Protocols for Univariate Sumcheck

arXiv:2505.00554 · cs.CR · Submitted 2025-05-01 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Security Radio. Generated commentary on the latest security and cryptography papers.

Nadia: We're looking at the paper: "Protocols for Univariate Sumcheck".

Elias: Here's the gist of the paper. Three candidate approaches for univariate sumcheck over roots of unity are presented <ref:2505.00554#pg2>.

Nadia: The paper explores methods to reduce multivariate sumcheck protocols to univariate ones, which is important because it allows existing techniques from multivariate encodings to be applied efficiently in a univariate setting <ref:2505.00554#pg4>.

Elias: The paper introduces three candidate approaches for univariate sumcheck over roots of unity <ref:2505.00554#pg2>.

Nadia: Sumcheck is defined as a probabilistic reduction of the type “P iP(i) = s if and only if P'(r) = t” <ref:2505.00554#pg2>.

Paper summary: Nadia: So to wrap up, this paper explored three candidate approaches for univariate sumcheck over roots of unity, focusing on how to get these protocols down to a univariate setting.

Elias: The authors demonstrate that linear-time univariate sumcheck for pre-existing unex polynomials is generically achievable by combining a suitable reduction and an adaptor.

Priya: What does that mean in practice for us? It suggests we can use the prover efficiency previously reserved for multivariate data encodings when dealing with these specific types of polynomials.

Nadia: Right, and they showed that Protocol four is clearly more efficient than Protocol three when reducing the univariate sumcheck claim to Gemini.

Elias: Plus, combining Protocol four with Gemini is concretely more efficient than combining the standard multivariate sumcheck with that adaptor from section three.

Priya: So it seems like any current use case of the Aurora protocol might benefit from this prover efficiency previously reserved for the world of multivariate data encodings.

Nadia: They showed that this combination is also concretely more efficient than the combination of the standard multivariate sumcheck with that adaptor from section three.

Elias: It means we’ve established that linear-time univariate sumcheck for pre-existing unex polynomials is generically achievable by combining a suitable reduction and an adaptor.

Priya: So we have a solid result showing this is possible, which gives us a path forward for improving the efficiency of these cryptographic proofs.

Conclusion: Nadia: So we've looked at three different ways to do sumcheck over roots of unity, and this paper presents three candidate approaches for univariate sumcheck over roots of unity.

Elias: It focuses on how to take those complex multivariate sumchecks and reduce them down to a univariate setting.

Priya: What does that mean for the actual data we're dealing with? How does reducing it make the privacy concerns easier or harder to manage?

Nadia: Well, what they show is that linear-time univariate sumcheck for pre-existing unex polynomials is generically achievable by combining a suitable reduction and an adaptor.

Elias: That’s the main result. It means we can get the speed of multivariate data encodings applied to these specific types of polynomials when we only have to deal with one variable.

Priya: So, if this works, it suggests that we can use faster methods for proving things in this area without having to deal with all those extra variables and complexity.

Nadia: Exactly. And they show that protocol four is clearly more efficient than protocol three when reducing the univariate sumcheck claim to Gemini.

Elias: That’s a direct comparison on efficiency here, showing that combining protocol four with Gemini beats using the standard multivariate sumcheck with that adaptor from section three.

Priya: That combination being more efficient means we can use a faster proof system overall for these types of statements.

Nadia: It points toward the idea that linear-time univariate sumcheck for pre-existing unex polynomials is generically achievable by combining a suitable reduction and an adaptor.

Elias: And they sketch out some limitations too, showing that the number of variables and rounds can be set to something like c equals r sub one over four plus two m minus one over two prime, which is about the square root of m.

Priya: So for someone just listening to this show, it means that even with these speed improvements, you still have those dependencies on the degree of the polynomial and some rounds involved.

Nadia: True. But what's really interesting here is how this result might help us apply the prover efficiency previously reserved for multivariate data encodings in real-world scenarios.

Malcom Mohamed

cs.CR

Submitted: 2025-05-01

Updated: 2026-11-01

Comments: Full version of the paper from APKC@AsiaCCS'26

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 85/100

The gist: Three candidate approaches for univariate sumcheck over roots of unity are presented <ref:2505.00554#pg2>.

Key concepts

Sumcheck
A probabilistic check used in cryptography to verify if a polynomial satisfies certain properties related to roots of unity. It works by comparing the result of evaluating a function at specific points against an expected value, ensuring correctness with high probability.
Multilinear vs. Univariate Polynomials
The paper distinguishes between polynomials defined over multiple variables (multilinear) and those defined over a single variable (univariate). This distinction helps separate the cryptographic landscape into systems that use different encoding techniques based on whether they are multivariate or univariate.
Adaptors
These are tools that map statements about complex, multilinear polynomials to equivalent statements involving simpler, univariate polynomials. They allow researchers to transfer techniques from one system (like multivariate) into another (like univariate).
Gemini Tensor Protocol
This is a specific adaptor mentioned in the paper. It allows a verifier who has access to a simple univariate polynomial to prove statements about much more complex multilinear polynomials, effectively bridging the gap between the two types of systems.

Terminology

Summary

Three candidate approaches for univariate sumcheck over roots of unity are presented <ref:2505. p. 0

Where the paper says it

de Abstract. Three candidate approaches for univariate sumcheck over roots of unity are presented.

00554#pg2>. The paper explores methods to reduce multivariate sumcheck protocols to univariate ones, which is important because it allows existing techniques from multivariate encodings to be applied efficiently in a univariate setting <ref:2505. p. 3
Where the paper says it

4 Malcom Mohamed The upshot is that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor. Thus, any current use case of the Aurora protocol may benefit from the prover efficiency previously reserved for the world of multivariate data encodings.

00554#pg4>.

Introduction and Motivation

The paper introduces three candidate approaches for univariate sumcheck over roots of unity <ref:2505.00554#pg2>. Sumcheck is defined as a probabilistic reduction of the type “P iP(i) = s if and only if P'(r) = t” <ref:2505.00554#pg2>. It distinguishes between multilinear extension polynomials mlex[v] and univariate extension polynomials unex[v] which leads to a separation of the SNARK landscape into univariate systems that internally use unex to encode their data and multilinear ones that use mlex <ref:2505. p. 0

Where the paper says it

We denote its multilinear extension polynomial as mlex [ v ] and its univariate extension polynomial as unex [ v ]. The two extensions give rise to a separation of the SNARK landscape into univariate systems that internally use unex to encode their data and multilinear ones that use mlex.

00554#pg2>. The standard multivariate sumcheck protocol is typically favored for prover efficiency while the standard univariate protocol takes just one round and can thus be considered as more bandwidth and verifier friendly <ref:2505. p. 0
Where the paper says it

The starkest cryptographic design difference between these classes of systems comes from the kinds of sumcheck protocols that can be used with each. The standard multivariate sumcheck [17] is typically favored for prover efficiency while the standard univariate protocol [ 3 ] takes just one round and can thus be considered as more bandwidth and verifier friendly.

00554#pg2>.

Adaptors and Reductions

Researchers have proposed adaptors which identify multilinear polynomials with univariate polynomials in order to bring “opposite world” techniques into other systems <ref:2505.00554#pg2>. These adaptors are categorized by how “opposite world” polynomials are mapped to the “own world” and how statements about the mapped polynomials are proven <ref:2505. p. 0

Where the paper says it

Motivated by this apparent separation, researchers have proposed adaptors which identify multilinear polynomials with univariate polynomials in order to bring “opposite world” techniques into other systems. These adaptors can be categorized by (1) how “opposite world” polynomials are mapped to the “own world” and (2) how statements about the mapped polynomials are proven.

00554#pg2>. Examples of maps include mapping coefficients to coefficients, values to coefficients, and values to values <ref:2505. p. 1
Where the paper says it

Maps from multilinears to univariates that enable “opposite world” sumchecks. Coefficients to coefficients Values to coefficients Values to values Recursive folding Gemini tensor protocol [5, Sec.

00554#pg4>. The Gemini tensor protocol is one such adaptor that proves statements of the form “mlin[f](z1,. p. 4
Where the paper says it

This claim is then checked with a single query to P. In this article, Gemini (to be exact, only its “tensor product” subprotocol) is understood as a coefficient-to-coefficient multilinear-to-univariate adaptor, that is, a protocol to prove statements of the form “mlin[f](z1, .

.., zm) = s” to a verifier with oracle access to the univariate polynomial f <ref:2505. p. 4
Where the paper says it

In this article, Gemini (to be exact, only its “tensor product” subprotocol) is understood as a coefficient-to-coefficient multilinear-to-univariate adaptor, that is, a protocol to prove statements of the form “mlin[f](z1, . , zm) = s” to a verifier with oracle access to the univariate polynomial f [cf.

00554#pg2>.

Proving mlex via unex

The paper describes a univariate PIOP for proving the statement “mlex[v](z1,..., zm) = s” to a verifier who has access to a unex[v] oracle <ref:2505. p. 5

Where the paper says it

3 Evaluating mlex via unex This section describes a univariate PIOP for proving the statement “mlex[v](z1, . , zm) = s” to a verifier who has access to a unex[v] oracle.

00554#pg2>. Protocol 2 achieves this by using square evaluation folding and deriving a polynomial decomposition f into a square part fsq and a non-square part fno <ref:2505. p. 5
Where the paper says it

This requirement motivates the following decomposition of f into a square part fsq and a non-square part fno such that deg(fsq), deg(fno) ≤ 2 m−1 − 1 and fsq(w 2i ) = f(w 2i ) fno(w 2i ) = f(w 2i+1) for all i ∈ [0, 2 m−1 − 1]. This is equivalent to saying that fsq(x) = f % (x 2m−1 − 1) fno(x) = f % (x 2m−1 + 1) (wx) since the remainder of any p modulo q, where q is monic, is the unique polynomial of degree below deg(q) that agrees with p on the zeros of q.

00554#pg4>. The verifier checks equations derived from the generalized Lagrange interpolation formula to confirm the relationship between unex[v] and mlex[v] <ref:2505. p. 6
Where the paper says it

Protocols for Univariate Sumcheck 7 With the square decomposition, we can rephrase the verifier’s goal as confirming that f ′ = (1 − z1)fsq + z1fno. This, in turn, is straightforwardly possible with the following generalized Lagrange interpolation formula: f(x) = 1 + x 2m−1 2 fsq(x) + 1 − x 2m−1 2 fno(w −1x).

00554#pg4>.

Direct Univariate Sumcheck Reductions

The authors describe two direct linear-time sumchecks for univariates as an alternative to the multivariate sumcheck protocol <ref:2505.00554#pg2>. Protocol 3 is a reduction from the relation R = O f1,. p. 3

Where the paper says it

For details on PIOPs, also refer to [9, Section 2. Related to the notion of a PIOP is that of a reduction, by which we mean a protocol where the verifier outputs an instance of another NP relation and the prover outputs an instance-witness pair.

.., O fq, s; P(i) = s to (after m steps) R' = O f1,..., O fq, r1,.., rm, s'; g(mlinf1 = s', where s is a constant <ref:2505.00554#pg4>. This protocol has a prover running time in O(d+2q 2/d 2m) overall <ref:2505. p. 7
Where the paper says it

8 Malcom Mohamed – verifier running time in O(m), – 1 round, – no field elements sent by the prover, – 2m oracles sent by the prover, – 3m + 1 oracle queries made by the verifier (2m + 1 of which at the same point). The properties besides completeness, soundness and prover run time are obvious from the description of Protocol 2.

00554#pg4>.

Conclusion on Efficiency

The final protocol, Protocol 4, is shown to be clearly more efficient than Protocol 3 in reducing the univariate sumcheck claim to Gemini <ref:2505.00554#pg4>. Its performance essentially equals the standard multivariate sumcheck protocol in all respects by design <ref:2505. p. 0

Where the paper says it

The starkest cryptographic design difference between these classes of systems comes from the kinds of sumcheck protocols that can be used with each. The standard multivariate sumcheck [17] is typically favored for prover efficiency while the standard univariate protocol [ 3 ] takes just one round and can thus be considered as more bandwidth and verifier friendly.

p. 0
Where the paper says it

The starkest cryptographic design difference between these classes of systems comes from the kinds of sumcheck protocols that can be used with each. The standard multivariate sumcheck [17] is typically favored for prover efficiency while the standard univariate protocol [ 3 ] takes just one round and can thus be considered as more bandwidth and verifier friendly.

00554#pg4>. The combination of Protocol 4 with Gemini is also concretely more efficient than the combination of the standard multivariate sumcheck with the adaptor from Section 3 <ref:2505. p. 8
Where the paper says it

, mlex[vq]) to reduce the claim to evaluation claims about mlex[vi ]. Then, these claims—or preferably a single batched claim about a random linear combination— are handled with the adaptor.

p. 8
Where the paper says it

, mlex[vq]) to reduce the claim to evaluation claims about mlex[vi ]. Then, these claims—or preferably a single batched claim about a random linear combination— are handled with the adaptor.

p. 8
Where the paper says it

, mlex[vq]) to reduce the claim to evaluation claims about mlex[vi ]. Then, these claims—or preferably a single batched claim about a random linear combination— are handled with the adaptor.

00554#pg4>. This suggests that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor <ref:2505. p. 3
Where the paper says it

4 Malcom Mohamed The upshot is that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor. Thus, any current use case of the Aurora protocol may benefit from the prover efficiency previously reserved for the world of multivariate data encodings.

p. 3
Where the paper says it

4 Malcom Mohamed The upshot is that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor. Thus, any current use case of the Aurora protocol may benefit from the prover efficiency previously reserved for the world of multivariate data encodings.

p. 3
Where the paper says it

4 Malcom Mohamed The upshot is that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor. Thus, any current use case of the Aurora protocol may benefit from the prover efficiency previously reserved for the world of multivariate data encodings.

00554#pg4>.

Round Reductions

Both the composition of the multivariate sumcheck protocol with the new adaptor and the DGM-based univariate reduction admit natural round reductions <ref:2505.00554#pg4>. The third protocol may use a different way to reduce rounds and is shown to achieve O(√m) <ref:2505. p. 2

Where the paper says it

Our protocols have no overhead for this transformation, unlike [19], and do not depend on special non-standard interpolation domains, unlike [13, Section 5] or [2, Section 7]. The third protocol may use a different way to reduce rounds and is shown to achieve O( √ m) (Section 4.

00554#pg4>. This suggests that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor <ref:2505.00554#pg4>.

Domain Identity Reduction

Protocol 3 describes a reduction from the relation R = nO f1,..., O fq, O h; g(f1,..., fq) % (x 2m − 1) = h to (after m steps) R' = O f1,.., O fq, r1,., rm, s'; g(mlinf1 = s', where s is a constant <ref:2505.00554#pg4>. This reduction has a prover running time in O(d+q 2/d 2m) <ref:2505. p. 6

Where the paper says it

, zm, s; v f0 = unex[v] ∧ mlex[v](z1, . , zm) = s with – perfect completeness, – soundness error in O( D |F| ) (where D is a global upper bound on any oracle polynomial’s degree), – prover running time in O(2m)

00554#pg4>.

Final Protocol Efficiency

Protocol 4 is shown to be more efficient than Protocol 3 in reducing the univariate sumcheck claim to Gemini <ref:2505.00554#pg4>. Its performance essentially equals the standard multivariate sumcheck protocol in all respects by design <ref:2505.00554#pg4>. The combination of Protocol 4 with Gemini is also concretely more efficient than the combination of the standard multivariate sumcheck with the adaptor from Section 3 <ref:2505.00554#pg4>.

Generalization Sketch

The generalization sketch suggests that for some choices of degrees, the number of variables and of rounds can be set to c = &r 1/4 + 2m − 1/2' = O√m <ref:2505.00554#pg4>. The prover run time is still strictly linear because the sums in the parenthesized expressions above converge <ref:2505. p. 7

Where the paper says it

8 Malcom Mohamed – verifier running time in O(m), – 1 round, – no field elements sent by the prover, – 2m oracles sent by the prover, – 3m + 1 oracle queries made by the verifier (2m + 1 of which at the same point). The properties besides completeness, soundness and prover run time are obvious from the description of Protocol 2.

00554#pg4>. This suggests that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor <ref:2505.00554#pg4>.

References

The paper cites numerous works including [17], [3], [18], and others to support its claims <ref:2505.00554#pg4>. The references provided cover topics such as Linear Prover IOPs in Log Star Rounds, Aurora, Gemini, and various commitment schemes <ref:2505. p. 2

Where the paper says it

Prover Verifier Rounds F Oracles Aurora [3] qm + d+q q d2 m d+q q + m 1 0 2 LFKN + Protocol 2 d+q q d2 m dm + d+q q m + 1 (d + 1)m + q 2m LFKN + Protocol 2 + Aurora d+q q d2 m d log(m) + d+q q + m log(m) + 1 (d + 1) log(m) 2 log(m) +q + 2 Protocol 3 + Gemini d+2q 2q d2 m d 2m + d+q q m + 1 O(d 2 )m + q 4m − 1 Protocol 3 + Gemini + Aurora d+2q 2q d2 m d 2 log(m) + d+q q + m log(m) + 1 O(d 2 ) log(m) 4 log(m) +q + 1 Protocol 4 + Gemini d+q q d2 m dm + d+q q m + 1 (d + 1)m + q m − 1 First, we clarify that the DGM protocol contains a flaw that invalidates it as written. After that, we show that an adaptation of a fixed version of DGM is, in fact, an instance of the elusive Gemini-based linear-time univariate sumcheck.

00554#pg4>.

Final Summary

The paper presents three candidate approaches for univariate sumcheck over roots of unity <ref:2505.00554#pg2>. The core contribution is showing that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor <ref:2505. p. 3

Where the paper says it

4 Malcom Mohamed The upshot is that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor. Thus, any current use case of the Aurora protocol may benefit from the prover efficiency previously reserved for the world of multivariate data encodings.

00554#pg4>. This result implies that any current use case of the Aurora protocol may benefit from the prover efficiency previously reserved for the world of multivariate data encodings <ref:2505. p. 3
Where the paper says it

4 Malcom Mohamed The upshot is that linear-time univariate sumcheck—for pre-existing unex polynomials—is generically achievable by combining a suitable reduction and an adaptor. Thus, any current use case of the Aurora protocol may benefit from the prover efficiency previously reserved for the world of multivariate data encodings.

00554#pg4>. The paper demonstrates that Protocol 4 is clearly more efficient than Protocol 3 in reducing the univariate sumcheck claim to Gemini <ref:2505. p. 9
Where the paper says it

This is because the domain values will not yet have been mixed with the protocol’s randomness, possibly resulting in cheaper arithmetic operations when the original values are small. 4 Reducing Sumcheck to mlin This section first describes a univariate domain identity PIOP (and thereby also a sumcheck) based on DGM’s ideas to reduce to Gemini.

00554#pg4>. The combination of Protocol 4 with Gemini is also concretely more efficient than the combination of the standard multivariate sumcheck with the adaptor from Section 3 <ref:2505.00554#pg4>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Multilinear to univariate reduction protocol allows for combining standard multivariate sumcheck with univariate extensions to create protocols that can be used with Gemini, enabling prover efficiency previously reserved for multivariate data encodings. This means AI systems could leverage faster proving techniques when working with polynomial data encoded in a way that benefits from both multilinear and univariate structures.

  2. Direct linear-time univariate sumchecks for pre-existing unex polynomials can be achieved by combining a suitable reduction and an adaptor, allowing current uses of the Aurora protocol to benefit from prover efficiency previously reserved for the world of multivariate data encodings. This capability could lead to faster verification or proving times for specific types of univariate polynomial constraints.

  3. Round reductions from m to log(m) are naturally supported when composing the multivariate sumcheck protocol with a new adaptor, allowing AI systems utilizing these structures to achieve quasilinear single-round sumchecks in O(2m) time instead of potentially slower bounds. This would significantly improve the bandwidth and verifier friendliness of certain cryptographic proofs used in AI applications.

  4. Domain identity protocols can be reduced to Gemini, enabling the proof that g(f1,..., fq) mod (x 2m - 1) = h to be transformed into a claim involving mlin[f1](r1,..., rm), which can then be handled by Gemini. This would allow AI systems to prove complex domain identities efficiently using the structure of Gemini's tensor product subprotocol.

  5. Direct reduction methods, such as Protocol 4, show that the univariate sumcheck claim can be reduced to a simpler form involving mlin[f1](r1w i, w2i), allowing for efficient verification in O(dm) time with m rounds. This suggests AI systems could perform complex polynomial evaluations based on these structures with high efficiency.

Abstract

Two candidate approaches for univariate sumcheck over roots of unity are presented. The first takes the form of a multilinear evaluation protocol, which can be combined with the standard multivariate sumcheck protocol. The other consists of a direct reduction from univariate sumcheck to multilinear evaluation, which can be combined with Gemini (Bootle et al., Eurocrypt 2022). Optionally, natural round reductions from m to (m) are supported, while retaining linear prover time.

Related papers