Data-driven current control of modular multilevel converter-based HVDC transmission system

summary

The gist

Model-based design (MBD) is a mature framework for designing the current controllers of modular multilevel converters (MMCs) in high-voltage direct current (HVDC) transmission systems.

In short

This study developed a data-driven current control method called integral Subspace Predictive Control (iSPC) for Modular Multilevel Converters (MMCs) in HVDC systems. By using input-output data from a simulator, the researchers created a model to propose systematic guidelines for tuning iSPC parameters like prediction horizon and excitation signal type. This method showed faster response and lower tracking error compared to other methods.

Key concepts

Model-based design (MBD)
A mature framework used to design controllers by exploiting mathematical models and control theory. It systematically synthesizes controllers with desired properties like stability, using linear state-space models as the preferred approach for MMCs.
Data-driven predictive control (DPC)
A predictive control method that relies on identified model or measured input-output data instead of explicit identification. It uses Hankel matrices constructed from collected I/O data to estimate unknown system matrices, allowing for prediction and control without a separate identification step.
Integral Subspace Predictive Control (iSPC)
A specific data-driven predictive control algorithm developed for MMC current control. It utilizes input-output data to build a dynamic model and uses this model within a predictive framework to generate the optimal control signal, aiming for better performance than standard methods.
Prediction Horizon (N)
The number of future time steps the controller looks ahead when making decisions. The study found that selecting the optimal prediction horizon is crucial; increasing it improves control performance but increases computational load. Tuning this parameter is a key guideline proposed by the research.

Terminology used across episodes

This episode discusses

The paper

Data-driven current control of modular multilevel converter-based HVDC transmission system · Read on arXiv

Delft University of Technology

Model-based design (MBD) is a mature framework for designing the current controllers of modular multilevel converters (MMCs) in high-voltage direct current (HVDC) transmission systems. In MBD, linear state-space models are preferred for their good trade-off between accurate dynamics prediction and simplicity. However, first-principle derivations often neglect relevant MMC dynamics, which can hinder controller performance. Data-driven (DD) methods can deliver less biased models that capture parameter uncertainties, control-loop interactions, and grid dynamics, yet they remain under-exploited for controlling MMC currents. This paper studies DD current control method based on integral Subspace Predictive Control (iSPC), synthesized directly from input--output data measured in a high fidelity real-time digital simulator (RTDS), and proposes an initial guideline outlining the main steps for its systematic application to MMC current control. The proposed iSPC is compared against state-of-the-art DD solution, and the findings are validated through simulation studies in MATLAB/Simulink.

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Data-driven current control of modular multilevel converter-based HVDC transmission system".

Dev: Here's the gist of the paper. Model-based design (MBD) is a mature framework for designing the current controllers of modular multilevel converters (MMCs) in high-voltage direct current (HVDC) transmission systems.

Rosa: This paper studies a data-driven (DD) current control method based on integral Subspace Predictive Control (iSPC), synthesized from input–output data measured in a high fidelity real-time digital simulator to propose an initial guideline for its systematic application to MMC current control.

Dev: High-voltage direct current (HVDC) systems increasingly rely on modular multilevel converters (MMCs) due to their high efficiency, scalability, robustness, and low harmonic distortion.

Rosa: The performance and safe operation of MMCs strongly depend on the design of their control systems, particularly the current controllers.

Paper summary: Rosa: So, we're wrapping up this look at the paper "Data-driven current control of modular multilevel converter-based HVDC transmission system." It’s about taking those complex modular multilevel converters in high voltage direct current systems and designing their current controllers using a data driven approach.

Dev: Yeah, yeah, it’s about taking those complex modular multilevel converters in high voltage direct current systems and designing their current controllers using a data driven approach. Basically, they synthesized an integral subspace predictive control method directly from input output measurements taken during real time simulation.

Taro: That means they didn't just rely on standard math equations for the model; they used actual operational data to build a better one.

Rosa: It’s about moving away from purely first principle modeling, where you try to guess every single interaction between the layers of the control system.

Dev: The paper found that this data driven approach was able to capture some cross coupling effects between output currents and those circulating currents that traditional models often miss.

Taro: That's significant because those interactions are usually where things go wrong in real hardware, especially under noisy conditions or when the digital delays kick in.

Rosa: The implication is that instead of just trying to build a perfect theoretical model from scratch, you can start with what you actually measure during testing.

Dev: They also proposed some concrete guidelines for tuning this method, telling people how to choose the prediction horizon and what kind of excitation signal they need.

Taro: It shows that this isn't just some abstract idea; it’s a practical tool that can be applied systematically to design these current controllers.

Rosa: So, the big takeaway here is that using real data can give you a much more robust starting point for your predictive controller design than just relying on textbook state space models.

Dev: It opens the door for designing systems where you account for those real world imperfections right from the beginning of the control synthesis process.

Taro: And since they are planning to test this method directly on a real time digital simulator, we gotta watch that next step closely.

Conclusion: Rosa: So we’re wrapping up this look at "Data-driven current control of modular multilevel converter-based HVDC transmission system."

Dev: Yeah, yeah, it’s about taking those complex modular multilevel converters in high voltage direct current systems and designing their current controllers using a data driven approach.

Taro: Basically, they synthesized an integral subspace predictive control method directly from input output measurements taken during real time simulation.

Rosa: That means they didn't just rely on standard math equations for the model; they used actual operational data to build a better one.

Dev: It’s about moving away from purely first principle modeling, where you try to guess every single interaction between the layers of the control system.

Taro: The paper found that this data driven approach was able to capture some cross coupling effects between output currents and those circulating currents that traditional models often miss.

Rosa: That's significant because those interactions are usually where things go wrong in real hardware, especially under noisy conditions or when the digital delays kick in.

Dev: The implication is that instead of just trying to build a perfect theoretical model from scratch, you can start with what you actually measure during testing.

Taro: They also proposed some concrete guidelines for tuning this method, telling people how to choose the prediction horizon and what kind of excitation signal they need.

Rosa: It shows that this isn't just some abstract idea; it’s a practical tool that can be applied systematically to design these current controllers.

Dev: So, the big takeaway here is that using real data can give you a much more robust starting point for your predictive controller design than just relying on textbook state space models.

Taro: It opens the door for designing systems where you account for those real world imperfections right from the beginning of the control synthesis process.

Rosa: And since they are planning to test this method directly on a real time digital simulator, we gotta watch that next step closely.

More episodes

← Home