A Multi-Modal Approach Based on Large Vision Model for Close-Range Underwater Target Localization
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: We're looking at the paper: "A Multi-Modal Approach Based on Large Vision Model for Close-Range Underwater Target Localization".
Dev: Here's the gist of the paper. Underwater target localization uses real-time sensory measurements to estimate the position of underwater objects of interest, providing critical feedback information for underwater robots in tasks such as obstacle avoidance, scientific exploration, and environmental monitoring <ref:2401.04595#pg2> This paper proposes a novel multi-modal sensing framework that fuses real-time acoustic and optical sensory measurements utilizing a large vision model to achieve a general sensing capability of close-range underwater target localization <ref:2401.04595#pg3> The proposed method integrates a large vision model with unique acoustic-based model prompt design to process multimodal sensor measurements, ensuring the generalizability and robustness of underwater target localization <ref:2401.04595#pg4>.
Rosa: Problem Statement Acoustic sensing is acknowledged as the most commonly used approach for long-range sensing tasks but suffers from low resolution, high cost, and high energy consumption when applied to close-range underwater target localization <ref:2401.04595#pg2> Optical sensing offers advantages of high resolution and low cost for close-range tasks but existing studies are restricted to specific targets and ignore illumination conditions <ref:2401.04595#pg3>.
Dev: The paper addresses these issues by proposing a method that assimilates both optical and acoustic sensory measurements to estimate the 3D positions of close-range underwater targets <ref:2401.04595#pg2>.
Rosa: System Design and Components The proposed sensing module consists of a binocular camera and several ultrasonic ranging sensors <ref:2401.04595#pg3>.
Title and authors: Rosa: The authors are Mingyang Yang, Zeyu Sha, and Feitian Zhang, and their title points out that they’re using a large vision model to fuse acoustic and optical measurements for finding underwater targets up close.
Dev: It sounds like they're trying to solve the problem of needing both modalities because one isn't good enough on its own for this specific task.
Taro: That fusion idea is what catches my eye, especially when you think about how different sensors see the world differently underwater.
The paper's summary: Rosa: Basically, they propose a new framework that uses a large vision model combined with acoustic measurement prompts to handle both optical and acoustic data together for localization.
Dev: They’re integrating the large vision model with this unique acoustic prompt design specifically to make sure the localization is both general and robust across different conditions.
Taro: It’s like they're trying to teach the AI how to use sound information in a way that works even when it doesn't have perfect visual data or when things get dark.
The paper's improvements: Rosa: One of the main improvements they highlight is that this method can achieve close-range localization without needing any prior training data for the large vision model to work well.
Dev: That lack of required training data is significant because it means the system has better generalization capability across various underwater targets.
Taro: I also see them focusing a lot on how illumination conditions affect things, showing that segmentation failure rates increase as the light gets dimmer for both regular and sea animal shaped targets.
Conclusion: Rosa: So, to wrap up, the main point of "A Multi-Modal Approach Based on Large Vision Model for Close-Range Underwater Target Localization" is that fusing optical and acoustic data with a large vision model gives better estimation performance and lower variance than using just one sensor.
Dev: They showed high accuracy in 1D ranging at ninety-six point one seven percent when using the acoustic prompts, which they claim are consistently more accurate regardless of the illumination condition <ref:2401.04595#pg1>.
Taro: And they also managed to bound their position and velocity motion state estimation error by two point eight times ten to the minus three meters and one point five times ten to the minus three meters per second in their experiments.
Rosa: That’s a solid result, showing that this multi-modal sensing framework resolves some challenging problems in close-range underwater target sensing by integrating large vision models with acoustic measurements for robust localization.
Dev: Yeah, it provides a comprehensive solution by combining these different inputs to get better results than either modality could achieve alone.
Mingyang Yang, Zeyu Sha, Feitian Zhang
Peking University
cs.RO
Submitted: 2024-01-09
Updated: 2024-09-09
Journal ref: IEEE/ASME Transactions on Mechatronics ( Volume: 30, Issue: 4, August 2025)
DOI: 10.1109/TMECH.2024.3449090
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 85/100
The gist: Underwater target localization uses real-time sensory measurements to estimate the position of underwater objects of interest…
Key concepts
- Multi-Modal Sensing Framework
- This framework combines two different types of sensors—acoustic signals from ultrasonic sensors and optical data from a camera. By fusing these distinct data streams using a large vision model, the system gains comprehensive sensing capabilities that neither sensor could provide independently, leading to more reliable target localization.
- Large Vision Model (SAM)
- A large vision model is used for instance segmentation, which helps the system identify and isolate targets in underwater images. A key advantage of this model is its superior generalization ability, meaning it can perform accurate segmentation on various targets without needing specific training data for each new object.
- Acoustic-Based Model Prompt Design
- This unique design uses acoustic measurements to create prompts that guide the large vision model's processing. This integration ensures that the visual recognition process is informed by precise acoustic information, enhancing the robustness and accuracy of the localization results across different environments.
- Extended Kalman Filter (EKF)
- The EKF is an algorithm used for estimating dynamic states, such as target position and velocity over time. In this system, it combines measurements from both optical data (2-D disparity) and acoustic ranging distances to create a more accurate estimate of the target's motion in 3D space.
Terminology
Summary
Underwater target localization uses real-time sensory measurements to estimate the position of underwater objects of interest, providing critical feedback information for underwater robots in tasks such as obstacle avoidance, scientific exploration, and environmental monitoring <ref:2401. p. 004595#pg2> This paper proposes a novel multi-modal sensing framework that fuses real-time acoustic and optical sensory measurements utilizing a large vision model to achieve a general sensing capability of close-range underwater target localization <ref:2401. p. 104595#pg3> The proposed method integrates a large vision model with unique acoustic-based model prompt design to process multimodal sensor measurements, ensuring the generalizability and robustness of underwater target localization <ref:2401. p. 004595#pg4>.
Problem Statement
Acoustic sensing is acknowledged as the most commonly used approach for long-range sensing tasks but suffers from low resolution, high cost, and high energy consumption when applied to close-range underwater target localization <ref:2401.04595#pg2> Optical sensing offers advantages of high resolution and low cost for close-range tasks but existing studies are restricted to specific targets and ignore illumination conditions <ref:2401. p. 004595#pg3>. The paper addresses these issues by proposing a method that assimilates both optical and acoustic sensory measurements to estimate the 3D positions of close-range underwater targets <ref:2401. p. 004595#pg2>.
System Design and Components
The proposed sensing module consists of a binocular camera and several ultrasonic ranging sensors <ref:2401.04595#pg3>. The system is designed with a 3D-printed square-shaped support frame, a binocular camera, and eight acoustic ranging sensors located at the four corners and the four midpoints of the edges <ref:2401. p. 104595#pg3>. The test platform includes tunable LED tubes to control illumination conditions and a HOBO MX2202 light intensity sensor to measure experimental illumination <ref:2401. p. 204595#pg4>.
Localization Algorithm Flow
The proposed multi-modal target localization algorithm takes the video stream from the binocular camera and the ranging data stream from the acoustic sensors as inputs to calculate the positions and velocities of the targets of interest in real time <ref:2401.04595#pg5>. The process involves several steps, including rectification using intrinsic parameters, instance segmentation by SAM using point prompts per Section IV-A, and subsequent fusion techniques like weighted averaging or the extended Kalman filter (EKF) for target ranging and motion state estimation <ref:2401. p. 304595#pg5>.
Experimental Validation
Extensive experiments were conducted to validate the effectiveness of the proposed method, including testing under various illumination conditions <ref:2401.04595#pg4>. The performance was evaluated across three main tasks: 1) static target localization, 2) timevarying distance estimation for dynamic targets using a weighted averaging filter, and 3) 3-D motion state estimation using EKF <ref:2401. p. 904595#pg8>. Results showed that the fused optical and acoustic measurements provide enhanced estimation performance with higher accuracy and lower variance compared to using either sensing modality alone <ref:2401. p. 804595#pg9>. The influence of illumination conditions was quantitatively evaluated, showing increased segmentation failure rates as illumination intensity decreased <ref:2401. p. 604595#pg9>.
Key Contributions
The contributions of the paper are twofold, first proposing a novel multi-modal sensing method that incorporates a large vision model (SAM) to assimilate acoustic and optical sensory measurements for close-range underwater target localization <ref:2401.04595#pg10>. Second, the paper takes the illumination variance into consideration and conducts extensive experiments to quantitatively investigate and evaluate the influence of illumination conditions on the performance of the designed target localization algorithm <ref:2401. p. 104595#pg10>. The method is expected to achieve an enhanced robust sensing performance with respect to various underwater targets with no training data required due to the superior generalization capability of SAM <ref:2401. p. 104595#pg4>. The comparison between the pure image-based one-shot method and the proposed acoustic-based prompt-localization method demonstrates that our proposed acoustic-based prompt-localization method consistently provides more accurate and reliable input prompts regardless of the illumination condition <ref:2401. p. 704595#pg9>. The accuracy of the prompt localization without any filtering method is 96. p. 717% and 96.50% under 25 lux and 12 lux, respectively <ref:2401. p. 604595#pg9>. The estimation error for position and velocity motion states are bounded by 2. p. 88×10−3m and 1.5×10−3 m/s in the experiments <ref:2401. p. 004595#pg8>. The incorporation of multi-modal sensor measurements aligns with the design expectations and generally improves the estimation accuracy, reducing the averaged estimation error by 10% to 25% <ref:2401. p. 904595#pg8>.
Future Work
For future work, researchers plan to explore the feasibility of replacing SAM with semantic and lightweight large vision models in image segmentation to improve real-time performance <ref:2401.04595#pg10>. Additionally, the team intends to install the multi-modal sensing module onto a lab-developed underwater robot and explore the application of the proposed estimation algorithm in closed-loop motion control of underwater robots <ref:2401. p. 904595#pg10>. The paper concludes by providing important insights into the multi-modal sensing design in underwater environments <ref:2401. p. 904595#pg4>. The results validate the effectiveness of the proposed multi-modal sensing framework in 1-D ranging and 3-D motion state estimation for both static and dynamic underwater targets <ref:2401. p. 904595#pg8>. The paper presents extensive experimental results confirming the robustness of the proposed estimation algorithm with respect to illumination conditions <ref:2401. p. 104595#pg9>. The authors conclude that they have resolved several challenging problems in close-range underwater target sensing <ref:2401. p. 104595#pg2>. The paper provides a comprehensive solution by integrating large vision models with acoustic measurements for robust localization <ref:2401. p. 104595#pg4>.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Large vision model integration for generalization allows for target localization
with no training data required,
enabling robust sensing performance across various underwater targets. -
The proposed multi-modal sensing framework can estimate 3D positions and velocities of close-range underwater targets in real time by assimilating acoustic and optical sensory measurements using a large vision model and unique acoustic-based model prompt design.
-
The system can perform target ranging with the weighted averaging filter, balancing
the measurement from optical sensor and from acoustic sensors
using a factor alpha calculated based on estimation errors to determine optimal sensor weighting. -
The system can estimate target motion states using an extended Kalman filter (EKF) by establishing a dynamic system state equation and observation equation that incorporates both 2-D coordinate disparity and ranging distance measurements.
-
The AI system can dynamically adjust the fusion weight alpha based on the averaged estimation percentage error of both sensor modalities to optimize the accuracy of distance estimation, as defined by Eq. (8).
-
The target localization algorithm can perform frame segmentation by checking if
the epipolar matching condition (EMC) is satisfied for all five key point pairs,
ensuring successful matching between left and right view images. -
The system can provide quantitative evaluation of the influence of illumination conditions on performance, specifically demonstrating that
segmentation failure rates increase significantly
as illumination intensity decreases for both regular-shaped and sea animal figure-shaped targets. -
The target localization method can achieve high accuracy in 1-D ranging (96.17% to 96.50%) when using acoustic prompts, which is shown to be
consistently more accurate and reliable input prompts regardless of the illumination condition.
Sources
Related papers
- Rethinking Actions: Continuity-Aware Priors for World-Model Planning
- MOSAIC: Modular Obstacle and Spatial-Aware Framework for Manipulation In Cluttered Scenes
- SAGAS: Semantic-Aware Graph-Assisted Stitching for Offline Temporal Logic Planning
- DexSeed: Expanding Human Hand-Object Interactions into Robot Demonstrations for Dexterous Policy Learning
- LaST0.5: A Generalist World Action Model with Interaction-Centric Latent Reasoning
- CIALLO: Learning Shared Intent Representations for Cross-Embodiment Manipulation