Identifying (1380) and (1430) in the J/psi to pi reaction
summary
The gist
We study the J/ψ → ΛπΣ reaction by looking at the ¯ π +Λ mass distribution at low energies, in search of signals for the low lying Σ+ states <ref:2607.02485#pg2>.
In short
The study investigated low-energy $ar{ u} ext{p} + ar{ u} ext{L}$ mass distributions from $J/ ho o ar{ u} ext{p}ar{ u}$ reactions to find evidence for the $\Sigma(1380)$ and $\Sigma(1430)$ states. Initial analysis suggested the $\Sigma(1380)$ was needed when only considering $\pi+\Lambda$ interaction. However, including the $\pi\Sigma$ interaction eliminated the need for this state, suggesting other coupled channels fill the low-energy strength.
Key concepts
- Low Lying States
- The research aimed to identify two specific excited states, $\Sigma(1380)$ and $\Sigma(1430)$, in the reaction by examining how the mass distribution of $\bar{ u} ext{p} + ar{ u} ext{L}$ changes at low energies. The goal was to confirm their existence through experimental data from collaborations like Belle.
- SU(3) Singlet Approach
- This is a theoretical framework used to describe the $J/ ho$ production process, relating the production weights of different states. It helps model how the initial $J/ ho$ particle couples to the final $\pi\Lambda\Sigma$ system by using symmetry principles.
- Coupled Channel Dynamics
- This refers to how different possible interactions, like $\pi+\Lambda$ and $\pi\Sigma$, influence each other in the reaction. The analysis showed that when both interactions are considered together, they create interference terms that explain the observed mass distribution.
- Interference Terms ($t_2$ and $t_3$)
- These terms arise when different partial waves interfere with each other during the decay process. Analyzing these interference terms helps distinguish genuine resonant signals from background noise in the data, especially when considering how different masses ($M_{12}, M_{23}$) affect the interaction.
Terminology used across episodes
This episode discusses
- Identifying (1380) and (1430) in the J/psi to pi reaction · Paper Radio
- Unveiling the elusive sigma(1380) resonance through coupled-channel dynamics in lambda c+ to eta pi+ lambda reaction
- Study of the J/psi to lambda sigma bar 0 eta reaction
- lambda(1670) production in the psi(3686) to lambda lambda eta reaction
The paper
Identifying (1380) and (1430) in the J/psi to pi reaction · Read on arXiv
Wen-Tao Lyu, Eulogio Oset, De-Min Li, En Wang
School of Physics, Zhengzhou University · Departamento de Física Teγrica and IFIC, Centro Mixto Universidad de Valencia-CSIC Institutos de Investigaci༱on de Paterna
We study the J/ψ to Λπ Σ reaction by looking at the π+ Λ mass distribution at low energies, in search of signals for the low lying Σ+ excited states. Apart from a clear signal of the Σ(1385) (3/2+) state, we find a smaller peak for the predicted Σ(1430) (1/2-), which has already been confirmed by the Belle Collaboration. A first analysis, considering only the πΛ interaction, shows that the low energy part of the spectrum is better reproduced including contributions from the Σ(1430) and the predicted Σ(1380)(1/2-) state that has been claimed before from analyses of different experiments. However, when we consider the π Σ interaction the need for the Σ(1380) disappears.
DOI: 10.1140/epjc/s10052-026-16496-0
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "Identifying (1380) and (1430) in the J/psi to pi reaction".
Mira: Here's the gist of the paper. We study the J/ψ → ΛπΣ reaction by looking at the ¯ π +Λ mass distribution at low energies, in search of signals for the low lying Σ+ states <ref:2607.02485#pg2>.
Kai: Search for Low Lying States The research focuses on identifying two specific excited states, the Σ(1380) and Σ(1430), in the J/ψ → ΛπΣ reaction by examining the ¯ π +Λ mass distribution at low energies <ref:2607.02485#pg2>.
Mira: The authors found a clear signal for the Σ(1385)(3/2+) state, but also a smaller peak corresponding to the predicted Σ(1430)(1/2−) state, which has been confirmed by the Belle Collaboration <ref:2607.02485#pg2>.
Kai: A first analysis considering only the πΛ interaction reproduces the low energy part of the spectrum including contributions from both states <ref:2607.02485#pg2>.
Title and authors: Kai: So we're looking at this paper titled "Identifying (one thousand three hundred eighty) and (one thousand four hundred thirty) in the J/psi to pi reaction <ref:2607.02485#pg1>." It’s about studying the mass distribution of pi plus lambda at low energies in that J/psi to lambda pi sigma decay.
Mira: Yeah, it’s focusing on searching for these two specific low-lying sigma states, the Sigma(one thousand three hundred eighty) and the Sigma(one thousand four hundred thirty), within that reaction process <ref:2607.02485#pg1>. It's basically a hunt for evidence of these states in the data.
Lev: From my side, what I see immediately is that they're trying to map out how these resonances show up in the mass spectrum, which means they are looking at how the mass distribution changes with energy and angle.
Kai: The paper sets up a formalism using an SU(three) singlet approach for the J/psi, which helps relate the production weights to these different interactions between mesons <ref:2607.02485#pg1>.
Mira: That formalism involves terms like t-tilde, which is a function of two things: the invariant mass M12 and the cosine of theta, cos theta. That means they are looking at how it depends on both energy scales and angular distribution simultaneously.
Lev: And when you look at the differential decay width calculation, they mention that interference between certain terms becomes relevant when you consider the dependence on M23.
Kai: They're checking how this interference plays out, especially when looking at the M23 dependence, which is crucial for understanding the structure of these reactions.
Mira: Now, here’s a point they make: a first analysis considering only the pi plus lambda interaction reproduces the low energy part of the spectrum by including contributions from both states.
Lev: So that means in that initial simplified view, you don't strictly *need* the Sigma(one thousand three hundred eighty) contribution to get a good fit for the low energy data <ref:2607.02485#pg1>.
Kai: But then they switch things up and consider the pi plus sigma interaction, and suddenly, they say the need for the Sigma(one thousand three hundred eighty) state disappears entirely <ref:2607.02485#pg1>.
Mira: That’s interesting because it suggests that when you include the pi plus sigma interaction, other channels can fill in that missing strength in the low energy region of that pi plus lambda spectrum.
Title and authors: Lev: It means adding coupled channels changes what we think is necessary to explain the data, which is a big thing for real hardware.
Kai: The paper also discusses how they build their training signal by fitting parameters C, a-tilde, and b-tilde to the measured differential decay width of pi plus lambda against invariant mass.
Mira: They show that replacing the Sigma(one thousand four hundred thirty) resonance with the Sigma(one thousand three hundred eighty) in equation six yields a very good fit to that data on its own <ref:2607.02485#pg1>.
Lev: So for training purposes, it seems the Sigma(one thousand three hundred eighty) is a good placeholder if you only look at one of those possibilities <ref:2607.02485#pg1>.
Kai: But when they add contributions from both the Sigma(one thousand four hundred thirty) and the Sigma(one thousand three hundred eighty), they get a good fit to all the data points, filling in that missing strength around one thousand four hundred thirty MeV <ref:2607.02485#pg1>.
Mira: That means including both states together is what gets you the best fit across the whole spectrum, which is what you need for a complete picture.
Lev: The paper also points out that adding just the Sigma(one thousand four hundred thirty) contribution alone suggests that we might need measurements with high statistics to see a clear signal, as they expect it to be small <ref:2607.02485#pg1>.
Kai: So what this means for us is that we can't just look at one channel in isolation; the presence of coupled channels is necessary to get a solid picture of these resonances.
Mira: Exactly. The final conclusion is that the need for the Sigma(one thousand three hundred eighty) contribution disappears when you consider the pi plus sigma interaction alongside other allowed coupled channels <ref:2607.02485#pg1>.
Lev: That's a strong statement, implying that if we look at the full dynamics, we don't have to rely on any single resonance to explain everything in that low energy region.
Kai: So, looking at the J/psi to pi reaction, it seems the focus shifts from finding just one specific state to understanding how multiple coupled channels contribute together.
Title and authors: Mira: Right. The paper shows that a careful analysis is required because subtle contributions can change the conclusions concerning whether we actually need that Sigma(one thousand three hundred eighty) resonance to explain some experimental data <ref:2607.02485#pg1>.
Lev: So, the result isn't a simple yes or no about needing a state; it’s more about which interaction dynamics are present in the full process.
Kai: We should keep an eye on how these coupled channel effects manifest in other reactions, since that’s where the real physics is happening.
Mira: Definitely. The paper emphasizes that including the pi plus sigma interaction provides a nonnegligible contribution to the pi plus lambda mass distribution and interferes with the dominant Sigma(one thousand three hundred eighty-five) contribution <ref:2607.02485#pg1>.
Lev: And they make it clear that these results are independent on the ratio of two parameters in their theory, only depending on the strength of that Sigma(one thousand three hundred eighty-five) term, which makes their conclusions quite solid <ref:2607.02485#pg1>.
Kai: So, for anyone listening who just wants the simple picture, remember this: a careful analysis is required to determine if a Sigma(one thousand three hundred eighty) state is truly necessary for certain experimental data <ref:2607.02485#pg1>.
Mira: The main implication I see is that we need to be more thorough when looking at these low energy regions; appealing results in the first part are not enough on their own.
Lev: And from an engineering standpoint, it means we can't just focus on fitting one channel; the overhead of including coupled channels in our models really lands somewhere significant.
Kai: So, to wrap up this look at identifying (one thousand three hundred eighty) and (one thousand four hundred thirty) in the J/psi to pi reaction: a careful analysis is needed because subtle contributions can change the conclusions concerning whether we actually need that Sigma(one thousand three hundred eighty) resonance <ref:2607.02485#pg1>.
Mira: The final conclusion drawn is that the need for the Sigma(one thousand three hundred eighty) contribution has disappeared when considering the pi plus sigma interaction together with other allowed coupled channels <ref:2607.02485#pg1>.
Lev: It means we stop looking for a single missing piece and start looking at the whole system of interactions to see what fits.
Kai: We'll keep an eye on these coupled channel effects in other reactions, because that’s where the real structure of these particles lies.
The paper's summary: Kai: So, to recap, this paper is looking at how we measure the mass of pi plus lambda in that J/psi decay at low energies to see if we can find two specific states, the Sigma(one thousand three hundred eighty) and the Sigma(one thousand four hundred thirty).
Mira: Exactly. It’s a search for these low-lying excited states in that reaction by looking closely at the mass distribution of pi plus lambda.
Lev: From an engineering side, they're using this data to train a signal, trying to figure out the best way to fit those resonances into their model parameters C, a-tilde, and b-tilde.
Kai: And what they found is that when they only consider the simple pi plus lambda interaction part of the theory, they still see some structure in the low energy spectrum.
Mira: But then things get interesting when you introduce the pi plus sigma interaction; that's where you start seeing a change in what resonance is necessary to describe everything.
Lev: So, it means if we only look at one channel, like just pi plus lambda, we might think we need the Sigma(one thousand three hundred eighty) to explain some of the low energy data points.
Kai: But when they include that sigma interaction term, they say that need for the Sigma(one thousand three hundred eighty) actually disappears.
Mira: That suggests that other parts of the dynamics in those coupled channels are doing the job and filling in whatever strength was missing there at one thousand three hundred eighty MeV.
Lev: It points to how important it is to have a complete picture of all those interactions when you're building your error correction hardware, because you don't want to miss a channel that contributes.
Kai: The analysis shows that including both the Sigma(one thousand four hundred thirty) and the Sigma(one thousand three hundred eighty) contributions together gives them a good fit across the entire spectrum around one thousand four hundred thirty MeV.
Mira: It confirms that adding both states is what makes the model work for all their data points, it's not just one of them standing alone.
Lev: And they’re giving us some guidance on what to expect experimentally; they say measurements with high statistics are going to be needed to see a clear signal for the Sigma(one thousand four hundred thirty), which they predict will be small.
Kai: So, the main implication is that we can't just focus on one simple interaction when we look at these low energy regions; the coupled channels matter a lot.
Mira: It’s not about finding one single resonance to explain everything; it’s about understanding how all these interactions work together in the full system.
Lev: It means for hardware running this kind of measurement, you need to model all those coupled channels, otherwise, you're just guessing what strength term needs to be there.
Kai: This leads us into how they built their training signal earlier—they used fitting techniques to test which resonance works best by replacing one with the other in equation six.
Mira: That method helps them isolate the effect of adding that second state, showing precisely where the strength is being filled up in the mass spectrum.
Lev: It’s a rigorous way to check your model assumptions, which is crucial when you're trying to build something that has to work on real hardware with limited resources.
Kai: So, we see here that subtle issues, like adding those sigma interactions and coupled channels, can completely change the conclusion about whether a specific resonance like the Sigma(one thousand three hundred eighty) is actually required.
Mira: It’s a reminder that in these complex systems, you have to be careful about what assumptions you make about which channels are open.
Lev: And that’s exactly where your error correction overhead lands; if your model misses those coupled channel contributions, the real physics is just going to look wrong.
Kai: So, moving forward, we need to keep an eye on how these coupled channel effects show up in other reactions because that’s where the real structure of these particles lies.
The paper's improvements: Tom: So, to recap, this paper is looking at how we measure the mass of pi plus lambda in that J/psi decay at low energies to see if we can find two specific states, the Sigma(one thousand three hundred eighty) and the Sigma(one thousand four hundred thirty).
Kai: Yeah, it’s focusing on identifying those two specific excited states in that J/psi to pi reaction by examining the mass distribution of pi plus lambda at low energies.
Mira: That means they are searching for evidence of the Sigma(one thousand three hundred eighty) and Sigma(one thousand four hundred thirty) states in that decay channel.
Lev: They’re using this data to train a signal, trying to figure out the best way to fit those resonances into their model parameters C, a-tilde, and b-tilde.
Kai: And what they found is that when they only consider the simple pi plus lambda interaction part of the theory, they still see some structure in the low energy spectrum.
Mira: But then things get interesting when you introduce the pi plus sigma interaction; that's where you start seeing a change in what resonance is necessary to describe everything.
Lev: So, it means if we only look at one channel, like just pi plus lambda, we might think we need the Sigma(one thousand three hundred eighty) to explain some of the low energy data points.
Kai: But when they include that sigma interaction term, they say that need for the Sigma(one thousand three hundred eighty) actually disappears.
Mira: That suggests that other parts of the dynamics in those coupled channels are doing the job and filling in whatever strength was missing there at one thousand three hundred eighty MeV.
Lev: It points to how important it is to have a complete picture of all those interactions when you're building your error correction hardware, because you don't want to miss a channel that contributes.
Kai: The analysis shows that including both the Sigma(one thousand four hundred thirty) and the Sigma(one thousand three hundred eighty) contributions together gives them a good fit across the entire spectrum around one thousand four hundred thirty MeV.
Mira: It confirms that adding both states is what makes the model work for all their data points, it's not just one of them standing alone.
Lev: And they’re giving us some guidance on what to expect experimentally; they say measurements with high statistics are going to be needed to see a clear signal for the Sigma(one thousand four hundred thirty), which they predict will be small.
Kai: So, the main implication is that we can't just focus on one simple interaction when we look at these low energy regions; the coupled channels matter a lot.
Mira: It’s not about finding one single resonance to explain everything; it’s about understanding how all these interactions work together in the full system.
Lev: It means for hardware running this kind of measurement, you need to model all those coupled channels, otherwise, you're just guessing what strength term needs to be there.
Kai: This leads us into how they built their training signal earlier—they used fitting techniques to test which resonance works best by replacing one with the other in equation six.
Mira: That method helps them isolate the effect of adding that second state, showing precisely where the strength is being filled up in the mass spectrum.
Lev: It’s a rigorous way to check your model assumptions, which is crucial when you're trying to build something that has to work on real hardware with limited resources.
Kai: So, we see here that subtle issues, like adding those sigma interactions and coupled channels, can completely change the conclusion about whether a specific resonance like the Sigma(one thousand three hundred eighty) is actually required.
Mira: It’s a reminder that in these complex systems, you have to be careful about what assumptions you make about which channels are open.
Lev: And that’s exactly where your error correction overhead lands; if your model misses those coupled channel contributions, the real physics is just going to look wrong.
Kai: So, moving forward, we need to keep an eye on how these coupled channel effects show up in other reactions because that’s where the real structure of these particles lies.
Conclusion: Kai: So, we've gone over how they use data from that J/psi to pi reaction to search for the Sigma(one thousand three hundred eighty) and Sigma(one thousand four hundred thirty) states.
Mira: Right, it boils down to checking if those specific resonance contributions are actually necessary when you look at the low energy mass distribution.
Lev: From an engineering standpoint, what this means is that your error correction model needs to account for all these coupled channels, because missing one would throw off the whole picture.
Kai: The paper shows that including the pi plus sigma interaction really changes what we think is required to explain the data, suggesting that other dynamics are doing the work there.
Mira: It’s a reminder that in these complex systems, you have to be careful about what assumptions you make about which channels are open when you try to find a single missing piece.
Lev: If your model misses those coupled channel contributions, the real physics is just going to look wrong on real hardware because the overhead lands somewhere significant.
Kai: The final conclusion of this paper, "Identifying (one thousand three hundred eighty) and (one thousand four hundred thirty) in the J/psi to pi reaction," is that the need for that Sigma(one thousand three hundred eighty) contribution disappears when you consider those other coupled channels.
Mira: It's a careful analysis showing that the need for one specific resonance isn't always there if you look at the full interaction dynamics.
Lev: That’s important because it tells us where to focus our modeling efforts, so we aren't just chasing any signal that looks good in isolation.
Kai: We learned a lot about how subtle interactions can shift the conclusions about what physical particles actually exist in these energy regions.
Mira: It gives us a better roadmap for looking at these low energy spectra across different reactions.
Lev: Next up, we’ll look at how those same coupled channel effects show up in other reactions, which is where the real structure of these particles lies.
More episodes
- 2610.38463-Gauge-parameter cancellation and finite form factors in one-loop quark scattering in the refined Gribov-Zwanziger framework
- 2610.37198-Searches for new particle physics by methods of classical and neutrino astronomy
- 2511.15779-SURFing to the Fundamental Limit of Jet Tagging
- 2505.01492-Photo- and Hadrodisintegration constraints on massive relics decaying into neutrinos
- 2505.20389-Dispersion relation of the neutrino plasma: Unifying fast, slow, and collisional instabilities
- 2511.10731-Keeping It Renormalizable: Minimal Baryogenesis induced Asymmetric Dark Matter
- 2404.04021-Vacuum correlations of the stress-energy-momentum tensor with constituent quarks
- 2503.02931-Relativistic Navier-Stokes description of the quark-gluon plasma radial flow
- 2606.06105-Bulk viscosity of a binary mixture: the role of the intra-species interaction
- 2607.03343-First look at the evaluation of two-loop Feynman integrals for radiative return processes