FPGA-based LQG controller and hardware-in-the-loop simulator implementation for nanomechanical systems

summary

The gist

FPGA-based LQG controller and hardware-in-the-loop simulator implementation for nanomechanical systems presents an open-source framework for real-time Linear Quadratic Gaussian (LQG) control and…

In short

This work created an open-source framework for real-time Linear Quadratic Gaussian (LQG) control and hardware-in-the-loop (HIL) simulation on a low-cost Red Pitaya FPGA. It models nanomechanical systems like harmonic oscillators and shows how to deploy optimal feedback control using fixed-point arithmetic, making advanced control accessible for laboratory use.

Key concepts

LQG Controller
This is an optimal control method that combines two techniques: a Kalman filter for estimating the system's current state (like position and velocity) and a Linear Quadratic Regulator to calculate the best corrective actions. Together, they provide the most efficient way to control noisy systems.
Hardware-in-the-Loop (HIL) Simulation
This module simulates a physical system on the FPGA before it is connected to real hardware. It uses a detailed mathematical model of the system, including nonlinearities, to test how well a controller performs in real-time conditions without needing the actual physical nanomechanical device.
Fixed-Point Arithmetic
Instead of using standard floating-point numbers for calculations, this method uses fixed-point numbers. This technique balances computational speed and memory usage by representing decimal values with a set number of bits. It is crucial for running complex control algorithms efficiently on hardware like the FPGA.
State-Space Model
This is a mathematical way to describe how the system's internal variables (its state) change over time based on inputs and noise. The paper uses this model to represent three uncoupled harmonic oscillators, capturing the fundamental dynamics of many physical systems.

Terminology used across episodes

This episode discusses

The paper

FPGA-based LQG controller and hardware-in-the-loop simulator implementation for nanomechanical systems · Read on arXiv

Automation and Control Institute, TU Wien · AIT Austrian Institute of Technology

We present an open-source framework for real-time Linear Quadratic Gaussian (LQG) control and hardware-in-the-loop (HIL) simulation on the affordable Red Pitaya STEMlab FPGA platform. The controller implements a discrete-time Kalman filter and Linear Quadratic Regulator (LQR) for systems with up to three coupled oscillatory degrees of freedom, targeting applications in levitated optomechanics, MEMS/NEMS, and related experimental platforms. Complementing the controller, the HIL simulator provides a configurable second-order stochastic plant with nonlinear input and output mappings, enabling realistic closed-loop testing under real-time and fixed-point constraints. A MATLAB-based workflow automates model configuration, controller synthesis, numerical scaling, and FPGA deployment without requiring specialized hardware expertise. As an end-to-end demonstration, we present the stabilization of a levitated nanoparticle in a two-dimensional double-well potential, illustrating the complete workflow from model definition and simulation to real-time feedback control. The codebase: https://github.com/TU-Wien-ACIN-CDS/FPGA-based-LQG-and-HIL-simulator-for-nanomechanical-systems

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "FPGA-based LQG controller and hardware-in-the-loop simulator implementation for nanomechanical systems".

Paper summary: Rosa: Thinking about the title, FPGA-based LQG controller and hardware-in-the-loop simulator implementation for nanomechanical systems, it really highlights how they’re merging theoretical control methods with actual accessible hardware >

Dev: Yeah, the authors are presenting this integrated open source platform designed specifically for platforms like the Red Pitaya STEMlab board >

Taro: It seems like the real value here is in taking complex control theory that used to require expensive specialized setups and putting it onto something widely adopted >

Rosa: Precisely. The implication is that you can get high speed state estimation and optimal control running on low cost hardware for experiments where noise and external disturbances are a major factor >

Dev: It gives researchers a solid, reproducible foundation for testing feedback algorithms in areas like levitated optomechanics without needing to reinvent the wheel or build custom hardware from scratch >

Taro: So it’s about democratizing the ability to do these kinds of high speed control experiments by making the tools available through a MATLAB workflow and an API server >

Rosa: That’s right. They are providing a way for people who might not be deep hardware engineers to deploy and test these sophisticated control schemes in a real world setting quickly >

Conclusion: Rosa: So we're wrapping up this piece on this FPGA stuff for controlling tiny mechanical things, focusing on that LQG controller and the hardware in the loop simulator setup.

Dev: Yeah, looking at that title, it’s pretty specific. It tells you exactly what they built—a real-time control system running on an affordable platform called the Red Pitaya STEMlab FPGA board.

Rosa: And it seems like the authors are trying to bridge a gap between the heavy control theory you learn in a textbook and actually getting that working on something that’s not super expensive or specialized hardware.

Dev: Exactly. They’re showing how you can take those complex ideas about optimal state estimation and feedback control, which usually need super powerful computers, and get them running fast on this kind of chip.

Rosa: It feels like the real implication is making high-speed state estimation and optimal control accessible for researchers who aren't already working in huge labs.

Dev: Right. The way they use fixed point arithmetic to fit all that math onto the hardware is key—it shows a practical way to keep things running in real time without needing super expensive processors.

Rosa: And then you have that hardware in the loop simulator, which lets you test your control code against a realistic model of how these nanomechanical systems actually behave before you even try it out on the actual physical thing.

Dev: That HIL part is crucial for safety and reliability. It means they can validate the controller's performance under noisy conditions or when things go wrong in a simulated environment first.

Rosa: So, it boils down to giving people a transparent, reproducible foundation for doing these advanced feedback experiments without needing to be an expert hardware engineer just to get started.

Dev: That’s the gist of it. It’s about lowering the technical hurdle for high-speed control on low-cost hardware. Next time we look at this, we'll see how they actually demonstrated this with a specific experiment involving a levitated nanoparticle in a double well potential.

More episodes

← Home