The authors present an updated analysis of B(s), D(s) → η(′) form factors motivated by recent experimental progress on the measurement of the semileptonic decays B(s), D(s) → η(′)lν They use updated light-cone sum rule (LCSR) results and state-of-the-art q2 parametrisations to determine the relevant transition form factors across the full kinematic range Their predictions agree well with the preliminary lattice estimate and with existing experimental extractions They also provide updated theory predictions for the semileptonic branching ratios, lepton-flavour universality ratios and forward-backwards asymmetries, and found a perfect agreement with the available experimental results
A Parameters Used
For the quark masses, they use m¯ b(¯mb) = 4.18 ± 0.03 GeV, m¯ c(¯mc) = 1. p. 3275 ± 0.025 GeV, m¯ s(2 GeV) = 95 ± 5 MeV, and m¯ u(2 GeV) = 4. p. 38+0.5−0.3 MeV, and m¯ d(2 GeV) = 2. p. 33+0.7−0.5 MeV The meson decay constants are obtained from lattice estimates, using fD = 212. p. 20(0.7) MeV [69, 70], fDs = 249.9(0.5) MeV [69, 70], fB = 190.0(1.3) MeV [70–73], and fBs = 230.3(1.3) MeV [70–73]
B Experimental Results Used in the Fits
The authors summarize the available experimental results for charged B, D(s) → η(′)lν¯l decays For D → ηlν For the total branching ratios they used B(D → ηeν) = (9.99±0.58)×10−4 [S = 1.55] [45, 80] and B(D → ηµν) = (9.08 ± 0.35 ± 0.23) × 10−4 [45] D → η′lν For the total branching ratios they used B(D → η′eν) = (1. p. 184±0.18)×10−4 [46, 80, 81] and B(D → η′µν) = (1.92±0.28±0.08)×10−4 [64] Ds → ηlν For the total branching ratios they used B(Ds → ηeν) = (2. p. 126±0.06)×10−2 [64] and B(Ds → ηµν) = (2.24 ± 0.07) × 10−2 [47, 82] Ds → η′lν For the total branching ratios they used B(Ds → η′eν) = (8. p. 10±0.4)×10−3 [64] and B(Ds → η′µν) = (8.0±0.6)×10−3 [47, 82]
C Experimental Distributions
In fig. 5, the authors provide comparison plots between their predicted differential branching ratios and the available experimental results As expected from the excellent p-values of the fits, they find no tension between the data and their results
D Coefficients of the Form-Factor Expansion
The authors provide coefficients of the form factor expansion eq. (3.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved form factor analysis can perform detailed Bayesian analysis of form factors and their phenomenology using EOS software v1.0.17 to provide a detailed description of transition form factors across the full q squared range, including extrapolation effects modeled by a complete series expansion (SE) with truncation order N equals 2.
-
The system can extract CKM matrix elements |Vub|, Vcs, and Vcd by performing combined fits of LCSR results and experimental data for all transitions to obtain satisfactory p-values, providing values competitive in precision with those from more traditional semileptonic decays.
-
The AI can predict the branching ratios for B(s) and D(s) to eta (prime) decays based on the updated SM predictions derived from the calculated form factors, including lepton flavor universality ratios and forward-backwards asymmetries.
Sources
- Measurement of Differential Branching Fractions of Inclusive ${B \to X_u \, \ell^+\, \nu_{\ell}}$ Decays
- Nonleptonic $B_s$ to charmonium decays: analyses in pursuit of determining the weak phase $\beta_s$
- Exploring CP Violation and $\eta$-$\eta'$ Mixing with the $B^0_{s,d} \to J/\psi \eta^{(\prime)}$ Systems
- Study of $\eta-\eta^{\prime}$ mixing from measurement of $B^0_{(s)} \rightarrow J/\psi \eta^{(\prime)}$~decay rates
- The $\bar{B}\to \pi$ form factors from QCD and their impact on $|V_{ub}|$
- New determination of $|V_{ub}/V_{cb}|$ from $B_s^0\to \lbrace K^-, D_s^- \rbrace \mu^+\nu$
- Form factors of B, Bs -> eta, eta' and D, Ds -> eta, eta' transitions from QCD light-cone sum rules
- Masses and decay constants of the $\eta$ and $\eta^\prime$ mesons from lattice QCD
- State mixing and masses of the $\pi^0$, $\eta$ and $\eta^\prime$ mesons from $n_f=1+1+1$ lattice QCD+QED
- Theoretical and Phenomenological Constraints on Form Factors for Radiative and Semi-Leptonic B-Meson Decays
- EOS -- A Software for Flavor Physics Phenomenology
- Toward accurate form factors for $B$-to-light meson decay from lattice QCD
- Etaprime and Eta Mesons with Connection to Anomalous Glue
- Weak decay constants of the neutral pseudoscalar mesons from lattice QCD+QED
- Pion distribution amplitude from Euclidean correlation functions: Exploring universality and higher-twist effects
- Flavor-singlet meson decay constants from $N_f=2+1+1$ twisted mass lattice QCD
- Mixing between flavor singlets in lattice gauge theories coupled to matter fields in multiple representations
- $\eta$-glueball mixing from $N_f=2$ lattice QCD
- Light-cone distribution amplitudes of pseudoscalar mesons from lattice QCD
- B->eta(') Form Factors in QCD
Related papers
- MadNIS at NLO
- The NANOGrav 15-year data set: A Limit on Continuous Spin Gravitons
- DIS-secting the universe with high-energy neutrinos
- Crowdsourcing Gravitational Waves from Superradiant Axions
- Classification of g-modes for neutron stars with a strong transition: Novel universal relation including slow stable hybrid stars
- Scalar axion field of toroidal electromagnetic pulses