Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR

summary

The gist

Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR is the first measurement to directly investigate the relation between anisotropic flow and…

In short

This study measured local polarization of hyperons in Au+Au collisions using Event Shape Engineering (ESE) to link anisotropic flow and polarization. By selecting events based on flow magnitude, researchers found a positive correlation between elliptic flow ($v_2$) and the polarization component ($P_{z,2}$) for $\Lambda$ particles, suggesting a relationship between the two phenomena.

Key concepts

Anisotropic Flow
This is the collective motion of particles produced in heavy-ion collisions that results in an asymmetry in momentum distribution. It is expected to generate local vorticities along the beam direction, which are theorized to be the source driving hyperon polarization.
Event Shape Engineering (ESE)
This technique selects specific events based on their collective flow magnitude within a narrow centrality range. By focusing on events with different flow characteristics ($q_2$), researchers can isolate and measure how local polarization changes as the anisotropic flow varies.
$v_2$ and $P_{z,2}$
$v_2$ is the elliptic flow, which describes the collective motion of particles in a plane. $P_{z,2}$ is the polarization component measured along a specific axis related to this flow. Measuring both allows researchers to study how the anisotropic flow influences local spin alignment.
Reduced Flow Vector Magnitude ($q_2$)
$q_2$ is a measure of the second-order flow vector magnitude, calculated from charged tracks. It is normalized by particle momentum and transverse momentum to compare events within the same centrality bin, allowing for a systematic study of how flow strength affects polarization.

Terminology used across episodes

This episode discusses

The paper

Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR · Read on arXiv

Taiki Kondoa

University of Tsukuba · STAR Collaboration

Anisotropic flow is expected to generate local vorticities along the beam direction, which in turn lead to local polarization of produced particles. Although the local polarization of hyperons has already been observed at RHIC and the LHC, its mechanism is not yet understood: model calculations indicate that the shear-induced and vorticity-induced contributions can have opposite signs and may substantially cancel, so that the resulting polarization depends sensitively on the theoretical implementation. Since both are driven by the anisotropic flow, we employ the Event Shape Engineering (ESE) method, which selects events with different flow magnitudes within a narrow centrality range, to measure the local polarization as a function of the elliptic flow at a fixed multiplicity. We report the measurements of the elliptic flow (v 2) and the local polarization (P z,2) of Λ and Λ as a function of the reduced flow vector magnitude q 2 used for the ESE event selection, in Au+Au collisions at sqrt s NN = 19.6 GeV from the STAR experiment. The v 2 shows a clear positive dependence on q 2, while P z,2 indicates a weak positive dependence on q 2 and v 2. This is the first measurement to directly investigate the relation between anisotropic flow and local polarization, providing new insight into the origin of local polarization.

DOI: 10.1016/j.jspc.2026.100494

Transcript

Introduction to the show: ident: Nuclear Experiment. The day in nuclear experiment: beams, targets and what came out.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR".

Mira: Here's the gist of the paper. Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR is the first measurement to directly investigate the relation between anisotropic flow and local polarization.

Kai: Anisotropic flow is expected to generate local vorticities along the beam direction, which in turn lead to local polarization of produced particles.

Mira: Although the local polarization of hyperons has already been observed at RHIC and the LHC, its mechanism is not yet understood.

Kai: Model calculations indicate that the shear-induced and vorticity-induced contributions can have opposite signs and may substantially cancel, so that the resulting polarization depends sensitively on the theoretical implementation.

Title and authors: Kai: So we're looking at this paper, "Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR." It’s about measuring local polarization using a technique called event shape engineering in heavy-ion collisions.

Mira: Yeah, it’s a measurement focusing on how the anisotropic flow relates to the local spin alignment of hyperons. The authors Taiki Kondoa and the STAR Collaboration did this work at the University of Tsukuba.

Lev: So what this means for us is that they are connecting two things: anisotropic flow and local polarization in these collisions. That’s a key piece of the puzzle we're trying to figure out about how hyperons get polarized.

Kai: Exactly, and the paper sets up a way to look at this connection using event shape engineering, which lets them select events with different flow magnitudes within a narrow centrality range. This helps them see how polarization changes as the elliptic flow varies for a fixed multiplicity.

Mira: The core idea they’re investigating is that anisotropic flow is expected to create local vorticities along the beam direction, and those vorticities should lead to local polarization of the particles produced. But model calculations show that there are two contributions, shear-induced and vorticity-induced, which can have opposite signs and might cancel out a lot.

Lev: That cancellation is what makes it sensitive to how you implement the theory; if the theory says one term dominates or cancels another, your experimental result will change depending on that.

Kai: So they use this ESE method to measure the elliptic flow, called v2, and a polarization component Pz,two for both lambda and anti-lambda hyperons as a function of the reduced flow vector magnitude q2 <ref:2610.25989#pg1,as a function of the reduced flow vector magnitude q2>. This q2 is calculated from charged tracks with transverse momentum between zero point one five GeV/c and two point zero GeV/c to try and suppress non-flow effects from jet fragmentation <ref:2610.25989#pg2,is calculated from charged tracks with>.

Mira: And they report that the v2 dependence for lambda hyperons shows a clear positive dependence on q2 across all combinations of event plane Psi2 and q2, which is consistent across all approaches they tested.

Title and authors: Lev: For the polarization part, Pz,two measured using the TPC event plane and TPC q2 shows a slight positive dependence on q2 with a significance of approximately two point five sigma. That suggests there is indeed a possible correlation between the elliptic flow and this local polarization for lambda plus anti-lambda hyperons.

Kai: But they also mention that the intercept of the linear fit to Pz,two as a function of v2 might carry information about contributions not directly linked to the elliptic flow, but they admit it's obtained by extrapolating to v2 equals zero, so it isn't totally conclusive yet <ref:2610.25989#pg1>.

Mira: So what this means for us is that we have a measurement showing a potential link between anisotropic flow and hyperon spin alignment in heavy-ion collisions. This could help us understand the underlying mechanism driving polarization in these environments.

Lev: I think the systematic uncertainties they address are important; they tested four combinations of event plane and q2, including combinations like PsiSub two TPC and qSub two TPC to check for self-correlation effects where the lambda daughter tracks are excluded from Q-vector calculations to avoid that <ref:2610.25989#pg1>.

Kai: And they also focus on purity, P, which they get by fitting the invariant mass distribution with a Student’s t-function for the signal and a first-order polynomial for the background in each centrality bin. The signal values S then are extracted using S equals S obs minus one minus P times S bkg over P.

Mira: That level of detail in separating the signal from the background is crucial because if you don't get that right, you can't trust whether the correlation they see is real or just a statistical artifact.

Lev: From an engineering standpoint, when we think about running this on real hardware, they are looking at how much overhead that measurement adds to what we can actually achieve in terms of precision. They also note that the combination utilizing the TPC-Full event plane and TPC-Full q2 gives the best statistical sensitivity.

Title and authors: Kai: So for the future, they plan to apply these event shape engineering measurements to Au+Au collision datasets at sqrt(sNN) equals two hundred GeV to see if these trends continue in more energetic collisions.

Mira: The consistency they found among the different combinations suggests that biases associated with shared particles are small within their present uncertainties, which is a good sign for interpreting their results.

Lev: If we look at the whole picture of this paper on "Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR," it shows a pathway to use flow measurements to probe spin physics in dense matter. It’s a solid step forward in understanding these phenomena.

Kai: So, the main thing is that they are directly investigating the relation between anisotropic flow and local polarization, which wasn't fully understood before. This helps constrain the theoretical models of how polarization arises from flow.

Mira: We see this measurement as providing constraints on those models because it tests whether the shear and vorticity contributions cancel out as predicted by theory or if one remains dominant.

Lev: And for us building error correction hardware, seeing a correlation like this means we need to be careful how we model noise and flow effects when simulating any spin alignment in a heavy-ion environment.

Kai: So, to wrap up this paper on "Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR," the result is a positive correlation between v2 and Pz,two for lambda hyperons, which needs further testing <ref:2610.25989#pg1,hyperons with event shape engineering in Au+Au collisions at RHIC-STAR>.

Mira: And it’s important to remember that they are still working with uncertainties regarding contributions not directly correlated with the elliptic flow when they look at the intercept.

Lev: And ultimately, this work shows how we can use event shape engineering to measure local polarization as a function of elliptic flow, which opens up new avenues for connecting these two observables in future experiments.

The paper's summary: Kai: So we're looking at this paper on measuring local polarization of hyperons using event shape engineering in gold-gold collisions at RHIC-STAR, and what it actually says is that they’ve done the first direct measurement linking anisotropic flow to local polarization.

Mira: Exactly, it’s about figuring out how those vorticities created by the anisotropic flow actually lead to a specific spin alignment in the hyperons made in those collisions.

Lev: They used event shape engineering, which means they selected events with different types of collective motion—different magnitudes of elliptic flow—to measure the polarization as a function of that flow.

Kai: The main point is that model calculations suggest there are two different ways this polarization can be generated, shear-induced and vorticity-induced, and they might cancel each other out.

Mira: And because those contributions can have opposite signs, the final result depends really on which theoretical implementation you use. That’s why testing this experimentally is so important.

Lev: They found that for lambda plus anti-lambda hyperons, the elliptic flow v2 shows a clear positive dependence on the reduced flow vector magnitude q2 across all event plane settings.

Kai: And for polarization, Pz,two measured using both the TPC event plane and TPC q2 also showed a slight positive dependence on that reduced flow vector magnitude.

Mira: That suggests there’s some sort of correlation between how strongly those particles flow and their local spin alignment. The positive slope they found for Pz,two with respect to v2 is around two point five sigma.

Lev: That correlation is interesting, but they also pointed out that the intercept of the linear fit for Pz,two as a function of v2 might be getting information from things not directly tied to the elliptic flow.

Kai: So what this means for us is that we have a measurement showing this possible link between anisotropic flow and hyperon spin alignment in these heavy-ion collisions.

Mira: It’s providing constraints on those theoretical models because it tests whether those shear and vorticity contributions actually cancel out or if one of them remains the dominant factor.

Lev: The consistency they found across different event plane and q2 combinations suggests that any biases from shared particles are small within their current uncertainties.

Kai: The combination using the TPC-Full event plane and TPC-Full q2 gives them the best statistical sensitivity, but they used other setups to check for those potential shared particle effects.

Mira: They also focus on how they extract the signal purity, P, by fitting an invariant mass distribution with a Student’s t-function and a first-order polynomial for the background in each centrality bin.

Lev: That extraction method is critical because it determines how much of what you see is actual hyperon polarization versus just statistical noise or background contamination.

Kai: So, this paper sets up the connection between flow magnitude and spin alignment, which really helps us build a predictive simulation of hyperon spin alignment in these kinds of heavy-ion collisions.

Mira: It’s a solid step forward in understanding the underlying mechanism driving polarization in those dense environments.

The paper's improvements: Tom: So we're looking at how this paper suggests improving their measurement of local polarization using event shape engineering in Au+Au collisions, and what those suggestions mean for future work.

Kai: The authors are suggesting they apply these event shape engineering measurements to larger datasets from the sqrt(sNN) equals two hundred GeV Au+Au collision runs.

Mira: They want to see if these same trends continue when you move to a different energy scale, which helps confirm if this relationship is general or just specific to the lower energies they measured.

Lev: From an engineering standpoint, running that measurement on sqrt(sNN) equals two hundred GeV would be a big data challenge; we’d need to manage all that extra noise and background without losing the precision they got at nineteen point six GeV.

Kai: The team is also saying that the consistency across different event plane and q2 combinations points to the fact that biases from shared particles are small within their current uncertainty budget.

Mira: They think this consistency is good because it means their interpretation of the data isn't being skewed by some hidden artifact in how they reconstructed those hyperons.

Lev: That’s smart; if you get consistent results across different selection methods, it tells you the physics signal is real, not just a quirk of your selection criteria for the particles.

Kai: The paper also highlights that the combination using TPC-Full event plane and TPC-Full q2 gives them the best statistical sensitivity for this measurement.

Mira: That setup is good because it maximizes their ability to see any subtle correlation between flow and polarization, even if it's small.

Lev: But they also mention that other configurations, like using TPC-Sub or EPD-Full, are important checks to see if those results hold up when you change the way you define your event plane.

Kai: So the authors are basically saying that while their current setup is best for statistical power, testing it with those other setups is necessary to build confidence in the result.

Mira: The big picture here is that they’re laying groundwork for using these flow measurements as a way to probe spin physics in dense matter more deeply.

Lev: If we can get this kind of correlation locked down, it gives us a template for how we might model hyperon spin alignment in even denser environments later on.

Kai: It’s moving the goal from just measuring polarization to actually understanding the mechanism that generates it through collective motion.

Conclusion: Kai: So to wrap up, this paper on "Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR" shows they've established a measurable correlation between anisotropic flow and the local spin alignment of lambda hyperons.

Mira: It’s a big step because it gives us a direct way to test whether those vorticities from the anisotropic flow actually cause that polarization we expect to see in the particles.

Lev: It’s interesting because they tested multiple event plane combinations, which helps rule out simple selection biases, even if their setup for the best statistical sensitivity was one specific configuration.

Kai: So what this means is that we have a concrete experimental data point showing that flow magnitude matters when you look at the spin alignment in these heavy-ion collisions.

Mira: It constrains our theoretical models by showing how the shear and vorticity components interact, which is where those two contributions can either add up or cancel out.

Lev: For error correction, this means if we’re building a detector to measure these spins, we need to be careful how we model the flow effects because they are clearly tied to the event shape you select.

Kai: We've seen a positive slope between v2 and Pz,two for lambda plus anti-lambda hyperons with about two point five sigma significance.

Mira: That correlation is suggestive, but remember that intercept on the v2 axis is just an extrapolation to zero flow, so we can’t trust that part of the signal yet.

Lev: The overhead for running this on real hardware will be managing all those complex selections you mentioned earlier; it won't be a constant time measurement at all.

Kai: We’ve seen how they use event shape engineering to get these results, and it opens up a clear pathway to use flow measurements as probes for spin physics in dense matter.

Mira: It’s not just about measuring polarization anymore; it’s about understanding the dynamics that create that polarization in the first place.

Lev: Moving forward, we need to see how this scales up to higher energies like sqrt(sNN) equals two hundred GeV Au+Au collisions to see if these flow trends persist.

Kai: So, we’ve looked at "Measurements of local polarization of hyperons with event shape engineering in Au+Au collisions at RHIC-STAR," and the correlation between flow and polarization is there, even if it needs more testing.

Mira: It’s a solid result that tightens the constraints on how we model the spin physics in these heavy-ion systems.

Lev: And for us, it gives us a better idea of what kind of noise and systematic effects we need to filter out when we try to measure anything this sensitive.

More episodes

← Home