Melting LHC detectors: A novel search for stopped long-lived particles

summary

The gist

Particles at the TeV scale with lifetimes of a year or longer could have been abundantly produced at the LHC yet escaped detection because of backgrounds…

In short

The method searches for long-lived particles produced at the LHC that become trapped in detector materials, which usually escape detection due to background noise. By melting solid targets like silicon or liquid argon and using iterative centrifugation followed by mass spectrometry, researchers can recover these trapped particles. This background-free technique has the potential to discover gluinos up to 3 TeV at the High-Luminosity LHC.

Key concepts

Liquefaction
This is the process of chemically transforming solid detector materials, such as silicon detectors, into a liquid form at room temperature. This step is necessary because the subsequent recovery technique relies on processing liquid samples to effectively separate and concentrate the heavy particles of interest.
Iterative Centrifugation
This involves repeatedly spinning the liquid sample at high speeds. The goal is to progressively reduce the volume of the sample while ensuring that only the heaviest constituents remain concentrated. This technique helps isolate rare, heavy particles from a larger volume of material.
Mass Spectrometry
After centrifugation, mass spectrometry is used to identify and measure trace concentrations of heavy particles within the sample. This provides single-particle sensitivity, allowing researchers to detect very small amounts of these long-lived particles that might otherwise be lost in the background noise.

Terminology used across episodes

This episode discusses

The paper

Melting LHC detectors: A novel search for stopped long-lived particles · Read on arXiv

Julia L. Gonski, Peter W. Graham, Surjeet Rajendran, Harikrishnan Ramani, Samuel S. Y. Wong

SLAC National Accelerator Laboratory · Leinweber Institute for Theoretical Physics, Stanford University Department of Physics, Kavli Institute for Particle Astrophysics and Cosmology Department of Physics, William H Miller III Department of Physics and Astronomy Johns Hopkins University Department of Physics and Astronomy University of Delaware Bartol Research Institute Department of Physics University of Washington

DOI: 10.1103/1x1q-mncc

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "Melting LHC detectors".

Mira: Here's the gist of the paper. Particles at the TeV scale with lifetimes of a year or longer could have been abundantly produced at the LHC yet escaped detection because of backgrounds, and could still be trapped within detector materials The method involves recovering these trapped particles from liquid samples by melting silicon detectors, extracting liquid argon from the electromagnetic calorimeter, or constructing a large water pool near ATLAS or CMS This technique allows for single-particle sensitivity in macroscopic samples through iterative centrifugation followed by mass spectrometry It has the potential to discover gluinos up to 3 TeV in mass at the HL-LHC and improve existing limits for other long-lived particles The Search Strategy The proposed search method is a background-free technique that relies on searching for anomalously heavy atoms embedded within detector material The procedure consists of three main steps: liquefaction, iterative centrifugation, and mass spectrometry Liquefaction is necessary for solid samples like silicon, requiring chemical transformation into a liquid form at room temperature The liquid sample is then subjected to iterative centrifugation to progressively reduce its volume while retaining the heaviest constituents Finally, mass spectrometry is employed to identify trace concentrations of heavy particles with single-particle sensitivity Gluino Production and Trapping The benchmark particle used in the simulation is the long-lived gluino in split supersymmetry (SUSY) Gluinos are copiously produced at the LHC, and those with low lab-frame velocity, vlab ≲ 0.1, are of particular interest because they can stop in detector material The production cross section is enhanced by Sommerfeld ladder diagrams arising from virtual gluon exchange The kinetic energy distribution in the mg˜ = 2–3 TeV mass range was found to be independent of the gluino mass, with a peak at E − mg˜ ≈ 140 GeV Target Material Sensitivity The study considers three primary target materials within or near ATLAS: silicon detectors, liquid argon in the EM calorimeter, and a hypothetical custom-built external water pool Silicon detectors receive the highest gluino flux because of their proximity to the collision point, resulting in high sensitivity per unit volume The liquid argon target is convenient as it is already in liquid phase, and its stopped fraction is roughly ∼ 4 × 10−3 at mg˜ = 2.5 TeV The external water pool offers maximal accessibility and flexibility, reaching a projected reach of mg˜ = 2.9 TeV Projected Discovery Reach The projected 95% CL limits on the gluino pair-production cross section show that the external, custom-built water pool reaches mg˜ = 2.9 TeV at the HL-LHC The combined search of silicon, argon, and intervening materials (IM) in the barrels up to the end of the EM calorimeter reaches mg˜ = 2.8 TeV The method's advantage over conventional dE/dx search is apparent at the HL-LHC in Figure 10b, where the external, custom-built 108 L-water pool reaches mg˜ = 2.9 TeV Other Particle Searches The approach can extend its reach to other long-lived particles with a momentum distribution similar to the gluino, such as the stop squark (t˜) For the water target, a production cross section sensitivity of σ ∼ 0.027 fb would translate to a mass of mt˜ ∼ 2.0 TeV for the stop squark in the decoupled limit The projected limit on the τ2e from silicon detector is 1.2 TeV, improving over current bounds by ATLAS dE/dx search The method is background-free and does not suffer from larger pile-up, hence fully realizing the benefit of an improvement in Lint at the HL-LHC This pushes the boundaries for the heaviest particle discoverable at the LHC The scalability of centrifugation and mass-spectrometric analysis to macroscopic samples, combined with the unique background-free signature, makes this a powerful and cost-effective addition to the LHC’s physics program More broadly, it opens a new avenue for repurposing retired detector components into precision instruments for discovering new physics long after collider operations have concluded Acknowledgments We thank Kaustubh Agashe, Asimina Arvanitaki, Masha Baryakhtar, David Cyncynates, Savas Dimopoulos, Isabel Garcia Garcia, Reza Ebadi, Chris Hill, Rebecca K.

Kai: Leane, Kuunal Mahtani, Matt McQuinn and Martin Napetschnig for discussions We thank representatives of Eppendorf and Ming Yang for helpful discussion of centrifuges This work was supported in part by NSF Grant No.

Mira: PHY-2310429, NSF Grant No.

Kai: PHY-2515007, Simons Investigator Award No.

Title and authors: Kai: So we're looking at "Melting LHC detectors: A novel search for stopped long-lived particles." It sounds pretty intense. This paper is about finding particles that are long-lived, meaning they travel for a while before they decay, but they still managed to get trapped inside the detector material.

Mira: I think the title itself tells you a lot about what's new here. The idea of "melting" detectors suggests using liquid samples as a way to look for these particles that would otherwise be missed because of backgrounds. It moves away from just looking at decay signatures, which are suppressed for long lifetimes.

Lev: From an error correction standpoint, the real question is what kind of background we're talking about here. If we're looking for something that stops in a detector, how do you distinguish that signal from the standard model stuff hitting those liquid samples?

Kai: Exactly. The authors are using gluinos in split supersymmetry as their main example because they can be copiously produced at the LHC, and they focus on those with very low lab-frame velocities, less than zero point one.

Mira: And that low velocity is key because it means these particles are more likely to stop inside the material instead of just passing through. It sets up this whole search strategy based on the idea that these slow particles should leave a different signature.

Lev: But what about the actual experimental setup? If we're melting silicon or extracting liquid argon, we need to make sure that process itself doesn't introduce new noise or bias the measurement of those ionization energy losses, dE/dx.

Kai: The paper outlines a three-step procedure: liquefaction, then iterative centrifugation, and finally mass spectrometry. That’s the core experimental method they are proposing for these long-lived candidates.

Mira: So it’s not just one kind of detector material; they look at silicon detectors, liquid argon from the electromagnetic calorimeter, or even a custom water pool near ATLAS or CMS. It shows flexibility in where you look for this phenomenon.

Lev: The iterative centrifugation part sounds like it’s designed to progressively remove the lighter components of the sample while keeping the heaviest stuff intact for that mass spectrometry step. That’s a clever way to enhance sensitivity in macroscopic samples.

The paper's summary: Kai: So, what they are actually summarizing is this background-free technique. They suggest that instead of searching for decay products, we can search for anomalously heavy atoms embedded within the detector material itself.

Mira: That’s the big shift. Instead of waiting for a particle to leave a track or decay, you are looking at the properties of a heavy particle that has physically stopped in some material. This is what they call searching for heavy stable charged particles, or HSCPs.

Lev: They use the idea that these slow particles have higher ionization energy losses, dE/dx, according to the BetheBloch equation. They reconstruct those dE/dx profiles from charge deposition along tracks in silicon detectors and cross-check it with time of flight observables.

Kai: The paper uses the long-lived gluino in split supersymmetry as their benchmark particle for this search. They simulate how these gluinos are produced at the LHC and then model their stopping within different materials.

Mira: They detail the simulation of gluon production, including Sommerfeld ladder diagrams which enhance the cross section, and they look at kinetic energy distributions that are independent of the gluino mass in a specific range.

Lev: The paper projects a projected reach for gluino detection based on these simulations across different target materials. They are looking at how sensitive each material is to this specific class of slow particles.

Kai: They specifically mention that the external, custom-built water pool can reach a projected mass of two point nine TeV for the gluino pair production cross section at the high luminosity of the HL-LHC.

Mira: It’s interesting how they tie this into existing limits. For instance, their combined search across silicon, argon, and intervening materials in the barrels up to the end of the electromagnetic calorimeter reaches a projected reach of two point eight TeV for gluino pair production.

The paper's improvements: Lev: The main improvement they are pushing is that this method is background-free. They say it doesn't suffer from larger pile-up, which means you get to use the full power of the HL-LHC data without worrying about having too many simultaneous collisions interfering with your signal.

Kai: That’s a big deal for experimental design because it means we can really test these limits at the high luminosity we expect. It bypasses some of the issues you run into with traditional dE/dx searches where pile-up can smear things out.

Mira: They also suggest extending this reach to other long-lived particles besides the gluino, like the stop squark, t tilde. For example, they estimate a production cross section sensitivity for this particle in the water target that translates to a mass of two point zero TeV in the decoupled limit <ref:2512.12023#pg2>.

Lev: The paper also touches on improving limits for other types of long-lived particles. They mention a projected limit on the tau two electron tau tau two e from silicon detector reaching one point two TeV, which is an improvement over what existing dE/dx searches can achieve <ref:2512.12023#pg1>.

Kai: So the improvements are about extending the mass reach for gluinos and other particles while using a search strategy that is inherently less susceptible to pile-up noise. It’s about finding new ways to see those long-lived signals.

Mira: They also emphasize the scalability of this technique. The fact that you can apply centrifugation and mass spectrometry to macroscopic samples is what makes it cost-effective for exploring these specific long-lived scenarios compared to trying to build massive, specialized detectors for every single target.

Conclusion: Kai: So, to wrap up the paper "Melting LHC detectors: A novel search for stopped long-lived particles," the authors are arguing that this background-free approach is a powerful way to push the limits of what we can see at the LHC.

Mira: They suggest it’s not just about finding a heavier particle; it’s about discovering a whole new class of signal—the heavy stable charged particles—by leveraging detector material properties in liquid form.

Lev: From an engineering side, they are showing that this method can translate to real hardware by looking at how the stopping fraction changes depending on the gluino mass and the specific target material you choose. That simulation work is crucial for guiding detector design.

Kai: So, if we look at it from what this means for us right now, it pushes the boundaries for the heaviest particle discoverable at the LHC by using a technique that handles pile-up better than standard methods.

Mira: And more broadly, it opens up a new avenue for repurposing retired detector components into precision instruments to search for physics long after the collider operations have concluded.

Lev: I think what this paper really shows is that we can get concrete projections on discovery potential based on target material sensitivity, which is something real hardware teams need to plan their next experimental phases around.

Kai: So that's the picture with "Melting LHC detectors: A novel search for stopped long-lived particles." We’ll be talking about new physics in the next one.

More episodes

← Home