Connectivity-Aware Representations for Constrained Motion Planning via Multi-Scale Contrastive Learning
summary
The gist
The objective of constrained motion planning is to connect start and goal configurations while satisfying task-specific constraints <ref:2603.25298#pg2> Motion planning becomes inefficient or…
In short
The method learns a connectivity-aware representation for selecting start and goal configurations in constrained motion planning. It uses manifold learning and multi-scale contrastive learning to create embeddings where close points mean higher connectivity probability. This helps avoid disconnected regions, leading to faster planning and higher success rates.
Key concepts
- EMD Components
- Essentially Mutually Disconnected components are regions in configuration space that are separated by obstacles or constraints, making motion between them impossible. Planning fails if the start and goal configurations fall into these disconnected areas.
- Manifold Learning
- This technique is used to map complex, high-dimensional configuration data onto a lower-dimensional space while preserving the underlying geometric structure. It helps reveal the true shape of the feasible motion paths within a constrained system.
- Multi-scale Contrastive Learning
- This training method uses pseudo-labels generated at different neighborhood sizes to supervise a neural network. By incorporating information from various granular scales, the resulting feature space learns connectivity across multiple levels of detail.
Terminology used across episodes
This episode discusses
- Connectivity-Aware Representations for Constrained Motion Planning via Multi-Scale Contrastive Learning · Paper Radio
- CORN: Contact-based Object Representation for Nonprehensile Manipulation of General Unseen Objects
- UMAP: Uniform Manifold Approximation and Projection for Dimension Reduction
- Auto-Encoding Variational Bayes
The paper
Connectivity-Aware Representations for Constrained Motion Planning via Multi-Scale Contrastive Learning · Read on arXiv
Seoul National University · Artificial Intelligence Institute (AIIS) · “Kwangwoon University”
The objective of constrained motion planning is to connect start and goal configurations while satisfying task-specific constraints. Motion planning becomes inefficient or infeasible when the configurations lie in disconnected regions, known as essentially mutually disconnected (EMD) components. Constraints further restrict feasible space to a lower-dimensional submanifold, while redundancy introduces additional complexity because a single end-effector pose admits infinitely many inverse kinematic solutions that may form discrete self-motion manifolds. This paper addresses these challenges by learning a connectivity-aware representation for selecting start and goal configurations prior to planning. Joint configurations are embedded into a latent space through multi-scale manifold learning across neighborhood ranges from local to global, and clustering generates pseudo-labels that supervise a contrastive learning framework. The proposed framework provides a connectivity-aware measure that biases the selection of start and goal configurations in connected regions, avoiding EMDs and yielding higher success rates with reduced planning time. Experiments on various manipulation tasks showed that our method achieves 1.9 times higher success rates and reduces the planning time by a factor of 0.43 compared to baselines.
DOI: 10.1109/ICRA57385.2026.11695702.
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: We're looking at the paper: "Connectivity-Aware Representations for Constrained Motion Planning via Multi-Scale Contrastive Learning".
Dev: Here's the gist of the paper. The objective of constrained motion planning is to connect start and goal configurations while satisfying task-specific constraints <ref:2603.25298#pg2> Motion planning becomes inefficient or infeasible when the configurations lie in disconnected regions, known as essentially mutually disconnected (EMD) components <ref:2603.25298#pg2> Constraints further restrict feasible space to a lower-dimensional submanifold, while redundancy introduces additional complexity because a single end-effector pose admits infinitely many inverse kinematic solutions that may form discrete self-motion manifolds <ref:2603.25298#pg2> This paper addresses these challenges by learning a connectivity-aware representation for selecting start and goal configurations prior to planning <ref:2603.25298#pg2> The proposed framework provides a connectivity-aware measure that biases the selection of start and goal configurations in connected regions, avoiding EMDs and yielding higher success rates with reduced planning time <ref:2603.25298#pg2>.
Rosa: The core problem addressed A central difficulty in constrained motion planning is that the exact structure of the constraint-induced manifold is unknown <ref:2603.25298#pg2> Traditional approaches have focused on extending sampling-based planners to handle such constraints through manifold projection, geodesic distances, or local planners designed to respect constraints <ref:2603.25298#pg2> In redundant manipulators, a single end-effector pose admits infinitely many inverse kinematic solutions that may form continuous self-motion manifolds or fragment into discrete components <ref:2603.25298#pg2> Given a start pose and a goal pose, each admits multiple inverse kinematics solutions, yielding many start–goal configuration pairs whose connectivity is unknown <ref:2603.25298#pg2> Different choices of start and goal configurations lead to different planning performances: (i) connected configuration pairs can be solved quickly, (ii) configuration pairs separated by planner-hard environments, such as narrow passages, require significantly longer search time, and (iii) truly disconnected configuration pairs lead to planning failure <ref:2603.25298#pg2>.
Dev: How the training signal is built The proposed method proceeds in two stages to construct a feature-space where shorter distances between points correspond to a higher probability of connectivity <ref:2603.25298#pg2> First, manifold learning is applied at multiple neighborhood scales to obtain embeddings, and each embedding is clustered to generate pseudo-labels <ref:2603.25298#pg2> Second, these pseudo-labels supervise a neural network via multi-scale contrastive learning, where pseudo-labels from different scales are jointly incorporated so that the feature-space reflects connectivity information across multiple levels of granularity <ref:2603.25298#pg2>.
Rosa: The contrastive loss at scale k is defined using the InfoNCE objective <ref:2603.25298#pg2> This loss aims to structure a feature-space by pulling together samples that are similar and pushing apart those that are dissimilar <ref:2603.25298#pg2>.
Paper summary: Rosa: So we're looking at this paper called "Connectivity-Aware Representations for Constrained Motion Planning via Multi-Scale Contrastive Learning," and basically, it’s about solving a problem where connecting a starting point to a goal point is hard because of task constraints.
Dev: Right, so motion planning gets really inefficient or even impossible if the start and goal configurations are in these things called essentially mutually disconnected or EMD components.
Rosa: And that’s when the constraints matter, because they cut down the space we can actually move in to a lower dimensional submanifold, and redundancy just makes it infinitely complicated with all those different inverse kinematics solutions.
Taro: It means you could have these configuration pairs whose connectivity is completely unknown, which leads to some really bad planning performances depending on how far apart they are or how tight the environment is.
Rosa: So what this paper claims to do is learn a way to select those start and goal configurations before you even start planning by creating a representation that understands connectivity.
Dev: They propose using this framework where shorter distances in the feature space correspond to a higher probability of actual physical connectivity, which should help us avoid those EMD components.
Taro: The paper sets up this two-stage training process first by using manifold learning at multiple neighborhood scales to get some embeddings, and then clustering those embeddings to create pseudo-labels.
Rosa: And then these pseudo-labels supervise a neural network through multi-scale contrastive learning, which is where they pull together the information from different scales so the feature space reflects connectivity at many levels.
Dev: The math behind this is using an InfoNCE objective to structure that feature space, essentially pulling similar samples closer and pushing dissimilar ones farther apart.
Taro: So what you get as a result is this connectivity-aware representation where configurations in connected and easily accessible regions are embedded close together, while disconnected ones are separated.
Rosa: They model the connectivity measure between two configurations, say q start and q goal, as an exponential of the negative squared distance between their embeddings.
Dev: That means the probability that they can actually connect is related to how close their feature vectors are in this learned space.
Taro: So for practical use, this helps you select start and goal IK solutions that are more likely to be connected under constrained motion planning tasks.
Rosa: The results show that on various manipulation tasks, this method achieved a success rate one point nine times higher than baselines and reduced the planning time by a factor of zero point four three compared to those methods <ref:2603.25298#pg1>.
Dev: That’s an improvement in both success and speed, which is what we need when dealing with real-time loops where latency matters.
Taro: The implementation involves a feature encoder, which is a four-layer neural network with ReLU activations, and then a two-layer projection head to create those final embeddings.
Rosa: For training they used the Adam optimizer with a learning rate of ten to the negative four, running for five thousand epochs with a batch size of one thousand twenty-four.
Dev: They also generated those pseudo-labels using UMAP with neighborhood sizes between three and fifty, and then HDBSCAN clustering, looking for clusters that are at least twenty members large.
Taro: And I should point out that the inference time to embed a configuration into this latent space is only about zero point seven eight three milliseconds, which is really negligible compared to the actual planning time you’d spend.
Rosa: So this whole idea is about learning these embeddings to guide our search process, focusing on configurations that are known or likely to be connected.
Dev: It tackles the core problem that we don't know the exact structure of the constraint-induced manifold beforehand, which is a big headache for traditional planners.
Taro: The paper’s limitation is that it focuses on learning this representation for pre-planning, so it doesn't necessarily solve all issues related to real-time error handling or graceful recovery when the world misbehaves during the actual motion execution.
Rosa: So, in conclusion, this paper presents a connectivity-aware representation learning framework that uses manifold learning and contrastive learning to build embeddings that capture both local and global connectivity for constrained motion planning.
Dev: It’s about biasing our selection of start and goal poses toward regions known to be connected under those complex constraints.
Taro: This could mean much faster planning times for complex robotic tasks where the configuration space is tricky, but we need to keep in mind it’s a pre-planning tool.
Rosa: We should also consider how they might adapt this by conditioning the network on specific task parameters or constraints, perhaps learning shared structures across different related manifolds.
Dev: That sounds like a good next step for future work to make it more versatile across different applications.
Conclusion: Rosa: So we've been looking at this paper called "Connectivity-Aware Representations for Constrained Motion Planning via Multi-Scale Contrastive Learning," and it’s about how to pick good start and goal points when you have those tricky task constraints.
Dev: Right, so they build a way to map those configurations into a space where closeness means they're actually connected physically, even when the constraints are weird.
Rosa: It sounds like they learned something about the hidden structure of the constraint space before you even start planning.
Dev: Exactly, it's about learning that connectivity information at different levels so you can choose start and goal poses that are more likely to work together under those rules.
Taro: So instead of just guessing which starting point is good, the AI uses this learned representation to give you a better chance of success.
Rosa: And the results they showed on manipulation tasks were pretty solid, showing higher success rates and less planning time compared to their older methods.
Dev: It's about making that search process smarter by using this connectivity measure instead of just brute force checking every possible pair.
Taro: That means for complex robotic tasks where the space is really tight, you might save a lot of computational time because you’re not wasting effort on pairs that can never connect.
Rosa: It suggests that for constrained motion planning, understanding the underlying connectivity is a way to make those searches much more efficient.
Dev: So this framework gives us a tool to avoid getting stuck in those disconnected regions we talked about earlier when using these planners.
More episodes
- 2608.13438-ContactGuard: Pre-Contact Execution Monitoring with Action-Conditioned Latent World Models
- 2610.34593-Future Prediction as Training-Only Video Supervision for Pretrained VLA Policies
- 2610.35385-EmbodiedLab: Beyond Manipulation, Benchmarking Embodied Agents That Act to Know
- 2610.36378-Data-Driven Hamiltonian for Neural Optimal Control
- 2610.37275-A Heuristic for Scheduling Autonomous Vehicles at Intersections
- 2610.37288-Dynamic Coordination of Autonomous Vehicles at Intersections
- 2610.37632-Real-Time Coordination of Autonomous Vehicles at Intersections
- 2611.13779-Softness is something you also need! Why compliance helps control: information metrics of a passive walker with compliant ankle
- 2611.13411-Residual-Corrected Physics-Informed Neural Network KKL Observers with Input-to-State Stability Guarantees
- 2611.14488-Is Your Robot's Memory Just a Clock? Temporal Shortcuts in Memory-Augmented VLA Policies