A general formula for the amplitude-frequency ratio in shaking induced Mott insulator of atomtronic transistors

arXiv:2403.11355 · cond-mat.quant-gas · Submitted 2024-03-17 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "A general formula for the amplitude-frequency ratio in shaking induced Mott insulator of atomtronic transistors".

Mira: Here's the gist of the paper. Mott insulator of atomic transport can be realized in shaken optical lattices by choosing particular ratio of driving amplitude and frequency, which has been studied as Floquet engineering with time-independent effective Hamiltonian approach The result is owing to the fact that the instantaneous eigenstates approach is applicable in wider parameter range compared to the time-independent effective Hamiltonian approach Analysis from the results of quantum master equation shows that the insulator effect is originated from coherent localization of atom wave packets in optical wells.

Kai: System Description The system considered is a periodically driven double-well open system in optical potentials to represent the shaking atomtronic transistor This system is connected to left and right side atomic reservoirs, where individual atoms pass through the double-well system due to the chemical potential difference between the two reservoirs.

Mira: The model of single bosonic atom occupation results from on-site interaction between atoms because of contact interactions and dipole-dipole interactions.

Kai: Motion of these atoms could be described by the time-dependent Hamiltonian in the laboratory reference frame H(t) = HS (t) + HE + HC.

Paper summary: Kai: So, we're looking at this paper now called "A general formula for the amplitude-frequency ratio in shaking induced Mott insulator of atomtronic transistors". This work by Wenxi Lai and Yu-Quan Ma and Yi-Wen Wei talks about how you can get a Mott insulator effect using shaken optical lattices.

Mira: Basically, the core idea is that by picking a specific ratio between the driving amplitude and the frequency, you can realize this insulator in an atomtronic circuit. It’s studied using Floquet engineering with a time-independent effective Hamiltonian approach, but they use something different called the instantaneous eigenstates approach to find a more general formula for that ratio.

Lev: So, what it claims is that this instantaneous eigenstates approach works in a wider range of parameters than the time-independent effective Hamiltonian approach does. And crucially, analysis from the quantum master equation shows that this insulator effect comes from atoms getting coherently localized in those optical wells.

Kai: That localization idea is key for us. It means we're not just looking at some simple energy level structure; it's about the coherence of the atom wave packets being trapped in these wells. What does this mean for how we design these systems?

Mira: It implies that when you talk about driving amplitude and frequency, you need to follow this general formula they derive, which is Kn plus one over omega n plus one minus Kn over omega n approximately pi > it gives a specific relationship for achieving the driving induced Mott insulator.

Lev: That empirical formula derived from the instantaneous eigenstates approach is what they use numerically to find that ratio. It’s more general than the time-independent effective Hamiltonian approach, which has its own limitations. The paper notes that this numerical result matches the time-independent approach when you're in a high frequency regime, specifically when omega is greater than ten J <ref:2403.11355#pg2>.

Kai: But they admit there are big differences in the low frequency region, where omega is less than ten J <ref:2403.11355#pg2>. And I remember reading something about the time-independent effective Hamiltonian approach diverging when the driving frequency approaches zero. That’s a real red flag for how robust that method is over a broad range of conditions.

Mira: Exactly, and that divergence in the low frequency limit shows why they needed this new approach to get a more applicable formula across different shaking frequencies. The analysis from the quantum master equation confirms that the insulator effect is indeed due to this coherent localization of atom wave packets in the optical wells <ref:2403.11355#pg1>.

Lev: From an engineering standpoint, if we were trying to build this on real hardware, we'd have to worry about realizing those specific driving parameters for every single frequency you want. The paper gives us the relationship between amplitude and frequency that you need to hit to get that coherent localization.

Kai: So, the main point of this work is providing a general formula for tuning the shaking potential to induce a Mott insulator across a wider range of frequencies using this instantaneous eigenstates method. It tells us what ratio of driving amplitude and frequency you need.

Mira: And it connects that tuning directly to the physical mechanism: coherent localization of atom wave packets in optical wells, which is where the insulating behavior actually originates <ref:2403.11355#pg2>.

Lev: For future work, I see a challenge in moving from this theoretical formula to actual experimental realization. We still have the hurdle of constructing those optical traps that can control a few atoms and create the shaking potential we need for this atomtronic transistor setup.

Kai: Right, so the next step is bridging that gap between the math and what's actually buildable in a lab, which I think is where my hardware focus comes in. It moves us from a theoretical possibility to an experimental setup challenge.

Mira: And conceptually, this paper gives us a much more reliable way to predict when we should tune our shaking parameters if we want to observe this specific transition in the double-well open system <ref:2403.11355#pg3>.

Lev: So, for someone listening who isn't deep in the math, the simple picture is that by shaking these optical lattices with a certain amplitude and frequency ratio, you can stop atomic transport and get an insulator. That’s what matters for understanding how this atomtronic transistor could work.

Kai: And it matters because it shows us that this effect is not just some fluke at one frequency; it has a general formula that predicts when it should happen <ref:2403.11355#pg1>.

Mira: It tells us the physics underneath is coherent trapping, which means we can look for those localized wave packets in our experimental measurements to confirm the theory <ref:2403.11355#pg2>.

Lev: So, the implication is that we have a more precise roadmap for tuning these systems, even if building the hardware to test this general formula still requires significant engineering work <ref:2403.11355#pg3>.

Conclusion: Kai: So this paper, "A general formula for the amplitude-frequency ratio in shaking induced Mott insulator of atomtronic transistors," it boils down to finding that specific driving strength and frequency combo that stops atoms from moving and traps them in these wells.

Mira: It’s about taking what we know about those shaking optical lattices—the Floquet engineering stuff—and finding a way to describe the required ratio using something more general than just looking at the energy levels at one fixed frequency.

Lev: From my side, it means they found an approach, called the instantaneous eigenstates method, that works over a much wider range of driving frequencies compared to the traditional time-independent effective Hamiltonian method.

Kai: That’s what I was hoping for. It’s less restrictive on the parameters we need to tune in our actual experiments with trapped atoms.

Mira: And they show that this tuning doesn't just work at one frequency, but it works across a range, both when the driving frequency is below and above some critical energy level, which is pretty broad.

Lev: The main mechanism they point to for why this works is the coherence of the system—how those atom wave packets get stuck in those optical wells instead of just bouncing around.

Kai: So it’s not some simple classical picture of pushing atoms against a wall; it really hinges on them maintaining that coherent state.

Mira: Exactly. The whole point is that we can use this formula to predict the exact shaking parameters needed to create that localization, which is what actually generates the Mott insulator effect in this atomtronic setup.

Lev: It’s a good theoretical roadmap, but from an engineering standpoint, we still have to figure out how precisely we can build those optical traps and control the shaking potential at these specific ratios.

Kai: Right, so they give us the blueprint for what we need to aim for in our physical hardware realization of this atomtronic transistor.

Mira: And understanding that coherent trapping is the driver means we know exactly what kind of localized density fluctuations to look for when we measure the system dynamics.

Beijing Information Science and Technology University

cond-mat.quant-gas

Submitted: 2024-03-17

Updated: 2026-11-11

Comments: 13 pages, 6 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 78/100

The gist: Mott insulator of atomic transport can be realized in shaken optical lattices by choosing particular ratio of driving amplitude and frequency…

Key concepts

Mott Insulator
This state describes a situation where atoms become spatially localized in specific sites within an optical lattice, preventing them from moving freely. It is analogous to how electrons localize in a solid material, but here it's achieved by shaking the atomic traps.
Floquet Engineering
This is a method used to design time-dependent quantum systems by applying periodic driving forces, like shaking an optical lattice. By choosing the right driving amplitude and frequency, researchers can engineer specific behaviors in the system that are not possible with static potentials.
Instantaneous Eigenstates Approach
This mathematical technique is used to analyze how a quantum system evolves when its Hamiltonian changes over time. It involves finding the eigenstates and eigenvalues at each instant of time to describe the dynamics, which is more accurate across a wider range of parameters than simpler methods.

Terminology

Summary

Mott insulator of atomic transport can be realized in shaken optical lattices by choosing particular ratio of driving amplitude and frequency, which has been studied as Floquet engineering with time-independent effective Hamiltonian approach The result is owing to the fact that the instantaneous eigenstates approach is applicable in wider parameter range compared to the time-independent effective Hamiltonian approach Analysis from the results of quantum master equation shows that the insulator effect is originated from coherent localization of atom wave packets in optical wells. p. 0

Where the paper says it

The result is owing to the fact that the instantaneous eigenstates approach is applicable in wider parameter range compared with the time-independent effective Hamiltonian approach. Analysis from the results of quantum master equation shows that the insulator effect is originated from coherent localization of atom wave packets in optical wells.

System Description

The system considered is a periodically driven double-well open system in optical potentials to represent the shaking atomtronic transistor This system is connected to left and right side atomic reservoirs, where individual atoms pass through the double-well system due to the chemical potential difference between the two reservoirs. The model of single bosonic atom occupation results from on-site interaction between atoms because of contact interactions and dipole-dipole interactions. p. 1

Where the paper says it

Energy levels in the double-well represent conduction band of atomtronic circuit [1, 2], in which interactions between bosonic atoms are supposed to be strong enough that the maximum occupation of each level is limited to be a single atom [58–61]. The model of single bosonic atom occupation results from on-site interaction between atoms because of contact interactions and dipole-dipole interactions [7, 62– 64].

Motion of these atoms could be described by the time-dependent Hamiltonian in the laboratory reference frame H(t) = HS (t) + HE + HC. p. 1
Where the paper says it

Atoms in the system are supposed to be suffered from shaking of optical potential. Motion of these atoms could be described by the time-dependent Hamiltonian in the laboratory reference frame H(t) = HS (t) + HE + HC , (1) in which the system Hamiltonian is a time-dependent operator written by (~ = 1) HS (t) = X 2 l=1 (εl + ωl(t))nl − J(a † 1 a2 + a † 2 a1), (2) where al and nl = a † l al are annihilation and number operators of atoms, respectively, at lattice site l (l = 1, 2).

Methodology and Approach

The instantaneous eigenstates approach is a method to describe dynamics of a quantum system with time dependent Hamiltonian. This approach involves deriving the equation of motion directly using the time-dependent Hamiltonian and then solving it by considering time dependent eigenstates and eigenvalues. p. 2

Where the paper says it

On one side, equation of motion of the system should be derived directly using time dependent Hamiltonian. On the other side, to solve results of the equation of motion, time dependent eigenstates and eigenvalues would be considered.

The total density matrix ρtot(t) is governed by a time-dependent Floquet Hamiltonian H(t). p. 2
Where the paper says it

(5) is transformed into the oscillating frame ∂ ∂tρtot(t) = −i[H(t), ρtot(t)]. (6) It can be readily seen that the total density matrix ρtot(t) = U † (t)̺tot(t)U(t) is governed by a time-dependent Floquet Hamiltonian H(t) = U † (t)H(t)U(t) − iU† (t) ∂ ∂tU(t) (7) which has the following detail expression, H(t) = X 2 l=1 εlnl − J(e iφ(t) a † 1 a2 + H.

This is transformed into the interaction picture form, leading to an equation that can be integrated over time to reach a second order extension with respect to the system-environment coupling. p. 2
Where the paper says it

(9) gives rise to the second order extension with respect to the system-environment coupling, ∂ ∂tρˆtot(t) = −i[Hˆ J (t), ρˆtot(t)] − i[HˆC (t), ρˆtot(0)] − Z t 0 dt′ [HˆC(t), [Hˆ J (t ′ ), ρˆtot(t ′ )]] − Z t 0 dt′ [HˆC (t), [HˆC (t ′ ), ρˆtot(t ′ )]]. (11) Since, the state ρE of the environment (the two atomic baths) is considered as equilibrium thermal state in all the time, it is reasonable to write total density matrix of the system and environment as direct product ρtot(t) = ρ(t)ρE

Key Findings on Insulator Generation

The paper demonstrates that coherent trapping induced Mott insulator at arbitrary shaking frequency, both in ω ≤ E and ω > E, is achieved. The most significant result is the empirical formula Kn+1/ωn+1 − Kn/ωn ≈ π of driving amplitude and frequency for the generation of driving induced Mott insulator. p. 0

Where the paper says it

A general formula for the amplitude-frequency ratio in shaking induced Mott insulator of atomtronic transistors Wenxi Lai,∗ Yu-Quan Ma, and Yi-Wen Wei School of Applied Science, Beijing Information Science and Technology University, Beijing, 100192, China Abstract: Mott insulator of atomic transport can be realized in shaken optical lattices by choosing particular ratio of driving amplitude and frequency, which has been studied as Floquet engineering with time-independent effective Hamiltonian approach. Here, we give a general formula of amplitude-frequency ratio for realization of the shaking induced insulator-conductor transition in a double-well open system, using numerical computation with instantaneous eigenstates approach.

This formula is achieved from numerical results using the instantaneous eigenstates approach which is a more general method compared to the time-independent effective Hamiltonian approach. p. 0
Where the paper says it

Here, we give a general formula of amplitude-frequency ratio for realization of the shaking induced insulator-conductor transition in a double-well open system, using numerical computation with instantaneous eigenstates approach. The result is owing to the fact that the instantaneous eigenstates approach is applicable in wider parameter range compared with the time-independent effective Hamiltonian approach.

The insulator effect is originated from coherence of the system, as shown when hRe[ρ0110]i 6= 0 and hIm[ρ0110]i = 0. p. 5
Where the paper says it

, and so on. The insulator occurs when the averaged real part of the off-diagonal density matrix element satisfies hRe[ρ0110]i 6= 0 and the imaginary part satisfies hIm[ρ0110]i = 0 as plotted in Fig.

Comparison with Effective Hamiltonian Approach

Calculations from the time-independent effective Hamiltonian approach match the results of the instantaneous eigenstates approach in the regime of high frequency, where ω > 10J. In the low frequency region ω < 10J, differences between the two methods become very large. p. 9

Where the paper says it

6 shows that calculations from the time-independent effective Hamiltonian approach match the results of the instantaneous eigenstates approach in the regime of high frequency, where ω > 10J. In the low frequency region ω < 10J, difference between the two methods becomes very large.

The time-independent effective Hamiltonian approach depends on the number of terms in expansions given in Eq. p. 9
Where the paper says it

In the low frequency region ω < 10J, difference between the two methods becomes very large. Obviously, the time-independent effective Hamiltonian approach depends on number of terms in expansions given in Eq.

(28) or Eq.(34). However, for much low driving frequency, ω → 0, the time-independent effective Hamiltonian approach displays divergence. p. 9
Where the paper says it

From the point of view of insulator areas, time-independent effective Hamiltonian approach is applicable for both ω > J and ω < J regimes as illustrated in Fig. However, for much low driving frequency, ω → 0, the time-independent effective Hamiltonian approach displays divergence.

Feasibility and Realization

Challenges for realization mainly originate from the construction of optical traps controlling a few atoms, to create shaking potential, and to monitor atoms. Fortunately, transport and trapping of atoms at the level of single atom could be manipulated using optical tweezers as reported recently. p. 9

Where the paper says it

Discussions on feasibility Challenges for realization of the configuration considered here are mainly originated from the construction of optical traps controlling a few atoms, to create shaking potential, and to monitor atoms. Fortunately, transport and trapping of atoms at the level of single atom could be manipulated using optical tweezers as reported recently [60, 61].

Open systems of ultracold atoms have been implemented in experiments for atomtronic technology. p. 9
Where the paper says it

Fortunately, transport and trapping of atoms at the level of single atom could be manipulated using optical tweezers as reported recently [60, 61]. Open systems of ultracold atoms have been implemented in experiments for atomtronic technology [4, 59, 77, 78].

Atomic current could be measured by detecting atom population with single atom fluorescence counts in a particular well or detecting atom velocity with optical method such as Raman process. p. 9
Where the paper says it

In optical lattices, periodically vibrating potential could be produced by laser fields reflecting on a mirror which is connected to a piezo-electric actuator [12]. Atomic current could be measured by detecting atom population with single atom fluorescence counts in a particular well [81] or detecting atom velocity with optical method such as Raman process [82].

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can accurately predict Mott insulator conditions in atomtronic transistors by using the empirical formula Kn+1/ωn+1 − Kn/ωn ≈ π for driving amplitude and frequency ratios derived from numerical results.

  2. The improved system can determine if a given driving frequency and amplitude configuration will lead to coherent localization of atom wave packets, which is the origin of the shaking induced Mott insulator effect.

  3. The AI can compare the performance of different theoretical approaches, specifically showing that in the high frequency regime (ω > 10J), results from both the instantaneous eigenstates approach and time-independent effective Hamiltonian approach match when sufficient expansion terms are considered.

  4. The system can identify precise conditions for insulator points by analyzing the zero order Bessel function J0(x) = 0, where x is the ratio Kn/ωn, leading to a common condition for realization of the coherence induced insulator in both ω ≤ J and ω > J regimes.

Abstract

Mott insulator of atomic transport can be realized in shaken optical lattices by choosing particular ratio of driving amplitude and frequency, which has been studied as Floquet engineering with time-independent effective Hamiltonian approach. Here, we give a general formula of amplitude-frequency ratio for realization of the shaking induced insulator-conductor transition in a double-well open system, using numerical computation with instantaneous eigenstates approach. The result is owing to the fact that the instantaneous eigenstates approach is applicable in wider parameter range compared with the time-independent effective Hamiltonian approach. Analysis from the results of quantum master equation shows that the insulator effect is originated from coherent localization of atom wave packets in optical wells.

Related papers