Differentiable Filtering for Inertial Odometry
summary
The gist
Accurate inertial odometry is critical for autonomous systems but suffers from unbounded drift caused by the integration of sensor noise and biases The proposed system is validated on public…
In short
DFIO improves inertial odometry by combining an error-state Kalman filter with a neural network to predict sensor errors and uncertainties. This method reduces translation errors by 13.2% and one-second relative translation errors by 39.6% compared to existing baselines, proving its effectiveness even with uncalibrated smartphone data.
Key concepts
- Error-State Kalman Filter (ESKF)
- The ESKF is a mathematical tool used to estimate the state of a system, like an IMU's position and orientation. It works by propagating the system's state using known physics (IMU kinematics) while simultaneously correcting for errors caused by sensor noise and biases. This allows it to track movement more accurately over time.
- IncNet
- IncNet is a temporal neural network designed to predict two things: how much the system is displaced in 3D space and the uncertainty (covariance) of that prediction. It takes raw IMU data and predicts these values in a gravity-aligned frame, helping to model complex measurement errors that traditional filters might miss.
- Posterior-Position Supervision
- This training technique involves using the estimated position from the filter as a target for training the neural network. The network is refined by minimizing a loss function based on this corrected position, ensuring that the neural predictions align closely with the actual movement derived from the filter's state estimation.
- Gravity-Aligned Frame (G)
- This is a specific reference frame used to simplify how the neural network processes IMU measurements. By transforming raw sensor data into this frame, IncNet can learn more general and robust patterns for predicting displacement and uncertainty, making the model less sensitive to the specific orientation of the device.
Terminology used across episodes
This episode discusses
- Differentiable Filtering for Inertial Odometry · Paper Radio
- An Empirical Evaluation of Generic Convolutional and Recurrent Networks for Sequence Modeling
- Differentiable Particle Filters: End-to-End Learning with Algorithmic Priors
The paper
Differentiable Filtering for Inertial Odometry · Read on arXiv
Yaru Gu, Ting Zou
Department of Mechanical and Mechatronics Engineering, Memorial University of Newfoundland
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: We're looking at the paper: "Differentiable Filtering for Inertial Odometry".
Paper summary: Rosa: So we talked about the core idea of "Differentiable Filtering for Inertial Odometry", which is using a neural network, IncNet, to predict displacement increments and measurement covariances inside an error state Kalman filter framework. The authors claim this approach embeds the update stages of that filter directly into a computational graph.
Dev: Essentially, they start with raw IMU measurements driving the analytical error state Kalman filter propagation and then feed those measurements into IncNet to predict the three dimensional displacement increment and its associated covariance within that local gravity aligned frame.
Taro: The key is that after initial standalone pre-training, they use posterior position supervision through differentiable measurement updates to refine both the displacement prediction head and the covariance prediction head of IncNet simultaneously.
Rosa: They are optimizing these heads jointly using this feedback loop based on where the filter actually ends up being, which is a step beyond just training the network to predict displacement in isolation.
Dev: This entire process is validated on public pedestrian motion datasets that include both calibrated and uncalibrated inertial measurements, showing tangible performance gains over baselines like TLIO.
Taro: The results they reported are that DFIO reduces mean absolute and one second relative translation errors by thirteen point two percent and thirty nine point six percent relative to the TLIO baseline on a pedestrian dataset.
Rosa: And they also tested its effectiveness on uncalibrated smartphone inertial data, where it successfully mitigates translational drift while maintaining trajectory alignment under highly noisy sensor conditions.
Dev: The method is structured around this idea of having the analytical IMU propagation model of the error state Kalman filter remain deterministic, while the learnable parts are that neural measurement predictions and their uncertainties.
Taro: This structure lets them keep the known kinematics of how motion propagates while only learning how to best predict those noisy increments and uncertainties.
Rosa: It’s about combining a strong analytical foundation with a data-driven correction mechanism that learns how to handle the noise and bias better during the filtering process.
Dev: The methodology involves this two stage training strategy, moving from minimizing mean squared error against ground truth displacement in phase one to using marginal negative log likelihood in phase two for refinement.
Taro: That coupling between the supervised learning of displacement and covariance heads is what lets them achieve the lowest mean absolute translation error, which was one point six hundred ninety-nine meters on their test set.
Rosa: So, to sum up this paper, DFIO introduces a framework where a temporal network predicts motion and uncertainty that feeds back into a differentiable filter update process during training.
Conclusion: Rosa: Looking at "Differentiable Filtering for Inertial Odometry" by Yaru Gu and Ting Zou, the core idea is embedding the error state Kalman filter's update stages directly into a computational graph using a neural network called IncNet.
Dev: The authors claim this framework jointly optimizes the displacement and covariance heads using posterior position supervision through differentiable measurement updates after an initial standalone pre-training phase.
Taro: They demonstrate that this approach reduces mean absolute and one second relative translation errors by thirteen point two percent and thirty nine point six percent when tested on pedestrian motion datasets.
Rosa: More importantly, they show that it handles noisy, uncalibrated inertial measurements well, maintaining alignment even when the initial gyroscope and accelerometer biases are set to zero because there was no prior calibration data.
Dev: The implication is that for systems needing accurate tracking of movement in real time, you can leverage a learning component to actively correct the filter state based on how well the prediction matches reality.
Taro: It suggests that this learned inertial measurement model provides a way to extract information about motion itself from data when traditional methods rely heavily on unconstrained integration.
Rosa: And they are making the source code public, which is always beneficial for others who want to explore this specific approach to inertial odometry.
Dev: So, in simple terms, DFIO is a learning framework that improves inertial odometry by using a neural network to predict motion and uncertainty that directly influences the filter update process during training.
More episodes
- 2608.13438-ContactGuard: Pre-Contact Execution Monitoring with Action-Conditioned Latent World Models
- 2610.34593-Future Prediction as Training-Only Video Supervision for Pretrained VLA Policies
- 2610.35385-EmbodiedLab: Beyond Manipulation, Benchmarking Embodied Agents That Act to Know
- 2610.36378-Data-Driven Hamiltonian for Neural Optimal Control
- 2610.37275-A Heuristic for Scheduling Autonomous Vehicles at Intersections
- 2610.37288-Dynamic Coordination of Autonomous Vehicles at Intersections
- 2610.37632-Real-Time Coordination of Autonomous Vehicles at Intersections
- 2611.13779-Softness is something you also need! Why compliance helps control: information metrics of a passive walker with compliant ankle
- 2611.13411-Residual-Corrected Physics-Informed Neural Network KKL Observers with Input-to-State Stability Guarantees
- 2611.14488-Is Your Robot's Memory Just a Clock? Temporal Shortcuts in Memory-Augmented VLA Policies