Extremely high-energy bremsstrahlung in matter
summary
The gist
The theory of bremsstrahlung e → eγ by extremely high energy electrons passing through ordinary matter has been qualitatively incomplete Our analysis covers the full range of ultra-relativistic…
In short
This work extends the theory of bremsstrahlung (electron energy loss via photon emission) for ultra-relativistic electrons by incorporating complex quantum effects. It refines the Landau-Pomeranchuk-Migdal (LPM) effect by including medium-induced pair production and a dielectric effect, allowing for more accurate energy loss predictions across different energy regimes.
Key concepts
- LPM Effect
- The LPM effect describes how the rate of bremsstrahlung is suppressed when an electron loses energy through many interactions in a medium. This suppression occurs because the time it takes for the electron to emit a photon (formation time) becomes longer than the average time between scattering events, effectively 'smearing out' the emission process.
- Pair Production Disruption
- At extremely high energies, bremsstrahlung photons can disappear by converting into electron-positron pairs within the medium. This paper investigates how this subsequent pair production affects the initial LPM suppression, showing it can either further suppress or enhance the rate depending on the relative timescales involved.
- Dielectric Effect
- This concept accounts for the fact that in a dense medium, a photon gains an effective mass (mγ). This 'dielectric effect' becomes important when considering very low-energy photons (kγ) and allows for more accurate energy loss calculations than simpler models that ignore this photon mass.
- Bethe-Heitler Rate
- This is the baseline calculation for bremsstrahlung, which ignores quantum interference and medium effects. It represents the rate of photon emission if the electron interacted with a single, isolated nucleus without any LPM or dielectric corrections applied.
Terminology used across episodes
This episode discusses
- Extremely high-energy bremsstrahlung in matter · Paper Radio
- Suppression of Bremsstrahlung and Pair Production due to Environmental Factors
- Revisiting extremely high energy QED bremsstrahlung in matter: large modifications to the LPM effect
- Electron and Photon Interactions in the Regime of Strong LPM Suppression
- Electroproduction of electron-positron pair in a medium
- Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
- Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
- Strongly vs. weakly coupled in-medium showers: energy stopping in large- N f QED
The paper
Extremely high-energy bremsstrahlung in matter · Read on arXiv
Peter Arnold, Joshua Bautista, Omar Elgedawy, مامد Iqbal
University of Virginia · State Key Laboratory of Nuclear Physics and Technology, Institute of Quantum Matter, South China Normal University · Guangdong Basic Research Center of Excellence for Structure and Fundamental Interactions of Matter, Guangdong Provincial Key Laboratory of Nuclear Science, Guangzhou · CPHT, CNRS, Ecole Polytechnique, Institut Polytechnique de Paris · National Centre for Physics
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Extremely high-energy bremsstrahlung in matter".
Mira: Here's the gist of the paper. The theory of bremsstrahlung e → eγ by extremely high energy electrons passing through ordinary matter has been qualitatively incomplete Our analysis covers the full range of ultra-relativistic electron and photon energies (subject to a few simplifying approximations) LPM Effect Fundamentals Very high energy electrons or positrons passing through ordinary matter lose energy predominantly through showering via repeated bremsstrahlung (e → eγ) and pair production (γ → ee¯) mediated by the electric fields inside atoms The bremsstrahlung rate for a highenergy electron passing through the Coulomb field of a single atomic nucleus was first calculated by Bethe and Heitler in 1934 Landau and Pomeranchuk noted that the quantum duration of bremsstrahlung (known as the formation or coherence time tform) grows with electron energy and eventually becomes larger than the mean free time between elastic scatterings from the medium Migdal made the first fully quantum-mechanical calculation of this suppression, now known as the Landau-Pomeranchuk-Migdal (LPM) effect Parametrically, the LPM bremsstrahlung rate is suppressed compared to the Bethe-Heitler rate as dΓ/dkγ L P M ∼ min 1, s kγELPM E(E − kγ)!
Kai: × dΓ/dkγ BH Revisiting Pair Production Disruption Galitsky and Gurevich noted that at extremely high energy there are regions of (kγ, E) where the formation time for bremsstrahlung is large enough to encompass not only multiple scattering from the medium but also the subsequent disappearance of the bremsstrahlung photon via medium-induced pair production They argued qualitatively that premature disappearance of the photon would cause even further suppression of (1) by an additional factor of Sextra ∼ min1,(Γpairtform) −1, where Γpair is the pair production rate and tform is the bremsstrahlung formation time if the effects of pair production on bremsstrahlung are ignored Recently, Arnold and Bautista argued that the effect of subsequent pair production is to disrupt LPM suppression and so significantly increase the LPM rate compared to (1) by an additional factor of order Sextra ∼ max (1, Γpairtform), which is large when tform ≫ 1/Γpair Extension to Lower Energies This extension requires including effects of the electron mass m, which we ignored in our earlier analysis For sufficiently small (but still very high energy) kγ, one must also include the medium-induced mass mγ of the photon, known in this context as the “dielectric effect” The paper presents our full result and also discusses simpler limiting formulas in various regions of (kγ, E) Limiting Rate Formulas Table I summarizes the limiting formulas for the differential energy loss rate
dΓ/dxγ: LPM or
dΓ/dxγ: LPM in various regions of fig.
Mira: 2 The Bethe-Heitler rate, which does not include the LPM and dielectric effects, is approximately dΓ/dxγ BH ≃ αqˆ 6πm2 / (2Pe→γ(xγ) + xγ Inclusion of Overlapping Pair Production Fig.
Kai: 2b presents our results for the LPM /BH ratio from including the effects of overlapping pair production on the original LPM bremsstrahlung rate By comparing figs.
Title and authors: Kai: Let's talk about the title and the authors of this paper, "Extremely high-energy bremsstrahlung in matter." It’s by Peter Arnold and Joshua Bautista from the University of Virginia and South China Normal University, respectively.
Mira: They are both working on different sides but their combined work here is focused on taking that basic theory of bremsstrahlung, which is the electron emitting a photon, and pushing it to its absolute limits.
Lev: When you see "extremely high-energy," that tells you immediately we're talking about things far beyond what standard calculations cover.
Kai: Right. It’s not just high energy; it’s the kind of energy where quantum effects in a dense medium start to dominate the interaction dynamics, which is what makes this paper relevant for us working with particle production at colliders.
Mira: The authors are essentially saying that our previous understanding was qualitatively incomplete because it didn't fully account for how pair production messes with the LPM effect.
Lev: They’re starting from a known framework and trying to add these new, more complex physical processes on top of it, which is usually where the real challenges in high-energy physics lie.
Kai: So, we’re looking at how they frame this problem—how they define the boundaries where these different effects kick in.
Mira: They're setting up a systematic way to look at things by defining the characteristic scales, like the formation time and those energy scales for photon energy relative to electron energy that matter.
Lev: That framework is necessary because without it, you can’t just plug in numbers; you need a way to know which mathematical approximation is actually valid for the specific physical situation you're studying.
Kai: So they are building a map of the different regimes based on those scales before diving into the calculations themselves.
Mira: It’s a lot of groundwork, showing them exactly where their analysis is strong and where they need to introduce those more complex terms like dielectric effects or overlapping pair production corrections.
Lev: That’s smart because it prevents them from just throwing in extra physics without knowing if it’s actually going to change the result significantly.
Kai: They are essentially defining the scope of what this paper is capable of calculating—the full range of ultra-relativistic electron and photon energies that they can handle.
Mira: It sets expectations for what we should expect from their results—they are promising a more complete picture than what was available before, even if they have to make some simplifying approximations in the initial steps.
Lev: And then there’s the caveat about those approximations, which is always there when you tackle problems this complex; you have to be careful where you stop and where you start.
The paper's summary: Kai: Now let’s talk about what they actually summarized in this paper. They’re revisiting the suppression of bremsstrahlung by the LPM effect, but now with pair production accounted for quantum disruption as a key element.
Mira: In simple terms, they are taking the standard picture of how electrons lose energy by emitting photons and then scattering off medium particles, which is what causes the LPM suppression, and they're adding that subsequent pair production step.
Lev: So you’re saying if the photon turns into an electron-positron pair while it’s trying to form a bremsstrahlung photon, that messes up the process itself.
Kai: Exactly. They show that this interaction happens when the formation time for the bremsstrahlung photon is long enough to allow for multiple scattering *and* for pair production to occur in between.
Mira: And they quantify this effect by introducing Sextra, which is a factor that either cuts the LPM suppression or enhances it depending on whether the pair production time or bremsstrahlung formation time is shorter.
Lev: That Sextra factor is basically a switch that tells us whether we're looking at an enhancement scenario or a disruption scenario for the LPM suppression itself.
Kai: They also extend this to include lower photon energies, introducing the electron mass and what they call the dielectric effect of the photon when it’s moving very fast.
Mira: This means their calculation is no longer just focused on super high energy photons; it now covers a much wider spectrum down to energies below that characteristic scale, ELPM.
Lev: So, they are covering a broader physical picture than before, which is essential because experiments don't always give you perfectly monochromatic input.
Kai: They also show how this combination of effects changes the energy loss rate across different regimes defined by the photon energy versus electron energy ratio and that scale ELPM.
Mira: The main result is a set of limiting formulas in Table I that lets you find the appropriate formula for any given region when you look at those ratios.
Lev: Those formulas are useful because they’re not just abstract math; they give you a way to actually predict the energy loss rate based on what physical conditions are present in your setup.
Kai: So, essentially, this paper is giving us a comprehensive toolkit for modeling how these processes work across all the important energy scales.
Mira: It’s a lot of detailed work showing that the physics is more intricate than just using the simplest suppression formula we had before.
Lev: And it’s important because it shows us exactly where our current models are missing pieces that need filling in to match reality.
The paper's improvements: Kai: So what are the specific improvements they suggest for this paper? They are focusing on making the calculations more robust by incorporating quantum disruption from pair production into the existing LPM effect.
Mira: They’re moving beyond just looking at multiple scattering and adding that subsequent pair production step to see how it modifies the original suppression, rather than just ignoring it or treating it as a separate issue.
Lev: That means they are not just adding another correction; they’re analyzing the interaction between those two processes—bremsstrahlung formation time and pair production time.
Kai: Right. They calculated an additional enhancement factor Sextra that can be large when the bremsstrahlung formation time is much longer than the pair production rate, which is a key detail.
Mira: That’s where they distinguish between when subsequent pair production disrupts suppression versus when it increases it, based on whether that ratio is small or large.
Lev: So they're providing a concrete way to tell the difference between those two scenarios using that Sextra factor, which is a bit more nuanced than just having one suppression term.
Kai: They’ve also improved the framework by including effects of the electron mass, which was ignored before, and introducing what they call the dielectric effect of the photon when k is small.
Mira: That dielectric effect accounts for the medium-induced mass of the photon, which is a necessary addition for accuracy when looking at lower energy photons.
Lev: That means they’re addressing deficiencies in their earlier analysis by adding necessary physical ingredients that are required when you move away from the ultra-relativistic limit.
Kai: They’ve also refined how they calculate the rate by including overlapping pair production, which shows that this process arrests the rapid fall of the LPM rate in those specific energy regions.
Mira: So, they’re not just showing *that* it happens; they are showing *how* it modifies the underlying physics at a more fundamental level.
Lev: That moves them from a descriptive model to something that could potentially be used for actual prediction, which is a big step in terms of what’s possible.
Kai: The final improvement is putting all these pieces together into the full formula for the LPM energy-loss rate, which they present in the appendix.
Mira: It gives us that full result where you combine everything—the soft photon limit and the corrections from pair production—which is a very complete expression of how this works.
Lev: That full formula is what you need to actually run simulations on real hardware because it has all the necessary details for accurate energy loss predictions.
Conclusion: Kai: So wrapping up on the paper "Extremely high-energy bremsstrahlung in matter," this work gives us a much more detailed look at how electrons lose energy in matter by incorporating pair production disruption into the LPM effect and adding the dielectric effect for lower photon energies.
Mira: It shows that when you consider the interplay between multiple scattering and pair production, we can get a more complete picture of suppression or enhancement depending on those time scales.
Lev: For us, it means if we ever build hardware to measure this, we have a better roadmap of what those calculations actually look like when you account for all the necessary quantum details.
Kai: It’s about taking the basic idea and giving it the quantitative backbone needed to compare theory with potential experimental data across a wider range of energies.
Mira: They’re showing that this physics is more intricate than just using the simplest suppression formula we had before, requiring us to account for those subtle medium effects.
Lev: And it’s important because it shows us exactly where our current models are missing pieces that need filling in to match reality so we can improve them.
Kai: It’s a lot of detailed work, and the full result presented in this paper is what you need to actually run simulations on real hardware because it has all the necessary details for accurate energy loss predictions.
Mira: So that’s what they achieved with "Extremely high-energy bremsstrahlung in matter," providing a more complete picture than what was available before.
Lev: It’s a solid piece of work that helps guide the next steps in understanding how these ultra-relativistic processes behave when we try to measure them.
More episodes
- 2610.38463-Gauge-parameter cancellation and finite form factors in one-loop quark scattering in the refined Gribov-Zwanziger framework
- 2610.37198-Searches for new particle physics by methods of classical and neutrino astronomy
- 2511.15779-SURFing to the Fundamental Limit of Jet Tagging
- 2505.01492-Photo- and Hadrodisintegration constraints on massive relics decaying into neutrinos
- 2505.20389-Dispersion relation of the neutrino plasma: Unifying fast, slow, and collisional instabilities
- 2511.10731-Keeping It Renormalizable: Minimal Baryogenesis induced Asymmetric Dark Matter
- 2404.04021-Vacuum correlations of the stress-energy-momentum tensor with constituent quarks
- 2503.02931-Relativistic Navier-Stokes description of the quark-gluon plasma radial flow
- 2606.06105-Bulk viscosity of a binary mixture: the role of the intra-species interaction
- 2607.03343-First look at the evaluation of two-loop Feynman integrals for radiative return processes