Correlations and fluctuations of flow with event shape engineering in Pb-Pb and Xe-Xe collisions at the LHC

summary

The gist

Measurements of anisotropic flow provide some of the strongest experimental constraints on the collective expansion and transport properties of the quark–gluon plasma produced in ultra-relativistic…

In short

This study used Event Shape Engineering to investigate correlations between flow harmonics (v2, v3, v4) in Pb-Pb and Xe-Xe collisions at the LHC. By selecting events based on reduced flow vectors, researchers disentangled the linear and nonlinear components of the fourth harmonic (v4), showing that the linear part is independent of initial geometry while the nonlinear part strongly depends on it.

Key concepts

Anisotropic Flow Coefficients (vn)
These coefficients describe how particles are preferentially emitted in different directions. v2 measures elliptic flow, v3 measures triangular flow, and v4 measures quadrangular flow. They quantify the collective expansion of the quark-gluon plasma after a collision.
Event Shape Engineering (ESE)
This technique involves selecting specific events based on the magnitude of a reduced flow vector (qn). This method allows researchers to probe different initial-state geometries, effectively controlling or sampling how initial spatial anisotropies influence the final collective flow harmonics.
Linear vs. Nonlinear Flow Modes
The paper separates the fourth harmonic (v4) into two parts: a linear component (V L 4), which is expected to depend on the fourth-order initial eccentricity, and a nonlinear component (V NL 4), which depends on the square of the ellipticity (epsilon2). This separation reveals how different aspects of initial geometry couple to the QGP's response.
Symmetric Cumulants (SC(n,m))
These are mathematical tools used to quantify the strength of correlations between different flow harmonics, such as v2 and v4. By measuring SC(3,2) and SC(4,2), researchers gained a more direct way to understand how initial geometry influences these correlations.

Terminology used across episodes

This episode discusses

The paper

Correlations and fluctuations of flow with event shape engineering in Pb-Pb and Xe-Xe collisions at the LHC · Read on arXiv

ALICE Collaboration

European Organization for Nuclear Research · CERN

Measurements of anisotropic flow provide some of the strongest constraints on the collective expansion and transport properties of the quark-gluon plasma produced in ultra-relativistic heavy-ion collisions. In this paper, correlations and fluctuations of the anisotropic flow coefficients v 2, v 3, and v 4 are measured in Pb-Pb and Xe-Xe collisions at sqrt s = 5.02 and 5.44 TeV, respectively, with the ALICE detector. The Event Shape Engineering technique, based on the reduced flow vector q n, is used to study flow correlations for different initial-state geometries. A strong anticorrelation between v 2 and v 3 and a positive correlation between v 2 and v 4 are observed. A small anticorrelation is seen between v 3 and v 4. From the v 2 - v 4 correlation, the linear and nonlinear components of v 4 are extracted and compared to those extracted using multiparticle correlations. The linear and nonlinear components of v 4 are also measured directly as a function of q 2 for the first time in Pb-Pb and Xe-Xe, revealing a strong coupling of the nonlinear term to the initial-state ellipticity epsilon 2, while the linear component shows little dependence on initial-state geometry. Additionally, the coupling coefficient χ 4,22, which measures the nonlinear contribution of v 2 squared to v 4, is extracted and shows little dependence on q 2, except in very central collisions. The effects of flow fluctuations for constrained initial-state geometries are studied for the first time using Event Shape Engineering with the ratio of v 22 and v 24; the results show that collisions with the lowest q 2 exhibit more significant v 2 fluctuations compared to the unbiased ratio.

Transcript

Introduction to the show: ident: Nuclear Experiment. The day in nuclear experiment: beams, targets and what came out.

Kai: We're looking at the paper: "Correlations and fluctuations of flow with event shape engineering in Pb-Pb and Xe-Xe collisions at the LHC".

Mira: Here's the gist of the paper. Measurements of anisotropic flow provide some of the strongest experimental constraints on the collective expansion and transport properties of the quark–gluon plasma produced in ultra-relativistic heavy-ion collisions The paper investigates correlations and fluctuations of anisotropic flow coefficients v2, v3, and v4 in Pb–Pb and Xe–Xe collisions at the LHC using Event Shape Engineering to study initial-state geometries Flow Harmonics and Initial State Geometry The anisotropic flow of particles is typically described by coefficients, vn, of a Fourier decomposition of the azimuthal distribution of produced particles The elliptic flow, v2, the triangular flow, v3, the quadrangular flow, v4 and the correlations between them are what this paper concerns If the initial state is characterized by the spatial anisotropies εn, where ε2 quantifies its ellipticity while ε3 reflects its triangularity then v2 ∝ ε2 and v3 ∝ ε3 However, v4 comprises both a “linear” contribution associated with the cumulant-defined eccentricity ε′4 and a “nonlinear” component that depends on ε22 Disentangling these linear and nonlinear contributions provides additional insights into the QGP’s hydrodynamic response, in particular η/s Event Shape Engineering Analysis The Event Shape Engineering technique, based on the reduced flow vector qn, is used to study flow correlations for different initial-state geometries The ESE technique consists of selecting events based on the magnitude of the final-state reduced flow vector qn By examining the dependence of flow harmonics on qn, one can probe the coupling strength between the linear and nonlinear flow modes For example, since the nonlinear contributions to v4 are proportional to ε22, they are expected to vary significantly with q2, while the linear contributions (∝ ε4) should remain largely independent of the initial-state geometry Correlation Patterns and Extraction Methods Symmetric cumulants, denoted as SC(n,m), quantify the strength of the correlation between different flow harmonics v2n and v2m Previous measurements in Pb–Pb collisions show positive correlations in SC(4,2) and anticorrelations in SC(3,2) The fourth–order flow vector can be decomposed as V4 = V L 4 +V NL 4 = V L 4 + χ4,22(V2)2 To determine the unbiased values of vL4 and vNL4 using the v2–v4 correlation obtained with ESE, the correlation is fitted in each centrality interval with the functional form, v4 = q c 0 + (c1v2)2 The linear and nonlinear flow modes of v4 are then extracted as vL4 = c0, vNL4 = qv24 −c20 Findings on Nonlinear Coupling and Fluctuations The nonlinear component is obtained from mixed-harmonic correlations, and the linear component from the remaining contribution to v24 The results clearly demonstrate the separation of the linear and nonlinear parts of v4, with vL4 measured through multi-particle cumulants displaying no dependence on q2, in accordance with the expectations since it is primarily determined by the fourth order initial eccentricity, ε4 The nonlinear component displays a strong q2-dependence, except for in the most central collisions in which the geometrical anisotropy is weaker The results qualitatively agree with the normalized symmetric cumulants SC(3,2) and SC(4,2), demonstrating a more direct way to understand the correlations by investigating sensitivity to the initial geometry of collisions The assumption that χ4,22 remains independent of ε2 is largely confirmed, although some dependence on q2 is observed in the most central (0–5%) collisions The findings deepen understanding of the role of initial-state geometric anisotropies in the development of anisotropic flow harmonics in heavy-ion collisions The consistency of the findings across both Pb–Pb and Xe–Xe systems reinforces the robustness of ESE and flow harmonic correlations as tools for probing the properties of the QGP and its sensitivity to the initial geometry of collisions Furthermore, these results demonstrate the unique capability of ESE to experimentally control the initial geometry of heavy-ion collisions, providing a powerful approach to disentangle the effects of the initial conditions from the subsequent collective evolution of the QGP The study also reveals that ESE impacts the magnitude of flow fluctuations Acknowledgements The ALICE Collaboration would like to thank all its engineers and technicians for their invaluable contributions to the construction of the experiment and the CERN accelerator teams for the outstanding performance of the LHC complex The ALICE Collaboration gratefully acknowledges the resources and support provided by all Grid centres and the Worldwide LHC Computing Grid (WLCG) collaboration The ALICE Collaboration acknowledges several funding agencies for their support in building and running the ALICE detector In addition, individual groups or members have received support from various institutions References

Paper summary: Kai: Looking at this paper, "Correlations and fluctuations of flow with event shape engineering in Pb-Pb and Xe-Xe collisions at the LHC," it really boils down to how we can use these measurements to study the initial geometry one <ref:2611.08473#pg2>.

Mira: The authors are using measurements from lead lead and xenon xenon collisions at two different energies, five point zero two and five point four four tera electron volts respectively one <ref:2611.08473#pg2>. They found that they can directly link flow correlations, like v2 and v4, to the underlying initial conditions two <ref:2611.08473#pg3>.

Lev: The implication is that we have a more direct way to understand the QGP's properties because we aren't just relying on average overlap calculations, but on these measured correlations fifteen sixteen <ref:2611.08473#pg2>.

Kai: They demonstrated that Event Shape Engineering is a powerful tool for experimental control over initial geometry two <ref:2611.08473#pg3>. It lets us disentangle those initial conditions from the subsequent collective evolution of the QGP one <ref:2611.08473#pg2>.

Mira: So what we gain is a richer understanding of how fluctuations in the initial spatial distribution feed into those final flow harmonics.

Lev: The paper also points out that one limitation is that they have to be careful about how their setup handles nuclear deformation, especially in the most central collisions where that deformation contributes to the initial state eccentricity three <ref:2611.08473#pg1>.

Kai: So this work confirms that ESE and flow harmonic correlations are robust tools for probing the properties of the QGP and its sensitivity to those initial conditions across both lead-lead and xenon-xenon systems.

Conclusion: Kai: So this paper, "Correlations and fluctuations of flow with event shape engineering in Pb-Pb and Xe-Xe collisions at the LHC," it’s really about using those flow measurements to map out the initial shape of the colliding nuclei one.

Mira: The authors are looking at both lead lead collisions and xenon xenon collisions at five point zero two and five point four four tera electron volts, respectively, to see how those correlations link directly to what happened right when they hit two.

Lev: Basically, it shows that we can move past just using the average overlap of the nuclei; these flow numbers tell us about those initial momentum anisotropies fifteen.

Kai: They use Event Shape Engineering—that reduced flow vector qn—to specifically probe how initial state geometries influence the subsequent expansion of the quark-gluon plasma two. It’s a way to pull those initial conditions out of the final particle data sixteen.

Mira: What they highlight is that nuclear deformation, like in xenon, definitely plays a role in how anisotropic flow develops, especially when you look at more central collisions forty-two. The fluctuations in the initial spatial distribution feed into these final flow harmonics in a way we hadn't fully mapped out before.

Lev: If you think about building a simulation for this stuff, this means your initial state setup has to be sensitive to these specific correlations between v2 and v4 thirty-six. It sets a standard for how detailed our models need to get about those initial conditions.

Kai: The real thing they show is that we can cleanly separate the linear part of the flow from the nonlinear part by looking at how much it depends on q two one. We can isolate those geometric influences in a way that’s really useful for understanding the QGP's nearly perfect fluid behavior twelve.

Mira: It confirms that using these symmetric cumulants, SC(n,m), gives us a clearer picture of the relationships between different flow harmonics than just looking at them one by one thirty-nine. We see how v4 isn't just simple geometry; it has this nonlinear component that depends on the square of v2.

Lev: So, if we can reliably extract that nonlinear part, it’s a huge step for error correction research because it tells us exactly what kind of initial state fluctuations our real hardware needs to account for thirty-six.

Kai: It really demonstrates the power of this technique across different systems and energies—lead lead and xenon xenon—to test the fundamental physics of how matter behaves under extreme conditions.

Mira: This work opens up a new way to look at the connection between where we start and how the system evolves, which is crucial for any future heavy-ion experiment we design. We need to keep pushing those Event Shape Engineering techniques to see what else these correlations reveal about initial geometry.

More episodes

← Home