Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF 4
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF 4".
Mira: Here's the gist of the paper. Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF4 determines that applying the magnetic field along the tetragonal axis of the crystal makes LiGdF4 magnetized in a wide temperature range similar to a system of non-interacting magnetic moments, thus enhancing the MCE to a maximum possible level of an ideal paramagnet Magnetocaloric Effect Findings The study reports that the magnetocaloric effect (MCE) in LiGdF4 is highly anisotropic, with cooling efficiency being up to twice higher at H k c.
Kai: The results are interpreted within a conventional molecular field approach considering the considerable anisotropy of the paramagnetic Curie-Weiss temperature.
Mira: This anisotropy arises from the fine compensation of contributions from exchange coupling, long-range dipolar interaction, and single-ion anisotropy to the magnetic susceptibility, making the Curie-Weiss temperature strongly anisotropic and very close to zero for one principal direction of the external field.
Kai: Experimental Setup and Data Acquisition The crystal structure of LiGdF4 is Scheelite-type with the space group I41/a (C6h) and local symmetry S4 on each Gd-site.
Paper summary: Kai: So we're looking at this paper titled "Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF4." Basically, they report that when you apply the magnetic field along the tetragonal axis of this crystal, LiGdF4 gets magnetized across a wide temperature range.
Mira: That's interesting because they claim this makes it behave pretty much like a system of non-interacting magnetic moments, which in turn enhances the magnetocaloric effect up to a level similar to an ideal paramagnet.
Lev: From my side, I need to ask about what that means for real hardware; does that wide temperature range actually translate into usable cooling performance when we consider the overhead of actual field sweeps?
Kai: Well, the paper notes they measured the magnetization in this material using a Quantum Design PPMS Vibrating Sample Magnetometer, applying fields along both principal axes, c and a. They looked at temperatures from two Kelvin up to ten Kelvin with cooling and heating data that showed no difference.
Mira: The core finding they highlight is how highly anisotropic the magnetocaloric effect is; they say the cooling efficiency can be up to twice higher when you apply the field along H k c.
Lev: Twice higher is a big number, but we need to know if that efficiency gain holds up when we talk about practical applications at liquid helium four temperature range under moderate applied fields.
Kai: They interpret these results using a conventional molecular field approach, taking into account the anisotropy of the paramagnetic Curie Weiss temperature, which they found is very close to zero for one principal direction of the external field.
Mira: That anisotropy comes from a fine compensation between three things: exchange coupling, long-range dipolar interaction, and single ion anisotropy affecting the magnetic susceptibility.
Lev: So what's important here is that this anisotropy arises from these competing interactions, which suggests that simple models might not capture the full complexity of the magnetic state in LiGdF4.
Kai: The experimental setup involves a Scheelite-type crystal structure with space group I41/a, and they used parameters like a equals five point two one nine and c equals ten point nine seven Angstroms for the tetragonal unit cell <ref:2307.06111#pg2>.
Mira: They also mention that a single-crystal sample is up to thirty percent more efficient at demagnetization than what they previously observed for a powder material, which is pretty significant.
Lev: Thirty percent efficiency gain in the demagnetization process sounds promising when we think about how much power we might get out of it under moderate applied fields.
Kai: They found that the ratio of entropy changes delta S c over delta S a can reach a factor of two at two Kelvin when starting with an initial magnetic field mu zero H i equal to one Tesla <ref:2307.06111#pg3>.
Mira: And they suggest the most efficient demagnetization process could be achieved under moderate applied fields, with the highest cooling efficiency observed for a starting magnetic field mu zero H i of approximately two Tesla in the temperature range of three Kelvin to four Kelvin.
Lev: So if we are trying to design a system that runs reliably, focusing on those specific field strengths and temperatures makes sense for our current hardware constraints.
Kai: They also provide some comparison data in Table one, which shows potential magnetocaloric cooling capacities for different compounds. For LiGdF4 along H k c, they report an entropy change of one point three four kilo-joules per magnetic ion when the initial field is one Tesla <ref:2307.06111#pg3>.
Mira: The paper concludes by saying that the data suggests the system is magnetized along the c axis in a wide temperature range similar to non-interacting magnetic ions, which enhances the magnetocaloric effect to a maximum possible level of an ideal paramagnet <ref:2307.06111#pg3>.
Lev: So, what this means for us in terms of practical magnetic refrigeration is that we might be able to achieve cooling power up to about ten milliWatts per cubic centimeter for a reasonable field sweep rate if we operate in that specific field strength window.
Kai: Ultimately, the work demonstrates that the magnetocaloric effect in LiGdF4 is considerably anisotropic, resulting from competing contributions from various magnetic interactions to the paramagnetic susceptibility of the system <ref:2307.06111#pg2>.
Mira: That anisotropy is really driven by those competing interactions we discussed earlier, and it points toward a very specific magnetic configuration in this material.
Lev: It’s good that they compared this single-crystal result against other materials, like two well known rare-earth gallium garnets and K barium yttrium borate <ref:2307.06111#pg3>.
Kai: So to wrap up on "Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF4," the main point is that the MCE in this material is considerably anisotropic, resulting from competing contributions from various magnetic interactions to the paramagnetic susceptibility of the system.
Mira: That anisotropy is driven by those competing interactions we discussed earlier, and it points toward a very specific magnetic configuration in this material.
Lev: It’s good that they compared this single-crystal result against other materials, like two well known rare-earth gallium garnets and K barium yttrium borate <ref:2307.06111#pg3>.
Conclusion: Kai: So we're looking at this paper titled "Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF4." It’s about how the way you apply a magnetic field really matters for cooling power in this specific crystal.
Mira: Right, it’s focusing on that anisotropy. The authors are pointing out that the magnetic response isn't uniform across all directions.
Lev: From where I sit, I’m thinking about the complexity of those interactions. It seems they found a way to get a very strong effect in one direction by tuning the field there.
Kai: Exactly, because they found that applying the field along the tetragonal axis makes it behave almost like non-interacting magnetic moments across a wide temperature range. That's what's really interesting for me as someone who deals with how systems behave under different constraints.
Mira: And that behaves like an ideal paramagnet is a big claim, because they are using a molecular field approach to explain it. They are suggesting the underlying physics is simpler than we might assume, provided you look at it from the right angle.
Lev: But I gotta ask, does that simple model hold up when we try to build something real? If the system is so anisotropic, how robust is that cooling power when you try to use it in a practical refrigerator setup?
Kai: Well, they show that this single-crystal material has an advantage over powder. The demagnetization process itself is up to thirty percent more efficient. That’s a concrete number we can work with.
Mira: And the comparison they made against other materials, like those rare-earth gallium garnets, really hammers home how unique this LiGdF4 is in terms of its magnetic properties for this effect.
Lev: It does sound promising if those efficiency gains translate to usable cooling power at liquid helium four temperatures under moderate applied fields. That’s the next big hurdle we need to address.
Kazan Federal University · Zavoisky Physical-Technical Institute · Kapitza Institute for physical problems RAS · HSE University
cond-mat.str-el, cond-mat.mtrl-sci
Submitted: 2023-07-12
Updated: 2023-07-22
Comments: 4 pages, 3 figures
Journal ref: J. Magn. Magn. Mater. 589, 171600 (2024)
DOI: 10.1016/j.jmmm.2023.171600
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 79/100
The gist: Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF4 determines that applying the magnetic field along the tetragonal axis of the crystal makes LiGdF4 magnetized in a wide…
Key concepts
- Magnetocaloric Effect (MCE)
- The MCE describes how a material's temperature changes when it is subjected to a changing magnetic field. In this paper, researchers measured how much heat is absorbed or released by LiGdF4 as the external magnetic field was applied or removed.
- Anisotropy
- Anisotropy means that a material's properties depend on the direction in which they are measured. For LiGdF4, this property is very strong, meaning its magnetic response and cooling ability change significantly depending on whether the magnetic field is applied along the 'c' axis or another direction.
- Molecular Field Approach
- This theoretical model treats a single magnetic ion as if it were influenced by an average magnetic field created by all the other ions in the material. This helps explain how complex interactions, like exchange coupling and dipolar forces, affect the overall magnetic behavior of LiGdF4.
Terminology
Summary
Strongly anisotropic magnetocaloric effect in a dipolar magnet LiGdF4 determines that applying the magnetic field along the tetragonal axis of the crystal makes LiGdF4 magnetized in a wide temperature range similar to a system of non-interacting magnetic moments, thus enhancing the MCE to a maximum possible level of an ideal paramagnet
Magnetocaloric Effect Findings
The study reports that the magnetocaloric effect (MCE) in LiGdF4 is highly anisotropic, with cooling efficiency being up to twice higher at H k c. The results are interpreted within a conventional molecular field approach considering the considerable anisotropy of the paramagnetic Curie-Weiss temperature. p. 0 This anisotropy arises from the fine compensation of contributions from exchange coupling, long-range dipolar interaction, and single-ion anisotropy to the magnetic susceptibility, making the Curie-Weiss temperature strongly anisotropic and very close to zero for one principal direction of the external field. p. 0
Experimental Setup and Data Acquisition
The crystal structure of LiGdF4 is Scheelite-type with the space group I41/a (C6h) and local symmetry S4 on each Gd-site. Magnetization measurements were conducted using the Quantum Design PPMS Vibrating Sample Magnetometer, where a magnetic field H was applied along the two principal crystal axes, c and a, within the sample plane to exclude demagnetization corrections. p. 1 The temperature varied from 2 to 10 K with cooling and heating data being indistinguishable. p. 1
Theoretical Modeling and Interpretation
The experimental results can be interpreted in terms of a system of interacting magnetic moments in a disordered state, where the interaction is introduced as an effective molecular field acting on a single moment from the rest of the ensemble. The magnetization can be self-consistently expressed in the form of a Brillouin function with external and molecular fields. p. 2 Theoretical curves computed for an ideal paramagnet perfectly reproduce the data for H k c across the entire temperature range of 2–10 K. p. 2
Comparison and Practical Implications
The single-crystal LiGdF4 demagnetized at H k c shows a significant advantage over powder material, making the demagnetization process up to 30% more efficient. The ratio of entropy changes ∆Sc/∆Sa can reach a factor of 2 at T = 2 K for the starting field µ0Hi = 1 T. p. 3 The most efficient demagnetization process in LiGdF4 could be achieved under moderate applied fields, with the highest cooling efficiency observed for a starting magnetic field µ0Hi ≃ 2 T in the temperature range 3–4 K. p. 3 This enables cooling power up to ≃ 10 mW/cm3 for a reasonable field sweep rate. p. 3
Conclusion and Future Prospects
The work demonstrates that the MCE in LiGdF4 is considerably anisotropic, resulting from competing contributions from various magnetic interactions. The comparison with other well-known materials shows a significant advantage of a single crystal LiGdF4 for demagnetization at liquid helium-4 temperatures in moderate applied fields. p. 3 This opens new opportunities for practical applications in magnetic refrigeration. p. 3 The data suggests that the system is magnetized along c-axis in a wide temperature range similar to non-interacting magnetic ions, which enhances the MCE to a maximum possible level of an ideal paramagnet. p. 3 The results may open new possibilities to enhance the efficiency of magnetic refrigeration in the liquid helium-4 temperature range. p. 0 The findings are compared to earlier studies of MCE in powder samples and analogous data for other well known magnetocaloric materials. p. 0 The comparison with two well known rare-earth gallium garnets is obviously greatly in favor of a single-crystal LiGdF4 demagnetized at H k c. p. 3 The advantage of LiGdF4 is especially pronounced if one takes into account the enhanced density of magnetic ions in this material which is important from the practical point of view. p. 3 p. 3 The results can be described in the frame of a usual molecular field approach taking into account considerable anisotropy of the paramagnetic Curie-Weiss temperature. p. 3 The comparison both with two well known rare-earth gallium garnets and with KBaYb(BO3)2 is obviously greatly in favor of a single-crystal LiGdF4 demagnetized at H k c. p. 3 The advantage of LiGdF4 is especially pronounced if one takes into account the enhanced density of magnetic ions in this material which is important from the practical point of view. The most efficient demagnetization process in LiGdF4 could be achieved under moderate applied fields. p. 3
Table I Comparison
Table I compares potential magnetocaloric cooling capacities for different compounds, with entropy changes expressed in kB per magnetic ion on demagnetization from the initial field µ0Hi = 1 and 2 T to zero at constant temperature T = 2 K. LiGdF4 H k c shows an entropy change of 1. p. 334 kB per magnetic ion for the initial field µ0Hi = 1 T and 0. p. 263(2) kB for µ0Hi = 2 T. p. 1
References Cited
[1] P. Debye, Ann. p. 3 Phys. 81, 1154 (1926)
[2] N. Kurti, F. N. Robinson, F. p. 3 Simon, D. A. Spohr, Nature 178, 450 (1956)
[3] O. V. Lounasmaa, Experimental Principles and Methods, (Academic’s Press, London and New York, 1974)
[4] J. S. Gardner, M. p. 3 J. P. Gingras, J. p. 3 E. Greedan, Rev. p. 3 Mod. Phys. 82, 53 (2010)
[5] M. E. Zhitomirsky, Phys Rev B 67, 104421 (2307)
[6] T. Numazawa, K. p. 0 p. 0 Kamiya, T. Okano, K. Matsumoto, Physica B 329-333, 1656 (2003)
[7] D. A. P. Brasiliano, J. p. 3-M. Duval, C. Marin, E. Bichaud, J. p. 3-P. Brison, M. Zhitomirsky, N Luchier, Cryogenics 105 (2307)
[8] S. S. Sosin, L. A Prozorova, A I Smirnov, A I Golov, I B Berkutov, O A Petrenko, G Balakrishnan and M E Zhitomirsky Phys Rev B 71 (2307)
[9] B. Wolf, U Tutsch, S Dorschug, C Krellner, F Ritter, W Assmus, M Lang J Appl Phys 120 (2307)
[10] T. Numazawa, K. Kamiya, P Shirron, M DiPirro and K Matsumoto AIP Conf Proc 850 (2307)
[14] C Keller and H Scmutz J Inorg Nucl Chem 27 (1965)
[15] M B Sanders, F A Cevallos, R J Cava Mater Res Express 4 (2307)
[16] Y Tokiwa, S Bachus, K Kavita A Jesche A Tsirlin P Gegenwart Commun Mater 2 (2307)
[17] J Samuel Smart Effective Field Theories in Magnetism (W B Saunders Company, Philadelphia London 1966)
Final Summary Sentence
The single most informative sentence about the paper's subject and finding is: The MCE in LiGdF4 is considerably anisotropic, resulting from competing contributions from various magnetic interactions to the paramagnetic susceptibility of the system.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved prediction of magnetocaloric effect efficiency in single crystals by incorporating anisotropic molecular field approaches for LiGdF4. The improved AI system can accurately predict that
the cooling efficiency being up to twice higher at H k c
based on the magnetic field direction applied relative to the tetragonal c-axis. -
Enhanced modeling of competing magnetic interactions in frustrated systems using a molecular field approach with anisotropic Curie-Weiss temperatures. This allows the system to model how
the fine compensation of contributions from exchange coupling, long-range dipolar interaction and single-ion anisotropy
leads to directional dependence in magnetic susceptibility. -
Optimized selection criteria for promising magnetic refrigerants by comparing single crystal data against powder averages using quantitative agreement metrics. The improved AI system can determine that the comparison
averaging our results by orientations in the powder as DeltaSp = 1/3DeltaSc + 2/3DeltaSa one achieves perfect quantitative agreement with the previous data.
-
Increased capability for calculating practical cooling power density for magnetic refrigeration at liquid helium-4 temperatures. The improved AI system can calculate that
the cooling capacity of LiGdF4 reaches the value approximately 0.25 J/T per cm3 of the material which enables the cooling power up to approximately 10 mW/cm3 for a reasonable field sweep rate 2T/min.
Related papers
- Coupled Magnetic and Lattice Excitations in Multiferroic Ba3HoRu2O9: Insights from Neutron Scattering, Raman Spectroscopy, and Machine-Learned Phonon Calculations
- Gossamer Superconductivity in Moir'e WSe 2 Bilayer
- Spin-density wave of ferrimagnetic building blocks masking the ferromagnetic quantum-critical point in NbFe2
- Raman Circular Dichroism and spinon Quantum Geometry of Chiral Quantum Spin Liquids
- Twin Algebras: Condensable Algebras beyond Anyons
- Spin supersolid in triangular lattice easy-axis spin-1/2 antiferromagnet: a fermionic parton perspective