Strong decay widths of S- and P-wave singly- and doubly-heavy charm and bottom baryons

arXiv:2410.09622 · hep-ph, hep-ex, nucl-th · Submitted 2024-10-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "Strong decay widths of S- and P-wave singly- and doubly-heavy charm and bottom baryons".

Mira: Here's the gist of the paper. We present a study of two-body decay widths of heavy baryons into another heavy baryon and a light pseudoscalar meson in the framework of the non-relativistic quark model in combination with the elementary emission model for the strong couplings The calculated widths of singly-heavy baryons are found to be in reasonable agreement with the observed widths The decay widths of doubly-heavy baryons are suppressed with respect to those of the singly-heavy baryons by the ratios of the quark masses appearing in the orbital contributions Strong Couplings and Theoretical Framework The study employs the elementary emission model (EEM) to investigate two-body strong decays, where a baryon emits a meson through one of its constituent quarks The strong interaction Hamiltonian is introduced using a vector-axial coupling term derived from the QCD Lagrangian density This framework restricts the study to a non-relativistic approximation, where the interaction Hamiltonian is given by an expression involving spin, coordinate, and momentum operators The helicity amplitude for a two-body strong decay B → B′ + M into a ground-state baryon B′ with L' = 0, J' = S' and a pseudoscalar meson M is given by an expression involving the radial integrals and spin-flavor matrix elements The coefficients Zj,µ(k) depend on the radial integrals, Uαj and Tαj,µ, which can be obtained in closed analytic form for the harmonic oscillator quark model Flavor Symmetry and Matrix Elements The spin-flavor matrix elements are evaluated using the SU(3) flavor symmetry with the phase convention of Baird and Biedenharn The flavor matrix elements can be expressed using a formula involving SU(3) factors and a reduced matrix element The SU(3) isocalar factors relevant for the strong couplings of heavy baryons can be obtained with the help of Refs.

117, 118: For singly-heavy baryons, the decay process qqQ → qq′Q + qq¯′ is analyzed by considering configurations corresponding to light-flavor sextet or anti-triplet states The flavor operators for the light mesons are also presented in an appendix using the Baird-Biedenharn phase convention Decay Width Calculations and Comparison with Data The width of a baryon decaying into a baryon and a (pseudoscalar) meson is given by an expression involving the phase-space factor ρ and the helicity amplitude Aν(k) The coupling constants g and h were determined in a global fit to experimental data, yielding g = 3.32 GeV−1 and h = −0.16 GeV−1 The EEM results are compared with those of two other calculations, the 3P0 model of Refs.

53, 54: and the chiral quark model (χQM) of Refs.

68, 69: A comparison shows that there is a qualitative agreement for the experimentally known decays with the exception of the decay widths of Ξc(3055) and Ξc(3080) which are overpredicted by a large amount in the 3P0 model Singly-Heavy and Doubly-Heavy Baryon Analysis The study covers decays for all 1S- and 1P-wave baryons with one or two heavy quarks, either charm (c) or bottom (b) For singly-heavy baryons, the results show a good overall agreement with the available experimental data For doubly-heavy baryons, the EEM decay widths are either forbidden or suppressed by quark mass dependent factors in the radial integrals In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV In conclusion, a global analysis of two-body strong decay widths for singly and doubly heavy baryons was presented The theoretical values correspond exclusively to two-body decay channels, whereas the experimental widths incorporate other decay channels as well The assignment of quantum numbers is mostly based on systematics guided by quark model considerations The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements Pruning redundant reasoning tokens The paper presents a simultaneous study of strong couplings of all 1S- and 1P-wave baryons with one or two heavy quarks, either charm (c) or bottom (b) The total widths are compared with the available experimental data as well as with other theoretical studies How the training signal is built The authors construct and minimize a likelihood function for the strong decay widths, incorporating measured values to obtain optimal values of g and h, which are then used to calculate decay widths for all heavy baryons considered The quark masses used are given by mu = md = 291.53 MeV, ms = 461.24 MeV, mc = 1606.80 MeV and mb = 4944.34 MeV Where the gains come from The experimental information is somewhat more limited in the bottom sector compared to that in the charm sector This is expected given the higher production rates of charm baryons in high-energy collision experiments than bottom baryons as they are produced more frequently due to lower mass thresholds Additionally, charm baryons often have more accessible decay channels, making them easier to study while bottom baryons typically decay through more complex processes that yield fewer observable final states The EEM results are compared with those of the 3P0 model and the chiral quark model, both of which present a comprehensive study of (almost all) S- and P-wave singly-heavy baryons The predictions for doubly-heavy baryons in the EEM are either forbidden or suppressed by quark mass dependent factors in the radial integrals In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements In this contribution, we presented the results of a simultaneous global analysis of two-body strong decay widths of singly and doubly heavy baryons, ΣQ, Ξ′Q, omegaQ, ΛQ, ΞQ y ΞQQ, omegaQQ The calculations were limited to the ground state 1S-wave and excited state 1P-wave baryons A comparison with the available experimental information shows a reasonable agreement with the data In general, the estimated strong decay widths in the elementary emission model are smaller than the observed experimental widths across different charm and bottom baryon states The theoretical values correspond exclusively to two-body decay channels, whereas the experimental widths incorporate other decay channels as well The predictions for doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV Pruning redundant reasoning tokens The calculation of decay widths is done by adding an extra factor that depends on the strength of the quark-meson couplings and the pion and kaon decay constants The relative sign of g and h is the same The calculations were limited to the ground state 1S-wave and excited state 1P-wave baryons Where the gains come from The comparison of predictions of the three models for singly-heavy baryons shows, with the exception of only a few cases, a qualitative agreement for the experimentally known decays However, for the unknown decays the results differ wildly, at times by an order of magnitude The decay widths for doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV The experimental information is somewhat more limited in the bottom sector compared to that in the charm sector This is expected given the higher production rates of charm baryons in high-energy collision experiments than bottom baryons as they are produced more frequently due to lower mass thresholds Additionally, charm baryons often have more accessible decay channels, making them easier to study while bottom baryons typically decay through more complex processes that yield fewer observable final states The assignment of quantum numbers is mostly based on systematics guided by quark model considerations In this contribution, we presented the results of a simultaneous global analysis of two-body strong decay widths of singly and doubly heavy baryons, ΣQ, Ξ′Q, omegaQ, ΛQ, ΞQ y ΞQQ, omegaQQ The calculations were limited to the ground state 1S-wave and excited state 1P-wave baryons A comparison with the available experimental information shows a reasonable agreement with the data In general, the estimated strong decay widths in the elementary emission model are smaller than the observed experimental widths across different charm and bottom baryon states The theoretical values correspond exclusively to two-body decay channels, whereas the experimental widths incorporate other decay channels as well The predictions for doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements Where the gains come from The comparison of predictions of the three models for singly-heavy baryons shows, with the exception of only a few cases, a qualitative agreement for the experimentally known decays However, for the unknown decays the results differ wildly, at times by an order of magnitude The decay widths for doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV The experimental information is somewhat more limited in the bottom sector compared to that in the charm sector <ref:8】 This is expected given the higher production rates of charm baryons in high-energy collision experiments than bottom baryons as they are produced more frequently due to lower mass thresholds <ref:3】 Additionally, charm baryons often have more accessible decay channels, making them easier to study while bottom baryons typically decay through more complex processes that yield fewer observable final states <ref:8】 The assignment of quantum numbers is mostly based on systematics guided by quark model considerations <ref:20】

Title and authors: Kai: Moving on to the actual content of "Strong decay widths of S- and P-wave singly- and doubly-heavy charm and bottom baryons," we see how they tackle this problem in detail. They start by setting up the framework using the elementary emission model for two-body strong decays.

Mira: They introduce a vector axial coupling term derived from the QCD Lagrangian density to describe that interaction between quarks and the emitted light pseudoscalar meson.

Lev: That interaction Hamiltonian, which they write as equation two, is restricted to a non-relativistic approximation involving spin, coordinate, and momentum operators. We're talking about a specific mathematical structure for how the decay happens at the quark level.

Kai: They define the helicity amplitude for a decay B into B' plus a meson M, which depends on radial integrals and spin flavor matrix elements.

Mira: Specifically, they use closed analytic forms for those radial integrals, which they get from the harmonic oscillator quark model. This gives them a concrete starting point for the calculation.

Lev: That reliance on the harmonic oscillator model is a major assumption here; it dictates the shape of those radial integrals, so if that model isn't perfect for these heavy systems, your width predictions might be off.

Kai: They then use SU(three) flavor symmetry with the Baird and Biedenharn phase convention to evaluate those spin-flavor matrix elements <ref:2410.09622#pg1>.

Mira: They express these matrix elements using SU(three) factors and a reduced matrix element, which is how they connect the abstract symmetry to the actual physics of the heavy baryon structure <ref:2410.09622#pg1>.

Lev: When you're looking at those SU(three) isoscalar factors for strong couplings, those are essentially the bridge connecting your quark model assumptions to what you expect in terms of flavor dynamics <ref:2410.09622#pg1>.

Kai: For singly-heavy baryons, they analyze decays like qqQ into qq'Q plus another pair, specifically considering configurations like light-flavor sextet or anti-triplet states.

Mira: They also present the flavor operators for the light mesons using that same Baird and Biedenharn phase convention in an appendix to clarify those conventions.

Lev: It’s good they put that detail in there, because when you're doing a global fit, every piece of notation needs to be absolutely clear so everyone understands what's being measured.

The paper's summary: Kai: To summarize what this paper does, it performs a simultaneous global analysis of two-body strong decay widths for both singly and doubly heavy charm and bottom baryons.

Mira: They look at the ground state one S-wave and excited one P-wave baryons for both sectors, which covers a wide range of states we're interested in.

Lev: The main result here is that their calculated decay widths are generally smaller than the experimental values they found across different charm and bottom baryon states.

Kai: This is important because it confirms that the elementary emission model results are mostly in good agreement with available experimental data for singly-heavy baryons overall.

Mira: However, for doubly-heavy baryons, their EEM decay widths are either forbidden or suppressed by quark mass dependent factors within those radial integrals.

Lev: That suppression is where they differ most from other models; the chiral quark model and the constituent quark model give much larger values there, sometimes in the order of one hundred millielectron-volts.

Kai: So, while they nail the singly-heavy systems, we get a clear picture of how those doubly-heavy systems behave under this specific theoretical framework.

Mira: The overall conclusion is that their theoretical values correspond exclusively to two-body decay channels, whereas the experimental widths you measure actually include other decay channels too.

Lev: That's a necessary caveat for any comparison with real data; you can't just compare the calculated total width to what you see in a single experiment.

The paper's improvements: Kai: The paper suggests several ways they could improve things, starting with getting better input data by integrating experimental values through a likelihood function.

Mira: They determined optimal values for the strong coupling constants g and h by fitting this likelihood function against measured baryon decay widths.

Lev: That's smart work for extracting parameters; you can't just pick arbitrary numbers, you need a robust method to determine those coupling constants from the data itself.

Kai: They also suggest using the EEM results to compare against predictions from the 3P0 model and chiral quark model for better classification of excited heavy baryons <ref:2410.09622#pg1>.

Mira: This comparison allows for better discrimination between theoretically predicted states and experimentally observed resonances, especially when looking at those more complex excited states.

Lev: That helps narrow down which theoretical prediction matches which experimental signal, but it still depends on the accuracy of those other models they are comparing against.

Kai: For assigning quantum numbers to unknown heavy baryon states, they suggest comparing experimental spin and parity measurements with predictions from harmonic oscillator quark models.

Mira: They flag that more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements for those assignments to be truly solid.

Conclusion: Kai: To wrap up this study of "Strong decay widths of S- and P-wave singly- and doubly-heavy charm and bottom baryons," the main implication is that the elementary emission model provides a consistent picture for these decays within its assumptions.

Mira: They show reasonable agreement for the known decays, but they clearly delineate where their results are suppressed, particularly in the doubly heavy sector compared to other theoretical approaches.

Lev: The key thing to remember is that their predictions only cover two-body decay channels, so any broader experimental measurement must account for those other channels too.

Kai: And for the future, they stress that more information on radiative and strong decay widths and spin and parity measurements will be crucial for solidifying the assignment of quantum numbers.

Mira: It’s a focused study; it gives us a good baseline, but we need to look at those other decay channels to get the full picture of these baryons.

Lev: Exactly. So, the next step is taking those constraints and seeing if they can guide better experimental searches for these states.

Kai: That’s what we're looking at now as we move on to the next paper in the queue.

Emmanuel Ortiz-Pacheco, Roelof Bijker

Institute for Theoretical Physics, ELTE éotvóos Lorǡnd University · MTA--ELTE Lendülulet ♈ment Matter Research Group · Instituto de Ciencias Nucleares, Universidad Nacional Aut༺gona de Mພxico

hep-ph, hep-ex, nucl-th

Submitted: 2024-10-12

Updated: 2026-09-01

Comments: 22 pages, 4 figures, 9 tables, revised version, accepted for publication in European Physical Journal C

Journal ref: European Physical Journal C 86, 1091 (2026)

DOI: 10.1140/epjc/s10052-026-16344-1

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 61/100

The gist: We present a study of two-body decay widths of heavy baryons into another heavy baryon and a light pseudoscalar meson in the framework of the non-relativistic quark model in combination with the…

Key concepts

Elementary Emission Model (EEM)
This model investigates strong decays where a baryon emits a meson through one of its constituent quarks. It uses the QCD Lagrangian to define the interaction, restricting the study to a non-relativistic approximation involving spin, coordinate, and momentum operators.
SU(3) Flavor Symmetry
This symmetry is used to evaluate spin-flavor matrix elements in heavy baryons. It helps relate different baryon states by using SU(3) factors derived from quark model considerations, allowing for the analysis of decay processes involving light-flavor sextet or anti-triplet states.
Quark Mass Dependence
The suppression of doubly-heavy baryon decay widths is explained by factors dependent on the ratio of quark masses appearing in orbital contributions. These mass factors significantly reduce the predicted widths for doubly heavy baryons compared to those calculated by other models like the chiral quark model.
Global Fit for Coupling Constants
The coupling constants 'g' and 'h' were determined by fitting the elementary emission model results to a global set of experimental baryon decay widths. This process optimizes the theoretical parameters based on available experimental data, improving the accuracy of subsequent decay width calculations.

Terminology

Summary

We present a study of two-body decay widths of heavy baryons into another heavy baryon and a light pseudoscalar meson in the framework of the non-relativistic quark model in combination with the elementary emission model for the strong couplings. p. 0 The calculated widths of singly-heavy baryons are found to be in reasonable agreement with the observed widths, while those of doubly-heavy baryons are suppressed by ratios of quark masses appearing in orbital contributions. p. 0

Introduction to Heavy Baryon Spectroscopy

The discovery of many new hadrons with heavy quarks by LHCb, CMS, CDF, Belle and BaBar Collaborations has stimulated an enormous activity in the field of hadronic physics both experimentally and theoretically. The study of heavy baryons and mesons provides an important tool to improve our understanding of hadron structure, the dynamics of the strong interaction and heavy-quark symmetry. p. 0 Baryons with a single heavy quark, either charm c or bottom b, belong to a SU(3) flavor sextet or a flavor anti-triplet. p. 0 In addition, in recent years the spectroscopy of single heavy baryons was enriched by the discovery of many orbitally excited states. p. 1

Framework for Strong Coupling Calculation

The elementary emission model (EEM) is employed to study such decays. Within this framework, a baryon, treated as a composite system of quarks, emits a meson through one of its constituent quarks. p. 1 The strong interaction Hamiltonian is given by [111]. p. 2 The helicity amplitude for a two-body strong decay B → B′ + M into a ground-state baryon B′ with L′ = 0, J′ = S′ and a pseudoscalar meson M is given by Eq. p. 2 (6).

Flavor Symmetry and Matrix Elements

The flavor matrix elements can be evaluated by using the Wigner-Eckart theorem and SU(3) flavor factors. The SU(3) isoscalar factors relevant for the strong couplings of heavy baryons can be obtained with the help of Refs. p. 3 [117, 118]. p. 3 For singly-heavy baryons, the contribution arises from the first two quarks (j = 1, 2) and for doubly-heavy baryons from the third quark (j = 3). p. 5

Decay Width Calculations and Comparison

The width of a baryon decaying into a baryon and a (pseudoscalar) meson is given by Eq. (22). The coupling constants g and h were determined in a global fit to the 52 experimental baryon decay widths. p. 2 A comparison of the predictions of the three models for the singly-heavy baryons shows a qualitative agreement for experimentally known decays with the exception of only a few cases, while for unknown decays results differ wildly. p. 7

Conclusion on Model Performance

In general, in recent years a wealth of new information on heavy baryons has been obtained by several experimental collaborations. The predictions of the decay widths for the doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals. p. 0 In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV. p. 1 p. 1 p. 1 p. 1 The experimental information is somewhat more limited in the bottom sector compared to that in the charm sector. p. 0 p. 0 The assignment of quantum numbers is mostly based on systematics guided by quark model considerations. p. 9 p. 9

Summary and Conclusions

In this contribution, we presented the results of a simultaneous global analysis of two-body strong decay widths of singly and doubly heavy baryons, ΣQ, Ξ′Q, omegaQ, ΛQ, ΞQ y ΞQQ, omegaQQ. The calculations were limited to the ground state 1S-wave and excited state 1P-wave baryons. p. 7 p. 7 p. 7 In general, the estimated strong decay widths in the elementary emission model are smaller than the observed experimental widths across different charm and bottom baryon states. p. 0 p. 0 p. 0 The theoretical values correspond exclusively to two-body decay channels, whereas the experimental widths incorporate other decay channels as well. p. 7 p. 7 p. 7 The predictions of the doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals. p. 0 p. 0 p. 0 In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV. The assignment of quantum numbers is mostly based on systematics guided by quark model considerations. The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements. p. 9 p. 9 p. 9 p. 9 p. 9

Radial Integrals and Wave Functions

The radial integrals appearing in Eq. (7) are defined as Uαj = ⟨ψgsUˆj ψα⟩, Tαj,µ = ⟨ψgsTˆαj,µψα⟩. For harmonic oscillator wave functions the radial integrals can be obtained in closed analytic form. p. 3 The baryon flavor wave functions are presented using the Baird-Biedenharn phase convention for the SU(3) flavor couplings. p. 1

Comparison of Theoretical Approaches

A comparison of the predictions of the three models for the singly-heavy baryons in Tables 3-6 shows a qualitative agreement for experimentally known decays with the exception of only a few cases, while for unknown decays results differ wildly. However, for unknown decays the results differ wildly, at times by an order of magnitude. In general, the 3P0 model predicts much larger widths than the EEM and χQM. p. 6 The predictions of the decay widths for the doubly-heavy baryons in Tables 7 and 8 show a very small width for the EEM and a much larger value of the order of 100s MeV for the χQM [67] and the constituent quark model [130]. p. 6 The experimental information is somewhat more limited in the bottom sector compared to that in the charm sector. The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements.

Final Assessment

In conclusion, in recent years a wealth of new information on heavy baryons has been obtained by several experimental collaborations. With the exception of Ξc(2970) and Ξc(3055) for which the spin and parity have been measured, the assignment of quantum numbers is mostly based on systematics guided by quark model considerations. p. 9 The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements. The paper presents a simultaneous global analysis of two-body strong decay widths of singly and doubly heavy baryons. p. 5 p. 5 The calculations were limited to the ground state 1S-wave and excited state 1P-wave baryons. In general, the estimated strong decay widths in the elementary emission model are smaller than the observed experimental widths across different charm and bottom baryon states. The theoretical values correspond exclusively to two-body decay channels, whereas the experimental widths incorporate other decay channels as well. The predictions of the doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals. In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV. The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements.

References

[1] H.-X. Chen, W. Chen, X. Liu, Y.-R. Liu, and S.-L. Zhu, Reports on Progress in Physics 86, 026201 (2023). p. 8

[5] R. Mizuk et al., Belle Collaboration, Phys. p. 1 p. 1 p. 1 p. 1 p. 1 p. 1 p. 1 Rev. Lett. 94, 122002 (2005).

[14] Y Kato et al., Belle Collaboration, Phys. Rev. D 94, 032002 (2016).

[53] H.-Garcilazo et al., Phys. Rev. D 107, 034031 (2023). p. 1

[54] H.-Garcilazo et al., Phys. Rev. D 110, 114005 (2024). p. 1

[67] L.-Y. Xiao et al., Phys. Rev. D 96, 094005 (2017).

[88] H. Mutuk, The European Physical Journal Plus 137 (2021), 10. p. 51140/epjp/s13360-021-02256-4.

[99] J. K¨orner, M. Kr¨amer, and D. Pirjol, Progress in Particle and Nuclear Physics 33, 787 (1994). p. 0

[108] E. Ortiz-Pacheco and R. p. 0 Bijker, Phys. p. 0 Rev. D 108, 054014 (2023). p. 1

[115] A. J. Arifi, D. Suenaga, and A. Hosaka, Phys. Rev. D 103, 094003 (2021).

[16] Y Kato et al., Belle Collaboration, Phys. Rev. D 89, 052003 (2014).

[17] R. Aaij et al., Journal of High Energy Physics 2017, 30 (2017). p. 0

[89] Y Kim et al., Phys. Rev. D 107, 074015 (2023). p. 1

[94] M. Padmanath et al., Phys. Rev. D 91, 094502 (2015).

[83] P.-L. Yin et al., Phys. Rev. D 100, 034008 (2019). p. 7

[87] G.-J. Wang et al., Phys. Rev. D 99, 034021 (2019). p. 7

[56] D. Ebert, R. N. Faustov, and V. O. Galkin, Phys. Rev. D 84, 014025 (2011).

[67] L.-Y Xiao et al., Phys. Rev. D 95, 116010 (2017).

[68] K.-L. Wang et al., Phys. Rev. D 95, 116016 (2017).

[93] C. Alexandrou et al., Phys. Rev. D 90, 074501 (2014).

[82] H.-Garcilazo et al., Journal of Physics G: Nuclear and Particle Physics 34, 961 (2007). p. 0

[13] T. J. Moon et al., Belle Collaboration, Phys. Rev. D 103, L111101 (2026). p. 0 p. 0

[55] D. Ebert et al., Phys. Rev. D 66, 014008 (2002).

[98] R. A. Brice˜no et al., Phys. Rev. D 86, 094504 (2012). p. 0

[13] T. J. Moon et al., Belle Collaboration, Phys. Rev. D 103, L111101 (2026).

[57] G.-L. Yu et al., Nuclear Physics B 990, 116183 (2023). p. 0

[74] T. M. Aliev et al., Phys. Rev. D 79, 056005 (2009).

[84] W.-H. Liang and E. Oset, Phys. Rev. D 101, 054033 (2020).

[86] G.-S. Yang and H.-C. Kim, Physics Letters B 801, 135142 (2020). p. 0

[95] P. Perez-Rubio et al., Phys. Rev. D 92, 034504 (2015).

[66] H. Mutuk, The European Physical Journal A 56 (2020), 10. p. 51140/epja/s10050-020-38.

[77] T. M. Aliev et al., Phys. Rev. D 93, 056007 (29).

[29] R. Aaij et al., Journal of High Energy Physics 2020, 136 (2020). p. 0

[13] T. J. Moon et al., Belle Collaboration, Phys. Rev. D 103, L111101 (26).

[58] G.-L. Yu et al., International Journal of Modern Physics A 38, 2350082 (2023). p. 0

[74] T. M. Aliev et al., Phys. Rev. D 79, 056005 (1).

[84] W.-H. Liang and E. Oset, Phys. Rev. D 101, 054033 (2).

[86] G.-S. Yang and H.-C. Kim, Physics Letters B 801, 135142 (2). p. 0

[95] P. Perez-Rubio et al., Phys. Rev. D 92, 034504 (2).

[67] L.-Y Xiao et al., Phys. Rev. D 96, 094005 (1).

[88] H. Mutuk, The European Physical Journal A 56 (2). p. 5

[130] Y.-L. Shu et al., Communications in Theoretical Physics 78, 015301 (22). p. 0

[69] K.-L. Wang et al., Phys. Rev. D 96, 116016 (2).

[74] T. M. Aliev et al., Phys. Rev. D 79, 056005 (3).

[88] H.-M. Yang and H.-X. Chen, Phys. Rev. D 101, 114013 (2).

[92] Y Namekawa et al., Phys. Rev. D 87, 094512 (2).

[93] C Alexandrou et al., Phys. Rev. D 90, 074501 (3).

[82] H.-Garcilazo et al., Journal of Physics G: Nuclear and Particle Physics 34, 961 (1). p. 0

[13] T. J. Moon et al., Belle Collaboration, Phys. Rev. D 103, L111102 (2).

[55] D. Ebert et al., Phys. Rev. D 66, 014008 (4).

[98] R. A. Brice˜no et al., Phys. Rev. D 86, 094504 (1)].

Table of Key Parameters

The values of the harmonic oscillator size parameters, αρ and αλ, are taken from Table VIII of Ref. [108]. The baryon masses and corresponding wave functions were obtained from a previous study in the framework of a non-relativistic harmonic oscillator quark model [108]. p. 0

The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements. The paper presents a simultaneous global analysis of two-body strong decay widths of singly and doubly heavy baryons. The calculations were limited to the ground state 1S-wave and excited state 1P-wave baryons. In general, the estimated strong decay widths in the elementary emission model are smaller than the observed experimental widths across different charm and bottom baryon states. The theoretical values correspond exclusively to two-body decay channels, whereas the experimental widths incorporate other decay channels as well. The predictions of the doubly-heavy baryons in the elementary emission model are either forbidden or suppressed by quark mass dependent factors in the radial integrals. In contrast, the chiral quark model and the constituent quark model give much larger values, in many cases of the order of 100s MeV. The assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved prediction of heavy baryon decay widths by integrating experimental data through a likelihood function incorporating both singly and doubly-heavy baryons to obtain optimal values for strong coupling constants g and h, as stated in The coupling constants g and h were determined in a global fit to the available baryon decay widths from experimental data as discussed in more detail in Section 3.

  2. Enhanced classification of excited heavy baryons by using the elementary emission model results to compare against predictions from the chiral quark model and 3P0 model, allowing for better discrimination between theoretically predicted states and experimentally observed resonances.

  3. More accurate assignment of quantum numbers for unknown heavy baryon states by systematically comparing experimental spin and parity measurements with predictions derived from harmonic oscillator quark models, as suggested by the assignment of quantum numbers more experimental information is needed on radiative and strong decay widths, as well as spin and parity measurements.

  4. Better understanding of the suppression mechanisms for doubly-heavy baryon decays by analyzing how the mass dependent factor in Equations (32) and (33) suppresses 2lambda and 4lambda configurations compared to the chiral quark model or constituent quark model predictions.

Sources

Related papers