FUSE-PnPL: Flexible, Unified, Statistically Consistent, and Asymptotically Efficient Camera Pose Estimation from Points and Lines

arXiv:2407.16151 · cs.RO · Submitted 2024-07-23 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: I'm Rosa.

Dev: And I'm Dev, here with Taro.

Rosa: We're looking at the paper: "FUSE-PnPL: Flexible, Unified, Statistically Consistent, and Asymptotically Efficient Camera Pose Estimation from Points and Lines".

Dev: Here's the gist of the paper. Optimal camera-robot pose estimation in linear time proposes AOPnP(L), an optimal linear-time camera-robot pose estimation algorithm from points and lines By representing a line with two distinct points on it, the algorithm unifies the noise model for point and line measurements where noises are added to 2D points in the image It features theoretical optimality in the sense that its mean squared error converges to the Cramér-Rao lower bound and owns a linear time complexity Extensive experiments demonstrate its superiority in both static localization and dynamic odometry systems.

Rosa: Problem Formulation The paper addresses the camera-robot pose estimation problem with large sample features by proposing a uniform estimator that can take point features, line features, or both as measurements The core of the framework is a two-step estimation scheme which asymptotically solves the maximum likelihood (ML) problem.

Dev: This scheme involves a first step to devise a consistent pose estimate that converges to the true pose as features increase, followed by a single Gauss-Newton (GN) iteration to refine the initial estimate.

Rosa: How the Training Signal is Built The ML problem (13) is formulated as minimizing a weighted sum of squared residuals from both point and line correspondences subject to the rigid transformation constraints The residuals for points are defined by the relationship between 2D image projections and 3D world coordinates For lines, a residual is formulated based on Plücker coordinates to account for line parameterization The ML problem is constructed by combining the point residual (10) and the line residual (12) into a single objective function.

Paper summary: Rosa: So wrapping up FUSE-PnPL, this paper focuses on creating a uniform estimator that takes both point features and line features as measurements <ref:2407.16151#pg2>. They propose the AOPnP(L) algorithm which aims to be optimal in linear time <ref:2407.16151#pg3>.

Dev: The key findings are that this method achieves asymptotic efficiency by using a two-step scheme with one Gauss Newton iteration after an initial consistent estimate <ref:2407.16151#pg3>. This means the error in the estimate converges to the Cramér-Rao bound as you increase your feature count <ref:2407.16151#pg3>.

Taro: For someone listening, what does this really mean for autonomous systems? It means you can use a system that balances high accuracy with computational speed when dealing with a lot of visual data <ref:2407.16151#pg3>.

Rosa: It boils down to having an estimator that is both fast enough for real-time use and theoretically optimal in terms of accuracy when you have a large amount of visual input <ref:2407.16151#pg3>.

Dev: The authors also pointed out that this method achieves linear time complexity, which is O of n plus m, meaning the consuming time grows linearly with how many points and lines you have <ref:2407.16151#pg2>. That linear scaling is key for large-scale applications <ref:2407.16151#pg3>.

Taro: I'm still curious about those stability modules; what happens when the world throws something totally unexpected at the system?

Rosa: Those modules handle that by normalizing the scale of your measurements and solving a generalized eigenvalue problem to estimate noise variance <ref:2407.16151#pg3>. That’s how they manage those unpredictable moments <ref:2407.16151#pg3>.

Dev: So, FUSE-PnPL is trying to solve the challenge of using both points and lines together in a way that is fast and accurate for large datasets <ref:2407.16151#pg2>. It tackles how to do this better than just using points or just using lines alone <ref:2407.16151#pg2>.

Taro: The paper also mentioned a limitation, which is that they are focused on solving the problem from the perspective of large sample features <ref:2407.16151#pg3>. So if you only have a small number of features, this specific framework might not be as good as other methods <ref:2407.16151#pg3>.

Rosa: That’s right; they are emphasizing the large sample case for their theoretical optimality <ref:2407.16151#pg3>. It’s a focus on the big picture data scenario rather than tiny, specific situations <ref:2407.16151#pg3>.

Dev: So, the main point is that for many real-world scenarios where you have plenty of visual information, this algorithm gives you a very solid balance between how accurate your pose estimate is and how quickly you can compute it <ref:2407.16151#pg3>.

Taro: I think that's the main thing to grasp—it gives engineers a tool they can use when they have tons of data without having to deal with extremely slow computation times <ref:2407.16151#pg3>.

Conclusion: Rosa: So, we’ve seen how this paper tackles combining points and lines for camera pose estimation to get a single algorithm <ref:2407.16151#pg2>. The authors call it AOPnP(L).

Dev: They argue that fusing these features is useful because they cover different bases; lines are good when texture is missing, which points aren't always great at <ref:2407.16151#pg2>.

Taro: I’m wondering what that means for a system running in real-time; does it keep up with fast movement in an odometry loop?

Rosa: They show the algorithm uses a two-step scheme where the first part gets you a consistent pose estimate quickly, and then only one Gauss Newton iteration is needed to refine it <ref:2407.16151#pg3>. This structure supports fast processing for real-time applications <ref:2407.16151#pg3>.

Dev: They also emphasize that this framework is asymptotically efficient, meaning the error in their estimate approaches the Cramér-Rao lower bound as you increase your feature count <ref:2407.16151#pg3>. This suggests they’ve done a lot of work on proving the theoretical optimality of the solution <ref:2407.16151#pg3>.

Taro: That sounds mathematically sound, but I still want to know about the stability when things go wrong; what happens when you feed it bad data?

Rosa: They incorporate two modules specifically for stability; there's a data preprocessing step to normalize the scale of your measurements and another one that estimates the noise variance by solving a generalized eigenvalue problem <ref:2407.16151#pg3>. These help keep things stable when the input isn't perfect <ref:2407.16151#pg3>.

Dev: So, if we put it together, AOPnP(L) is about creating a system that’s both fast enough for real-time use and theoretically optimal in terms of accuracy for large datasets <ref:2407.16151#pg3>. It’s trying to solve the problem of how to use both points and lines together better than either one alone <ref:2407.16151#pg2>.

Taro: So, the big picture is that they've built a framework that can take a lot of information—points and lines—and give you a good pose estimate efficiently, even when the world isn't perfectly clean <ref:2407.16151#pg3>. What’s next in this research?

Rosa: Future work they mention is about building a better frontend; they think having a system that can extract and match a really large number of high-quality features would unlock its full potential <ref:2407.16151#pg3>.

Dev: They also noted that for cases with very few features, maybe adopting a more concise way to parameterize the pose could improve accuracy while still keeping the system consistent and asymptotically efficient <ref:2407.16151#pg3>.

Guangyang Zeng, Biqiang Mu, Qingcheng Zeng, Yuchen Song, Chulin Dai, Guodong Shi, Junfeng Wu

School of Data Science, Chinese University of Hong Kong, Shenzhen · Key Laboratory of Systems and Control, Institute of Systems Science, Academy of Mathematics and Systems Science, Chinese Academy of Sciences · System Hub, Hong Kong University of Science and Technology (Guangzhou) · Australian Center for Field Robotics, School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney

cs.RO

Submitted: 2024-07-23

Updated: 2026-11-09

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 80/100

The gist: Optimal camera-robot pose estimation in linear time proposes AOPnP(L), an optimal linear-time camera-robot pose estimation algorithm from points and lines By representing a line with two distinct…

Key concepts

Line Representation
Lines are represented not by a single line equation but by two distinct points lying on that line. This unified approach allows the algorithm to handle both point and line measurements within a single mathematical framework, simplifying the noise modeling across different feature types.
Uniform Estimator Framework
The paper develops a uniform estimation scheme capable of taking point features, line features, or both as input. This framework uses a two-step process: an initial step to find a consistent pose estimate and a final single Gauss-Newton iteration to refine it.
Asymptotic Efficiency
The algorithm proves that the two-step estimator is asymptotically efficient because the final refinement step achieves the Cramér-Rao bound. This means that as more data is collected, the estimation error converges at a rate proportional to 1/(sqrt(n) + m), indicating high accuracy for large feature sets.

Terminology

Summary

Optimal camera-robot pose estimation in linear time proposes AOPnP(L), an optimal linear-time camera-robot pose estimation algorithm from points and lines By representing a line with two distinct points on it, the algorithm unifies the noise model for point and line measurements where noises are added to 2D points in the image It features theoretical optimality in the sense that its mean squared error converges to the Cramér-Rao lower bound and owns a linear time complexity Extensive experiments demonstrate its superiority in both static localization and dynamic odometry systems. p. 0

Problem Formulation

The paper addresses the camera-robot pose estimation problem with large sample features by proposing a uniform estimator that can take point features, line features, or both as measurements The core of the framework is a two-step estimation scheme which asymptotically solves the maximum likelihood (ML) problem. This scheme involves a first step to devise a consistent pose estimate that converges to the true pose as features increase, followed by a single Gauss-Newton (GN) iteration to refine the initial estimate. p. 4

How the Training Signal is Built

The ML problem (13) is formulated as minimizing a weighted sum of squared residuals from both point and line correspondences subject to the rigid transformation constraints The residuals for points are defined by the relationship between 2D image projections and 3D world coordinates For lines, a residual is formulated based on Plücker coordinates to account for line parameterization The ML problem is constructed by combining the point residual (10) and the line residual (12) into a single objective function.

Where the Gains Come From

The main contributions of the paper include:

(i) Representing a line with two distinct points on it to unify the camera noise model and formulate a uniform ML problem for combined point and line measurements

(ii) Proposing a uniform pose estimation framework with linear time complexity and asymptotic optimality, utilizing a two-step scheme where the first step yields a consistent pose estimate

(iii) Incorporating two modules for stability: data preprocessing to normalize scale and consistent noise variance estimation by solving a generalized eigenvalue problem

(iv) Performing extensive experiments with synthetic and real-world data to verify theoretical developments and demonstrate superiority in accuracy and computation speed

Asymptotically Efficient Solution

The paper proves that the proposed two-step estimator is asymptotically efficient by performing a single GN iteration on the consistent estimate, which achieves the Cramér-Rao bound The convergence rate of both rotation and translation estimates to the true pose is shown to be of order 1/(√n + m) This asymptotic efficiency is achieved because the GN-refined estimate follows the ML estimate within an error term of op(1/(√n + m))

Time Complexity and Performance

The algorithm possesses a linear time complexity of O(n + m), meaning the consuming time grows linearly with respect to the number of point/line correspondences In simulations, the AOPnPPL estimator achieves lower Mean Squared Errors than AOPnP and AOPnL when combining both features Furthermore, in real-time visual odometry tests, the proposed algorithm consistently has the smallest Absolute Pose Estimation Error (APE) RMSE. The total time complexity is verified to be O(n + m), indicating its suitability for precision-demanding and real-time applications. p. 0

Future Work

In future work, it is desirable to equip the proposed algorithm with a frontend that can extract and match a relatively large number of high-quality features to fully unleash its potential Additionally, a more concise pose parameterization method may be adopted to improve estimation accuracy when the feature number is few while maintaining consistency and asymptotic efficiency. The problem of achieving consistency against outlier feature correspondences in some outlier-prone scenarios is also an interesting area for future research. p. 1

Conclusion

The proposed uniform camera-robot pose estimation algorithm is asymptotically unbiased and consistent in the first step, and the ensuing single GN iteration makes the estimate asymptotically efficient The estimator scales linearly with respect to the feature number, offering a balance between accuracy and efficiency. The algorithm is well-suited for precision-demanding and real-time SLAM applications due to its theoretical optimality in the large sample case. p. 0

References

[1] A. Z. Taddese, P. R. Slawinski, M. Pirotta, E. De Momi, K. L. Obstein, and P. Valdastri, “Enhanced real-time pose estimation for closed-loop robotic manipulation of magnetically actuated capsule endoscopes,” The International journal of robotics research, vol. p. 1 37, no. 8, pp. 890–911, 2018

[2] M. Zhang, X. Zuo, Y. Chen, Y. Liu, and M. Li, “Pose estimation for ground robots: On manifold representation, integration, reparameterization, and optimization,” IEEE Transactions on Robotics, vol. 37, no. 4, pp. 1081–1099, 2021

[3] S. Lilge, T. D. Barfoot, and J. Burgner-Kahrs, “Continuum robot state estimation using gaussian process regression on se (3),” The International Journal of Robotics Research, vol. p. 1 41, no. 13-14, pp. 1099–1120, 2022

[4] V. Lepetit, F. Moreno-Noguer, and P. Fua, “Epnp: An accurate o (n) solution to the pnp problem,” International Journal of Computer Vision, vol. p. 9 81, no. 2, pp. 155–166, 2024

[5] S. Urban, J. Leitloff, and S. Hinz, “Mlpnp-a real-time maximum likelihood solution to the perspective-n-point problem,” arXiv:1607. p. 008112, 2016

[6] G. Terzakis and M. Lourakis, “A consistently fast and globally optimal solution to the perspective-n-point problem,” in Computer Vision–ECCV 2020: 16th European Conference, Glasgow, UK, August 23–28, 2020: Springer

[7] C. Xu, L. Zhang, L. Cheng, and R. Koch, “Pose estimation from line correspondences: A complete analysis and a series of solutions,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. p. 3 39, no. 6, pp. 1209–1222, 2016

[8] P. Wang, G. Xu, Y. Cheng, and Q. Yu, “Camera pose estimation from lines: a fast, robust and general method,” Machine Vision and Applications, vol. p. 1 30, pp. 603–614, 2019

[9] Y. Liu, G. Chen, and A. Knoll, “Globally optimal camera orientation estimation from line correspondences by bnb algorithm,” IEEE Robotics and Automation Letters, vol. p. 0 6, no. 1, pp. 215–222, 2020

[10] A. Vakhitov, J. p. 3 Funke, and F. Moreno-Noguer, “Accurate and linear time pose estimation from points and lines,” in European Conference on Computer Vision: Springer

[11] A. Vakhitov, L. p. 3 Ferraz, A. Agudo, and F. Moreno-Noguer, “Uncertainty-aware camera pose estimation from points and lines,” in Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition: 2021

[12] T. Haidegger, “Autonomy for surgical robots: Concepts and paradigms,” IEEE Transactions on Medical Robotics and Bionics, vol. p. 1 1, no. 2, pp. 65–76, 2019

[13] B. Mildenhall, P. P. Srinivasan, M. Tancik, J. T. Barron, R. Ramamoorthi, and R. Ng, “Nerf: Representing scenes as neural radiance fields for view synthesis,” Communications of the ACM, vol. p. 1 65, no. 1, pp. 99–106, 2021

[14] S. Lynen, B. Zeisl, D. Aiger, M. Bosse, J. Hesch, M. Pollefeys, R. Siegwart, and T. Sattler, “Large-scale, real-time visual–inertial localization revisited,” The International Journal of Robotics Research vol 39 no 9 pp 1061–1084, 2020

[15] D. DeMenthon and L. S. Davis, “Exact and approximate solutions of the perspective-threepoint problem,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol 14, no 11 pp 1100–1992

[16] L. Kneip, D. Scaramuzza, and R. Siegwart, “A novel parametrization of the perspectivethree-point problem for a direct computation of absolute camera position and orientation,” in CVPR 2011: IEEE 2011 pp 2969–2976

[17] M. Bujnak, Z. Kukelova, and T. Pajdla, “A general solution to the p4p problem for camera with unknown focal length,” in 2008 IEEE Conference on Computer Vision and Pattern Recognition: IEEE 2008 pp 1–8

[18] B. Triggs, “Camera pose and calibration from 4 or 5 known 3d points,” in Proceedings of the Seventh IEEE International Conference on Computer Vision, vol 1, IEEE 1999 pp 278–284

[19] C.-P. Lu, G. D. Hager, and E. Mjolsness, “Fast and globally convergent pose estimation from video images,” IEEE transactions on pattern analysis and machine intelligence, vol 22 no 6 pp 610–622, 2000

[20] G. Pavlakos, X. Zhou, A. Chan, K. G. Derpanis, and K. Daniilidis, “6-dof object pose from semantic keypoints,” in 2017 IEEE international conference on robotics and automation (ICRA): IEEE 2017 pp 2011–2018

[25] M. Dhome, M. Richetin, J.-T. Lapreste, and G. Rives, “Determination of the attitude of 3d objects from a single perspective view,” IEEE transactions on pattern analysis and machine intelligence vol 11 no 12 pp 1265–1278, 1989

[26] L. Zhou, D. Koppel, and M. Kaess, “A complete, accurate and efficient solution for the perspective-n-line problem,” IEEE Robotics and Automation Letters vol 6 no 2 pp 699–706, 2020

[27] Y. Liu, T. S. Huang, and O. D. Faugeras, “Determination of camera location from 2-d to 3-d line and point correspondences,” IEEE Transactions on pattern analysis and machine intelligence vol 12 no 1 pp 28–37, 1990

[28] S. Christy and R. Horaud, “Iterative pose computation from line correspondences,” Computer vision and image understanding vol 73 no 1 pp 137–144, 2009

[29] B. Přibyl, P. p. 2 Zemčík, and M. Čadík, “Absolute pose estimation from line correspondences using direct linear transformation,” Computer Vision and Image Understanding vol 161 pp 130–144, 2017

[30] F. M. Mirzaei and S. I. Roumeliotis, “Globally optimal pose estimation from line correspondences,” in 2011 IEEE International Conference on Robotics and Automation: IEEE 2011 pp 5581–5588

[33] S. Ramalingam, S. Bouaziz, and P. Sturm, “Pose estimation using both points and lines for geo-localization,” in 2011 IEEE International Conference on Robotics and Automation: IEEE 2011 pp 4716–4723

[34] L. Zhou, J. Ye, and M. Kaess, “A stable algebraic camera pose estimation for minimal configurations of 2d/3d point and line correspondences,” in Computer Vision–ACCV 2018: 14th Asian Conference on Computer Vision: Perth, Australia December 2–6, 2018 Revised Selected Papers Part IV: Springer

[35] H. Li, J. Yao, X. Lu, and J. Wu, “Combining points and lines for camera pose estimation and optimization in monocular visual odometry,” in 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS): IEEE 2017 pp 1289–1296

[36] L. Sun and Z. Deng, “Certifiably optimal and robust camera pose estimation from points and lines,” IEEE Access vol 8 pp 124032–124054, 2020

[37] S. Agostinho, J. Gomes, and A. Del Bue, “Cvxpnpl: A unified convex solution to the absolute pose estimation problem from point and line correspondences,” Journal of Mathematical Imaging and Vision vol 65 no 3 pp 492–512, 2023

[38] L. Ferraz Colomina, X. Binefa, and F. Moreno-Noguer, “Leveraging feature uncertainty in the pnp problem,” in Proceedings of the BMVC 2014 British Machine Vision Conference, 2014 pp 1–13

[39] G. Zeng, S. Chen, B. Mu, G. Shi, and J. Wu, “Cpnp: Consistent pose estimator for perspective-n-point problem with bias elimination,” in 2023 IEEE International Conference on Robotics and Automation (ICRA): IEEE 2023 pp 1940–1946

[40] A. Bartoli and P. Sturm, “The 3d line motion matrix and alignment of line reconstructions,” International Journal of Computer Vision vol 57 pp 159–178, 2004

[41] T. Schops, J. L. Schonberger, S. Galliani, T. Sattler, K. Schindler, M. Pollefeys, and A. Geiger, “A multi-view stereo benchmark with high-resolution images and multi-camera videos,” in Proceedings of the IEEE conference on computer vision and pattern recognition: 2017 pp 3260–3269

[42] T. Werner and A. Zisserman, “New techniques for automated architectural reconstruction from photographs,” in Proceedings of the European Conference on Computer Vision (ECCV): Springer 2002 pp 541–555

[43] B. Mu, E.-W. Bai, W. X. Zheng, and Q. Zhu, “A globally consistent nonlinear least squares estimator for identification of nonlinear rational systems,” Automatica vol 77 pp 322–335, 2017

[44] P. Stoica and T. Söderström, “Bias correction in least-squares identification,” International Journal of Control vol 35 no 3 pp 449–457, 1982

[45] G. Zeng, B. Mu, L. Shi, J. Chen, and J. Wu, “Consistent and asymptotically efficient localization from range-difference measurements,” IEEE Transactions on Information Theory vol 70 no 4 pp 3032–3045, 2024

[46] U. Helmke, K. Hüper, P. Y. Lee, and J. Moore, “Essential matrix estimation using gaussnewton iterations on a manifold,” International Journal of Computer Vision vol 74 pp 117–136, 2007

[47] J. Zhao, “An efficient solution to non-minimal case essential matrix estimation,” IEEE Transactions on Pattern Analysis and Machine Intelligence vol 44 no 4 pp 1777–1920, 2020

[48] J. Nocedal and S.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Develop a uniform camera-robot pose estimation algorithm capable of taking points, lines, or both as inputs to solve a maximum likelihood problem for combined measurements with linear time complexity. This system can provide highly precise and real-time robot pose estimation by optimally solving the ML problem as the feature number increases.

  2. Implement an initial consistent estimate that converges to the true pose as measurement numbers increase, followed by a single Gauss-Newton iteration to refine this estimate, thereby achieving asymptotic efficiency. This two-step scheme allows for reaching the Cramér-Rao bound in the large sample case.

  3. Incorporate data preprocessing and consistent noise variance estimation using a generalized eigenvalue problem to eliminate bias, ensuring the estimator is asymptotically unbiased and consistent. This module adaptively selects which measurements to utilize based on point or line correspondence counts.

  4. Enable real-time performance by leveraging analytical solutions for the first step (consistent estimate generation) and performing only a single Gauss-Newton iteration in the second step, resulting in a total time complexity of O(n + m). This makes the system suitable for precision-demanding and real-time robot pose estimation.

  5. Enhance robustness against outliers by utilizing bias elimination techniques derived from analyzing the relationship between measurement regressor matrices and noise terms. This ensures that the biases of the proposed bias-eliminated estimators all converge to 0, implying that they are asymptotically unbiased.

Sources

Related papers