Quantifying Ultrafast Orbital Pumping and Nanometre-Scale Orbital Diffusion in Magnetic Heterostructures
summary
The gist
Spin and orbital pumping – the injection of spin and orbital angular momentum from a driven ferromagnet into an adjacent nonmagnetic layer – are fundamental processes underlying angular-momentum…
In short
The study used ultrafast spin-to-charge and orbital-to-charge conversion detected by STES to quantitatively separate simultaneous spin and orbital angular momentum pumping in magnetic heterostructures. By controlling layer thickness with wedge samples, researchers found that orbital diffusion lengths are shorter than spin diffusion lengths and depend on the material's spin-orbit coupling strength.
Key concepts
- Spin Hall (SH) Angle ($\gamma_{SH}$ NM)
- This angle describes how an electric current flowing through a nonmagnetic layer causes a transverse spin current to be generated. The paper uses this property, along with the orbital Hall angle, to determine the relative contributions of spin and orbital pumping in heterostructures.
- Orbital Hall (OH) Angle ($\gamma_{OH}$ NM)
- Similar to the Spin Hall angle, this describes how an electric current induces a transverse orbital angular momentum current. By having opposite signs for $\gamma_{SH}$ and $\gamma_{OH}$, researchers could assign distinct polarities to the spin and orbital pumping signals.
- Spin Diffusion Length ($\lambda_S$) vs. Orbital Diffusion Length ($\lambda_L$)
- These lengths quantify how far spin or orbital angular momentum can travel before decaying. The findings consistently show that the orbital diffusion length is shorter than the spin diffusion length across all tested materials, suggesting OAM transport is more localized.
- Multi-component Terahertz Emission Model (MC-TEM)
- This mathematical model was used to fit experimental terahertz emission data from heterostructures. It allowed researchers to quantitatively decompose the total signal into separate contributions from spin, orbital, and bare material effects as a function of layer thickness.
Terminology used across episodes
This episode discusses
- Quantifying Ultrafast Orbital Pumping and Nanometre-Scale Orbital Diffusion in Magnetic Heterostructures · Paper Radio
The paper
Quantifying Ultrafast Orbital Pumping and Nanometre-Scale Orbital Diffusion in Magnetic Heterostructures · Read on arXiv
Tongyang Guan, Jiahao Liu, Yuxiao Mo, Liangliang Zhu, Yizheng Wu, Zhensheng Tao
Fudan University
Quantifying ultrafast orbital pumping and transport remains challenging because spin and orbital currents contribute coherently to terahertz emission. Here, we combine spintronic terahertz emission spectroscopy with wedge-sample thickness control to disentangle these contributions in Fe, Co and Ni heterostructures with Ta, W and Nb. Their opposite spin Hall and orbital Hall polarities enable quantitative determination of relative pumping strengths and propagation lengths. We find that orbital pumping increases from Fe to Ni, with inferred orbital-to-spin current ratios reaching several tens of percent in Ni, exceeding current microscopic predictions. Remarkably, Nb exhibits an orbital diffusion length of ~1.5 nm, substantially longer than in Ta and W and beyond the sub-nanometre scale predicted by recent orbital-relaxation calculations. These findings provide quantitative experimental benchmarks for ultrafast orbital pumping and transport.
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Quantifying Ultrafast Orbital Pumping and Nanometre-Scale Orbital Diffusion in Magnetic Heterostructures".
Mira: Here's the gist of the paper. Spin and orbital pumping – the injection of spin and orbital angular momentum from a driven ferromagnet into an adjacent nonmagnetic layer – are fundamental processes underlying angular-momentum generation and transport in magnetic heterostructures.
Kai: Femtosecond optical excitation extends these phenomena into the ultrafast regime, where spintronic terahertz emission spectroscopy (STES) detects picosecond angularmomentum currents in a contact-free manner through spin-to-charge and orbital-tocharge conversion.
Mira: A central challenge is that spin and orbital currents are generated simultaneously and contribute additively to the same terahertz emission, preventing their quantitative separation.
Kai: Here, we overcome this limitation by combining STES with wedge-sample thickness control in heterostructures whose nonmagnetic layers (Ta, W, and Nb) have spin Hall and orbital Hall angles of opposite signs.
Paper summary: Kai: So this paper is titled "Quantifying Ultrafast Orbital Pumping and Nanometre-Scale Orbital Diffusion in Magnetic Heterostructures." It's about how spin and orbital angular momentum get pumped from a driven ferromagnet into a nearby nonmagnetic layer.
Mira: Exactly, it tackles the problem that when you excite this system with light in the ultrafast regime, both spin and orbital currents appear at the same time, making it hard to separate them.
Kai: The main thesis here is that they developed a way to quantitatively separate these two contributions using two different properties of the currents.
Mira: They use materials where the spin Hall angle and orbital Hall angle have opposite signs so that their resulting terahertz emissions have opposite polarities, which lets them tell them apart.
Lev: From an engineering standpoint, controlling the thickness of those nonmagnetic layers is key, using wedge-shaped samples to get continuous control over the layer thickness.
Kai: And they found that this method lets them decompose the signals based on both those different emission polarities and how the signal changes with that layer thickness.
Mira: What's really interesting from their systematic measurements on iron, cobalt, and nickel heterostructures is that the orbital pumping contribution actually gets progressively larger as you move toward nickel.
Lev: They found that for nickel, this orbital pumping contribution reaches several tens of percent of the spin current contribution, which is way higher than what theory predicted.
Kai: Even iron generates a non-negligible orbital current, especially when the magnetic layer is very thin, which suggests orbital effects matter even in small layers.
Mira: The results also show that the extracted orbital diffusion lengths are consistently shorter than the spin diffusion lengths and they get longer as the spin-orbit coupling strength of that nonmagnetic layer gets weaker.
Lev: That part about the diffusion lengths is important for real hardware because it tells us how far this orbital momentum can actually travel in these materials.
Kai: They looked at specific heterostructures like iron with tantalum, iron with tungsten, and iron with niobium to see different behaviors across those layers.
Mira: For instance, in iron with tantalum, the terahertz polarity stays negative from zero nanometers to twelve nanometers because the signal is dominated by spin-to-charge conversion in the tantalum.
Lev: But then you look at nickel with tantalum, and you see a polarity reversal happening around zero point three nanometers and it stays positive up to twelve nanometers, which they attribute to orbital-to-charge conversion.
Kai: That distinction between the spin-dominated behavior in iron with tantalum and the orbital-dominated behavior in nickel with tantalum is a clear way they're separating the two effects.
Mira: The theoretical benchmarking using their multi component terahertz emission model reproduces the thickness dependent amplitudes, including that threshold like behavior seen in iron with tantalum below zero point five nanometers.
Lev: The paper notes that for nickel based heterostructures, their estimated orbital current contribution can reach up to seventy percent of the total signal, which is much higher than what their microscopic theory predicted.
Kai: Their analysis of the orbital-to-spin current density ratio shows it's typically in the range of a few percent to about twenty percent for iron and cobalt, which lines up with microscopic theory for those metals.
Mira: But for nickel based heterostructures, that ratio can reach several tens of percent, up to seventy percent, which suggests a much stronger orbital pumping response than their theory accounted for.
Lev: The uncertainty they have in the spin hall and orbital hall angle values from different calculations gets into the inferred ratio, and that uncertainty ends up being bigger than their experimental error.
Kai: They looked at how these diffusion lengths change across tantalum, tungsten, and niobium to get a better picture of the transport.
Mira: They found that across all those heterostructures with tantalum, tungsten, and niobium, the orbital diffusion length is consistently shorter than the spin diffusion length in agreement with other recent studies.
Lev: Interestingly, they noted that the orbital diffusion length is markedly longer in niobium at one point around one point five nanometers compared to tantalum and tungsten which are smaller at about zero point three to zero point eight nanometers.
Kai: That difference in the diffusion lengths suggests that orbital angular momentum can actually transport deeper into the niobium layer, while how that length varies across different nonmagnetic layers shows that orbital propagation might depend on the spin-orbit coupling strength of the nonmagnetic layer.
Mira: So, this paper establishes terahertz emission spectroscopy as a quantitative way to probe coupled spin and orbital pumping by resolving their separate contributions.
Lev: The analysis also suggests that the secondary orbital-to-spin conversion in materials with finite spin orbit coupling might not play a significant role in the terahertz emission they were measuring.
Kai: They conclude that while this method helps benchmark microscopic theories of orbital generation and transport, further theoretical and experimental work on nickel based heterostructures is needed to fully understand the orbital current generation and interfacial transmission.
Conclusion: Kai: So, this paper is about figuring out how much spin and orbital momentum gets pumped when you drive a ferromagnet into an adjacent nonmagnetic layer at ultrafast timescales.
Mira: Yeah, it tackles that problem where both spin and orbital currents show up at once during optical excitation, making them hard to separate.
Kai: The authors developed a way to do that by picking materials with opposite spin and orbital Hall angles so the resulting signals have opposite polarities.
Mira: And they control the thickness of those nonmagnetic layers using wedge samples, which lets them decompose everything based on polarity and thickness dependence.
Kai: What's the big picture here? They found that for nickel systems, this orbital pumping contribution gets really big—sometimes tens of percent—which is way more than their theories predicted.
Mira: Even iron generates a noticeable orbital current in very thin layers, which is something you need to account for if you're building real devices.
Kai: They also measured the diffusion lengths and found that the orbital diffusion length is consistently shorter than the spin diffusion length, but it gets longer when the nonmagnetic layer has weaker spin-orbit coupling.
Mira: That difference in how far these currents travel matters a lot for designing magnetic heterostructures.
Kai: This work establishes terahertz emission spectroscopy as a way to actually measure and separate these coupled spin and orbital effects.
Mira: It gives us a solid benchmark for the microscopic theories describing how orbital angular momentum is generated and transported in these structures.
Kai: The paper suggests that the secondary conversion from orbital to spin isn't playing a big role in the signal they measured, which simplifies things somewhat.
Mira: But they point out that for nickel based systems, you still need more theoretical and experimental work to fully understand how those orbital currents are generated at the interface.
More episodes
- 2603.29754-Coherent and dissipative energy transfer in driven open quantum systems: a driven quantum master equation approach
- 2604.01157-Thermal Entanglement and Out-of-Equilibrium Thermodynamics in 1D Bose Gases
- 2604.06410-Directional and correlated optical emission from a waveguide-engineered molecule with local control
- 2604.07214-Quantum Gibbs sampling through the detectability lemma
- 2604.13165-Finite-size Entanglement Certification via Third-Order Local Randomized Measurements
- 2604.18542-Dissipative Preparation of Correlated Quantum States in Dipolar Rydberg Arrays
- 2605.00096-Scalable spin-nematic squeezing in multi-level dipole-interacting Rydberg atom arrays
- 2605.02565-Sample-Based Quantum Diagonalization with Amplitude Amplification
- 2605.20111-Mechanism of wavefunction collapse in measurements of separated quantum subsystems
- 2606.05097-No-Go Theorem for Gaussian Quantum Repeaters from Fractional Extendibility