Neutron tagging of heavy lepton pair production at RHIC and LHC energies
summary
The gist
Neutron tagging of heavy lepton pair production at RHIC and LHC energies calculates cross sections for electron-positron pair production in ultraperipheral gold and lead collisions across various…
In short
The study calculates cross sections for electron-positron pair production in ultraperipheral heavy ion collisions at RHIC and LHC energies using neutron tagging. By modeling nuclear excitation and neutron emission probabilities, the researchers compare theoretical predictions with experimental data from STAR, ALICE, ATLAS, and CMS across different collision energies. The methods successfully describe lepton pair production in these collisions.
Key concepts
- Neutron Tagging
- This technique involves using the production of a heavy lepton pair to tag the presence or absence of a subsequent neutron emission during the collision. This helps categorize events into specific classes, such as those with zero neutrons (0n0n) or one neutron (1n1n), allowing for detailed analysis of nuclear interactions.
- S-Matrix Elements and F(q)
- The free pair production cross section is derived by integrating S-matrix elements over the impact parameter space, resulting in a complex nine-dimensional integral F(q). This function F(q) describes how the production probability depends on momentum transfer q, which is then fitted to a simple exponential form to simplify calculations.
- Nuclear Excitation Mechanisms
- The probability of nuclear excitation is calculated by integrating photon flux with the total photoabsorption cross section. This cross section includes contributions from various mechanisms like the Giant Dipole Resonance (GDR) and non-GDR regions, which describe how the nucleus responds to incoming photons.
- Poisson Statistics for Neutron Emission
- Neutron emission probabilities are modeled using Poisson statistics based on the quantity S/b^2. This statistical approach allows researchers to calculate probabilities for observing no neutrons (P(0n)(b)), a single neutron (P(1n)(b)), or at least one neutron (P(Xn)(b)) as a function of the impact parameter b.
Terminology used across episodes
This episode discusses
- Neutron tagging of heavy lepton pair production at RHIC and LHC energies · Paper Radio
- Acoplanarity of QED pairs accompanied by nuclear dissociation in ultra-peripheral heavy ion collisions
The paper
Neutron tagging of heavy lepton pair production at RHIC and LHC energies · Read on arXiv
Department of Physics, Istanbul Technical University
We calculated cross sections for γγ to+- (=e,μ,τ) production in ultraperipheral gold and lead collisions and compare our results with recent measurements from the STAR, ALICE, ATLAS, and CMS experiments at center of mass energies sqrt s NN =200 GeV, sqrt s NN =2.76 TeV, and sqrt s NN =5.02 TeV. The calculations are performed within lowest order quantum electrodynamics (LO QED) using a Monte Carlo technique for calculating the impact parameter dependent probability, and subsequently combined with neutron emission probabilities associated with Coulomb excitation of the nuclei. These neutron emission scenarios are modeled using a Poisson statistics, allowing the cross sections to be categorized into experimentally relevant neutron classes: 0n0n, 0nXn, XnXn, and inclusive (0n0n+0nXn+XnXn) production. To enable a direct comparison with experiments, fiducial phase space restrictions corresponding to the acceptance of each detector are implemented.
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Neutron tagging of heavy lepton pair production at RHIC and LHC energies".
Mira: Here's the gist of the paper. Neutron tagging of heavy lepton pair production at RHIC and LHC energies calculates cross sections for electron-positron pair production in ultraperipheral gold and lead collisions across various center-of-mass energies, comparing theoretical results with experimental measurements from STAR, ALICE, ATLAS, and CMS (Eq.
Kai: 2).
Mira: The free pair production cross section is derived by integrating S matrix elements over impact parameter b, resulting in a nine-dimensional integral F(q) which is calculated using Monte Carlo integration (Eq.
Kai: 6).
Paper summary: Kai: So we're looking at this paper now called "Neutron tagging of heavy lepton pair production at RHIC and LHC energies". Basically, the whole point is to calculate how often you get electron, muon, or tau pairs when gold or lead nuclei collide in ultraperipheral collisions.
Mira: Right, it’s about using neutron tagging as a tool to figure out these cross sections for those lepton pairs across different collision energies. It claims they've compared their lowest order quantum electrodynamics calculations with experimental measurements from STAR, ALICE, ATLAS, and CMS at three different center of mass energies: two hundred GeV, two point seven six TeV, and five point zero two TeV <ref:2607.11224#pg1,STAR, ALICE, ATLAS, and CMS>.
Lev: And the core idea is that they use a Monte Carlo technique to figure out the probability depending on the impact parameter b for this pair production, then they combine that with neutron emission probabilities from Coulomb excitation of those nuclei forty-two.
Kai: It sounds like they're trying to get a clear picture of how these different collision systems produce these lepton pairs. The paper claims it gives a satisfactory description of lepton pair production in ultraperipheral collisions even though it doesn't include higher order quantum electrodynamics corrections Conclusion.
Mira: Yeah, and the paper specifically points out that while those higher order QED corrections aren't included, the overall agreement between their calculations and experimental results across different systems is generally good, although they do note some deviations when looking at higher invariant masses in figure nine.
Lev: From an engineering standpoint, what this means is that if you were to run this on real hardware, you’d be doing a lot of work to model those impact parameter dependent probabilities using the S matrix elements and then fitting that function F of q with a single exponential form, like F of q equals F zero times e minus a times q seven.
Kai: That sounds complex. So how do they handle the different lepton species? They mention electron, muon, and tau pair production.
Mira: They show the lepton properties relevant for pair production in table one, giving you the electron mass, muon mass, and tau mass along with their specific coupling constants and electric charge two <ref:2607.11224#pg2,lepton properties relevant for pair production>. Electron production is easy at RHIC energies because of the energy conditions mentioned on page two.
Lev: But tau production is strongly suppressed even at LHC energies because of that energy condition being much harder to meet for those heavier leptons two <ref:2607.11224#pg2,tau production is strongly suppressed>. So, the paper notes that while electron and muon pair production are achievable at higher energies, tau pair production has significantly smaller cross sections two <ref:2607.11224#pg2,electron and muon pair production>.
Kai: And what about the neutron tagging part? They use Poisson statistics based on the quantity S over b squared to describe probabilities for zero neutrons, one neutron, or at least one neutron emission fifteen-seventeen.
Mira: That decomposition lets them categorize the cross sections into experimentally relevant classes: zero n zero n, zero n one n, and at least one neutron emission class, which they call inclusive production <ref:2607.11224#pg1>.
Lev: And what they do is compare these calculated cross sections for different neutron emission scenarios—zero to two neutrons—with the experimental data from RHIC at two hundred GeV and LHC at two point seven six TeV and five point zero two TeV three <ref:2607.11224#pg1>.
Kai: They found that for instance, at RHIC energies, their tagged zero n zero n cross section is about "four-five percent above the measured STAR value" as well as other calculations they mentioned Table four-one <ref:2607.11224#pg3>.
Mira: That's a pretty specific comparison. They also noted that it exceeds the STARLight zero n zero n calculation by twenty-four point five percent Table four-one. It’s interesting how consistent their results are when compared to those other theoretical calculations they used three thousand thirty-two.
Lev: The way they model the probability of no hadronic interaction using a Glauber approach is important because it allows for a more realistic treatment than just using simple hard sphere cutoffs Eq. three Table three <ref:2607.11224#pg1>. That's where you get some of that real physical modeling going on forty-two.
Kai: So, what does this paper actually mean for us as people who aren't in the lab? It’s about confirming these theoretical models with actual experimental data from major facilities.
Mira: It means that the methods they developed—using Monte Carlo integration to get the impact parameter dependent probability and then combining it with those neutron emission probabilities—are capable of giving us a decent description of lepton pair production in ultraperipheral collisions Conclusion.
Lev: The main thing for me is that this approach, when applied to real hardware, shows where the overhead really lands because you're dealing with these complex integrals and fits involving the Fourier-Bessel transform <ref:2607.11224#pg3>.
Kai: So looking at the title again, "Neutron tagging of heavy lepton pair production at RHIC and LHC energies", it really boils down to using neutrons as a tag to probe these lepton pairs across different collision systems.
Mira: Exactly. It's not just about measuring the pairs; it’s about using the neutron emission channels—like zero n one n or one n one n—to understand how the initial nuclear interaction is influencing that pair production process Conclusion.
Lev: And it shows that even if you don't include those higher order QED corrections, you can still get a satisfactory description of what’s happening in these ultraperipheral collisions Conclusion.
Conclusion: Kai: So we've been looking at how scientists use neutron tagging to study heavy lepton pair production at really high energies, across different collision machines like RHIC and the LHC, and this paper lays out the final picture of what they found.
Mira: Yeah, it’s about taking these complex nuclear collisions and using neutron emission patterns to map out the underlying physics of those lepton pairs.
Kai: The authors are basically showing how they took those tough experimental measurements from STAR, ALICE, ATLAS and CMS and put them back into a model that uses Monte Carlo integration to figure out the probability of pair production depending on impact parameter.
Lev: From my side, it’s interesting because they use this fit for the momentum transfer q with a single exponential form F of q equals F zero times e minus a times q, which means they’re trying to describe how quickly that dependence on momentum transfer falls off.
Mira: Exactly, and what's important is that even without those higher order quantum electrodynamics corrections—which are usually where the big refinements are—they still get a pretty good description of the lepton pair production in these ultraperipheral collisions.
Kai: So it seems like this method, using these neutron emission classes like zero n zero n or one n one n, is a solid way to describe what’s happening at those high energies.
Lev: It's solid because they are comparing it directly against data from both the RHIC and LHC energies, which validates that the approach works across different collision systems.
Mira: The main implication here is that we have a simplified theoretical analysis for heavier leptons like muons and taus, which used to be really hard to pin down experimentally.
Kai: So it’s less about finding a new fundamental law and more about using neutron tagging as a practical tool to get better experimental information relevant to those dimuon predictions.
Lev: It’s just about getting the data right for what you actually want to measure, which is pretty useful when you're building hardware for error correction.
Mira: And that sets up a lot of questions about how much more we need to go into those higher order corrections before we can make these models perfectly accurate.
More episodes
- 2610.38463-Gauge-parameter cancellation and finite form factors in one-loop quark scattering in the refined Gribov-Zwanziger framework
- 2610.37198-Searches for new particle physics by methods of classical and neutrino astronomy
- 2511.15779-SURFing to the Fundamental Limit of Jet Tagging
- 2505.01492-Photo- and Hadrodisintegration constraints on massive relics decaying into neutrinos
- 2505.20389-Dispersion relation of the neutrino plasma: Unifying fast, slow, and collisional instabilities
- 2511.10731-Keeping It Renormalizable: Minimal Baryogenesis induced Asymmetric Dark Matter
- 2404.04021-Vacuum correlations of the stress-energy-momentum tensor with constituent quarks
- 2503.02931-Relativistic Navier-Stokes description of the quark-gluon plasma radial flow
- 2606.06105-Bulk viscosity of a binary mixture: the role of the intra-species interaction
- 2607.03343-First look at the evaluation of two-loop Feynman integrals for radiative return processes